Connect to Cloud SQL for SQL Server from Compute Engine

Connect to Cloud SQL for SQL Server from Compute Engine

MySQL   |  PostgreSQL   |  SQL Server

Learn how to deploy a sample app on your Linux or Windows based Compute Engine VM instance connected to a SQL Server instance by using the Google Cloud console and a client application.

Assuming that you complete all the steps in a timely manner, the resources created in this quickstart typically cost less than one dollar (USD).

Before you begin

Note: The name you use for your project must be between 4 and 30 characters. When you type the name, the form suggests a project ID, which you can edit. The project ID must be between 6 and 30 characters, with a lowercase letter as the first character. You can use a dash, lowercase letter, or digit for the remaining characters, but the last character cannot be a dash.

1. Sign in to your Google Cloud account. If you're new to Google Cloud, create an account to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.

2. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

   Note: If you don't plan to keep the resources that you create in this procedure, create a project instead of selecting an existing project. After you finish these steps, you can delete the project, removing all resources associated with the project.

   Go to project selector

3. Make sure that billing is enabled for your Google Cloud project.

4. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

   Note: If you don't plan to keep the resources that you create in this procedure, create a project instead of selecting an existing project. After you finish these steps, you can delete the project, removing all resources associated with the project.

   Go to project selector

5. Make sure that billing is enabled for your Google Cloud project.

6. Enable the Cloud APIs necessary to run a Cloud SQL sample app on a Compute Engine VM instance.

   Console

   Click the Enable APIs button to enable the API required for this quickstart.

   Enable APIs

   This enables the following API:

   • Cloud SQL Admin API

   gcloud

   Install the gcloud CLI which provides command-line access to your Google Cloud resources. The gcloud CLI is used to run the gcloud CLI commands presented throughout this quickstart. All the commands are formatted to be run in a terminal or a Powershell window.

   Run the following gcloud command:

   gcloud services enable sqladmin.googleapis.com

   This command enables the following API:

   • Cloud SQL Admin API

Set up Cloud SQL

Create a Cloud SQL instance

Public IP

Console

Create an instance with a public IP address

1. In the Google Cloud console, go to the Cloud SQL Instances page.

   Go to Cloud SQL Instances

2. Click Create instance.
3. Click SQL Server.
4. In the Instance ID field, enter quickstart-instance.
5. In the Password field, enter a password for the sqlserver user. Save this password for future use.
6. In the Choose region and zonal availability section, select Single zone.
7. Expand the Show Configurations section.
8. In the Machine Type drop-down list, select Lightweight.
9. Click Create Instance and then wait until the instance initializes and starts.

gcloud

Create an instance with a public IP address

Before running the gcloud sql instances create command as follows, replace DB_ROOT_PASSWORD with the password of your database user.

Optionally, modify the values for the following parameters:

• --database_version: The database engine type and version. If left unspecified, the API default is used. See the gcloud database versions documentation to see the currently available versions.
• --cpu: The number of cores desired in the machine.
• --memory: Whole number value indicating how much memory is desired in the machine. A size unit should be provided (for example, 3072MB or 9GB). If no units are specified, GB is assumed.
• --region: Regional location of the instance (for example asia-east1, us-east1). If left unspecified, the default us-central is used. See the full list of regions.

Run the gcloud sql instances create command to create a Cloud SQL instance.

gcloud sql instances create quickstart-instance --database-version=SQLSERVER_2019_STANDARD --cpu=1 --memory=4GB --region=us-central --root-password=DB_ROOT_PASSWORD

Private IP

Console

Allocate an IP address range and create a private connection to configure private services access for Cloud SQL

1. In the Google Cloud console, go to the VPC networks page.

   Go to VPC networks

2. Select the default VPC network.
3. Select the Private service connection tab.
4. Select the Allocated IP ranges for services tab.
5. Click Allocate IP range.
6. For the Name of the allocated range, specify google-managed-services-default.
7. Select the Automatic option for IP range and specify the prefix length as 16.
8. Click Allocate to create the allocated range.
9. Select the Private connections to services tab for the default VPC network.
10. Click Create connection to create a private connection between your network and a service producer.
11. For the Assigned allocation, select google-managed-services-default.
12. Click Connect to create the connection.

Create an instance with private IP address and SSL enabled

1. In the Google Cloud console, go to the Cloud SQL Instances page.

   Go to Cloud SQL Instances

2. Click Create instance.
3. Click SQL Server.
4. Enter quickstart-instance for Instance ID.
5. Enter a password for the sqlserver user. Save this password for future use.
6. Click the Single zone option for Choose region and zonal availability.
7. Click and expand Show configuration options.
8. For Machine Type, select Lightweight.
9. In Connections, select Private IP.
10. Select default in the Network drop-down menu.
11. Clear the Public IP checkbox to create an instance only with a private IP.
12. Click Create instance and then wait for the instance to initialize and start.
13. Click Connections.
14. In the Security section, select Allow only SSL connections to enable SSL connections.
15. In the Allow only SSL connections dialog, click Save and restart and then wait for the instance to restart.

gcloud

Allocate an IP address range and create a private connection to configure private services access for Cloud SQL

1. Run the gcloud compute addresses create command to allocate an IP address range.

   gcloud compute addresses create google-managed-services-default --global --purpose=VPC_PEERING --prefix-length=16 --description="peering range for Google" --network=default

2. Run the gcloud services vpc-peerings connect command to create a private connection to the allocated IP address range. Replace YOUR_PROJECT_ID with your project's project ID.

   gcloud services vpc-peerings connect --service=servicenetworking.googleapis.com --ranges=google-managed-services-default --network=default --project=YOUR_PROJECT_ID

Create an instance with private IP address and SSL enabled

1. Before running the command as follows, replace DB_ROOT_PASSWORD with the password of your database user.

Optionally, modify the values for the following parameters:

• --database_version: The database engine type and version. If left unspecified, the API default is used. See the gcloud database versions documentation to see the currently available versions.
• --cpu: The number of cores in the machine.
• --memory: A whole number value indicating how much memory to include in the machine. A size unit can be provided (for example, 3072MB or 9GB). If no units are specified, GB is assumed.
• --region: The regional location of the instance (for example asia-east1, us-east1). If left unspecified, the default us-central1 is used. See the full list of regions.

