Class MetricDescriptor.Builder (2.14.2)

public static final class MetricDescriptor.Builder extends GeneratedMessageV3.Builder<MetricDescriptor.Builder> implements MetricDescriptorOrBuilder

Defines a metric type and its schema. Once a metric descriptor is created, deleting or altering it stops data collection and makes the metric type's existing data unusable.

Protobuf type google.api.MetricDescriptor

Static Methods

getDescriptor()

public static final Descriptors.Descriptor getDescriptor()
Returns
TypeDescription
Descriptor

Methods

addAllLabels(Iterable<? extends LabelDescriptor> values)

public MetricDescriptor.Builder addAllLabels(Iterable<? extends LabelDescriptor> values)

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Parameter
NameDescription
valuesIterable<? extends com.google.api.LabelDescriptor>
Returns
TypeDescription
MetricDescriptor.Builder

addAllMonitoredResourceTypes(Iterable<String> values)

public MetricDescriptor.Builder addAllMonitoredResourceTypes(Iterable<String> values)

Read-only. If present, then a time series, which is identified partially by a metric type and a MonitoredResourceDescriptor, that is associated with this metric type can only be associated with one of the monitored resource types listed here.

repeated string monitored_resource_types = 13;

Parameter
NameDescription
valuesIterable<String>

The monitoredResourceTypes to add.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

addLabels(LabelDescriptor value)

public MetricDescriptor.Builder addLabels(LabelDescriptor value)

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Parameter
NameDescription
valueLabelDescriptor
Returns
TypeDescription
MetricDescriptor.Builder

addLabels(LabelDescriptor.Builder builderForValue)

public MetricDescriptor.Builder addLabels(LabelDescriptor.Builder builderForValue)

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Parameter
NameDescription
builderForValueLabelDescriptor.Builder
Returns
TypeDescription
MetricDescriptor.Builder

addLabels(int index, LabelDescriptor value)

public MetricDescriptor.Builder addLabels(int index, LabelDescriptor value)

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Parameters
NameDescription
indexint
valueLabelDescriptor
Returns
TypeDescription
MetricDescriptor.Builder

addLabels(int index, LabelDescriptor.Builder builderForValue)

public MetricDescriptor.Builder addLabels(int index, LabelDescriptor.Builder builderForValue)

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Parameters
NameDescription
indexint
builderForValueLabelDescriptor.Builder
Returns
TypeDescription
MetricDescriptor.Builder

addLabelsBuilder()

public LabelDescriptor.Builder addLabelsBuilder()

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Returns
TypeDescription
LabelDescriptor.Builder

addLabelsBuilder(int index)

public LabelDescriptor.Builder addLabelsBuilder(int index)

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Parameter
NameDescription
indexint
Returns
TypeDescription
LabelDescriptor.Builder

addMonitoredResourceTypes(String value)

public MetricDescriptor.Builder addMonitoredResourceTypes(String value)

Read-only. If present, then a time series, which is identified partially by a metric type and a MonitoredResourceDescriptor, that is associated with this metric type can only be associated with one of the monitored resource types listed here.

repeated string monitored_resource_types = 13;

Parameter
NameDescription
valueString

The monitoredResourceTypes to add.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

addMonitoredResourceTypesBytes(ByteString value)

public MetricDescriptor.Builder addMonitoredResourceTypesBytes(ByteString value)

Read-only. If present, then a time series, which is identified partially by a metric type and a MonitoredResourceDescriptor, that is associated with this metric type can only be associated with one of the monitored resource types listed here.

repeated string monitored_resource_types = 13;

Parameter
NameDescription
valueByteString

The bytes of the monitoredResourceTypes to add.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

addRepeatedField(Descriptors.FieldDescriptor field, Object value)

public MetricDescriptor.Builder addRepeatedField(Descriptors.FieldDescriptor field, Object value)
Parameters
NameDescription
fieldFieldDescriptor
valueObject
Returns
TypeDescription
MetricDescriptor.Builder
Overrides

build()

public MetricDescriptor build()
Returns
TypeDescription
MetricDescriptor

buildPartial()

public MetricDescriptor buildPartial()
Returns
TypeDescription
MetricDescriptor

clear()

public MetricDescriptor.Builder clear()
Returns
TypeDescription
MetricDescriptor.Builder
Overrides

clearDescription()

public MetricDescriptor.Builder clearDescription()

A detailed description of the metric, which can be used in documentation.

string description = 6;

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

clearDisplayName()

public MetricDescriptor.Builder clearDisplayName()

A concise name for the metric, which can be displayed in user interfaces. Use sentence case without an ending period, for example "Request count". This field is optional but it is recommended to be set for any metrics associated with user-visible concepts, such as Quota.

string display_name = 7;

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

clearField(Descriptors.FieldDescriptor field)

public MetricDescriptor.Builder clearField(Descriptors.FieldDescriptor field)
Parameter
NameDescription
fieldFieldDescriptor
Returns
TypeDescription
MetricDescriptor.Builder
Overrides

clearLabels()

public MetricDescriptor.Builder clearLabels()

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Returns
TypeDescription
MetricDescriptor.Builder

clearLaunchStage()

public MetricDescriptor.Builder clearLaunchStage()

Optional. The launch stage of the metric definition.

.google.api.LaunchStage launch_stage = 12;

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

clearMetadata()

public MetricDescriptor.Builder clearMetadata()

Optional. Metadata which can be used to guide usage of the metric.

