public class EnhancedBigtableStubSettings extends StubSettings<EnhancedBigtableStubSettings>Settings class to configure an instance of EnhancedBigtableStub.
Sane defaults are provided for most settings:
- The default service address (bigtable.googleapis.com) and default port (443) are used.
- Credentials are acquired automatically through Application Default Credentials.
- Retries are configured for idempotent methods but not for non-idempotent methods.
The only required setting is the instance name.
The builder of this class is recursive, so contained classes are themselves builders. When build() is called, the tree of builders is called to create the complete settings object.
BigtableDataSettings.Builder settingsBuilder = BigtableDataSettings.newBuilder()
.setProjectId("my-project-id")
.setInstanceId("my-instance-id")
.setAppProfileId("default");
settingsBuilder.readRowsSettings()
.setRetryableCodes(Code.DEADLINE_EXCEEDED, Code.UNAVAILABLE);
BigtableDataSettings settings = builder.build();
Static Methods
defaultCredentialsProviderBuilder()
public static GoogleCredentialsProvider.Builder defaultCredentialsProviderBuilder()Returns a builder for the default credentials for this service.
| Type | Description |
| Builder |
defaultGrpcTransportProviderBuilder()
public static InstantiatingGrpcChannelProvider.Builder defaultGrpcTransportProviderBuilder()Returns a builder for the default ChannelProvider for this service.
| Type | Description |
| Builder |
defaultTransportChannelProvider()
public static TransportChannelProvider defaultTransportChannelProvider()| Type | Description |
| TransportChannelProvider |
newBuilder()
public static EnhancedBigtableStubSettings.Builder newBuilder()Create a new builder.
| Type | Description |
| EnhancedBigtableStubSettings.Builder |
Methods
bulkMutateRowsSettings()
public BigtableBatchingCallSettings bulkMutateRowsSettings()Returns the object with the settings used for calls to MutateRows.
Please note that these settings will affect both manually batched calls (bulkMutateRowsCallable) and automatic batched calls (bulkMutateRowsBatchingCallable). The RowMutation request signature is ignored for the manual batched calls.
Default retry and timeout settings:
- Retry error codes are: Code#DEADLINE_EXCEEDED and Code#UNAVAILABLE.
- RetryDelay between failed attempts starts at 10ms and increases exponentially by a factor of 2 until a maximum of 1 minute.
- The default timeout for each attempt is 1 minute and the timeout for the entire operation across all of the attempts is 10 mins.
On breach of certain triggers, the operation initiates processing of accumulated request for which the default settings are:
- When the request count reaches 100.
- When accumulated request size reaches to 20MB.
- When an interval of 1 second passes after batching initialization or last processed batch.
A FlowController will be set up with #getDynamicFlowControlSettings() for throttling in-flight requests. When the pending request count or accumulated request size reaches FlowController thresholds, then this operation will be throttled until some of the pending batches are resolved. See Also: RetrySettingsfor more explanation., BatchingSettingsfor batch related configuration explanation., BigtableBatchingCallSettings.Builder#getDynamicFlowControlSettings()for flow control related configuration explanation.
| Type | Description |
| BigtableBatchingCallSettings |
bulkReadRowsSettings()
public BigtableBulkReadRowsCallSettings bulkReadRowsSettings()Returns the call settings used for bulk read rows.
Default retry and timeout settings:
- Retry error codes are: Code#DEADLINE_EXCEEDED, Code#UNAVAILABLE and Code#ABORTED.
- RetryDelay between failed attempts starts at 10ms and increases exponentially by a factor of 2 until a maximum of 1 minute.
- The default timeout for each attempt is 5 minute and the timeout for the entire operation across all of the attempts is 10 mins.
On breach of certain triggers, the operation initiates processing of accumulated request for which the default settings are:
- When the request count reaches 100.
- When accumulated request size reaches to 400KB.
- When an interval of 1 second passes after batching initialization or last processed batch.
When the pending request count reaches a default of 1000 outstanding row keys per channel then this operation will by default be blocked until some of the pending batch are resolved. See Also: RetrySettingsfor more explanation., BatchingSettingsfor batch related configuration explanation.
| Type | Description |
| BigtableBulkReadRowsCallSettings |
checkAndMutateRowSettings()
public UnaryCallSettings<ConditionalRowMutation,Boolean> checkAndMutateRowSettings()Returns the object with the settings used for calls to CheckAndMutateRow.