Run the gcloud sql instances create command to create a Cloud SQL instance with a Private IP address.

gcloud beta sql instances create quickstart-instance --database-version=SQLSERVER_2017_STANDARD --cpu=1 --memory=4GB --region=us-central --root-password=DB_ROOT_PASSWORD --no-assign-ip --network=default

2. Run the gcloud sql instances patch command to enable only allow SSL connections for the instance.

gcloud sql instances patch quickstart-instance --require-ssl

Create a database

Console

1. In the Google Cloud console, go to the Cloud SQL Instances page.

   Go to Cloud SQL Instances

2. Select quickstart-instance.
3. Open the Databases tab.
4. Click Create database.
1. In the New database dialog, enter quickstart_db as the name of the database.
   
2. Click Create.

gcloud

Run the gcloud sql databases create command to create a database.

gcloud sql databases create quickstart_db --instance=quickstart-instance

Configure a Compute Engine service account

Create and configure a Google Cloud service account that has the Cloud SQL Client role with permissions to connect to Cloud SQL. After you create a service account, you might need to wait for 60 seconds or more before you use the service account.

Console

Create a service account

1. In the Google Cloud console, go to the Create service account page.

Go to Create service account

2. Select a Google Cloud project.
3. Enter a quickstart-service-account as the service account name.
4. Optional: Enter a description of the service account.
5. Click Create and continue and continue to the next step.
6. Choose the Cloud SQL Client role to grant to the service account on the project.
7. Click Add another role and choose the Storage Object Viewer role to grant to the service account on the project.
8. Click Continue.
9. Click Done to finish creating the service account.

gcloud

Create a service account

1. To create the service account, run the gcloud iam service-accounts create command:

gcloud iam service-accounts create quickstart-service-account --description="DESCRIPTION" --display-name="quickstart-service-account"

Replace the following value:

• DESCRIPTION: an optional description of the service account
2. To grant your service account the Cloud SQL Client role and the Storage Object Viewer role on your project, run the gcloud projects add-iam-policy-binding command. Replace PROJECT_ID with your Google Cloud project ID:

   gcloud projects add-iam-policy-binding PROJECT_ID --member="serviceAccount:quickstart-service-account@PROJECT_ID.iam.gserviceaccount.com" --role="roles/cloudsql.client" --role="roles/storage.objectViewer"

Create Compute Engine VM instance

Create a Compute Engine VM Instance to host a sample web app that connects to Cloud SQL.

Create a Linux VM Instance

Console

1. In the Google Cloud console, go to the VM instances page.

   Go to VM instances

2. Click the Create instance button.
3. For VM instance Name enter quickstart-vm-instance.
4. For Service accounts select quickstart-service-account.
5. For Firewall select the Allow HTTP traffic option.
6. Click Create to create the VM instance.

gcloud

Before running the following command, replace YOUR_PROJECT_ID with your project ID.

Run the following gcloud compute instances create command.

gcloud compute instances create quickstart-vm-instance --image-family=debian-10 --image-project=debian-cloud  --machine-type=e2-medium --service-account=quickstart-service-account@YOUR_PROJECT_ID.iam.gserviceaccount.com --scopes=https://www.googleapis.com/auth/cloud-platform --tags=http-server --zone=us-central1-a

Create a Windows VM Instance

Console

1. In the Google Cloud console, go to the VM instances page.

   Go to VM instances

2. Click the Create instance button.
3. For VM instance Name enter quickstart-vm-instance.
4. For Boot disc click the Change button.
1. For Operating system select Windows Server.
2. For Version select Windows Server 2022 Datacenter.
3. Click the Select button.
5. For Service accounts select quickstart-service-account.
6. For Firewall select the Allow HTTP traffic option.
7. Click Create to create the VM instance.
8. After 2-3 minutes once the VM instance has started, click the Set Windows Password button on the VM instance details page.
9. Copy and save this password in a secure location as you will be using it to access your VM instance in the next step of this quickstart.

gcloud

Before running the following command, replace YOUR_PROJECT_ID with your project ID.

Run the following gcloud compute instances create command in a Terminal Window.

gcloud compute instances create quickstart-vm-instance --image-project=windows-cloud --image-family=windows-2022 --machine-type=e2-medium --service-account=quickstart-service-account@YOUR_PROJECT_ID.iam.gserviceaccount.com --scopes=https://www.googleapis.com/auth/cloud-platform --tags=http-server --zone=us-central1-a

After 2-3 minutes once the VM instance has started, run the following command to set the Windows password on the VM instance.

gcloud compute reset-windows-password quickstart-vm-instance

Copy and save this password in a secure location as you will be using it to access your VM instance in the next step of this quickstart.

Access Compute Engine VM instance

Access Linux VM Instance

Console

In the Google Cloud console, go to the VM instances page.

Go to VM instances

In the list of virtual machine instances, click SSH in the row of the instance that you want to connect to.

Note: When you connect to VMs using the Google Cloud console, Compute Engine creates an ephemeral SSH key for you. For more information about SSH keys, see SSH connections to Linux VMs

gcloud

Use the gcloud compute ssh command to connect to a Linux VM instance. Replace YOUR_PROJECT_ID with your project ID:

gcloud compute ssh --project=YOUR_PROJECT_ID --zone=us-central1-a quickstart-vm-instance

Access Windows VM Instance

Chrome RDP plugin

Chrome RDP for Google Cloud is a third-party plugin that lets you connect to Windows instances by using the Chrome browser. The plugin is integrated with the Google Cloud console. After you install the plugin, connect to any Windows Server instance by using the RDP button in the Google Cloud console .

To connect using the Chrome RDP plugin, do the following:

1. Install the Chrome RDP for Google Cloud extension.
2. In Google Cloud console, go to the VM instances page and find the Windows instance you want to connect to.

