컨텍스트 정보 추가

모델에 필요한 모든 정보가 있다고 가정하는 대신 모델이 문제를 해결하는 데 필요한 안내와 정보를 프롬프트에 포함시킬 수 있습니다. 이 컨텍스트 정보는 모델이 요청된 작업의 제약조건과 세부정보를 이해하는 데 도움이 됩니다.

효과적인 문맥 정보에는 다음이 포함됩니다.

  • 응답을 생성할 때 참조할 모델에 대한 배경 정보(컨텍스트)
  • 모델 동작을 조정하기 위한 규칙 또는 사전 프로그래밍된 응답

예시

다음 예시에서는 모델에 라우터에 대한 문제 해결 안내를 제공하도록 요청합니다.

컨텍스트 정보 없음 
What should I do to fix my disconnected wifi? The light on my Google Wifi router is yellow and
blinking slowly.
  
1. **Check the Cables:**
- Make sure that all cables are securely connected to your Google Wifi router and modem.
- Try replacing the cables with new ones to ensure they are not faulty.


2. **Reboot the Router:**
- Unplug your Google Wifi router and modem from the power outlet.
- Wait for at least 30 seconds.
- Plug the modem and router back in and wait for them to start up.


3. **Factory Reset the Router:**
- Resetting the router will restore it to its default settings.
- Find the small reset button on the back of the router.
- Press and hold the reset button with a paper clip or similar object for 10 seconds.
- Release the button and wait for the router to restart.


4. **Check Your Internet Connection:**
- Use a wired connection to connect a device directly to your modem.
- If the internet works, the issue may be with your router.
- If the internet still doesn't work, contact your Internet Service Provider (ISP).


5. **Update Router's Firmware:**
- Check if there is a firmware update available for your Google Wifi router.
- Download and install the latest firmware update from the Google Wifi app.


6. **Interference and Obstacles:**
- Make sure the router is not near electronic devices that can cause interference, like microwaves or cordless phones.
- Remove any obstacles between the router and your devices, such as furniture or thick walls.


7. **Change Wi-Fi Channel:**
- In the Google Wifi app, go to Settings > Network & General > Advanced Networking.
- Try changing the Wi-Fi channel to a less congested one.


8. **Contact Google Support:**
- If you've tried the above steps and the issue persists, contact Google support for further assistance.

이 응답은 라우터 또는 LED 표시기 표시등의 상태와 관련이 없는 일반적인 문제 해결 정보처럼 보입니다.

특정 라우터의 응답을 맞춤설정하려면 응답을 제공할 때 참조할 컨텍스트로 라우터의 문제 해결 가이드를 프롬프트에 추가할 수 있습니다.

컨텍스트 정보 포함 
Answer the question using the text below. Respond with only the text provided.
Question: What should I do to fix my disconnected wifi? The light on my Google Wifi router is yellow and blinking slowly.

Text:
Color: Slowly pulsing yellow
What it means: There is a network error.
What to do:
Check that the Ethernet cable is connected to both your router and your modem and both devices are turned on. You might need to unplug and plug in each device again.

Color: Fast blinking yellow
What it means: You are holding down the reset button and are factory resetting this device.
What to do:
If you keep holding down the reset button, after about 12 seconds, the light will turn solid yellow. Once it is solid yellow, let go of the factory reset button.

Color: Solid yellow
What it means: Router is factory resetting.
What to do:
This can take up to 10 minutes. When it's done, the device will reset itself and start pulsing white, letting you know it's ready for setup.

Color: Solid red
What it means: Something is wrong.
What to do:
Critical failure. Factory reset the router. If the light stays red, contact Wifi customer support.
  
Check that the Ethernet cable is connected to both your router and your modem and both devices are turned on. You might need to unplug and plug in each device again.

다음 단계