OneDrive

The Onedrive connector lets you perform insert, delete, update, and read operations on OneDrive.

Before you begin

Before using the OneDrive connector, do the following tasks:

  • In your Google Cloud project:
    • Ensure that network connectivity is set up. For information about network patterns, see Network connectivity.
    • Grant the roles/connectors.admin IAM role to the user configuring the connector.
    • Grant the following IAM roles to the service account that you want to use for the connector:
      • roles/secretmanager.viewer
      • roles/secretmanager.secretAccessor

      A service account is a special type of Google account intended to represent a non-human user that needs to authenticate and be authorized to access data in Google APIs. If you don't have a service account, you must create a service account. For more information, see Creating a service account.

    • Enable the following services:
      • secretmanager.googleapis.com (Secret Manager API)
      • connectors.googleapis.com (Connectors API)

      To understand how to enable services, see Enabling services.

    If these services or permissions have not been enabled for your project previously, you are prompted to enable them when configuring the connector.

Configure the connector

Configuring the connector requires you to create a connection to your data source (backend system). A connection is specific to a data source. It means that if you have many data sources, you must create a separate connection for each data source. To create a connection, do the following steps:

  1. In the Cloud console, go to the Integration Connectors > Connections page and then select or create a Google Cloud project.

    Go to the Connections page

  2. Click + CREATE NEW to open the Create Connection page.
  3. In the Location section, choose the location for the connection.
    1. Region: Select a location from the drop-down list.

      For the list of all the supported regions, see Locations.

    2. Click NEXT.
  4. In the Connection Details section, complete the following:
    1. Connector: Select Onedrive from the drop down list of available Connectors.
    2. Connector version: Select the Connector version from the drop down list of available versions.
    3. In the Connection Name field, enter a name for the Connection instance.

      Connection names must meet the following criteria:

      • Connection names can use letters, numbers, or hyphens.
      • Letters must be lower-case.
      • Connection names must begin with a letter and end with a letter or number.
      • Connection names cannot exceed 63 characters.
    4. Optionally, enter a Description for the connection instance.
    5. Service Account: Select a service account that has the required roles.
    6. Verbosity Level: Verbosity level for connection, varies from 1-5. Higher verbosity level will log all the communication details (request,response & ssl certificates).
    7. Azure Tenant: The Microsoft Online tenant that is used to access data. If not specified, your default tenant is used.
    8. Drive ID: The ID of the drive that you want to use.
    9. List Group Drives Optionally, you can choose to list your group drives when querying drives.
    10. Optionally, configure the Connection node settings:

      • Minimum number of nodes: Enter the minimum number of connection nodes.
      • Maximum number of nodes: Enter the maximum number of connection nodes.

      A node is a unit (or replica) of a connection that processes transactions. More nodes are required to process more transactions for a connection and conversely, fewer nodes are required to process fewer transactions. To understand how the nodes affect your connector pricing, see Pricing for connection nodes. If you don't enter any values, by default the minimum nodes are set to 2 (for better availability) and the maximum nodes are set to 50.

    11. Click NEXT.
    12. In the Authorization section, enter details of the client ID and client secret.
      • Client ID: The client ID used for requesting access tokens.
      • Scope: A comma-separated list of desired scopes from Microsoft Azure Portal.
      • Client Secret: Secret Manager Secret containing the client secret for the connected app you created.
      • Secret version: Secret version for the secret selected above.
      • Authorization URL: Authorization URL generated when creating client
    13. Click NEXT.
    14. Review: Review your connection and authentication details.
    15. Click Create.

    For the Authorization code authentication type, after creating the connection, you must perform a few additional steps for configuring authentication. For more information, see Additional steps after connection creation.

    Additional steps after connection creation

    If you selected OAuth 2.0 - Authorization code for authentication, you must do the following additional steps after creating the connection:

    1. In the Connections page, locate the newly created connection.

      Notice that the Status for the new connector will be Authorization required.

    2. Click Authorization required.

      This shows the Edit authorization pane.

    3. Copy the Redirect URI value to your external application.
    4. Verify the authorization details.
    5. Click Authorize.