Go to the VM instances page

3. Click the RDP button for the instance you want to connect to. The Chrome RDP extension opens.
4. Since your VM instance does not have a domain configured, you can leave the Domain field blank
5. Enter your username, and password, and click OK to connect.

6. If prompted, press Continue to accept the certificate.

Other

See Connect to Windows VMs using RDP for more options for accessing a Compute Engine Windows VM instance.

Setup development environment for programming language

Set up the Compute Engine VM instance's development environment for your preferred programming language.

Setup Linux VM Instance development environment

Go

Complete the following steps to set up the Compute Engine VM instance's development environment to run the Go sample app.

1. Go to the setup guide for a Go development environment.
2. Complete the instructions in the Install Go section.

Java

Complete the following steps to set up the Compute Engine VM instance's development environment to run the Java sample app.

1. Go to the setup guide for a Java development environment.
2. Complete the instructions in the Install a JDK (Java Development Kit) section.
3. Complete the instructions in the Install a build automation tool to set up Apache Maven.

Node.js

Complete the following steps to set up the Compute Engine VM instance's development environment to run the Node.js sample app.

1. Go to setup guide for a Node.js development environment.
2. Complete the instructions in the Installing Node.js and npm section.

Python

Complete the following steps to set up the Compute Engine VM instance's development environment to run the Python sample app.

1. Go to setup guide for a Python development environment.
2. Complete the instructions in the Installing Python section.

Setup Windows VM Instance development environment

Go

Complete the following steps to set up the Compute Engine VM instance's development environment to run the Go sample app.

1. Go to the setup guide for a Go development environment.
2. Complete the instructions in the Install Go section.

Java

Complete the following steps to set up the Compute Engine VM instance's development environment to run the Java sample app.

1. Go to the setup guide for a Java development environment.
2. Complete the instructions in the Install a JDK (Java Development Kit) section.
3. Complete the instructions in the Install a build automation tool section to set up Apache Maven.

Node.js

Complete the following steps to set up the Compute Engine VM instance's development environment to run the Node.js sample app.

1. Go to setup guide for a Node.js development environment.
2. Complete the instructions in the Installing Node.js and npm section.

Python

Complete the following steps to set up the Compute Engine VM instance's development environment to run the Python sample app.

1. Install Python and the PIP package manager for Python.
1. Go to setup guide for a Python development environment.
2. Complete the instructions in the Installing Python section.
1. The instructions above will have you visit the Python Releases for Windows download page. From that page click the Latest Python 3 Release link.
2. On the Python 3.X.X page, click the Windows Installer 64-bit link to download the installer file to your Windows Compute Engine VM instance.
3. Once you've downloaded the Python installer to the VM instance, open the folder containing the downloaded file. Then right click on the installer file and select Run as administrator.
4. In the Install Python dialog that appears, select the option to Add Python 3.X.X to PATH and click → Install Now.
2. Use PIP to install virtualenv.
1. Open Powershell on the Windows Compute Engine VM instance and run the following pip install command.

pip install virtualenv

Install Git

Install Git, an open source version control system on to your Compute Engine VM instance.

Compute Engine Linux VM instance

On your Compute Engine Linux VM instance, follow the official Git installation documentation for Linux.

• Run the suggested Debian/Ubuntu install git command using the sudo command prefix to run the command as an administrator. The full installation command to run in the terminal should be formatted as follows:

sudo apt-get install git

Compute Engine Windows VM instance

On your Compute Engine Windows VM instance, follow the official Git installation documentation for Windows to download the 64-bit Standalone Installer and run it to install Git.

Clone sample app

Clone a sample app to your Compute Engine VM instance using the git clone command.

Go

On your Compute Engine VM instance, open a new terminal or Powershell window. Run the following commands to clone the Go sample app and change the directory to the directory containing the sample app.

1. Clone the sample app.

   git clone https://github.com/GoogleCloudPlatform/golang-samples

2. Change directory to the directory containing the sample app.

   cd golang-samples/cloudsql/sqlserver/database-sql

Java

On your Compute Engine VM instance, open a new terminal or Powershell window. Run the following commands to clone the Java sample app and change the directory to the directory containing the sample app.

1. Clone the sample app.

   git clone https://github.com/GoogleCloudPlatform/java-docs-samples

2. Change directory to the directory containing the sample app.

   cd java-docs-samples/cloud-sql/sqlserver/servlet

Node.js

On your Compute Engine VM instance, open a new terminal or Powershell window. Run the following commands to clone the Node.js sample app and change the directory to the directory containing the sample app.

1. Clone the sample app.

   git clone https://github.com/GoogleCloudPlatform/nodejs-docs-samples

2. Change directory to the directory containing the sample app.

   cd nodejs-docs-samples/cloud-sql/sqlserver/mssql

Python

On your Compute Engine VM instance, open a new terminal or Powershell window. Run the following commands to clone the Python sample app and change the directory to the directory containing the sample app.

1. Clone the sample app.

   git clone https://github.com/GoogleCloudPlatform/python-docs-samples

2. Change directory to the directory containing the sample app.

   cd python-docs-samples/cloud-sql/sql-server/sqlalchemy

Configure and run a Cloud SQL sample app

With a Cloud SQL instance, database, and service account with client permissions, you can now configure a sample application running on your Compute Engine VM instance to connect to your Cloud SQL instance.

Public IP Cloud SQL Instance and Linux based Compute Engine VM

Go

On the Compute Engine VM instance in the open terminal, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacements:

• INSTANCE_CONNECTION_NAME with your instance's Connection name that appears on the Cloud SQL instances page in the Google Cloud console.
• YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

export INSTANCE_CONNECTION_NAME='INSTANCE_CONNECTION_NAME'
export DB_PORT='1433'
export DB_NAME='quickstart_db'
export DB_USER='sqlserver'
export DB_PASS='YOUR_DB_PASSWORD'

On the Compute Engine VM instance in the open terminal, run the following commands to get the Go sample app's dependencies on to your Compute Engine VM instance and run the sample app.