.google.api.MetricDescriptor.MetricDescriptorMetadata metadata = 10;

Returns
TypeDescription
MetricDescriptor.Builder

clearMetricKind()

public MetricDescriptor.Builder clearMetricKind()

Whether the metric records instantaneous values, changes to a value, etc. Some combinations of metric_kind and value_type might not be supported.

.google.api.MetricDescriptor.MetricKind metric_kind = 3;

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

clearMonitoredResourceTypes()

public MetricDescriptor.Builder clearMonitoredResourceTypes()

Read-only. If present, then a time series, which is identified partially by a metric type and a MonitoredResourceDescriptor, that is associated with this metric type can only be associated with one of the monitored resource types listed here.

repeated string monitored_resource_types = 13;

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

clearName()

public MetricDescriptor.Builder clearName()

The resource name of the metric descriptor.

string name = 1;

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

clearOneof(Descriptors.OneofDescriptor oneof)

public MetricDescriptor.Builder clearOneof(Descriptors.OneofDescriptor oneof)
Parameter
NameDescription
oneofOneofDescriptor
Returns
TypeDescription
MetricDescriptor.Builder
Overrides

clearType()

public MetricDescriptor.Builder clearType()

The metric type, including its DNS name prefix. The type is not URL-encoded. All user-defined metric types have the DNS name custom.googleapis.com or external.googleapis.com. Metric types should use a natural hierarchical grouping. For example: "custom.googleapis.com/invoice/paid/amount" "external.googleapis.com/prometheus/up" "appengine.googleapis.com/http/server/response_latencies"

string type = 8;

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

clearUnit()

public MetricDescriptor.Builder clearUnit()

The units in which the metric value is reported. It is only applicable if the value_type is INT64, DOUBLE, or DISTRIBUTION. The unit defines the representation of the stored metric values. Different systems might scale the values to be more easily displayed (so a value of 0.02kBy might be displayed as 20By, and a value of 3523kBy might be displayed as 3.5MBy). However, if the unit is kBy, then the value of the metric is always in thousands of bytes, no matter how it might be displayed. If you want a custom metric to record the exact number of CPU-seconds used by a job, you can create an INT64 CUMULATIVE metric whose unit is s{CPU} (or equivalently 1s{CPU} or just s). If the job uses 12,005 CPU-seconds, then the value is written as 12005. Alternatively, if you want a custom metric to record data in a more granular way, you can create a DOUBLE CUMULATIVE metric whose unit is ks{CPU}, and then write the value 12.005 (which is 12005/1000), or use Kis{CPU} and write 11.723 (which is 12005/1024). The supported units are a subset of The Unified Code for Units of Measure standard: Basic units (UNIT)

  • bit bit
  • By byte
  • s second
  • min minute
  • h hour
  • d day
  • 1 dimensionless Prefixes (PREFIX)
  • k kilo (10^3)
  • M mega (10^6)
  • G giga (10^9)
  • T tera (10^12)
  • P peta (10^15)
  • E exa (10^18)
  • Z zetta (10^21)
  • Y yotta (10^24)
  • m milli (10^-3)
  • u micro (10^-6)
  • n nano (10^-9)
  • p pico (10^-12)
  • f femto (10^-15)
  • a atto (10^-18)
  • z zepto (10^-21)
  • y yocto (10^-24)
  • Ki kibi (2^10)
  • Mi mebi (2^20)
  • Gi gibi (2^30)
  • Ti tebi (2^40)
  • Pi pebi (2^50) Grammar The grammar also includes these connectors:
  • / division or ratio (as an infix operator). For examples, kBy/{email} or MiBy/10ms (although you should almost never have /s in a metric unit; rates should always be computed at query time from the underlying cumulative or delta value).
  • . multiplication or composition (as an infix operator). For examples, GBy.d or k{watt}.h. The grammar for a unit is as follows: Expression = Component { "." Component } { "/" Component } ; Component = ( [ PREFIX ] UNIT | "%" ) [ Annotation ] | Annotation | "1" ; Annotation = "{" NAME "}" ; Notes:
  • Annotation is just a comment if it follows a UNIT. If the annotation is used alone, then the unit is equivalent to 1. For examples, {request}/s == 1/s, By{transmitted}/s == By/s.
  • NAME is a sequence of non-blank printable ASCII characters not containing { or }.
  • 1 represents a unitary dimensionless unit of 1, such as in 1/s. It is typically used when none of the basic units are appropriate. For example, "new users per day" can be represented as 1/d or {new-users}/d (and a metric value 5 would mean "5 new users). Alternatively, "thousands of page views per day" would be represented as 1000/d or k1/d or k{page_views}/d (and a metric value of 5.3 would mean "5300 page views per day").
  • % represents dimensionless value of 1/100, and annotates values giving a percentage (so the metric values are typically in the range of 0..100, and a metric value 3 means "3 percent").
  • 10^2.% indicates a metric contains a ratio, typically in the range 0..1, that will be multiplied by 100 and displayed as a percentage (so a metric value 0.03 means "3 percent").

string unit = 5;

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

clearValueType()

public MetricDescriptor.Builder clearValueType()

Whether the measurement is an integer, a floating-point number, etc. Some combinations of metric_kind and value_type might not be supported.

