- 3.53.0 (latest)
- 3.52.0
- 3.50.0
- 3.49.0
- 3.48.0
- 3.47.0
- 3.46.0
- 3.45.0
- 3.44.0
- 3.43.0
- 3.42.0
- 3.41.0
- 3.40.0
- 3.38.0
- 3.37.0
- 3.36.0
- 3.35.0
- 3.34.0
- 3.33.0
- 3.32.0
- 3.31.0
- 3.30.0
- 3.29.0
- 3.28.0
- 3.25.0
- 3.24.0
- 3.23.0
- 3.22.0
- 3.21.0
- 3.20.0
- 3.19.0
- 3.18.0
- 3.17.0
- 3.16.0
- 3.15.0
- 3.14.0
- 3.13.0
- 3.12.0
- 3.10.0
- 3.9.0
- 3.8.0
- 3.7.0
- 3.6.0
- 3.5.0
- 3.4.6
- 3.3.6
- 3.2.10
public static final class UptimeCheckIp.Builder extends GeneratedMessageV3.Builder<UptimeCheckIp.Builder> implements UptimeCheckIpOrBuilder
Contains the region, location, and list of IP addresses where checkers in the location run from.
Protobuf type google.monitoring.v3.UptimeCheckIp
Inheritance
Object > AbstractMessageLite.Builder<MessageType,BuilderType> > AbstractMessage.Builder<BuilderType> > GeneratedMessageV3.Builder > UptimeCheckIp.BuilderImplements
UptimeCheckIpOrBuilderStatic Methods
getDescriptor()
public static final Descriptors.Descriptor getDescriptor()
Returns | |
---|---|
Type | Description |
Descriptor |
Methods
addRepeatedField(Descriptors.FieldDescriptor field, Object value)
public UptimeCheckIp.Builder addRepeatedField(Descriptors.FieldDescriptor field, Object value)
Parameters | |
---|---|
Name | Description |
field |
FieldDescriptor |
value |
Object |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
build()
public UptimeCheckIp build()
Returns | |
---|---|
Type | Description |
UptimeCheckIp |
buildPartial()
public UptimeCheckIp buildPartial()
Returns | |
---|---|
Type | Description |
UptimeCheckIp |
clear()
public UptimeCheckIp.Builder clear()
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
clearField(Descriptors.FieldDescriptor field)
public UptimeCheckIp.Builder clearField(Descriptors.FieldDescriptor field)
Parameter | |
---|---|
Name | Description |
field |
FieldDescriptor |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
clearIpAddress()
public UptimeCheckIp.Builder clearIpAddress()
The IP address from which the Uptime check originates. This is a fully specified IP address (not an IP address range). Most IP addresses, as of this publication, are in IPv4 format; however, one should not rely on the IP addresses being in IPv4 format indefinitely, and should support interpreting this field in either IPv4 or IPv6 format.
string ip_address = 3;
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
This builder for chaining. |
clearLocation()
public UptimeCheckIp.Builder clearLocation()
A more specific location within the region that typically encodes a particular city/town/metro (and its containing state/province or country) within the broader umbrella region category.
string location = 2;
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
This builder for chaining. |
clearOneof(Descriptors.OneofDescriptor oneof)
public UptimeCheckIp.Builder clearOneof(Descriptors.OneofDescriptor oneof)
Parameter | |
---|---|
Name | Description |
oneof |
OneofDescriptor |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
clearRegion()
public UptimeCheckIp.Builder clearRegion()
A broad region category in which the IP address is located.
.google.monitoring.v3.UptimeCheckRegion region = 1;
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
This builder for chaining. |
clone()
public UptimeCheckIp.Builder clone()
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
getDefaultInstanceForType()
public UptimeCheckIp getDefaultInstanceForType()
Returns | |
---|---|
Type | Description |
UptimeCheckIp |
getDescriptorForType()
public Descriptors.Descriptor getDescriptorForType()
Returns | |
---|---|
Type | Description |
Descriptor |
getIpAddress()
public String getIpAddress()
The IP address from which the Uptime check originates. This is a fully specified IP address (not an IP address range). Most IP addresses, as of this publication, are in IPv4 format; however, one should not rely on the IP addresses being in IPv4 format indefinitely, and should support interpreting this field in either IPv4 or IPv6 format.
string ip_address = 3;
Returns | |
---|---|
Type | Description |
String |
The ipAddress. |
getIpAddressBytes()
public ByteString getIpAddressBytes()
The IP address from which the Uptime check originates. This is a fully specified IP address (not an IP address range). Most IP addresses, as of this publication, are in IPv4 format; however, one should not rely on the IP addresses being in IPv4 format indefinitely, and should support interpreting this field in either IPv4 or IPv6 format.
string ip_address = 3;
Returns | |
---|---|
Type | Description |
ByteString |
The bytes for ipAddress. |
getLocation()
public String getLocation()
A more specific location within the region that typically encodes a particular city/town/metro (and its containing state/province or country) within the broader umbrella region category.
string location = 2;
Returns | |
---|---|
Type | Description |
String |
The location. |
getLocationBytes()
public ByteString getLocationBytes()
A more specific location within the region that typically encodes a particular city/town/metro (and its containing state/province or country) within the broader umbrella region category.
string location = 2;
Returns | |
---|---|
Type | Description |
ByteString |
The bytes for location. |
getRegion()
public UptimeCheckRegion getRegion()
A broad region category in which the IP address is located.