1. Get the dependencies required to run to sample app.

   go get ./...

2. Run the sample app.

   go run cmd/app/main.go

On your local computer get the Compute Engine VM instance's external IP address where the sample app is running and view it in a browser.

Note: This quickstart step requires the gcloud CLI, which provides command-line access to your Google Cloud resources using gcloud CLI commands. If you don't have the gcloud CLI installed on your local computer, then install the gcloud CLI to proceed.

1. In a terminal or in Powershell on your local computer, get the Compute Engine VM instance's external IP address by running the following gcloud compute instances describe command:

gcloud compute instances describe quickstart-vm-instance --format="value(networkInterfaces[0].accessConfigs[].natIP)"

2. View the running sample app. Open a browser on your local computer and go to the Compute Engine VM instance's external IP address and port :8080.

   http://COMPUTE_ENGINE_VM_EXTERNAL_IP_ADDRESS:8080

   

To stop the sample app, press Control+C in the Compute Engine VM instance terminal where you started the sample app.

Java

On the Compute Engine VM instance in the open terminal, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacements:

• INSTANCE_CONNECTION_NAME with your instance's Connection name that appears on the Cloud SQL instances page in the Google Cloud console.
• YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

export INSTANCE_CONNECTION_NAME='INSTANCE_CONNECTION_NAME'
export DB_PORT='1433'
export DB_NAME='quickstart_db'
export DB_USER='sqlserver'
export DB_PASS='YOUR_DB_PASSWORD'

On the Compute Engine VM instance in the open terminal, run the following command to get the Java sample app's dependencies on to your Compute Engine VM instance and run the sample app.

mvn jetty:run

On your local computer get the Compute Engine VM instance's external IP address where the sample app is running and view it in a browser.

Note: This quickstart step requires the gcloud CLI, which provides command-line access to your Google Cloud resources using gcloud CLI commands. If you don't have the gcloud CLI installed on your local computer, then install the gcloud CLI to proceed.

1. In a terminal or in Powershell on your local computer, get the Compute Engine VM instance's external IP address by running the following gcloud compute instances describe command:

gcloud compute instances describe quickstart-vm-instance --format="value(networkInterfaces[0].accessConfigs[].natIP)"

2. View the running sample app. Open a browser on your local computer and go to the Compute Engine VM instance's external IP address and port :8080.

   http://COMPUTE_ENGINE_VM_EXTERNAL_IP_ADDRESS:8080

   

To stop the sample app, press Control+C in the Compute Engine VM instance terminal where you started the sample app.

Node.js

1. On the Compute Engine VM instance in the open terminal, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacement:

   • YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

   export INSTANCE_HOST='127.0.0.1'
   export DB_PORT='1433'
   export DB_NAME='quickstart_db'
   export DB_USER='sqlserver'
   export DB_PASS='YOUR_DB_PASSWORD'

2. Download the Cloud SQL Auth Proxy.

   curl -o cloud-sql-proxy \
   https://storage.googleapis.com/cloud-sql-connectors/cloud-sql-proxy/v2.0.0/cloud-sql-proxy.linux.amd64

3. Set permissions to make the Cloud SQL Auth Proxy file executable.

   chmod +x cloud-sql-proxy

4. Run the Cloud SQL Auth Proxy as a background process. Replace INSTANCE_CONNECTION_NAME with your instance's Connection name that appears on the Cloud SQL instances page in the Google Cloud console.

   ./cloud-sql-proxy INSTANCE_CONNECTION_NAME &

Note: The process running the Cloud SQL Auth Proxy in the background can be stopped using the fg command in your Terminal window where you started the sample app. This should bring the running Cloud SQL Auth Proxy job to the terminal foreground. Then press the Ctrl + C keys to stop the proxy job.

On the Compute Engine VM instance in the open terminal, run the following commands to get the required Node.js packages on to your Compute Engine VM instance and run the sample app.

1. Install the Node.js packages necessary to run the app locally.

   npm install

2. Run the sample app.

   npm start

On your local computer get the Compute Engine VM instance's external IP address where the sample app is running and view it in a browser.

Note: This quickstart step requires the gcloud CLI, which provides command-line access to your Google Cloud resources using gcloud CLI commands. If you don't have the gcloud CLI installed on your local computer, then install the gcloud CLI to proceed.

1. In a terminal or in Powershell on your local computer, get the Compute Engine VM instance's external IP address by running the following gcloud compute instances describe command:

gcloud compute instances describe quickstart-vm-instance --format="value(networkInterfaces[0].accessConfigs[].natIP)"

2. View the running sample app. Open a browser on your local computer and go to the Compute Engine VM instance's external IP address and port :8080.

   http://COMPUTE_ENGINE_VM_EXTERNAL_IP_ADDRESS:8080

   

To stop the sample app, press Control+C in the Compute Engine VM instance terminal where you started the sample app.

Python

On the Compute Engine VM instance in the open terminal, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacements:

• INSTANCE_CONNECTION_NAME with your instance's Connection name that appears on the Cloud SQL instances page in the Google Cloud console.
• YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

export INSTANCE_CONNECTION_NAME='INSTANCE_CONNECTION_NAME'
export DB_PORT='1433'
export DB_NAME='quickstart_db'
export DB_USER='sqlserver'
export DB_PASS='YOUR_DB_PASSWORD'

On the Compute Engine VM instance in the open terminal, run the following commands to get the Python sample app's requirements on to your Compute Engine VM instance and run the sample app.

1. Initialize a virtual environment and install the requirements to run to sample app.

   python3 -m venv env
   source env/bin/activate
   pip install -r requirements.txt

2. Run the sample app.

   python app.py

On your local computer, set up port forwarding over SSH by performing the instructions in next quickstart step. This enables you to use a browser on your local computer to view the app running on your Compute Engine VM instance.

Note: This quickstart step requires the gcloud CLI, which provides command-line access to your Google Cloud resources using gcloud CLI commands. If you don't have the gcloud CLI installed on your local computer, then install the gcloud CLI to proceed.