.google.api.MetricDescriptor.ValueType value_type = 4;

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

clone()

public MetricDescriptor.Builder clone()
Returns
TypeDescription
MetricDescriptor.Builder
Overrides

getDefaultInstanceForType()

public MetricDescriptor getDefaultInstanceForType()
Returns
TypeDescription
MetricDescriptor

getDescription()

public String getDescription()

A detailed description of the metric, which can be used in documentation.

string description = 6;

Returns
TypeDescription
String

The description.

getDescriptionBytes()

public ByteString getDescriptionBytes()

A detailed description of the metric, which can be used in documentation.

string description = 6;

Returns
TypeDescription
ByteString

The bytes for description.

getDescriptorForType()

public Descriptors.Descriptor getDescriptorForType()
Returns
TypeDescription
Descriptor
Overrides

getDisplayName()

public String getDisplayName()

A concise name for the metric, which can be displayed in user interfaces. Use sentence case without an ending period, for example "Request count". This field is optional but it is recommended to be set for any metrics associated with user-visible concepts, such as Quota.

string display_name = 7;

Returns
TypeDescription
String

The displayName.

getDisplayNameBytes()

public ByteString getDisplayNameBytes()

A concise name for the metric, which can be displayed in user interfaces. Use sentence case without an ending period, for example "Request count". This field is optional but it is recommended to be set for any metrics associated with user-visible concepts, such as Quota.

string display_name = 7;

Returns
TypeDescription
ByteString

The bytes for displayName.

getLabels(int index)

public LabelDescriptor getLabels(int index)

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Parameter
NameDescription
indexint
Returns
TypeDescription
LabelDescriptor

getLabelsBuilder(int index)

public LabelDescriptor.Builder getLabelsBuilder(int index)

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Parameter
NameDescription
indexint
Returns
TypeDescription
LabelDescriptor.Builder

getLabelsBuilderList()

public List<LabelDescriptor.Builder> getLabelsBuilderList()

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Returns
TypeDescription
List<Builder>

getLabelsCount()

public int getLabelsCount()

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Returns
TypeDescription
int

getLabelsList()

public List<LabelDescriptor> getLabelsList()

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Returns
TypeDescription
List<LabelDescriptor>

getLabelsOrBuilder(int index)

public LabelDescriptorOrBuilder getLabelsOrBuilder(int index)

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Parameter
NameDescription
indexint
Returns
TypeDescription
LabelDescriptorOrBuilder

getLabelsOrBuilderList()

public List<? extends LabelDescriptorOrBuilder> getLabelsOrBuilderList()

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Returns
TypeDescription
List<? extends com.google.api.LabelDescriptorOrBuilder>

getLaunchStage()

public LaunchStage getLaunchStage()

Optional. The launch stage of the metric definition.

.google.api.LaunchStage launch_stage = 12;

Returns
TypeDescription
LaunchStage

The launchStage.

getLaunchStageValue()

public int getLaunchStageValue()

Optional. The launch stage of the metric definition.

.google.api.LaunchStage launch_stage = 12;

Returns
TypeDescription
int

The enum numeric value on the wire for launchStage.

getMetadata()

public MetricDescriptor.MetricDescriptorMetadata getMetadata()

Optional. Metadata which can be used to guide usage of the metric.

.google.api.MetricDescriptor.MetricDescriptorMetadata metadata = 10;

Returns
TypeDescription
MetricDescriptor.MetricDescriptorMetadata

The metadata.

getMetadataBuilder()

public MetricDescriptor.MetricDescriptorMetadata.Builder getMetadataBuilder()

Optional. Metadata which can be used to guide usage of the metric.

.google.api.MetricDescriptor.MetricDescriptorMetadata metadata = 10;

Returns
TypeDescription
MetricDescriptor.MetricDescriptorMetadata.Builder

getMetadataOrBuilder()

public MetricDescriptor.MetricDescriptorMetadataOrBuilder getMetadataOrBuilder()

Optional. Metadata which can be used to guide usage of the metric.

.google.api.MetricDescriptor.MetricDescriptorMetadata metadata = 10;

Returns
TypeDescription
MetricDescriptor.MetricDescriptorMetadataOrBuilder

getMetricKind()

public MetricDescriptor.MetricKind getMetricKind()

Whether the metric records instantaneous values, changes to a value, etc. Some combinations of metric_kind and value_type might not be supported.

.google.api.MetricDescriptor.MetricKind metric_kind = 3;

Returns
TypeDescription
MetricDescriptor.MetricKind

The metricKind.

getMetricKindValue()

public int getMetricKindValue()

Whether the metric records instantaneous values, changes to a value, etc. Some combinations of metric_kind and value_type might not be supported.

.google.api.MetricDescriptor.MetricKind metric_kind = 3;

Returns
TypeDescription
int

The enum numeric value on the wire for metricKind.

getMonitoredResourceTypes(int index)

public String getMonitoredResourceTypes(int index)

Read-only. If present, then a time series, which is identified partially by a metric type and a MonitoredResourceDescriptor, that is associated with this metric type can only be associated with one of the monitored resource types listed here.

repeated string monitored_resource_types = 13;

Parameter
NameDescription
indexint

The index of the element to return.

Returns
TypeDescription
String

The monitoredResourceTypes at the given index.

getMonitoredResourceTypesBytes(int index)

public ByteString getMonitoredResourceTypesBytes(int index)

Read-only. If present, then a time series, which is identified partially by a metric type and a MonitoredResourceDescriptor, that is associated with this metric type can only be associated with one of the monitored resource types listed here.

repeated string monitored_resource_types = 13;

Parameter
NameDescription
indexint

The index of the value to return.

