Authorize the Logging agent

Note: Skip this guide and return to Install the Logging agent if you are using a Compute Engine VM instance, and you have not yet attempted to install the agent. Compute Engine instances should be pre-authorized to run the agent.

This guide explains how to ensure that the Logging agent , which you install on your virtual machine (VM) instance, is authorized to send telemetry data to Logging.

Authorization overview

Authorization refers to the process of determining what permissions an authenticated client has for a set of resources. Google Cloud authorizes the Logging agent on a Compute Engine VM instance by using application default credentials (ADC).

The Logging agent supports ADC that authenticate either a VM's attached service account, or a service account key.

• An attached service account refers to a service account that's specific to a given resource, such as a VM. The service account has its own unique credentials. ADC uses the VM's metadata server to obtain credentials for a service.
• A service account key refers to a private key used to authorize the key pair on a service account in a project, which lets you create an access token. You use the token to provide an identity so that you can interact with Google Cloud APIs on behalf of the service account.

We recommend that you configure ADC to authenticate by using an attached service account whenever possible, as the private key requires local storage, and that storage can be compromised. For more information about service account keys, see Best practices for managing service account keys.

For AWS EC2 VM instances, the Logging agent supports authentication only using the service account key method.

Before you begin

Read this guide if any of the following applies to you:

• If you're running very old Compute Engine instances or if you have modified the access scopes or service account settings for your Compute Engine instances, then you must complete the steps in this guide before installing the agent. These VMs might not have the required service account key file. For information about how to verify the access scopes and service account settings of your instances, see Verify Compute Engine credentials.

  On newly created Compute Engine VM instances, the access scopes and service account settings are sufficient to run the agents.

• If you're running Amazon EC2 (AWS VC2) VM instances, then do the following before installing the agent:

  1. Identify the AWS hosting project for the AWS account with your EC2 instances. The hosting project is a Google Cloud project whose sole purpose is to store the metrics and logs from the EC2 instances in an AWS account.

     If you can't find an AWS hosting project for the account, then we recommend that you create a Google Cloud project to serve as the hosting project. If you have EC2 instances in multiple AWS accounts, then create a Google Cloud project for each account. We also recommend that you use a naming convention for these projects or that you use project labels, so that you can identify your hosting projects. We don't recommend that you re-use an existing Google Cloud project, especially if it contains any Google Cloud resources.

  2. Complete the steps to authorize the agent by using a service account key file.

To verify your access scopes, do the following:

1. Query the access scopes by running the following command on your Compute Engine instance:

   curl --silent --connect-timeout 1 -f -H "Metadata-Flavor: Google" http://169.254.169.254/computeMetadata/v1/instance/service-accounts/default/scopes

2. In the command output, if the access scope https://www.googleapis.com/auth/cloud-platform is listed, then you have sufficient authorization.

   If https://www.googleapis.com/auth/cloud-platform isn't listed, then you require two access scopes, one from each of the following "logging" and "monitoring" pairs:

   • https://www.googleapis.com/auth/logging.write or
     https://www.googleapis.com/auth/logging.admin
   • https://www.googleapis.com/auth/monitoring.write or
     https://www.googleapis.com/auth/monitoring.admin

To modify your access scopes, do the following:

1. In the Google Cloud console, go to the VM instances page:

   Go to VM instances

   If you use the search bar to find this page, then select the result whose subheading is Compute Engine.

2. If necessary, click the drop-down list of Google Cloud projects and select the name of your project.
3. Select VM instances from the navigation menu, select the Instances tab, and the select the name of your VM.
4. Shut down the VM by clicking  Stop.
5. After the VM stops, click  Edit.
6. Locate the Access scopes in the Identity and API access section of the page, and then select Set access for each API.
7. For Stackdriver Logging API and Stackdriver Monitoring API entries, select the Write Only.
8. Click Save, and then restart the VM by clicking  Start/Resume.

Use a service account

Authentication refers to the process of determining a client's identity. For authentication, we recommend using a service account, a special kind of account that is typically used by an application or a workload, rather than a person. For more information, see Service accounts overview.