1. In a terminal or in Powershell on your local computer, run the following gcloud compute ssh command to setup port forwarding over SSH. Before running the command, replace YOUR_PROJECT_ID with your project ID.

gcloud compute ssh quickstart-vm-instance --project=YOUR_PROJECT_ID --zone=us-central1-a --ssh-flag='-L 8000:127.0.0.1:8080'

2. View the running sample app. With port forwarding actively running, open a browser on your local computer and enter http://127.0.0.1:8000 in the address bar of your browser..

   

To stop the sample app, press Control+C in the Compute Engine VM instance terminal where you started the sample app.

Public IP Cloud SQL Instance and Windows based Compute Engine VM

Go

On the Compute Engine VM instance in the open Powershell window, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacements:

• INSTANCE_CONNECTION_NAME with your instance's Connection name that appears on the Cloud SQL instances page in the Google Cloud console.
• YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

$env:INSTANCE_CONNECTION_NAME="INSTANCE_CONNECTION_NAME"
$env:DB_PORT="1433"
$env:DB_NAME="quickstart_db"
$env:DB_USER="sqlserver"
$env:DB_PASS="YOUR_DB_PASSWORD"

On the Compute Engine VM instance in the open Powershell window, run the following commands to get the Go sample app's dependencies on to your Compute Engine VM instance and run the sample app.

1. Get the dependencies required to run to sample app.

   go get ./...

2. Run the sample app.

   go run cmd\app\main.go

3. View the running sample app. Open a browser on the Compute Engine VM instance and go to http://127.0.0.1:8080.

   

To stop the sample app, press Control+C in the Compute Engine VM instance Powershell window where you started the sample app.

Java

On the Compute Engine VM instance in the open Powershell window, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacements:

• INSTANCE_CONNECTION_NAME with your instance's Connection name that appears on the Cloud SQL instances page in the Google Cloud console.
• YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

$env:INSTANCE_CONNECTION_NAME="INSTANCE_CONNECTION_NAME"
$env:DB_PORT="1433"
$env:DB_NAME="quickstart_db"
$env:DB_USER="sqlserver"
$env:DB_PASS="YOUR_DB_PASSWORD"

1. On the Compute Engine VM instance in the open Powershell window, run the following command to get the Java sample app's dependencies on to your Compute Engine VM instance and run the sample app.

   mvn jetty:run

2. View the running sample app. Open a browser on the Compute Engine VM instance and go to http://127.0.0.1:8080.

   

To stop the sample app, press Control+C in the Compute Engine VM instance Powershell window where you started the sample app.

Node.js

1. On the Compute Engine VM instance in the open Powershell window, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacement:

   • YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

   $env:INSTANCE_HOST="127.0.0.1"
   $env:DB_PORT="1433"
   $env:DB_NAME="quickstart_db"
   $env:DB_USER="sqlserver"
   $env:DB_PASS="YOUR_DB_PASSWORD"

2. Download the Cloud SQL Auth Proxy.

   wget https://storage.googleapis.com/cloud-sql-connectors/cloud-sql-proxy/v2.0.0/cloud-sql-proxy.x64.exe `
   -O cloud-sql-proxy.exe

3. Run the Cloud SQL Auth Proxy as a background process. Replace INSTANCE_CONNECTION_NAME with your instance's Connection name that appears on the Cloud SQL instances page in the Google Cloud console.

   Start-Process -filepath  ".\cloud-sql-proxy.exe" -ArgumentList `
   "INSTANCE_CONNECTION_NAME"

Note: The process running the Cloud SQL Auth Proxy in the background can be stopped by selecting the cmd.exe window that was spawned by the Start-Process command. Then close the window to stop the proxy job.

On the Compute Engine VM instance in the open Powershell window, run the following commands to get the required Node.js packages on to your Compute Engine VM instance and run the sample app.

1. Install the Node.js packages necessary to run the app locally.

   npm install

2. Run the sample app.

   npm start

3. View the running sample app. Open a browser on the Compute Engine VM instance and go to http://127.0.0.1:8080.

   

To stop the sample app, press Control+C in the Compute Engine VM instance Powershell window where you started the sample app.

Python

On the Compute Engine VM instance in the open Powershell window, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacements:

• INSTANCE_CONNECTION_NAME with your instance's Connection name that appears on the Cloud SQL instances page in the Google Cloud console.
• YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

$env:INSTANCE_CONNECTION_NAME="INSTANCE_CONNECTION_NAME"
$env:DB_PORT="1433"
$env:DB_NAME="quickstart_db"
$env:DB_USER="sqlserver"
$env:DB_PASS="YOUR_DB_PASSWORD"

On the Compute Engine VM instance in the open Powershell window, run the following commands to get the Python sample app's requirements on to your Compute Engine VM instance and run the sample app.

1. Initialize a virtual environment and install the requirements to run to sample app.

   virtualenv --python python3 env
   .\env\Scripts\activate
   pip install -r requirements.txt

2. Run the sample app.

   python app.py

3. View the running sample app. Open a browser on the Compute Engine VM instance and go to http://127.0.0.1:8080.

   

To stop the sample app, press Control+C in the Compute Engine VM instance Powershell window where you started the sample app.

Private IP Cloud SQL Instance and Linux based Compute Engine VM

Create and download SSL server certificate on to your local computer

1. In the Google Cloud console, go to the Cloud SQL Instances page.

   Go to Cloud SQL Instances

2. Click the quickstart-instance to see its Overview page.
3. Click the Connections tab.
4. In the Security section, click Download certificates to download the SSL server certificate.

Upload SSL certificate to Cloud Storage bucket

Console

In a browser on your local computer, create a Cloud Storage bucket and upload the SSL certificate to the bucket where it can then be accessed from the Compute Engine VM instance.