Returns
TypeDescription
ByteString

The bytes of the monitoredResourceTypes at the given index.

getMonitoredResourceTypesCount()

public int getMonitoredResourceTypesCount()

Read-only. If present, then a time series, which is identified partially by a metric type and a MonitoredResourceDescriptor, that is associated with this metric type can only be associated with one of the monitored resource types listed here.

repeated string monitored_resource_types = 13;

Returns
TypeDescription
int

The count of monitoredResourceTypes.

getMonitoredResourceTypesList()

public ProtocolStringList getMonitoredResourceTypesList()

Read-only. If present, then a time series, which is identified partially by a metric type and a MonitoredResourceDescriptor, that is associated with this metric type can only be associated with one of the monitored resource types listed here.

repeated string monitored_resource_types = 13;

Returns
TypeDescription
ProtocolStringList

A list containing the monitoredResourceTypes.

getName()

public String getName()

The resource name of the metric descriptor.

string name = 1;

Returns
TypeDescription
String

The name.

getNameBytes()

public ByteString getNameBytes()

The resource name of the metric descriptor.

string name = 1;

Returns
TypeDescription
ByteString

The bytes for name.

getType()

public String getType()

The metric type, including its DNS name prefix. The type is not URL-encoded. All user-defined metric types have the DNS name custom.googleapis.com or external.googleapis.com. Metric types should use a natural hierarchical grouping. For example: "custom.googleapis.com/invoice/paid/amount" "external.googleapis.com/prometheus/up" "appengine.googleapis.com/http/server/response_latencies"

string type = 8;

Returns
TypeDescription
String

The type.

getTypeBytes()

public ByteString getTypeBytes()

The metric type, including its DNS name prefix. The type is not URL-encoded. All user-defined metric types have the DNS name custom.googleapis.com or external.googleapis.com. Metric types should use a natural hierarchical grouping. For example: "custom.googleapis.com/invoice/paid/amount" "external.googleapis.com/prometheus/up" "appengine.googleapis.com/http/server/response_latencies"

string type = 8;

Returns
TypeDescription
ByteString

The bytes for type.

getUnit()

public String getUnit()

The units in which the metric value is reported. It is only applicable if the value_type is INT64, DOUBLE, or DISTRIBUTION. The unit defines the representation of the stored metric values. Different systems might scale the values to be more easily displayed (so a value of 0.02kBy might be displayed as 20By, and a value of 3523kBy might be displayed as 3.5MBy). However, if the unit is kBy, then the value of the metric is always in thousands of bytes, no matter how it might be displayed. If you want a custom metric to record the exact number of CPU-seconds used by a job, you can create an INT64 CUMULATIVE metric whose unit is s{CPU} (or equivalently 1s{CPU} or just s). If the job uses 12,005 CPU-seconds, then the value is written as 12005. Alternatively, if you want a custom metric to record data in a more granular way, you can create a DOUBLE CUMULATIVE metric whose unit is ks{CPU}, and then write the value 12.005 (which is 12005/1000), or use Kis{CPU} and write 11.723 (which is 12005/1024). The supported units are a subset of The Unified Code for Units of Measure standard: Basic units (UNIT)

  • bit bit
  • By byte
  • s second
  • min minute
  • h hour
  • d day
  • 1 dimensionless Prefixes (PREFIX)
  • k kilo (10^3)
  • M mega (10^6)
  • G giga (10^9)
  • T tera (10^12)
  • P peta (10^15)
  • E exa (10^18)
  • Z zetta (10^21)
  • Y yotta (10^24)
  • m milli (10^-3)
  • u micro (10^-6)
  • n nano (10^-9)
  • p pico (10^-12)
  • f femto (10^-15)
  • a atto (10^-18)
  • z zepto (10^-21)
  • y yocto (10^-24)
  • Ki kibi (2^10)
  • Mi mebi (2^20)
  • Gi gibi (2^30)
  • Ti tebi (2^40)
  • Pi pebi (2^50) Grammar The grammar also includes these connectors:
  • / division or ratio (as an infix operator). For examples, kBy/{email} or MiBy/10ms (although you should almost never have /s in a metric unit; rates should always be computed at query time from the underlying cumulative or delta value).
  • . multiplication or composition (as an infix operator). For examples, GBy.d or k{watt}.h. The grammar for a unit is as follows: Expression = Component { "." Component } { "/" Component } ; Component = ( [ PREFIX ] UNIT | "%" ) [ Annotation ] | Annotation | "1" ; Annotation = "{" NAME "}" ; Notes:
  • Annotation is just a comment if it follows a UNIT. If the annotation is used alone, then the unit is equivalent to 1. For examples, {request}/s == 1/s, By{transmitted}/s == By/s.
  • NAME is a sequence of non-blank printable ASCII characters not containing { or }.
  • 1 represents a unitary dimensionless unit of 1, such as in 1/s. It is typically used when none of the basic units are appropriate. For example, "new users per day" can be represented as 1/d or {new-users}/d (and a metric value 5 would mean "5 new users). Alternatively, "thousands of page views per day" would be represented as 1000/d or k1/d or k{page_views}/d (and a metric value of 5.3 would mean "5300 page views per day").
  • % represents dimensionless value of 1/100, and annotates values giving a percentage (so the metric values are typically in the range of 0..100, and a metric value 3 means "3 percent").
  • 10^2.% indicates a metric contains a ratio, typically in the range 0..1, that will be multiplied by 100 and displayed as a percentage (so a metric value 0.03 means "3 percent").