You can use service accounts for authentication regardless of where your code runs: on Compute Engine, App Engine, or on-premise. For more information, see Authentication at Google.

This section describes how to create a new service account and grant it the necessary roles, and how to update an existing service account if it doesn't have the necessary roles.

Create a service account

To create a service account, complete the Creating a service account procedures with the following information:

• Select the Google Cloud project in which to create the service account.

  • For Compute Engine instances, choose the project in which you created the instance.

  • For Amazon EC2 instances, select the AWS hosting project.

• In the Role drop-down menu, select the following roles:

  • Logging > Logs Writer. This authorizes the Logging agent to ingest logs.
  • Monitoring > Monitoring Metric Writer. This authorizes the Logging agent to ingest its own health metrics.

• If you plan to authenticate using a service account key, then select JSON as the Key type and click Create.

  When you click Create, a file that contains a service account key is downloaded to your local system. For more information, see Create and delete service account keys.

  Note: After you download a key, you cannot download that key again.

Next, configure your service account and settings based on whether you authorize by using attached service accounts or by using service account private keys.

Verify and modify roles of an existing service account

You can use the Google Cloud console to determine which roles an existing service account has, and to add any necessary roles that are missing:

1. In the Google Cloud console, go to the IAM page:

   Go to IAM

   If you use the search bar to find this page, then select the result whose subheading is IAM & Admin.

2. If necessary, click the drop-down list of Google Cloud projects and select the name of your project.

3. If you don't see a list of IAM principals (users and service accounts), then select the Permissions tab.

4. In the View by Principals list, locate the entry for the service account. The Role column lists the roles granted to the service account.

5. If your service account does not have the necessary roles for the Logging agent , then use the following steps to add the roles described in Create a service account:

   1. Click  Edit in the entry for the service account.
   2. Click Add Another Role to add any missing roles.
   3. Click Save.

Authorize with an attached service account

To authorize the Logging agent installed on a Compute Engine VM instance that has an attached service account, do the following:

1. Ensure that you verified the access scopes of your VM.

2. Grant your service account the least privileged IAM roles possible. For the required roles, see the Create a service account section of this page.

3. Attach the service account to the VM where the agent is running.

4. If you haven't already installed the agent, then install it. For information about how to install the agent, see Installing the agent.

Authorize with a service account key

To authorize the Logging agent installed on a VM instance by using service account private keys, do the following:

1. Transfer the service account key file from your local system to your VM instance:

   1. Create an environment variable to point to the service account key file on your local system. The following example creates a variable called CREDS:

      CREDS=~/Downloads/PROJECT-NAME-KEY-ID.json
      

   2. Complete the steps shown in the following table:

      Note: The following file-copy instructions assume that you have a Linux environment on both your local system and your instance. If you are using a different environment, consult the documentation from your cloud provider for how to copy the service account key file. Ensure that the service account key file are in the same location as the CREDS variable.

      Compute Engine

      1. In the Google Cloud console, go to the VM instances page:

         Go to VM instances

         If you use the search bar to find this page, then select the result whose subheading is Compute Engine.

         Identify the INSTANCE_NAME and INSTANCE_ZONE for your VM.

      2. On your local system, run a Google Cloud CLI command to copy the key file from your local system to your VM instance:

         REMOTE_USER="$USER"
         INSTANCE="INSTANCE_NAME"
         ZONE="INSTANCE_ZONE"
         gcloud compute scp "$CREDS" "$REMOTE_USER@$INSTANCE:~/temp.json" --zone "$ZONE"
         

      3. On your Compute Engine instance, move the service account key file from the temporary location to a permanent location, and for Linux, ensure that the service account key file is readable only by root.

         Warning: If you already have a service account key file, ensure that your new key file doesn't overwrite the key file for your current applications.

         These are the locations where the agent expects your key file:

         • Linux VMs: /etc/google/auth/application_default_credentials.json
         • Windows VMs: C:\ProgramData\Google\Auth\application_default_credentials.json
         • Linux and Windows VMs: Any location you store in the environment variable GOOGLE_APPLICATION_CREDENTIALS, which must be visible to the agent's process. For configuration information, see Set GOOGLE_APPLICATION_CREDENTIALS.

