Class AlertPolicy.Condition.MetricThreshold.Builder (3.43.0)

public static final class AlertPolicy.Condition.MetricThreshold.Builder extends GeneratedMessageV3.Builder<AlertPolicy.Condition.MetricThreshold.Builder> implements AlertPolicy.Condition.MetricThresholdOrBuilder

A condition type that compares a collection of time series against a threshold.

Protobuf type google.monitoring.v3.AlertPolicy.Condition.MetricThreshold

Static Methods

getDescriptor()

public static final Descriptors.Descriptor getDescriptor()
Returns
Type Description
Descriptor

Methods

addAggregations(Aggregation value)

public AlertPolicy.Condition.MetricThreshold.Builder addAggregations(Aggregation value)

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Parameter
Name Description
value Aggregation
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

addAggregations(Aggregation.Builder builderForValue)

public AlertPolicy.Condition.MetricThreshold.Builder addAggregations(Aggregation.Builder builderForValue)

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Parameter
Name Description
builderForValue Aggregation.Builder
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

addAggregations(int index, Aggregation value)

public AlertPolicy.Condition.MetricThreshold.Builder addAggregations(int index, Aggregation value)

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Parameters
Name Description
index int
value Aggregation
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

addAggregations(int index, Aggregation.Builder builderForValue)

public AlertPolicy.Condition.MetricThreshold.Builder addAggregations(int index, Aggregation.Builder builderForValue)

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Parameters
Name Description
index int
builderForValue Aggregation.Builder
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

addAggregationsBuilder()

public Aggregation.Builder addAggregationsBuilder()

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Returns
Type Description
Aggregation.Builder

addAggregationsBuilder(int index)

public Aggregation.Builder addAggregationsBuilder(int index)

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Parameter
Name Description
index int
Returns
Type Description
Aggregation.Builder

addAllAggregations(Iterable<? extends Aggregation> values)

public AlertPolicy.Condition.MetricThreshold.Builder addAllAggregations(Iterable<? extends Aggregation> values)

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Parameter
Name Description
values Iterable<? extends com.google.monitoring.v3.Aggregation>
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

addAllDenominatorAggregations(Iterable<? extends Aggregation> values)

public AlertPolicy.Condition.MetricThreshold.Builder addAllDenominatorAggregations(Iterable<? extends Aggregation> values)

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Parameter
Name Description
values Iterable<? extends com.google.monitoring.v3.Aggregation>
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

addDenominatorAggregations(Aggregation value)

public AlertPolicy.Condition.MetricThreshold.Builder addDenominatorAggregations(Aggregation value)

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Parameter
Name Description
value Aggregation
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

addDenominatorAggregations(Aggregation.Builder builderForValue)

public AlertPolicy.Condition.MetricThreshold.Builder addDenominatorAggregations(Aggregation.Builder builderForValue)

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Parameter
Name Description
builderForValue Aggregation.Builder
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

addDenominatorAggregations(int index, Aggregation value)

public AlertPolicy.Condition.MetricThreshold.Builder addDenominatorAggregations(int index, Aggregation value)

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Parameters
Name Description
index int
value Aggregation
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

addDenominatorAggregations(int index, Aggregation.Builder builderForValue)

public AlertPolicy.Condition.MetricThreshold.Builder addDenominatorAggregations(int index, Aggregation.Builder builderForValue)

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Parameters
Name Description
index int
builderForValue Aggregation.Builder
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

addDenominatorAggregationsBuilder()

public Aggregation.Builder addDenominatorAggregationsBuilder()

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Returns
Type Description
Aggregation.Builder

addDenominatorAggregationsBuilder(int index)

public Aggregation.Builder addDenominatorAggregationsBuilder(int index)

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Parameter
Name Description
index int
Returns
Type Description
Aggregation.Builder

addRepeatedField(Descriptors.FieldDescriptor field, Object value)

public AlertPolicy.Condition.MetricThreshold.Builder addRepeatedField(Descriptors.FieldDescriptor field, Object value)
Parameters
Name Description
field FieldDescriptor
value Object
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder
Overrides

build()

public AlertPolicy.Condition.MetricThreshold build()
Returns
Type Description
AlertPolicy.Condition.MetricThreshold

buildPartial()

public AlertPolicy.Condition.MetricThreshold buildPartial()
Returns
Type Description
AlertPolicy.Condition.MetricThreshold

clear()

public AlertPolicy.Condition.MetricThreshold.Builder clear()
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder
Overrides

clearAggregations()

public AlertPolicy.Condition.MetricThreshold.Builder clearAggregations()

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

clearComparison()

public AlertPolicy.Condition.MetricThreshold.Builder clearComparison()

The comparison to apply between the time series (indicated by filter and aggregation) and the threshold (indicated by threshold_value). The comparison is applied on each time series, with the time series on the left-hand side and the threshold on the right-hand side.