This is a non-idempotent and non-streaming operation.
By default this operation does not reattempt in case of RPC failure. The default timeout for the entire operation is 20 seconds. See Also: RetrySettingsfor more explanation.
| Type | Description |
| UnaryCallSettings<ConditionalRowMutation,Boolean> |
getAppProfileId()
public String getAppProfileId()Returns the configured AppProfile to use
| Type | Description |
| String |
getInstanceId()
public String getInstanceId()Returns the target instance id.
| Type | Description |
| String |
getJwtAudienceMapping()
public Map<String,String> getJwtAudienceMapping()| Type | Description |
| Map<String,String> |
getPrimedTableIds()
public List<String> getPrimedTableIds()Gets the tables that will be primed during a channel refresh.
| Type | Description |
| List<String> |
getProjectId()
public String getProjectId()Returns the project id of the target instance.
| Type | Description |
| String |
isRefreshingChannel()
public boolean isRefreshingChannel()Returns if channels will gracefully refresh connections to Cloud Bigtable service
| Type | Description |
| boolean |
mutateRowSettings()
public UnaryCallSettings<RowMutation,Void> mutateRowSettings()Returns the object with the settings used for calls to MutateRow.
This is an idempotent and non-streaming operation.
Default retry and timeout settings:
- Retry error codes are: Code#DEADLINE_EXCEEDED and Code#UNAVAILABLE.
- RetryDelay between failed attempts starts at 10ms and increases exponentially by a factor of 2 until a maximum of 60 seconds.
- The default timeout for each attempt is 20 seconds and the timeout for the entire operation across all of the attempts is 10 mins.
| Type | Description |
| UnaryCallSettings<RowMutation,Void> |
readModifyWriteRowSettings()
public UnaryCallSettings<ReadModifyWriteRow,Row> readModifyWriteRowSettings()Returns the object with the settings used for calls to ReadModifyWriteRow.
This is a non-idempotent and non-streaming operation.
By default this operation does not reattempt in case of RPC failure. The default timeout for the entire operation is 20 seconds. See Also: RetrySettingsfor more explanation.
| Type | Description |
| UnaryCallSettings<ReadModifyWriteRow,Row> |
readRowSettings()
public UnaryCallSettings<Query,Row> readRowSettings()Returns the object with the settings used for point reads via ReadRows.
This is an idempotent and non-streaming operation.
Default retry and timeout settings:
- Retry error codes are: Code#DEADLINE_EXCEEDED, Code#UNAVAILABLE and Code#ABORTED.
- RetryDelay between failed attempts starts at 10ms and increases exponentially by a factor of 2 until a maximum of 1 minute.
- The default timeout for each attempt is 20 seconds and the timeout for the entire operation across all of the attempts is 10 mins.
| Type | Description |
| UnaryCallSettings<Query,Row> |
readRowsSettings()
public ServerStreamingCallSettings<Query,Row> readRowsSettings()Returns the object with the settings used for calls to ReadRows.
This is idempotent and streaming operation.
Default retry and timeout settings:
- Default idle timeout is set to 5 mins.
- Retry error codes are: Code#DEADLINE_EXCEEDED, Code#UNAVAILABLE and Code#ABORTED.
- RetryDelay between failed attempts starts at 10ms and increases exponentially by a factor of 2 until a maximum of 1 minute.
- The default read timeout for each row in a response stream is 5 minutes with maximum attempt count of 10 times and the timeout to read the entire stream is 12 hours.
| Type | Description |
| ServerStreamingCallSettings<Query,Row> |
sampleRowKeysSettings()
public UnaryCallSettings<String,List<KeyOffset>> sampleRowKeysSettings()Returns the object with the settings used for calls to SampleRowKeys.
This is idempotent and non-streaming operation.
Default retry and timeout settings:
- Retry error codes are: Code#DEADLINE_EXCEEDED and Code#UNAVAILABLE.
- RetryDelay between failed attempts starts at 10ms and increases exponentially by a factor of 2 until a maximum of 1 minute.
- The default timeout for each attempt is 20 seconds and the timeout for the entire operation across all of the attempts is 10 mins.
| Type | Description |
| UnaryCallSettings<String,List<KeyOffset>> |
toBuilder()
public EnhancedBigtableStubSettings.Builder toBuilder()Returns a builder containing all the values of this settings class.
| Type | Description |
| EnhancedBigtableStubSettings.Builder |
toString()
public String toString()| Type | Description |
| String |