1. Create a Cloud Storage bucket.
1. For Name of your bucket, enter the following name. Replace YOUR_PROJECT_ID with your project ID:

   YOUR_PROJECT_ID-quickstart-certs

2. Click the Create button to create the bucket.
2. Click the Upload Files button to upload files to the newly created Cloud Storage bucket.
3. Select the following file to be uploaded from your local computer to Cloud Storage:
• server-ca.pem

gcloud

On your local computer in a terminal or Powershell window open to the directory where you downloaded the SSL certificate, you can now create a Cloud Storage bucket and upload the SSL certificate to bucket where it can then be accessed from the Compute Engine VM instance. The gcloud CLI will be used to upload the file.

1. Run the following gcloud storage buckts create command to make a new Cloud Storage bucket:

gcloud storage buckets create gs://YOUR_PROJECT_ID-quickstart-certs --location=us-central1

2. From the directory where you downloaded the certificate on your local computer, run the following gcloud storage cp command to copy the SSL certificates to the newly created Cloud Storage bucket:

gcloud storage cp server-ca.pem gs://YOUR_PROJECT_ID-quickstart-certs/

Go

Download SSL certificate using the gcloud CLI on the Compute Engine VM instance

On the Compute Engine VM instance in a terminal open to the golang-samples/cloudsql/sqlserver/database-sql directory, run the following gcloud storage cp command to download the SSL certificates from Cloud Storage to the certs directory.

gcloud storage cp gs://YOUR_PROJECT_ID-quickstart-certs/server-ca.pem certs/.

Set Environment Variables on the Compute Engine VM instance

On the Compute Engine VM instance in the open terminal, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacements:

• INSTANCE_HOST set to the Private IP address of your instance displayed on the Cloud SQL instances page in the Google Cloud console.
Note: Connections to a Cloud SQL instance using a private IP address are automatically authorized for RFC 1918 address ranges. For Non-RFC 1918 address ranges, see Learn about using private IP.
• YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

export INSTANCE_HOST='INSTANCE_HOST'
export DB_PORT='1433'
export DB_NAME='quickstart_db'
export DB_USER='sqlserver'
export DB_PASS='YOUR_DB_PASSWORD'
export DB_ROOT_CERT='certs/server-ca.pem'
export PRIVATE_IP='TRUE'

On the Compute Engine VM instance in the open terminal, run the following commands to get the Go sample app's dependencies on to your Compute Engine VM instance and run the sample app.

1. Get the dependencies required to run to sample app.

   go get ./...

2. Run the sample app.

   go run cmd/app/main.go

On your local computer get the Compute Engine VM instance's external IP address where the sample app is running and view it in a browser.

Note: This quickstart step requires the gcloud CLI, which provides command-line access to your Google Cloud resources using gcloud CLI commands. If you don't have the gcloud CLI installed on your local computer, then install the gcloud CLI to proceed.

1. In a terminal or in Powershell on your local computer, get the Compute Engine VM instance's external IP address by running the following gcloud compute instances describe command:

gcloud compute instances describe quickstart-vm-instance --format="value(networkInterfaces[0].accessConfigs[].natIP)"

2. View the running sample app. Open a browser on your local computer and go to the Compute Engine VM instance's external IP address and port :8080.

   http://COMPUTE_ENGINE_VM_EXTERNAL_IP_ADDRESS:8080

   

To stop the sample app, press Control+C in the Compute Engine VM instance terminal where you started the sample app.

Java

Download SSL certificate using the gcloud CLI on the Compute Engine VM instance

On the Compute Engine VM instance in a terminal open to the java-docs-samples/cloud-sql/sqlserver/servlet/ directory, run the following gcloud storage cp command to download the SSL certificates from Cloud Storage to the current directory.

gcloud storage cp gs://YOUR_PROJECT_ID-quickstart-certs/server-ca.pem .

Configure the SSL certificates for use in Java on the Compute Engine VM instance

In the terminal on the Compute Engine VM instance, run the following command to import the server certificate into a custom Java truststore using keytool. Before running the following command, replace TRUST_CERT_KEYSTORE_PASSWD with your own custom keystore password to be used to create the Java truststore.

keytool -importcert -alias MySQLCACert -file server-ca.pem \
-keystore quickstart-truststore -storepass TRUST_CERT_KEYSTORE_PASSWD

Set Environment Variables on the Compute Engine VM instance

On the Compute Engine VM instance in the open terminal, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacements:

• INSTANCE_HOST set to the Private IP address of your instance displayed on the Cloud SQL instances page in the Google Cloud console.
Note: Connections to a Cloud SQL instance using a private IP address are automatically authorized for RFC 1918 address ranges. For Non-RFC 1918 address ranges, see Learn about using private IP.
• YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

export INSTANCE_HOST='INSTANCE_HOST'
export DB_PORT='1433'
export DB_NAME='quickstart_db'
export DB_USER='sqlserver'
export DB_PASS='YOUR_DB_PASSWORD'
export TRUST_CERT_KEYSTORE_PATH='quickstart-truststore'
export TRUST_CERT_KEYSTORE_PASSWD='TRUST_CERT_KEYSTORE_PASSWD'
export PRIVATE_IP='TRUE'

On the Compute Engine VM instance in the open terminal, run the following command to get the Java sample app's dependencies on to your Compute Engine VM instance and run the sample app.

mvn jetty:run

On your local computer get the Compute Engine VM instance's external IP address where the sample app is running and view it in a browser.

Note: This quickstart step requires the gcloud CLI, which provides command-line access to your Google Cloud resources using gcloud CLI commands. If you don't have the gcloud CLI installed on your local computer, then install the gcloud CLI to proceed.

1. In a terminal or in Powershell on your local computer, get the Compute Engine VM instance's external IP address by running the following gcloud compute instances describe command:

gcloud compute instances describe quickstart-vm-instance --format="value(networkInterfaces[0].accessConfigs[].natIP)"

2. View the running sample app. Open a browser on your local computer and go to the Compute Engine VM instance's external IP address and port :8080.

   http://COMPUTE_ENGINE_VM_EXTERNAL_IP_ADDRESS:8080

   

To stop the sample app, press Control+C in the Compute Engine VM instance terminal where you started the sample app.