Only COMPARISON_LT and COMPARISON_GT are supported currently.

.google.monitoring.v3.ComparisonType comparison = 4;

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

clearDenominatorAggregations()

public AlertPolicy.Condition.MetricThreshold.Builder clearDenominatorAggregations()

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

clearDenominatorFilter()

public AlertPolicy.Condition.MetricThreshold.Builder clearDenominatorFilter()

A filter that identifies a time series that should be used as the denominator of a ratio that will be compared with the threshold. If a denominator_filter is specified, the time series specified by the filter field will be used as the numerator.

The filter must specify the metric type and optionally may contain restrictions on resource type, resource labels, and metric labels. This field may not exceed 2048 Unicode characters in length.

string denominator_filter = 9;

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

clearDuration()

public AlertPolicy.Condition.MetricThreshold.Builder clearDuration()

The amount of time that a time series must violate the threshold to be considered failing. Currently, only values that are a multiple of a minute--e.g., 0, 60, 120, or 300 seconds--are supported. If an invalid value is given, an error will be returned. When choosing a duration, it is useful to keep in mind the frequency of the underlying time series data (which may also be affected by any alignments specified in the aggregations field); a good duration is long enough so that a single outlier does not generate spurious alerts, but short enough that unhealthy states are detected and alerted on quickly.

.google.protobuf.Duration duration = 6;

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

clearEvaluationMissingData()

public AlertPolicy.Condition.MetricThreshold.Builder clearEvaluationMissingData()

A condition control that determines how metric-threshold conditions are evaluated when data stops arriving. To use this control, the value of the duration field must be greater than or equal to 60 seconds.

.google.monitoring.v3.AlertPolicy.Condition.EvaluationMissingData evaluation_missing_data = 11;

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

clearField(Descriptors.FieldDescriptor field)

public AlertPolicy.Condition.MetricThreshold.Builder clearField(Descriptors.FieldDescriptor field)
Parameter
Name Description
field FieldDescriptor
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder
Overrides

clearFilter()

public AlertPolicy.Condition.MetricThreshold.Builder clearFilter()

Required. A filter that identifies which time series should be compared with the threshold.

The filter is similar to the one that is specified in the ListTimeSeries request (that call is useful to verify the time series that will be retrieved / processed). The filter must specify the metric type and the resource type. Optionally, it can specify resource labels and metric labels. This field must not exceed 2048 Unicode characters in length.

string filter = 2 [(.google.api.field_behavior) = REQUIRED];

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

clearForecastOptions()

public AlertPolicy.Condition.MetricThreshold.Builder clearForecastOptions()

When this field is present, the MetricThreshold condition forecasts whether the time series is predicted to violate the threshold within the forecast_horizon. When this field is not set, the MetricThreshold tests the current value of the timeseries against the threshold.

.google.monitoring.v3.AlertPolicy.Condition.MetricThreshold.ForecastOptions forecast_options = 12;

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

clearOneof(Descriptors.OneofDescriptor oneof)

public AlertPolicy.Condition.MetricThreshold.Builder clearOneof(Descriptors.OneofDescriptor oneof)
Parameter
Name Description
oneof OneofDescriptor
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder
Overrides

clearThresholdValue()

public AlertPolicy.Condition.MetricThreshold.Builder clearThresholdValue()

A value against which to compare the time series.

double threshold_value = 5;

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

clearTrigger()

public AlertPolicy.Condition.MetricThreshold.Builder clearTrigger()

The number/percent of time series for which the comparison must hold in order for the condition to trigger. If unspecified, then the condition will trigger if the comparison is true for any of the time series that have been identified by filter and aggregations, or by the ratio, if denominator_filter and denominator_aggregations are specified.