         For example, on Linux you can run the following script which moves the service account key file to the default location, and then sets the appropriate permissions:

         CREDENTIALS_FILE_LOCATION="/etc/google/auth/application_default_credentials.json"
         sudo mkdir -p /etc/google/auth
         sudo mv "$HOME/temp.json" "$CREDENTIALS_FILE_LOCATION"
         sudo chown root:root "$CREDENTIALS_FILE_LOCATION"
         sudo chmod 0400 "$CREDENTIALS_FILE_LOCATION"
         

      Amazon EC2

      1. For your VM, identify YOUR-INSTANCE'S-ID and YOUR-INSTANCE'S-AWS-REGION.

      2. On your local system, use scp to copy the service account key file from your local system to your VM instance:

         KEY="YOUR-SSH-KEY-PAIR-FILE"
         INSTANCE="ec2-YOUR-INSTANCE'S-ID.YOUR-INSTANCE'S-AWS-REGION.compute.amazonaws.com"
         # The remote user depends on the installed OS: ec2-user, ubuntu, root, etc.
         REMOTE_USER="EC2-USER"
         scp -i "$KEY" "$CREDS" "$REMOTE_USER@$INSTANCE:~/temp.json"
         

         The value of the INSTANCE environment variable assumes that your EC2 instance isn't in the us-east-1 region. To learn how to define the INSTANCE variable when your instance is in the us-east-1 region, see naming convention defined by Amazon.

      3. On your EC2 instance, move the service account key file from the the temporary location to one of the following locations, and for Linux, ensure that the service account key file is readable only by root.

         Warning: If you already have a service account key file, ensure that your new key file doesn't overwrite the key file for your current applications.

         These are the locations where the agent expects your key file:

         • Linux VMs: /etc/google/auth/application_default_credentials.json

         • Windows VMs: C:\ProgramData\Google\Auth\application_default_credentials.json

         • Linux and Windows VMs: Any location you store in the environment variable GOOGLE_APPLICATION_CREDENTIALS, which must be visible to the agent's process. For configuration information, see Set GOOGLE_APPLICATION_CREDENTIALS.

         For example, on Linux you can run the following script which moves the service account key file to the default location, and then sets the appropriate permissions:

         CREDENTIALS_FILE_LOCATION="/etc/google/auth/application_default_credentials.json"
         sudo mkdir -p /etc/google/auth
         sudo mv "$HOME/temp.json" "$CREDENTIALS_FILE_LOCATION"
         sudo chown root:root "$CREDENTIALS_FILE_LOCATION"
         sudo chmod 0400 "$CREDENTIALS_FILE_LOCATION"
         

2. Your VM instance now has the service account key file that the agent needs. Next, install or restart the agent:

   • For information about how to install the agent, see Installing the agent.

   • For information about how to restart the agent, see Restarting the agent.

   • If you would like to double-check the service account key file, see Verifying private-key credentials.

Set GOOGLE_APPLICATION_CREDENTIALS

This section shows how to set the environment variable GOOGLE_APPLICATION_CREDENTIALS so that it is visible to the agent's process.

Note: The Logging agent isn't the only service that uses the environment variable GOOGLE_APPLICATION_CREDENTIALS. If you change the value of this variable as described in this section, then that change affects all system services that rely on that variable.

Linux

1. Edit the following configuration file, or create the file if it doesn't exist:

   /etc/default/google-fluentd
   

2. Add the following to the configuration file:

   GOOGLE_APPLICATION_CREDENTIALS=PATH_TO_CREDENTIAL_FILE
   

3. Restart the agent by running the following command on your VM instance:

   sudo service google-fluentd restart
   

Windows

1. In PowerShell, run the following commands as administrator to set the GOOGLE_APPLICATION_CREDENTIALS system environment variable for the Ops Agent to use:

   [Environment]::SetEnvironmentVariable("GOOGLE_APPLICATION_CREDENTIALS", "PATH_TO_CREDENTIAL_FILE", "Machine")
   

2. Restart the agent by running the following command on your VM instance:

   Restart-Service -Name StackdriverLogging