string unit = 5;

Returns
TypeDescription
String

The unit.

getUnitBytes()

public ByteString getUnitBytes()

The units in which the metric value is reported. It is only applicable if the value_type is INT64, DOUBLE, or DISTRIBUTION. The unit defines the representation of the stored metric values. Different systems might scale the values to be more easily displayed (so a value of 0.02kBy might be displayed as 20By, and a value of 3523kBy might be displayed as 3.5MBy). However, if the unit is kBy, then the value of the metric is always in thousands of bytes, no matter how it might be displayed. If you want a custom metric to record the exact number of CPU-seconds used by a job, you can create an INT64 CUMULATIVE metric whose unit is s{CPU} (or equivalently 1s{CPU} or just s). If the job uses 12,005 CPU-seconds, then the value is written as 12005. Alternatively, if you want a custom metric to record data in a more granular way, you can create a DOUBLE CUMULATIVE metric whose unit is ks{CPU}, and then write the value 12.005 (which is 12005/1000), or use Kis{CPU} and write 11.723 (which is 12005/1024). The supported units are a subset of The Unified Code for Units of Measure standard: Basic units (UNIT)

  • bit bit
  • By byte
  • s second
  • min minute
  • h hour
  • d day
  • 1 dimensionless Prefixes (PREFIX)
  • k kilo (10^3)
  • M mega (10^6)
  • G giga (10^9)
  • T tera (10^12)
  • P peta (10^15)
  • E exa (10^18)
  • Z zetta (10^21)
  • Y yotta (10^24)
  • m milli (10^-3)
  • u micro (10^-6)
  • n nano (10^-9)
  • p pico (10^-12)
  • f femto (10^-15)
  • a atto (10^-18)
  • z zepto (10^-21)
  • y yocto (10^-24)
  • Ki kibi (2^10)
  • Mi mebi (2^20)
  • Gi gibi (2^30)
  • Ti tebi (2^40)
  • Pi pebi (2^50) Grammar The grammar also includes these connectors:
  • / division or ratio (as an infix operator). For examples, kBy/{email} or MiBy/10ms (although you should almost never have /s in a metric unit; rates should always be computed at query time from the underlying cumulative or delta value).
  • . multiplication or composition (as an infix operator). For examples, GBy.d or k{watt}.h. The grammar for a unit is as follows: Expression = Component { "." Component } { "/" Component } ; Component = ( [ PREFIX ] UNIT | "%" ) [ Annotation ] | Annotation | "1" ; Annotation = "{" NAME "}" ; Notes:
  • Annotation is just a comment if it follows a UNIT. If the annotation is used alone, then the unit is equivalent to 1. For examples, {request}/s == 1/s, By{transmitted}/s == By/s.
  • NAME is a sequence of non-blank printable ASCII characters not containing { or }.
  • 1 represents a unitary dimensionless unit of 1, such as in 1/s. It is typically used when none of the basic units are appropriate. For example, "new users per day" can be represented as 1/d or {new-users}/d (and a metric value 5 would mean "5 new users). Alternatively, "thousands of page views per day" would be represented as 1000/d or k1/d or k{page_views}/d (and a metric value of 5.3 would mean "5300 page views per day").
  • % represents dimensionless value of 1/100, and annotates values giving a percentage (so the metric values are typically in the range of 0..100, and a metric value 3 means "3 percent").
  • 10^2.% indicates a metric contains a ratio, typically in the range 0..1, that will be multiplied by 100 and displayed as a percentage (so a metric value 0.03 means "3 percent").

string unit = 5;

Returns
TypeDescription
ByteString

The bytes for unit.

getValueType()

public MetricDescriptor.ValueType getValueType()

Whether the measurement is an integer, a floating-point number, etc. Some combinations of metric_kind and value_type might not be supported.

.google.api.MetricDescriptor.ValueType value_type = 4;

Returns
TypeDescription
MetricDescriptor.ValueType

The valueType.

getValueTypeValue()

public int getValueTypeValue()

Whether the measurement is an integer, a floating-point number, etc. Some combinations of metric_kind and value_type might not be supported.

.google.api.MetricDescriptor.ValueType value_type = 4;

Returns
TypeDescription
int

The enum numeric value on the wire for valueType.

hasMetadata()

public boolean hasMetadata()

Optional. Metadata which can be used to guide usage of the metric.

.google.api.MetricDescriptor.MetricDescriptorMetadata metadata = 10;

Returns
TypeDescription
boolean

Whether the metadata field is set.

internalGetFieldAccessorTable()

protected GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
Returns
TypeDescription
FieldAccessorTable
Overrides

isInitialized()

public final boolean isInitialized()
Returns
TypeDescription
boolean
Overrides

mergeFrom(MetricDescriptor other)

public MetricDescriptor.Builder mergeFrom(MetricDescriptor other)
Parameter
NameDescription
otherMetricDescriptor
Returns
TypeDescription
MetricDescriptor.Builder

mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

public MetricDescriptor.Builder mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)
Parameters
NameDescription
inputCodedInputStream
extensionRegistryExtensionRegistryLite
Returns
TypeDescription
MetricDescriptor.Builder
Overrides Exceptions
TypeDescription
IOException

mergeFrom(Message other)

public MetricDescriptor.Builder mergeFrom(Message other)
Parameter
NameDescription
otherMessage
Returns
TypeDescription
MetricDescriptor.Builder
Overrides

mergeMetadata(MetricDescriptor.MetricDescriptorMetadata value)

public MetricDescriptor.Builder mergeMetadata(MetricDescriptor.MetricDescriptorMetadata value)

Optional. Metadata which can be used to guide usage of the metric.