.google.monitoring.v3.AlertPolicy.Condition.Trigger trigger = 7;

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

clone()

public AlertPolicy.Condition.MetricThreshold.Builder clone()
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder
Overrides

getAggregations(int index)

public Aggregation getAggregations(int index)

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Parameter
Name Description
index int
Returns
Type Description
Aggregation

getAggregationsBuilder(int index)

public Aggregation.Builder getAggregationsBuilder(int index)

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Parameter
Name Description
index int
Returns
Type Description
Aggregation.Builder

getAggregationsBuilderList()

public List<Aggregation.Builder> getAggregationsBuilderList()

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Returns
Type Description
List<Builder>

getAggregationsCount()

public int getAggregationsCount()

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Returns
Type Description
int

getAggregationsList()

public List<Aggregation> getAggregationsList()

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Returns
Type Description
List<Aggregation>

getAggregationsOrBuilder(int index)

public AggregationOrBuilder getAggregationsOrBuilder(int index)

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Parameter
Name Description
index int
Returns
Type Description
AggregationOrBuilder

getAggregationsOrBuilderList()

public List<? extends AggregationOrBuilder> getAggregationsOrBuilderList()

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Returns
Type Description
List<? extends com.google.monitoring.v3.AggregationOrBuilder>

getComparison()

public ComparisonType getComparison()

The comparison to apply between the time series (indicated by filter and aggregation) and the threshold (indicated by threshold_value). The comparison is applied on each time series, with the time series on the left-hand side and the threshold on the right-hand side.

Only COMPARISON_LT and COMPARISON_GT are supported currently.

.google.monitoring.v3.ComparisonType comparison = 4;

Returns
Type Description
ComparisonType

The comparison.

getComparisonValue()

public int getComparisonValue()

The comparison to apply between the time series (indicated by filter and aggregation) and the threshold (indicated by threshold_value). The comparison is applied on each time series, with the time series on the left-hand side and the threshold on the right-hand side.

Only COMPARISON_LT and COMPARISON_GT are supported currently.

.google.monitoring.v3.ComparisonType comparison = 4;

Returns
Type Description
int

The enum numeric value on the wire for comparison.

getDefaultInstanceForType()

public AlertPolicy.Condition.MetricThreshold getDefaultInstanceForType()
Returns
Type Description
AlertPolicy.Condition.MetricThreshold

getDenominatorAggregations(int index)

public Aggregation getDenominatorAggregations(int index)

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Parameter
Name Description
index int
Returns
Type Description
Aggregation

getDenominatorAggregationsBuilder(int index)

public Aggregation.Builder getDenominatorAggregationsBuilder(int index)

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Parameter
Name Description
index int
Returns
Type Description
Aggregation.Builder

getDenominatorAggregationsBuilderList()

public List<Aggregation.Builder> getDenominatorAggregationsBuilderList()

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Returns
Type Description
List<Builder>

getDenominatorAggregationsCount()

public int getDenominatorAggregationsCount()

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Returns
Type Description
int

getDenominatorAggregationsList()

public List<Aggregation> getDenominatorAggregationsList()

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Returns
Type Description
List<Aggregation>

getDenominatorAggregationsOrBuilder(int index)

public AggregationOrBuilder getDenominatorAggregationsOrBuilder(int index)

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Parameter
Name Description
index int
Returns
Type Description
AggregationOrBuilder

getDenominatorAggregationsOrBuilderList()

public List<? extends AggregationOrBuilder> getDenominatorAggregationsOrBuilderList()

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Returns
Type Description
List<? extends com.google.monitoring.v3.AggregationOrBuilder>

getDenominatorFilter()

public String getDenominatorFilter()

A filter that identifies a time series that should be used as the denominator of a ratio that will be compared with the threshold. If a denominator_filter is specified, the time series specified by the filter field will be used as the numerator.

The filter must specify the metric type and optionally may contain restrictions on resource type, resource labels, and metric labels. This field may not exceed 2048 Unicode characters in length.

string denominator_filter = 9;

Returns
Type Description
String

The denominatorFilter.

getDenominatorFilterBytes()

public ByteString getDenominatorFilterBytes()

A filter that identifies a time series that should be used as the denominator of a ratio that will be compared with the threshold. If a denominator_filter is specified, the time series specified by the filter field will be used as the numerator.

The filter must specify the metric type and optionally may contain restrictions on resource type, resource labels, and metric labels. This field may not exceed 2048 Unicode characters in length.

string denominator_filter = 9;

Returns
Type Description
ByteString

The bytes for denominatorFilter.

getDescriptorForType()

public Descriptors.Descriptor getDescriptorForType()
Returns
Type Description
Descriptor
Overrides

getDuration()

public Duration getDuration()

The amount of time that a time series must violate the threshold to be considered failing. Currently, only values that are a multiple of a minute--e.g., 0, 60, 120, or 300 seconds--are supported. If an invalid value is given, an error will be returned. When choosing a duration, it is useful to keep in mind the frequency of the underlying time series data (which may also be affected by any alignments specified in the aggregations field); a good duration is long enough so that a single outlier does not generate spurious alerts, but short enough that unhealthy states are detected and alerted on quickly.