      If the authorization is successful, the connection status will be set to Active in the Connections page.

    Re-authorization for authorization code

    If you are using Authorization code authentication type and have made any cofiguration changes in your application, you must re-authorize your Onedrive connection. To re-authorize a connection, perform the following steps:

    1. Click on the required connection in the Connections page.

      This opens the connection details page.

    2. Click Edit to edit the connection details.
    3. Verify the OAuth 2.0 - Authorization code details in the Authentication section.

      If required, make the necessary changes.

    4. Click Save. This takes you to the connection details page.
    5. Click Edit authorization in the Authentication section. This shows the Authorize pane.
    6. Click Authorize.

      If the authorization is successful, the connection status will be set to Active in the Connections page.

    System limitations

    The Onedrive connector can process can process a maximum of 15 transactions per minute, per node, and throttles any transactions beyond this limit:

    By default, Integration Connectors allocates 2 nodes (for better availability) for a connection.

    For information on the limits applicable to Integration Connectors, see Limits.

    Use the Onedrive connection in an integration

    After you create the connection, it becomes available in both Apigee Integration and Application Integration. You can use the connection in an integration through the Connectors task.

    • To understand how to create and use the Connectors task in Apigee Integration, see Connectors task.
    • To understand how to create and use the Connectors task in Application Integration, see Connectors task.

    Entities, operations, and actions

    All the Integration Connectors provide a layer of abstraction for the objects of the connected application. You can access an application's objects only through this abstraction. The abstraction is exposed to you as entities, operations, and actions.

    • Entity: An entity can be thought of as an object, or a collection of properties, in the connected application or service. The definition of an entity differs from a connector to a connector. For example, in a database connector, tables are the entities, in a file server connector, folders are the entities, and in a messaging system connector, queues are the entities.

      However, it is possible that a connector doesn't support or have any entities, in which case the Entities list will be empty.

    • Operation: An operation is the activity that you can perform on an entity. You can perform any of the following operations on an entity:

      Selecting an entity from the available list, generates a list of operations available for the entity. For a detailed description of the operations, see the Connectors task's entity operations. However, if a connector doesn't support any of the entity operations, such unsupported operations aren't listed in the Operations list.

    • Action: An action is a first class function that is made available to the integration through the connector interface. An action lets you make changes to an entity or entities, and vary from connector to connector. Normally, an action will have some input parameters, and an output parameter. However, it is possible that a connector doesn't support any action, in which case the Actions list will be empty.

    Actions

    The Onedrive connection supports the following actions:

    CopyResource action

    The following table describes the input parameters of the CopyResource action.

    Input parameters of the CopyResource action

    Parameter name Required Data type Description
    ParentID Yes String The ID of the folder you want to copy the resource to.
    ResourceId Yes String Id of the resource.

    CreateFolder action

    The following table describes the input parameters of the CreateFolder action.

    Input parameters of the CreateFolder action

    Parameter name Required Data type Description
    FolderName Yes String Name of the folder to be created.
    queueName No String Message to be sent to the TIBCO EMS queue. The maximum message size supported is 10 MB.

    DeleteResource action

    The following table describes the input parameters of the DeleteResource action.

    Input parameters of the DeleteResource action

    Parameter name Required Data type Description
    ResourceId Yes String Id of the resource.

    MoveResource action

    The following table describes the input parameters of the MoveResource action.

    Input parameters of the MoveResource action

    Parameter name Required Data type Description
    ResourceId Yes String Id of the resource.
    DestinationID Yes String The ID of the folder you want to move the resource to.

    RenameResource action

    The following table describes the input parameters of the RenameResource action.

    Input parameters of the RenameResource action

    Parameter name Required Data type Description
    ResourceId Yes String Id of the resource.
    Name Yes String The new name of the resource.

    UploadFile action

    The following table describes the input parameters of the UploadFile action.

    Input parameters of the UploadFile action

    Parameter name Required Data type Description
    ParentId Yes String The parent to which to upload the file.
    FileName Yes String Name of the file to which you'll upload content to.