.google.api.MetricDescriptor.MetricDescriptorMetadata metadata = 10;

Parameter
NameDescription
valueMetricDescriptor.MetricDescriptorMetadata
Returns
TypeDescription
MetricDescriptor.Builder

mergeUnknownFields(UnknownFieldSet unknownFields)

public final MetricDescriptor.Builder mergeUnknownFields(UnknownFieldSet unknownFields)
Parameter
NameDescription
unknownFieldsUnknownFieldSet
Returns
TypeDescription
MetricDescriptor.Builder
Overrides

removeLabels(int index)

public MetricDescriptor.Builder removeLabels(int index)

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Parameter
NameDescription
indexint
Returns
TypeDescription
MetricDescriptor.Builder

setDescription(String value)

public MetricDescriptor.Builder setDescription(String value)

A detailed description of the metric, which can be used in documentation.

string description = 6;

Parameter
NameDescription
valueString

The description to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setDescriptionBytes(ByteString value)

public MetricDescriptor.Builder setDescriptionBytes(ByteString value)

A detailed description of the metric, which can be used in documentation.

string description = 6;

Parameter
NameDescription
valueByteString

The bytes for description to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setDisplayName(String value)

public MetricDescriptor.Builder setDisplayName(String value)

A concise name for the metric, which can be displayed in user interfaces. Use sentence case without an ending period, for example "Request count". This field is optional but it is recommended to be set for any metrics associated with user-visible concepts, such as Quota.

string display_name = 7;

Parameter
NameDescription
valueString

The displayName to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setDisplayNameBytes(ByteString value)

public MetricDescriptor.Builder setDisplayNameBytes(ByteString value)

A concise name for the metric, which can be displayed in user interfaces. Use sentence case without an ending period, for example "Request count". This field is optional but it is recommended to be set for any metrics associated with user-visible concepts, such as Quota.

string display_name = 7;

Parameter
NameDescription
valueByteString

The bytes for displayName to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setField(Descriptors.FieldDescriptor field, Object value)

public MetricDescriptor.Builder setField(Descriptors.FieldDescriptor field, Object value)
Parameters
NameDescription
fieldFieldDescriptor
valueObject
Returns
TypeDescription
MetricDescriptor.Builder
Overrides

setLabels(int index, LabelDescriptor value)

public MetricDescriptor.Builder setLabels(int index, LabelDescriptor value)

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Parameters
NameDescription
indexint
valueLabelDescriptor
Returns
TypeDescription
MetricDescriptor.Builder

setLabels(int index, LabelDescriptor.Builder builderForValue)

public MetricDescriptor.Builder setLabels(int index, LabelDescriptor.Builder builderForValue)

The set of labels that can be used to describe a specific instance of this metric type. For example, the appengine.googleapis.com/http/server/response_latencies metric type has a label for the HTTP response code, response_code, so you can look at latencies for successful responses or just for responses that failed.

repeated .google.api.LabelDescriptor labels = 2;

Parameters
NameDescription
indexint
builderForValueLabelDescriptor.Builder
Returns
TypeDescription
MetricDescriptor.Builder

setLaunchStage(LaunchStage value)

public MetricDescriptor.Builder setLaunchStage(LaunchStage value)

Optional. The launch stage of the metric definition.

.google.api.LaunchStage launch_stage = 12;

Parameter
NameDescription
valueLaunchStage

The launchStage to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setLaunchStageValue(int value)

public MetricDescriptor.Builder setLaunchStageValue(int value)

Optional. The launch stage of the metric definition.

.google.api.LaunchStage launch_stage = 12;

Parameter
NameDescription
valueint

The enum numeric value on the wire for launchStage to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setMetadata(MetricDescriptor.MetricDescriptorMetadata value)

public MetricDescriptor.Builder setMetadata(MetricDescriptor.MetricDescriptorMetadata value)

Optional. Metadata which can be used to guide usage of the metric.

.google.api.MetricDescriptor.MetricDescriptorMetadata metadata = 10;

Parameter
NameDescription
valueMetricDescriptor.MetricDescriptorMetadata
Returns
TypeDescription
MetricDescriptor.Builder

setMetadata(MetricDescriptor.MetricDescriptorMetadata.Builder builderForValue)

public MetricDescriptor.Builder setMetadata(MetricDescriptor.MetricDescriptorMetadata.Builder builderForValue)

Optional. Metadata which can be used to guide usage of the metric.

.google.api.MetricDescriptor.MetricDescriptorMetadata metadata = 10;

Parameter
NameDescription
builderForValueMetricDescriptor.MetricDescriptorMetadata.Builder
Returns
TypeDescription
MetricDescriptor.Builder

setMetricKind(MetricDescriptor.MetricKind value)

public MetricDescriptor.Builder setMetricKind(MetricDescriptor.MetricKind value)

Whether the metric records instantaneous values, changes to a value, etc. Some combinations of metric_kind and value_type might not be supported.