.google.protobuf.Duration duration = 6;

Returns
Type Description
Duration

The duration.

getDurationBuilder()

public Duration.Builder getDurationBuilder()

The amount of time that a time series must violate the threshold to be considered failing. Currently, only values that are a multiple of a minute--e.g., 0, 60, 120, or 300 seconds--are supported. If an invalid value is given, an error will be returned. When choosing a duration, it is useful to keep in mind the frequency of the underlying time series data (which may also be affected by any alignments specified in the aggregations field); a good duration is long enough so that a single outlier does not generate spurious alerts, but short enough that unhealthy states are detected and alerted on quickly.

.google.protobuf.Duration duration = 6;

Returns
Type Description
Builder

getDurationOrBuilder()

public DurationOrBuilder getDurationOrBuilder()

The amount of time that a time series must violate the threshold to be considered failing. Currently, only values that are a multiple of a minute--e.g., 0, 60, 120, or 300 seconds--are supported. If an invalid value is given, an error will be returned. When choosing a duration, it is useful to keep in mind the frequency of the underlying time series data (which may also be affected by any alignments specified in the aggregations field); a good duration is long enough so that a single outlier does not generate spurious alerts, but short enough that unhealthy states are detected and alerted on quickly.

.google.protobuf.Duration duration = 6;

Returns
Type Description
DurationOrBuilder

getEvaluationMissingData()

public AlertPolicy.Condition.EvaluationMissingData getEvaluationMissingData()

A condition control that determines how metric-threshold conditions are evaluated when data stops arriving. To use this control, the value of the duration field must be greater than or equal to 60 seconds.

.google.monitoring.v3.AlertPolicy.Condition.EvaluationMissingData evaluation_missing_data = 11;

Returns
Type Description
AlertPolicy.Condition.EvaluationMissingData

The evaluationMissingData.

getEvaluationMissingDataValue()

public int getEvaluationMissingDataValue()

A condition control that determines how metric-threshold conditions are evaluated when data stops arriving. To use this control, the value of the duration field must be greater than or equal to 60 seconds.

.google.monitoring.v3.AlertPolicy.Condition.EvaluationMissingData evaluation_missing_data = 11;

Returns
Type Description
int

The enum numeric value on the wire for evaluationMissingData.

getFilter()

public String getFilter()

Required. A filter that identifies which time series should be compared with the threshold.

The filter is similar to the one that is specified in the ListTimeSeries request (that call is useful to verify the time series that will be retrieved / processed). The filter must specify the metric type and the resource type. Optionally, it can specify resource labels and metric labels. This field must not exceed 2048 Unicode characters in length.

string filter = 2 [(.google.api.field_behavior) = REQUIRED];

Returns
Type Description
String

The filter.

getFilterBytes()

public ByteString getFilterBytes()

Required. A filter that identifies which time series should be compared with the threshold.

The filter is similar to the one that is specified in the ListTimeSeries request (that call is useful to verify the time series that will be retrieved / processed). The filter must specify the metric type and the resource type. Optionally, it can specify resource labels and metric labels. This field must not exceed 2048 Unicode characters in length.

string filter = 2 [(.google.api.field_behavior) = REQUIRED];

Returns
Type Description
ByteString

The bytes for filter.

getForecastOptions()

public AlertPolicy.Condition.MetricThreshold.ForecastOptions getForecastOptions()

When this field is present, the MetricThreshold condition forecasts whether the time series is predicted to violate the threshold within the forecast_horizon. When this field is not set, the MetricThreshold tests the current value of the timeseries against the threshold.

.google.monitoring.v3.AlertPolicy.Condition.MetricThreshold.ForecastOptions forecast_options = 12;

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.ForecastOptions

The forecastOptions.

getForecastOptionsBuilder()

public AlertPolicy.Condition.MetricThreshold.ForecastOptions.Builder getForecastOptionsBuilder()

When this field is present, the MetricThreshold condition forecasts whether the time series is predicted to violate the threshold within the forecast_horizon. When this field is not set, the MetricThreshold tests the current value of the timeseries against the threshold.

.google.monitoring.v3.AlertPolicy.Condition.MetricThreshold.ForecastOptions forecast_options = 12;

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.ForecastOptions.Builder

getForecastOptionsOrBuilder()

public AlertPolicy.Condition.MetricThreshold.ForecastOptionsOrBuilder getForecastOptionsOrBuilder()

When this field is present, the MetricThreshold condition forecasts whether the time series is predicted to violate the threshold within the forecast_horizon. When this field is not set, the MetricThreshold tests the current value of the timeseries against the threshold.

