Amazon Athena

Looker supports connections to Amazon Athena, an interactive query service that makes it easy to analyze data in Amazon S3 using standard SQL. Amazon Athena is serverless, so there is no infrastructure to manage. You are charged only for the queries that are run.

Encrypting network traffic

It is a best practice to encrypt network traffic between the Looker application and your database. Consider one of the options described on the Enabling secure database access documentation page.

Configuring an Amazon Athena connection

This page describes how to connect Looker to an Amazon Athena instance.

  1. Ensure that you have the following:

    • A pair of Amazon AWS access keys.

    • The S3 bucket containing the data you want to query in Looker with Amazon Athena. The Amazon AWS access keys must have read-write access to this bucket.

      Amazon Athena must have access to this S3 bucket by either a role or a permission set, as well as by firewall rules. Do not add security rules to the S3 bucket for Looker's IP, since this can inadvertently block Amazon Athena's access to the S3 bucket. (For other dialects besides Amazon Athena, users may want to limit access to the data from the network layer with an IP allowlist, as described on the Enabling secure database access documentation page.)

    • Knowledge of where your Amazon Athena instance data is located. The region name can be found in the upper right-hand portion of the Amazon Console.

  2. In the Admin section of Looker, select Connections, and then click Add Connection.

  3. Fill out the connection details:

    • Name: Specify the name of the connection. This is how you will refer to the connection in LookML projects.
    • Dialect: Select Amazon Athena.
    • Host and Port: Specify the name of the host and port as described in the Athena documentation on the JDBC URL format. The host should be a valid Amazon endpoint (like athena.eu-west-1.amazonaws.com), and the port should stay at 443. An up-to-date list of endpoints that support Athena can be found on this AWS General Reference page.
    • Database: Specify the default database that you would like modeled. Other databases can be accessed, but Looker treats this database as the default database.
    • Username: Specify the AWS access key ID.
    • Password: Specify the AWS secret access key.
    • Enable PDTs: Use this toggle to enable persistent derived tables (PDTs). Enabling PDTs reveals additional PDT fields and the PDT Overrides section for the connection.
    • Temp Database: Specify the name of the output directory in your S3 bucket where you want Looker to write your PDTs. The full path to your output directory must be specified in the Additional JDBC parameters field; see the Specifying your S3 bucket for query results output and PDTs section on this page.
    • Max number of PDT builder connections: Specify the number of possible concurrent PDT builds on this connection. Setting this value too high could negatively impact query times. For more information, see the Connecting Looker to your database documentation page.
    • Additional JDBC parameters: Specify additional parameters for the connection:
      • The s3_staging_dir parameter is the S3 bucket that Looker should use for query results output and PDTs; see the Specifying Your S3 bucket for query results output and PDTs section on this page.
      • Flag for streaming results. If you have the athena:GetQueryResultsStream policy attached to your Athena user, you can add ;UseResultsetStreaming=1 to the end of your additional JDBC parameterss to significantly improve the performance of large result set extraction. This parameter is set to 0 by default.
      • Optional additional parameters to add to the JDBC connection string.
    • SSL: Ignore; by default, all connections to the AWS API will be encrypted.
    • Max connections per node: By default, this is set to 5. You can increase this up to 20 if Looker is the main query engine running against Athena. See the Athena service limits documentation for more details about the service limits. See the Connecting Looker to your database documentation page for more information.
    • Connection Pool Timeout: Specify the connection pool timeout. By default, the timeout is set to 120 seconds. See the Connecting Looker to your database documentation page for more information.
    • SQL Runner Precache: Unselect this option if you prefer SQL Runner to load table information only when a table is selected. See the Connecting Looker to your database documentation page for more information.
    • Database Time Zone: Specify the time zone used in the database. Leave this field blank if you do not want time zone conversion. See the Using time zone settings documentation page for more information.

To verify that the connection is successful, click Test. See the Testing database connectivity documentation page for troubleshooting information.

To save these settings, click Connect.

Specifying your S3 bucket for query results output and PDTs

Use the Additional JDBC parameters field of the Connections page to configure the path to the S3 bucket that Looker will use for storing query results output, and to specify the name of the output directory in the S3 bucket where you want Looker to write PDTs. Specify this information using the s3_staging_dir parameter.

The s3_staging_dir JDBC parameter is an alternative way to configure the Amazon Athena S3OutputLocation property, which is required for Athena JDBC connections. See the Athena documentation on JDBC Driver Options for more information and a list of all available JDBC driver options.

In the Additional JDBC parameters field, specify the s3_staging_dir parameter using the following format:

`s3_staging_dir=s3://<s3-bucket>/<output-path>`

Where:

  • <s3-bucket> is the name of the S3 bucket.
  • <output-path> is the path where Looker will write query results output.

The AWS access key pair must have write permissions to the <s3-bucket> directory.

To configure the directory where Looker will write PDTs, enter the path of the directory in the S3 bucket in the Temp Database field. For example, if you want Looker to write PDTs into s3://<s3-bucket>/looker_scratch, then enter this in the Temp Database field:

`looker_scratch`

Only enter the path of the directory. Looker gets the S3 bucket name from the s3_staging_dir parameter that you enter in the Additional JDBC Parameters field.

S3 bucket considerations

It is recommended that you configure Amazon S3 object lifecycles to periodically clean out unneeded files in your specified S3 bucket. There are reasons for this:

  • Athena stores query results for every query in an S3 bucket. See Athena Querying.
  • If you have PDTs enabled, when a PDT is built, metadata about the created table is stored in the S3 bucket.

Resources

Debugging

Amazon provides LogLevel and LogPath JDBC driver options for debugging connections. To use them, add ;LogLevel=DEBUG;LogPath=/tmp/athena_debug.log to the end of the Additional JDBC Parameters field and test the connection again.

If Looker is hosting the instance, then Looker Support or your analyst will need to retrieve this file to continue debugging.

Feature support

For Looker to support some features, your database dialect must also support them.

Amazon Athena supports the following features as of Looker 24.14:

Feature Supported?
Support Level
Supported
Looker (Google Cloud core)
Yes
Symmetric Aggregates
Yes
Derived Tables
Yes
Persistent SQL Derived Tables
Yes
Persistent Native Derived Tables
Yes
Stable Views
Yes
Query Killing
Yes
SQL-based Pivots
Yes
Timezones
Yes
SSL
Yes
Subtotals
No
JDBC Additional Params
Yes
Case Sensitive
Yes
Location Type
Yes
List Type
Yes
Percentile
Yes
Distinct Percentile
No
SQL Runner Show Processes
No
SQL Runner Describe Table
Yes
SQL Runner Show Indexes
No
SQL Runner Select 10
Yes
SQL Runner Count
Yes
SQL Explain
No
Oauth Credentials
No
Context Comments
Yes
Connection Pooling
No
HLL Sketches
Yes
Aggregate Awareness
Yes
Incremental PDTs
No
Milliseconds
Yes
Microseconds
No
Materialized Views
No
Approximate Count Distinct
Yes

Next steps

After you have completed the database connection, configure authentication options.