.google.api.MetricDescriptor.MetricKind metric_kind = 3;

Parameter
NameDescription
valueMetricDescriptor.MetricKind

The metricKind to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setMetricKindValue(int value)

public MetricDescriptor.Builder setMetricKindValue(int value)

Whether the metric records instantaneous values, changes to a value, etc. Some combinations of metric_kind and value_type might not be supported.

.google.api.MetricDescriptor.MetricKind metric_kind = 3;

Parameter
NameDescription
valueint

The enum numeric value on the wire for metricKind to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setMonitoredResourceTypes(int index, String value)

public MetricDescriptor.Builder setMonitoredResourceTypes(int index, String value)

Read-only. If present, then a time series, which is identified partially by a metric type and a MonitoredResourceDescriptor, that is associated with this metric type can only be associated with one of the monitored resource types listed here.

repeated string monitored_resource_types = 13;

Parameters
NameDescription
indexint

The index to set the value at.

valueString

The monitoredResourceTypes to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setName(String value)

public MetricDescriptor.Builder setName(String value)

The resource name of the metric descriptor.

string name = 1;

Parameter
NameDescription
valueString

The name to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setNameBytes(ByteString value)

public MetricDescriptor.Builder setNameBytes(ByteString value)

The resource name of the metric descriptor.

string name = 1;

Parameter
NameDescription
valueByteString

The bytes for name to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

public MetricDescriptor.Builder setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)
Parameters
NameDescription
fieldFieldDescriptor
indexint
valueObject
Returns
TypeDescription
MetricDescriptor.Builder
Overrides

setType(String value)

public MetricDescriptor.Builder setType(String value)

The metric type, including its DNS name prefix. The type is not URL-encoded. All user-defined metric types have the DNS name custom.googleapis.com or external.googleapis.com. Metric types should use a natural hierarchical grouping. For example: "custom.googleapis.com/invoice/paid/amount" "external.googleapis.com/prometheus/up" "appengine.googleapis.com/http/server/response_latencies"

string type = 8;

Parameter
NameDescription
valueString

The type to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setTypeBytes(ByteString value)

public MetricDescriptor.Builder setTypeBytes(ByteString value)

The metric type, including its DNS name prefix. The type is not URL-encoded. All user-defined metric types have the DNS name custom.googleapis.com or external.googleapis.com. Metric types should use a natural hierarchical grouping. For example: "custom.googleapis.com/invoice/paid/amount" "external.googleapis.com/prometheus/up" "appengine.googleapis.com/http/server/response_latencies"

string type = 8;

Parameter
NameDescription
valueByteString

The bytes for type to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setUnit(String value)

public MetricDescriptor.Builder setUnit(String value)

The units in which the metric value is reported. It is only applicable if the value_type is INT64, DOUBLE, or DISTRIBUTION. The unit defines the representation of the stored metric values. Different systems might scale the values to be more easily displayed (so a value of 0.02kBy might be displayed as 20By, and a value of 3523kBy might be displayed as 3.5MBy). However, if the unit is kBy, then the value of the metric is always in thousands of bytes, no matter how it might be displayed. If you want a custom metric to record the exact number of CPU-seconds used by a job, you can create an INT64 CUMULATIVE metric whose unit is s{CPU} (or equivalently 1s{CPU} or just s). If the job uses 12,005 CPU-seconds, then the value is written as 12005. Alternatively, if you want a custom metric to record data in a more granular way, you can create a DOUBLE CUMULATIVE metric whose unit is ks{CPU}, and then write the value 12.005 (which is 12005/1000), or use Kis{CPU} and write 11.723 (which is 12005/1024). The supported units are a subset of The Unified Code for Units of Measure standard: Basic units (UNIT)

  • bit bit
  • By byte
  • s second
  • min minute
  • h hour
  • d day
  • 1 dimensionless Prefixes (PREFIX)
  • k kilo (10^3)
  • M mega (10^6)
  • G giga (10^9)
  • T tera (10^12)
  • P peta (10^15)
  • E exa (10^18)
  • Z zetta (10^21)
  • Y yotta (10^24)
  • m milli (10^-3)
  • u micro (10^-6)
  • n nano (10^-9)
  • p pico (10^-12)
  • f femto (10^-15)
  • a atto (10^-18)
  • z zepto (10^-21)
  • y yocto (10^-24)
  • Ki kibi (2^10)
  • Mi mebi (2^20)
  • Gi gibi (2^30)
  • Ti tebi (2^40)
  • Pi pebi (2^50) Grammar The grammar also includes these connectors:
  • / division or ratio (as an infix operator). For examples, kBy/{email} or MiBy/10ms (although you should almost never have /s in a metric unit; rates should always be computed at query time from the underlying cumulative or delta value).
  • . multiplication or composition (as an infix operator). For examples, GBy.d or k{watt}.h. The grammar for a unit is as follows: Expression = Component { "." Component } { "/" Component } ; Component = ( [ PREFIX ] UNIT | "%" ) [ Annotation ] | Annotation | "1" ; Annotation = "{" NAME "}" ; Notes:
  • Annotation is just a comment if it follows a UNIT. If the annotation is used alone, then the unit is equivalent to 1. For examples, {request}/s == 1/s, By{transmitted}/s == By/s.
  • NAME is a sequence of non-blank printable ASCII characters not containing { or }.
  • 1 represents a unitary dimensionless unit of 1, such as in 1/s. It is typically used when none of the basic units are appropriate. For example, "new users per day" can be represented as 1/d or {new-users}/d (and a metric value 5 would mean "5 new users). Alternatively, "thousands of page views per day" would be represented as 1000/d or k1/d or k{page_views}/d (and a metric value of 5.3 would mean "5300 page views per day").
  • % represents dimensionless value of 1/100, and annotates values giving a percentage (so the metric values are typically in the range of 0..100, and a metric value 3 means "3 percent").
  • 10^2.% indicates a metric contains a ratio, typically in the range 0..1, that will be multiplied by 100 and displayed as a percentage (so a metric value 0.03 means "3 percent").