.google.monitoring.v3.AlertPolicy.Condition.MetricThreshold.ForecastOptions forecast_options = 12;

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.ForecastOptionsOrBuilder

getThresholdValue()

public double getThresholdValue()

A value against which to compare the time series.

double threshold_value = 5;

Returns
Type Description
double

The thresholdValue.

getTrigger()

public AlertPolicy.Condition.Trigger getTrigger()

The number/percent of time series for which the comparison must hold in order for the condition to trigger. If unspecified, then the condition will trigger if the comparison is true for any of the time series that have been identified by filter and aggregations, or by the ratio, if denominator_filter and denominator_aggregations are specified.

.google.monitoring.v3.AlertPolicy.Condition.Trigger trigger = 7;

Returns
Type Description
AlertPolicy.Condition.Trigger

The trigger.

getTriggerBuilder()

public AlertPolicy.Condition.Trigger.Builder getTriggerBuilder()

The number/percent of time series for which the comparison must hold in order for the condition to trigger. If unspecified, then the condition will trigger if the comparison is true for any of the time series that have been identified by filter and aggregations, or by the ratio, if denominator_filter and denominator_aggregations are specified.

.google.monitoring.v3.AlertPolicy.Condition.Trigger trigger = 7;

Returns
Type Description
AlertPolicy.Condition.Trigger.Builder

getTriggerOrBuilder()

public AlertPolicy.Condition.TriggerOrBuilder getTriggerOrBuilder()

The number/percent of time series for which the comparison must hold in order for the condition to trigger. If unspecified, then the condition will trigger if the comparison is true for any of the time series that have been identified by filter and aggregations, or by the ratio, if denominator_filter and denominator_aggregations are specified.

.google.monitoring.v3.AlertPolicy.Condition.Trigger trigger = 7;

Returns
Type Description
AlertPolicy.Condition.TriggerOrBuilder

hasDuration()

public boolean hasDuration()

The amount of time that a time series must violate the threshold to be considered failing. Currently, only values that are a multiple of a minute--e.g., 0, 60, 120, or 300 seconds--are supported. If an invalid value is given, an error will be returned. When choosing a duration, it is useful to keep in mind the frequency of the underlying time series data (which may also be affected by any alignments specified in the aggregations field); a good duration is long enough so that a single outlier does not generate spurious alerts, but short enough that unhealthy states are detected and alerted on quickly.

.google.protobuf.Duration duration = 6;

Returns
Type Description
boolean

Whether the duration field is set.

hasForecastOptions()

public boolean hasForecastOptions()

When this field is present, the MetricThreshold condition forecasts whether the time series is predicted to violate the threshold within the forecast_horizon. When this field is not set, the MetricThreshold tests the current value of the timeseries against the threshold.

.google.monitoring.v3.AlertPolicy.Condition.MetricThreshold.ForecastOptions forecast_options = 12;

Returns
Type Description
boolean

Whether the forecastOptions field is set.

hasTrigger()

public boolean hasTrigger()

The number/percent of time series for which the comparison must hold in order for the condition to trigger. If unspecified, then the condition will trigger if the comparison is true for any of the time series that have been identified by filter and aggregations, or by the ratio, if denominator_filter and denominator_aggregations are specified.

.google.monitoring.v3.AlertPolicy.Condition.Trigger trigger = 7;

Returns
Type Description
boolean

Whether the trigger field is set.

internalGetFieldAccessorTable()

protected GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
Returns
Type Description
FieldAccessorTable
Overrides

isInitialized()

public final boolean isInitialized()
Returns
Type Description
boolean
Overrides

mergeDuration(Duration value)

public AlertPolicy.Condition.MetricThreshold.Builder mergeDuration(Duration value)

The amount of time that a time series must violate the threshold to be considered failing. Currently, only values that are a multiple of a minute--e.g., 0, 60, 120, or 300 seconds--are supported. If an invalid value is given, an error will be returned. When choosing a duration, it is useful to keep in mind the frequency of the underlying time series data (which may also be affected by any alignments specified in the aggregations field); a good duration is long enough so that a single outlier does not generate spurious alerts, but short enough that unhealthy states are detected and alerted on quickly.