Python

Download SSL certificate using the gcloud CLI on the Compute Engine VM instance

On the Compute Engine VM instance in a terminal open to the python-docs-samples/cloud-sql/sql-server/sqlalchemy directory, run the following gcloud storage cp command to download the SSL certificates from Cloud Storage to the certs directory.

gcloud storage cp gs://YOUR_PROJECT_ID-quickstart-certs/server-ca.pem certs/.

Set Environment Variables on the Compute Engine VM instance

On the Compute Engine VM instance in the open terminal, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacements:

• INSTANCE_HOST set to the Private IP address of your instance displayed on the Cloud SQL instances page in the Google Cloud console.
Note: Connections to a Cloud SQL instance using a private IP address are automatically authorized for RFC 1918 address ranges. For Non-RFC 1918 address ranges, see Learn about using private IP.
• YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

export INSTANCE_HOST='INSTANCE_HOST'
export DB_PORT='1433'
export DB_NAME='quickstart_db'
export DB_USER='sqlserver'
export DB_PASS='YOUR_DB_PASSWORD'
export DB_ROOT_CERT='certs/server-ca.pem'
export PRIVATE_IP='TRUE'

On the Compute Engine VM instance in the open terminal, run the following commands to get the Python sample app's requirements on to your Compute Engine VM instance and run the sample app.

1. Initialize a virtual environment and install the requirements to run to sample app.

   python3 -m venv env
   source env/bin/activate
   pip install -r requirements.txt

2. Run the sample app.

   python app.py

On your local computer, set up port forwarding over SSH by performing the instructions in next quickstart step. This enables you to use a browser on your local computer to view the app running on your Compute Engine VM instance.

Note: This quickstart step requires the gcloud CLI, which provides command-line access to your Google Cloud resources using gcloud CLI commands. If you don't have the gcloud CLI installed on your local computer, then install the gcloud CLI to proceed.

1. In a terminal or in Powershell on your local computer, run the following gcloud compute ssh command to setup port forwarding over SSH. Before running the command, replace YOUR_PROJECT_ID with your project ID.

gcloud compute ssh quickstart-vm-instance --project=YOUR_PROJECT_ID --zone=us-central1-a --ssh-flag='-L 8000:127.0.0.1:8080'

2. View the running sample app. With port forwarding actively running, open a browser on your local computer and enter http://127.0.0.1:8000 in the address bar of your browser..

   

To stop the sample app, press Control+C in the Compute Engine VM instance terminal where you started the sample app.

Private IP Cloud SQL Instance and Windows based Compute Engine VM

Create and download SSL server certificate on to your local computer

1. In the Google Cloud console, go to the Cloud SQL Instances page.

   Go to Cloud SQL Instances

2. Click the quickstart-instance to see its Overview page.
3. Click the Connections tab.
4. In the Security section, click Download certificates to download the SSL server certificate.

Upload SSL certificate to Cloud Storage bucket

Console

In a browser on your local computer, create a Cloud Storage bucket and upload the SSL certificate to the bucket where it can then be accessed from the Compute Engine VM instance.

1. Create a Cloud Storage bucket.
1. For Name of your bucket, enter the following name. Replace YOUR_PROJECT_ID with your project ID:

   YOUR_PROJECT_ID-quickstart-certs

2. Click the Create button to create the bucket.
2. Click the Upload Files button to upload files to the newly created Cloud Storage bucket.
3. Select the following file to be uploaded from your local computer to Cloud Storage:
• server-ca.pem

gcloud

On your local computer in a terminal or Powershell window open to the directory where you downloaded the SSL certificate, you can now create a Cloud Storage bucket and upload the SSL certificate to bucket where it can then be accessed from the Compute Engine VM instance. The gcloud CLI will be used to upload the file.

1. Run the following gcloud storage buckts create command to make a new Cloud Storage bucket:

gcloud storage buckets create gs://YOUR_PROJECT_ID-quickstart-certs --location=us-central1

2. From the directory where you downloaded the certificate on your local computer, run the following gcloud storage cp command to copy the SSL certificates to the newly created Cloud Storage bucket:

gcloud storage cp server-ca.pem gs://YOUR_PROJECT_ID-quickstart-certs/

Go

Download SSL certificate using the gcloud CLI on the Compute Engine VM instance

On the Compute Engine VM instance in a Powershell window open to the golang-samples/cloudsql/sqlserver/database-sql directory, run the following gcloud storage cp command to download the SSL certificate from Cloud Storage to the certs directory.

gcloud storage cp gs://YOUR_PROJECT_ID-quickstart-certs/server-ca.pem certs/.

Set Environment Variables on the Compute Engine VM instance

On the Compute Engine VM instance in the Powershell window, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacements:

• INSTANCE_HOST set to the Private IP address of your instance displayed on the Cloud SQL instances page in the Google Cloud console.
Note: Connections to a Cloud SQL instance using a private IP address are automatically authorized for RFC 1918 address ranges. For Non-RFC 1918 address ranges, see Learn about using private IP.
• YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

$env:INSTANCE_HOST="INSTANCE_HOST"
$env:DB_PORT="1433"
$env:DB_NAME="quickstart_db"
$env:DB_USER="sqlserver"
$env:DB_PASS="YOUR_DB_PASSWORD"
$env:DB_ROOT_CERT="certs/server-ca.pem"
$env:PRIVATE_IP="TRUE"

On the Compute Engine VM instance in the open Powershell window, run the following commands to get the Go sample app's dependencies on to your Compute Engine VM instance and run the sample app.

1. Get the dependencies required to run to sample app.

   go get ./...

2. Run the sample app.

   go run cmd\app\main.go

3. View the running sample app. Open a browser on the Compute Engine VM instance and go to http://127.0.0.1:8080.

   

To stop the sample app, press Control+C in the Compute Engine VM instance Powershell window where you started the sample app.