string unit = 5;

Parameter
NameDescription
valueString

The unit to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setUnitBytes(ByteString value)

public MetricDescriptor.Builder setUnitBytes(ByteString value)

The units in which the metric value is reported. It is only applicable if the value_type is INT64, DOUBLE, or DISTRIBUTION. The unit defines the representation of the stored metric values. Different systems might scale the values to be more easily displayed (so a value of 0.02kBy might be displayed as 20By, and a value of 3523kBy might be displayed as 3.5MBy). However, if the unit is kBy, then the value of the metric is always in thousands of bytes, no matter how it might be displayed. If you want a custom metric to record the exact number of CPU-seconds used by a job, you can create an INT64 CUMULATIVE metric whose unit is s{CPU} (or equivalently 1s{CPU} or just s). If the job uses 12,005 CPU-seconds, then the value is written as 12005. Alternatively, if you want a custom metric to record data in a more granular way, you can create a DOUBLE CUMULATIVE metric whose unit is ks{CPU}, and then write the value 12.005 (which is 12005/1000), or use Kis{CPU} and write 11.723 (which is 12005/1024). The supported units are a subset of The Unified Code for Units of Measure standard: Basic units (UNIT)

  • bit bit
  • By byte
  • s second
  • min minute
  • h hour
  • d day
  • 1 dimensionless Prefixes (PREFIX)
  • k kilo (10^3)
  • M mega (10^6)
  • G giga (10^9)
  • T tera (10^12)
  • P peta (10^15)
  • E exa (10^18)
  • Z zetta (10^21)
  • Y yotta (10^24)
  • m milli (10^-3)
  • u micro (10^-6)
  • n nano (10^-9)
  • p pico (10^-12)
  • f femto (10^-15)
  • a atto (10^-18)
  • z zepto (10^-21)
  • y yocto (10^-24)
  • Ki kibi (2^10)
  • Mi mebi (2^20)
  • Gi gibi (2^30)
  • Ti tebi (2^40)
  • Pi pebi (2^50) Grammar The grammar also includes these connectors:
  • / division or ratio (as an infix operator). For examples, kBy/{email} or MiBy/10ms (although you should almost never have /s in a metric unit; rates should always be computed at query time from the underlying cumulative or delta value).
  • . multiplication or composition (as an infix operator). For examples, GBy.d or k{watt}.h. The grammar for a unit is as follows: Expression = Component { "." Component } { "/" Component } ; Component = ( [ PREFIX ] UNIT | "%" ) [ Annotation ] | Annotation | "1" ; Annotation = "{" NAME "}" ; Notes:
  • Annotation is just a comment if it follows a UNIT. If the annotation is used alone, then the unit is equivalent to 1. For examples, {request}/s == 1/s, By{transmitted}/s == By/s.
  • NAME is a sequence of non-blank printable ASCII characters not containing { or }.
  • 1 represents a unitary dimensionless unit of 1, such as in 1/s. It is typically used when none of the basic units are appropriate. For example, "new users per day" can be represented as 1/d or {new-users}/d (and a metric value 5 would mean "5 new users). Alternatively, "thousands of page views per day" would be represented as 1000/d or k1/d or k{page_views}/d (and a metric value of 5.3 would mean "5300 page views per day").
  • % represents dimensionless value of 1/100, and annotates values giving a percentage (so the metric values are typically in the range of 0..100, and a metric value 3 means "3 percent").
  • 10^2.% indicates a metric contains a ratio, typically in the range 0..1, that will be multiplied by 100 and displayed as a percentage (so a metric value 0.03 means "3 percent").

string unit = 5;

Parameter
NameDescription
valueByteString

The bytes for unit to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setUnknownFields(UnknownFieldSet unknownFields)

public final MetricDescriptor.Builder setUnknownFields(UnknownFieldSet unknownFields)
Parameter
NameDescription
unknownFieldsUnknownFieldSet
Returns
TypeDescription
MetricDescriptor.Builder
Overrides

setValueType(MetricDescriptor.ValueType value)

public MetricDescriptor.Builder setValueType(MetricDescriptor.ValueType value)

Whether the measurement is an integer, a floating-point number, etc. Some combinations of metric_kind and value_type might not be supported.

.google.api.MetricDescriptor.ValueType value_type = 4;

Parameter
NameDescription
valueMetricDescriptor.ValueType

The valueType to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.

setValueTypeValue(int value)

public MetricDescriptor.Builder setValueTypeValue(int value)

Whether the measurement is an integer, a floating-point number, etc. Some combinations of metric_kind and value_type might not be supported.

.google.api.MetricDescriptor.ValueType value_type = 4;

Parameter
NameDescription
valueint

The enum numeric value on the wire for valueType to set.

Returns
TypeDescription
MetricDescriptor.Builder

This builder for chaining.