.google.protobuf.Duration duration = 6;

Parameter
Name Description
value Duration
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

mergeForecastOptions(AlertPolicy.Condition.MetricThreshold.ForecastOptions value)

public AlertPolicy.Condition.MetricThreshold.Builder mergeForecastOptions(AlertPolicy.Condition.MetricThreshold.ForecastOptions value)

When this field is present, the MetricThreshold condition forecasts whether the time series is predicted to violate the threshold within the forecast_horizon. When this field is not set, the MetricThreshold tests the current value of the timeseries against the threshold.

.google.monitoring.v3.AlertPolicy.Condition.MetricThreshold.ForecastOptions forecast_options = 12;

Parameter
Name Description
value AlertPolicy.Condition.MetricThreshold.ForecastOptions
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

mergeFrom(AlertPolicy.Condition.MetricThreshold other)

public AlertPolicy.Condition.MetricThreshold.Builder mergeFrom(AlertPolicy.Condition.MetricThreshold other)
Parameter
Name Description
other AlertPolicy.Condition.MetricThreshold
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

public AlertPolicy.Condition.MetricThreshold.Builder mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)
Parameters
Name Description
input CodedInputStream
extensionRegistry ExtensionRegistryLite
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder
Overrides
Exceptions
Type Description
IOException

mergeFrom(Message other)

public AlertPolicy.Condition.MetricThreshold.Builder mergeFrom(Message other)
Parameter
Name Description
other Message
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder
Overrides

mergeTrigger(AlertPolicy.Condition.Trigger value)

public AlertPolicy.Condition.MetricThreshold.Builder mergeTrigger(AlertPolicy.Condition.Trigger value)

The number/percent of time series for which the comparison must hold in order for the condition to trigger. If unspecified, then the condition will trigger if the comparison is true for any of the time series that have been identified by filter and aggregations, or by the ratio, if denominator_filter and denominator_aggregations are specified.

.google.monitoring.v3.AlertPolicy.Condition.Trigger trigger = 7;

Parameter
Name Description
value AlertPolicy.Condition.Trigger
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

mergeUnknownFields(UnknownFieldSet unknownFields)

public final AlertPolicy.Condition.MetricThreshold.Builder mergeUnknownFields(UnknownFieldSet unknownFields)
Parameter
Name Description
unknownFields UnknownFieldSet
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder
Overrides

removeAggregations(int index)

public AlertPolicy.Condition.MetricThreshold.Builder removeAggregations(int index)

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Parameter
Name Description
index int
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

removeDenominatorAggregations(int index)

public AlertPolicy.Condition.MetricThreshold.Builder removeDenominatorAggregations(int index)

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Parameter
Name Description
index int
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

setAggregations(int index, Aggregation value)

public AlertPolicy.Condition.MetricThreshold.Builder setAggregations(int index, Aggregation value)

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Parameters
Name Description
index int
value Aggregation
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

setAggregations(int index, Aggregation.Builder builderForValue)

public AlertPolicy.Condition.MetricThreshold.Builder setAggregations(int index, Aggregation.Builder builderForValue)

Specifies the alignment of data points in individual time series as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources). Multiple aggregations are applied in the order specified.

This field is similar to the one in the ListTimeSeries request. It is advisable to use the ListTimeSeries method when debugging this field.

repeated .google.monitoring.v3.Aggregation aggregations = 8;

Parameters
Name Description
index int
builderForValue Aggregation.Builder
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

setComparison(ComparisonType value)

public AlertPolicy.Condition.MetricThreshold.Builder setComparison(ComparisonType value)

The comparison to apply between the time series (indicated by filter and aggregation) and the threshold (indicated by threshold_value). The comparison is applied on each time series, with the time series on the left-hand side and the threshold on the right-hand side.

Only COMPARISON_LT and COMPARISON_GT are supported currently.

.google.monitoring.v3.ComparisonType comparison = 4;

Parameter
Name Description
value ComparisonType

The comparison to set.

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

setComparisonValue(int value)

public AlertPolicy.Condition.MetricThreshold.Builder setComparisonValue(int value)

The comparison to apply between the time series (indicated by filter and aggregation) and the threshold (indicated by threshold_value). The comparison is applied on each time series, with the time series on the left-hand side and the threshold on the right-hand side.

Only COMPARISON_LT and COMPARISON_GT are supported currently.

.google.monitoring.v3.ComparisonType comparison = 4;

Parameter
Name Description
value int

The enum numeric value on the wire for comparison to set.

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

setDenominatorAggregations(int index, Aggregation value)

public AlertPolicy.Condition.MetricThreshold.Builder setDenominatorAggregations(int index, Aggregation value)

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Parameters
Name Description
index int
value Aggregation
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

setDenominatorAggregations(int index, Aggregation.Builder builderForValue)

public AlertPolicy.Condition.MetricThreshold.Builder setDenominatorAggregations(int index, Aggregation.Builder builderForValue)

Specifies the alignment of data points in individual time series selected by denominatorFilter as well as how to combine the retrieved time series together (such as when aggregating multiple streams on each resource to a single stream for each resource or when aggregating streams across all members of a group of resources).