Java

Download SSL certificate using the gcloud CLI on the Compute Engine VM instance

On the Compute Engine VM instance in a Powershell window open to the java-docs-samples/cloud-sql/sqlserver/servlet/ directory, run the following gcloud storage cp command to download the SSL certificate from Cloud Storage to the current directory.

gcloud storage cp gs://YOUR_PROJECT_ID-quickstart-certs/server-ca.pem .

Configure the SSL certificates for use in Java on the Compute Engine VM instance

In the terminal on the Compute Engine VM instance, run the following command to import the server certificate into a custom Java truststore using keytool. Before running the following command, replace TRUST_CERT_KEYSTORE_PASSWD with your own custom keystore password to be used to create the Java truststore.

keytool -importcert -alias SQLServerCACert -file server-ca.pem `
-keystore quickstart-truststore -storepass TRUST_CERT_KEYSTORE_PASSWD

Set Environment Variables on the Compute Engine VM instance

On the Compute Engine VM instance in the Powershell window, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacements:

• INSTANCE_HOST set to the Private IP address of your instance displayed on the Cloud SQL instances page in the Google Cloud console.
Note: Connections to a Cloud SQL instance using a private IP address are automatically authorized for RFC 1918 address ranges. For Non-RFC 1918 address ranges, see Learn about using private IP.
• YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.
• TRUST_CERT_KEYSTORE_PASSWD with the password you specified for --storepass in the previous step.

$env:INSTANCE_HOST="INSTANCE_HOST"
$env:DB_PORT="1433"
$env:DB_NAME="quickstart_db"
$env:DB_USER="sqlserver"
$env:DB_PASS="YOUR_DB_PASSWORD"
$env:TRUST_CERT_KEYSTORE_PATH="quickstart-truststore"
$env:TRUST_CERT_KEYSTORE_PASSWD="TRUST_CERT_KEYSTORE_PASSWD"
$env:PRIVATE_IP="TRUE"

1. On the Compute Engine VM instance in the open Powershell window, run the following command to get the Java sample app's dependencies on to your Compute Engine VM instance and run the sample app.

   mvn jetty:run

2. View the running sample app. Open a browser on the Compute Engine VM instance and go to http://127.0.0.1:8080.

   

To stop the sample app, press Control+C in the Compute Engine VM instance Powershell window where you started the sample app.

Python

Download SSL certificate using the gcloud CLI on the Compute Engine VM instance

On the Compute Engine VM instance in a Powershell window open to the python-docs-samples/cloud-sql/sql-server/sqlalchemy directory, run the following gcloud storage cp command to download the SSL certificate from Cloud Storage to the certs directory.

gcloud storage cp gs://YOUR_PROJECT_ID-quickstart-certs/server-ca.pem certs/.

Set Environment Variables on the Compute Engine VM instance

On the Compute Engine VM instance in the Powershell window, run the following commands to initialize environment variables required to run the sample app. Before running the commands, make the following replacements:

• INSTANCE_HOST set to the Private IP address of your instance displayed on the Cloud SQL instances page in the Google Cloud console.
Note: Connections to a Cloud SQL instance using a private IP address are automatically authorized for RFC 1918 address ranges. For Non-RFC 1918 address ranges, see Learn about using private IP.
• YOUR_DB_PASSWORD with the password of the quickstart-user that you created in the previous Create a user quickstart step.

$env:INSTANCE_HOST="INSTANCE_HOST"
$env:DB_PORT="1433"
$env:DB_NAME="quickstart_db"
$env:DB_USER="sqlserver"
$env:DB_PASS="YOUR_DB_PASSWORD"
$env:DB_ROOT_CERT="certs/server-ca.pem"
$env:PRIVATE_IP="TRUE"

On the Compute Engine VM instance in the open Powershell window, run the following commands to get the Python sample app's requirements on to your Compute Engine VM instance and run the sample app.

1. Initialize a virtual environment and install the requirements to run to sample app.

   virtualenv --python python3 env
   .\env\Scripts\activate
   pip install -r requirements.txt

2. Run the sample app.

   python app.py

3. View the running sample app. Open a browser on the Compute Engine VM instance and go to http://127.0.0.1:8080.

   

To stop the sample app, press Control+C in the Compute Engine VM instance Powershell window where you started the sample app.

Clean up

To avoid incurring charges to your Google Cloud account for the resources used on this page, follow these steps.

Delete Cloud SQL instance

1. In the Google Cloud console, go to the Cloud SQL Instances page.

   Go to Cloud SQL Instances

2. Select the quickstart-instance instance to open the Instance details page.
3. In the icon bar at the top of the page, click Delete.
4. In the Delete instance dialog box, type quickstart-instance, and then click Delete to delete the instance.

Delete Compute Engine VM instance

1. In the Google Cloud console, go to the VM instances page.

   Go to VM instances

2. Select the quickstart-vm-instance instance to open the Instance details page.
3. In the icon bar at the top of the page, click Delete.
4. Click Delete to delete the instance.

Optional cleanup steps

If you're not using the Cloud SQL client role that you assigned to the Compute Engine default service account, you can remove it.

1. In the Google Cloud console, go to the IAM page.

   Go to IAM

2. Click the edit icon (which looks like a pencil) for the IAM account named Compute Engine default service account.
3. Delete the Cloud SQL client role.
4. Click Save.

If you're not using the API that was enabled as part of this quickstart, you can disable it.

• API that was enabled within this quickstart:
  • Cloud SQL Admin API

1. In the Google Cloud console, go to the APIs page.

   Go to APIs

2. Select any API that you would like to disable and then click the Disable API button.

What's next

Based on your needs, you can learn more about creating Cloud SQL instances.

You also can learn about creating SQL Server users and databases for your Cloud SQL instance.

For more information about pricing, see Cloud SQL for SQL Server pricing.

Learn more about:

• Configuring your Cloud SQL instance with a public IP address.
• Configuring your Cloud SQL instance with a private IP address.

Additionally, you can learn about connecting to a Cloud SQL instance from other Google Cloud applications:

• From an application running on App Engine standard environment
• From an application running on Compute Engine
• From an application running on GKE
• From Cloud Run functions
• From Cloud Run