.google.monitoring.v3.UptimeCheckRegion region = 1;
Returns | |
---|---|
Type | Description |
UptimeCheckRegion |
The region. |
getRegionValue()
public int getRegionValue()
A broad region category in which the IP address is located.
.google.monitoring.v3.UptimeCheckRegion region = 1;
Returns | |
---|---|
Type | Description |
int |
The enum numeric value on the wire for region. |
internalGetFieldAccessorTable()
protected GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
Returns | |
---|---|
Type | Description |
FieldAccessorTable |
isInitialized()
public final boolean isInitialized()
Returns | |
---|---|
Type | Description |
boolean |
mergeFrom(UptimeCheckIp other)
public UptimeCheckIp.Builder mergeFrom(UptimeCheckIp other)
Parameter | |
---|---|
Name | Description |
other |
UptimeCheckIp |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)
public UptimeCheckIp.Builder mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)
Parameters | |
---|---|
Name | Description |
input |
CodedInputStream |
extensionRegistry |
ExtensionRegistryLite |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
Exceptions | |
---|---|
Type | Description |
IOException |
mergeFrom(Message other)
public UptimeCheckIp.Builder mergeFrom(Message other)
Parameter | |
---|---|
Name | Description |
other |
Message |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
mergeUnknownFields(UnknownFieldSet unknownFields)
public final UptimeCheckIp.Builder mergeUnknownFields(UnknownFieldSet unknownFields)
Parameter | |
---|---|
Name | Description |
unknownFields |
UnknownFieldSet |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
setField(Descriptors.FieldDescriptor field, Object value)
public UptimeCheckIp.Builder setField(Descriptors.FieldDescriptor field, Object value)
Parameters | |
---|---|
Name | Description |
field |
FieldDescriptor |
value |
Object |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
setIpAddress(String value)
public UptimeCheckIp.Builder setIpAddress(String value)
The IP address from which the Uptime check originates. This is a fully specified IP address (not an IP address range). Most IP addresses, as of this publication, are in IPv4 format; however, one should not rely on the IP addresses being in IPv4 format indefinitely, and should support interpreting this field in either IPv4 or IPv6 format.
string ip_address = 3;
Parameter | |
---|---|
Name | Description |
value |
String The ipAddress to set. |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
This builder for chaining. |
setIpAddressBytes(ByteString value)
public UptimeCheckIp.Builder setIpAddressBytes(ByteString value)
The IP address from which the Uptime check originates. This is a fully specified IP address (not an IP address range). Most IP addresses, as of this publication, are in IPv4 format; however, one should not rely on the IP addresses being in IPv4 format indefinitely, and should support interpreting this field in either IPv4 or IPv6 format.
string ip_address = 3;
Parameter | |
---|---|
Name | Description |
value |
ByteString The bytes for ipAddress to set. |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
This builder for chaining. |
setLocation(String value)
public UptimeCheckIp.Builder setLocation(String value)
A more specific location within the region that typically encodes a particular city/town/metro (and its containing state/province or country) within the broader umbrella region category.
string location = 2;
Parameter | |
---|---|
Name | Description |
value |
String The location to set. |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
This builder for chaining. |
setLocationBytes(ByteString value)
public UptimeCheckIp.Builder setLocationBytes(ByteString value)
A more specific location within the region that typically encodes a particular city/town/metro (and its containing state/province or country) within the broader umbrella region category.
string location = 2;
Parameter | |
---|---|
Name | Description |
value |
ByteString The bytes for location to set. |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
This builder for chaining. |
setRegion(UptimeCheckRegion value)
public UptimeCheckIp.Builder setRegion(UptimeCheckRegion value)
A broad region category in which the IP address is located.
.google.monitoring.v3.UptimeCheckRegion region = 1;
Parameter | |
---|---|
Name | Description |
value |
UptimeCheckRegion The region to set. |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
This builder for chaining. |
setRegionValue(int value)
public UptimeCheckIp.Builder setRegionValue(int value)
A broad region category in which the IP address is located.
.google.monitoring.v3.UptimeCheckRegion region = 1;
Parameter | |
---|---|
Name | Description |
value |
int The enum numeric value on the wire for region to set. |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
This builder for chaining. |
setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)
public UptimeCheckIp.Builder setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)
Parameters | |
---|---|
Name | Description |
field |
FieldDescriptor |
index |
int |
value |
Object |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |
setUnknownFields(UnknownFieldSet unknownFields)
public final UptimeCheckIp.Builder setUnknownFields(UnknownFieldSet unknownFields)
Parameter | |
---|---|
Name | Description |
unknownFields |
UnknownFieldSet |
Returns | |
---|---|
Type | Description |
UptimeCheckIp.Builder |