When computing ratios, the aggregations and denominator_aggregations fields must use the same alignment period and produce time series that have the same periodicity and labels.

repeated .google.monitoring.v3.Aggregation denominator_aggregations = 10;

Parameters
Name Description
index int
builderForValue Aggregation.Builder
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

setDenominatorFilter(String value)

public AlertPolicy.Condition.MetricThreshold.Builder setDenominatorFilter(String value)

A filter that identifies a time series that should be used as the denominator of a ratio that will be compared with the threshold. If a denominator_filter is specified, the time series specified by the filter field will be used as the numerator.

The filter must specify the metric type and optionally may contain restrictions on resource type, resource labels, and metric labels. This field may not exceed 2048 Unicode characters in length.

string denominator_filter = 9;

Parameter
Name Description
value String

The denominatorFilter to set.

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

setDenominatorFilterBytes(ByteString value)

public AlertPolicy.Condition.MetricThreshold.Builder setDenominatorFilterBytes(ByteString value)

A filter that identifies a time series that should be used as the denominator of a ratio that will be compared with the threshold. If a denominator_filter is specified, the time series specified by the filter field will be used as the numerator.

The filter must specify the metric type and optionally may contain restrictions on resource type, resource labels, and metric labels. This field may not exceed 2048 Unicode characters in length.

string denominator_filter = 9;

Parameter
Name Description
value ByteString

The bytes for denominatorFilter to set.

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

setDuration(Duration value)

public AlertPolicy.Condition.MetricThreshold.Builder setDuration(Duration value)

The amount of time that a time series must violate the threshold to be considered failing. Currently, only values that are a multiple of a minute--e.g., 0, 60, 120, or 300 seconds--are supported. If an invalid value is given, an error will be returned. When choosing a duration, it is useful to keep in mind the frequency of the underlying time series data (which may also be affected by any alignments specified in the aggregations field); a good duration is long enough so that a single outlier does not generate spurious alerts, but short enough that unhealthy states are detected and alerted on quickly.

.google.protobuf.Duration duration = 6;

Parameter
Name Description
value Duration
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

setDuration(Duration.Builder builderForValue)

public AlertPolicy.Condition.MetricThreshold.Builder setDuration(Duration.Builder builderForValue)

The amount of time that a time series must violate the threshold to be considered failing. Currently, only values that are a multiple of a minute--e.g., 0, 60, 120, or 300 seconds--are supported. If an invalid value is given, an error will be returned. When choosing a duration, it is useful to keep in mind the frequency of the underlying time series data (which may also be affected by any alignments specified in the aggregations field); a good duration is long enough so that a single outlier does not generate spurious alerts, but short enough that unhealthy states are detected and alerted on quickly.

.google.protobuf.Duration duration = 6;

Parameter
Name Description
builderForValue Builder
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

setEvaluationMissingData(AlertPolicy.Condition.EvaluationMissingData value)

public AlertPolicy.Condition.MetricThreshold.Builder setEvaluationMissingData(AlertPolicy.Condition.EvaluationMissingData value)

A condition control that determines how metric-threshold conditions are evaluated when data stops arriving. To use this control, the value of the duration field must be greater than or equal to 60 seconds.

.google.monitoring.v3.AlertPolicy.Condition.EvaluationMissingData evaluation_missing_data = 11;

Parameter
Name Description
value AlertPolicy.Condition.EvaluationMissingData

The evaluationMissingData to set.

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

setEvaluationMissingDataValue(int value)

public AlertPolicy.Condition.MetricThreshold.Builder setEvaluationMissingDataValue(int value)

A condition control that determines how metric-threshold conditions are evaluated when data stops arriving. To use this control, the value of the duration field must be greater than or equal to 60 seconds.

.google.monitoring.v3.AlertPolicy.Condition.EvaluationMissingData evaluation_missing_data = 11;

Parameter
Name Description
value int

The enum numeric value on the wire for evaluationMissingData to set.

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

setField(Descriptors.FieldDescriptor field, Object value)

public AlertPolicy.Condition.MetricThreshold.Builder setField(Descriptors.FieldDescriptor field, Object value)
Parameters
Name Description
field FieldDescriptor
value Object
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder
Overrides

setFilter(String value)

public AlertPolicy.Condition.MetricThreshold.Builder setFilter(String value)

Required. A filter that identifies which time series should be compared with the threshold.

The filter is similar to the one that is specified in the ListTimeSeries request (that call is useful to verify the time series that will be retrieved / processed). The filter must specify the metric type and the resource type. Optionally, it can specify resource labels and metric labels. This field must not exceed 2048 Unicode characters in length.

string filter = 2 [(.google.api.field_behavior) = REQUIRED];

Parameter
Name Description
value String

The filter to set.

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

setFilterBytes(ByteString value)

public AlertPolicy.Condition.MetricThreshold.Builder setFilterBytes(ByteString value)

Required. A filter that identifies which time series should be compared with the threshold.

The filter is similar to the one that is specified in the ListTimeSeries request (that call is useful to verify the time series that will be retrieved / processed). The filter must specify the metric type and the resource type. Optionally, it can specify resource labels and metric labels. This field must not exceed 2048 Unicode characters in length.

string filter = 2 [(.google.api.field_behavior) = REQUIRED];

Parameter
Name Description
value ByteString

The bytes for filter to set.

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

setForecastOptions(AlertPolicy.Condition.MetricThreshold.ForecastOptions value)

public AlertPolicy.Condition.MetricThreshold.Builder setForecastOptions(AlertPolicy.Condition.MetricThreshold.ForecastOptions value)

When this field is present, the MetricThreshold condition forecasts whether the time series is predicted to violate the threshold within the forecast_horizon. When this field is not set, the MetricThreshold tests the current value of the timeseries against the threshold.

.google.monitoring.v3.AlertPolicy.Condition.MetricThreshold.ForecastOptions forecast_options = 12;

Parameter
Name Description
value AlertPolicy.Condition.MetricThreshold.ForecastOptions
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

setForecastOptions(AlertPolicy.Condition.MetricThreshold.ForecastOptions.Builder builderForValue)

public AlertPolicy.Condition.MetricThreshold.Builder setForecastOptions(AlertPolicy.Condition.MetricThreshold.ForecastOptions.Builder builderForValue)

When this field is present, the MetricThreshold condition forecasts whether the time series is predicted to violate the threshold within the forecast_horizon. When this field is not set, the MetricThreshold tests the current value of the timeseries against the threshold.

.google.monitoring.v3.AlertPolicy.Condition.MetricThreshold.ForecastOptions forecast_options = 12;

Parameter
Name Description
builderForValue AlertPolicy.Condition.MetricThreshold.ForecastOptions.Builder
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

public AlertPolicy.Condition.MetricThreshold.Builder setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)
Parameters
Name Description
field FieldDescriptor
index int
value Object
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder
Overrides

setThresholdValue(double value)

public AlertPolicy.Condition.MetricThreshold.Builder setThresholdValue(double value)

A value against which to compare the time series.

double threshold_value = 5;

Parameter
Name Description
value double

The thresholdValue to set.

Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

This builder for chaining.

setTrigger(AlertPolicy.Condition.Trigger value)

public AlertPolicy.Condition.MetricThreshold.Builder setTrigger(AlertPolicy.Condition.Trigger value)

The number/percent of time series for which the comparison must hold in order for the condition to trigger. If unspecified, then the condition will trigger if the comparison is true for any of the time series that have been identified by filter and aggregations, or by the ratio, if denominator_filter and denominator_aggregations are specified.

.google.monitoring.v3.AlertPolicy.Condition.Trigger trigger = 7;

Parameter
Name Description
value AlertPolicy.Condition.Trigger
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

setTrigger(AlertPolicy.Condition.Trigger.Builder builderForValue)

public AlertPolicy.Condition.MetricThreshold.Builder setTrigger(AlertPolicy.Condition.Trigger.Builder builderForValue)

The number/percent of time series for which the comparison must hold in order for the condition to trigger. If unspecified, then the condition will trigger if the comparison is true for any of the time series that have been identified by filter and aggregations, or by the ratio, if denominator_filter and denominator_aggregations are specified.

.google.monitoring.v3.AlertPolicy.Condition.Trigger trigger = 7;

Parameter
Name Description
builderForValue AlertPolicy.Condition.Trigger.Builder
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder

setUnknownFields(UnknownFieldSet unknownFields)

public final AlertPolicy.Condition.MetricThreshold.Builder setUnknownFields(UnknownFieldSet unknownFields)
Parameter
Name Description
unknownFields UnknownFieldSet
Returns
Type Description
AlertPolicy.Condition.MetricThreshold.Builder
Overrides