创建独立集群

在 Anthos clusters on Bare Metal 中,独立集群运行工作负载并管理自身,但无法管理其他集群。在资源受限的情况下,使用独立集群可使您免于运行单独的管理员集群。

创建独立集群时,您需要在减少资源和整体安全性之间进行一定的权衡。由于独立集群管理自身,因此在同一集群上运行工作负载会增加敏感的管理数据(如 SSH 密钥)的安全漏洞的风险。

您可以使用 bmctl 命令创建具有单个控制层面的独立集群。bmctl 命令可以在单独的工作站或某一个独立集群节点上运行。请注意,这种配置虽然使用的资源更少,但是无法提供高可用性 (HA),并且生成的集群具有单一故障点。

您也可以在独立模式下创建高可用性 (HA) 集群。在高可用性独立集群中,如果一个节点发生故障,其他节点将取代此节点。您可以通过为控制层面指定多个节点来创建高可用性集群。

预备知识:

  • gs://anthos-baremetal-release/bmctl/1.6.2/linux-amd64/bmctl 下载的 bmctl
  • 运行 bmctl 的工作站与目标独立集群中所有节点之间有网络连接。
  • 运行 bmctl 的工作站与目标独立集群的控制层面 VIP 之间有网络连接。
  • 用于创建独立集群的 SSH 密钥应作为 root 或 SUDO 用户在目标独立集群的所有节点上提供。

登录 gcloud 并创建独立集群配置文件

  1. 使用 gcloud auth application-default login 以用户身份登录 gcloud:
  2. gcloud auth application-default login
    
    您需要具有 Project Owner/Editor 角色才能使用自动 API 启用和服务帐号创建功能,具体如下所述。您还可以向用户添加以下 IAM 角色:
    • Service Account Admin
    • Service Account Key Admin
    • Project IAM Admin
    • Compute Viewer
    • Service Usage Admin
    或者,如果您已有具备这些角色的服务帐号,请运行以下命令:
    export GOOGLE_APPLICATION_CREDENTIALS=JSON_KEY_FILE
    
    JSON_KEY_FILE 指定服务帐号 JSON 密钥文件的路径。
  3. 获取要用于创建集群的 Cloud 项目 ID:
  4. export CLOUD_PROJECT_ID=$(gcloud config get-value project)
    

使用 bmctl 创建独立集群配置文件

登录 gcloud 并设置项目后,您可以使用 bmctl 命令创建集群配置文件。请注意,在此示例中,所有服务帐号都由 bmctl create config 命令自动创建:

bmctl create config -c STANDALONE_CLUSTER_NAME --enable-apis \
    --create-service-accounts --project-id=CLOUD_PROJECT_ID

以下示例展示了如何为与项目 ID my-gcp-project 关联且名为 standalone1 的独立集群创建配置文件:

bmctl create config -c standalone1 --create-service-accounts --project-id=my-gcp-project

该文件将写入 bmctl-workspace/standalone1/standalone1.yaml

除了自动启用 API 和创建服务帐号外,您还可以为现有服务帐号提供适当的 IAM 权限。也就是说,您可以在上一步中跳过 bmctl 命令中的自动服务帐号创建部分:

bmctl create config -c standalone1

修改集群配置文件

现在您有了集群配置文件,请对其进行修改以做出以下更改:

  1. 提供 SSH 私钥以访问独立集群节点:
  2. # bmctl configuration variables. Because this section is valid YAML but not a valid Kubernetes
    # resource, this section can only be included when using bmctl to
    # create the initial admin/hybrid cluster. Afterwards, when creating user clusters by directly
    # applying the cluster and node pool resources to the existing cluster, you must remove this
    # section.
    gcrKeyPath:
    /bmctl/bmctl-workspace/.sa-keys/my-gcp-project-anthos-baremetal-gcr.json
    sshPrivateKeyPath: /path/to/your/ssh_private_key
    gkeConnectAgentServiceAccountKeyPath: /bmctl/bmctl-workspace/.sa-keys/my-gcp-project-anthos-baremetal-connect.json
    gkeConnectRegisterServiceAccountKeyPath: /bmctl/bmctl-workspace/.sa-keys/my-gcp-project-anthos-baremetal-register.json
    cloudOperationsServiceAccountKeyPath: /bmctl/bmctl-workspace/.sa-keys/my-gcp-project-anthos-baremetal-cloud-ops.json
  3. 更改配置以指定 standalone 集群类型而不是 admin
  4. spec:
      # Cluster type. This can be:
      #   1) admin:  to create an admin cluster. This can later be used to create user clusters.
      #   2) user:   to create a user cluster. Requires an existing admin cluster.
      #   3) hybrid: to create a hybrid cluster that runs admin cluster components and user workloads.
      #   4) standalone: to create a cluster that manages itself, runs user workloads, but does not manage other clusters.
      type: standalone
  5. (可选)更改配置以指定多节点、高可用性的控制平面。指定奇数个节点,以通过多数仲裁实现高可用性:
  6.   # Control plane configuration
      controlPlane:
        nodePoolSpec:
          nodes:
          # Control plane node pools. Typically, this is either a single machine
          # or 3 machines if using a high availability deployment.
          - address: 10.200.0.4
          - address: 10.200.0.5
          - address: 10.200.0.6

使用集群配置创建独立集群

使用 bmctl 命令部署独立集群:

bmctl create cluster -c CLUSTER_NAME

CLUSTER_NAME 指定您在上一部分中创建的集群的名称。

以下示例命令创建名为 standalone1 的集群:

bmctl create cluster -c standalone1

完整的独立集群配置示例

以下是使用 bmctl 命令创建的独立集群配置文件示例。请注意,此示例配置中使用了占位符集群名称、VIP 和地址。这些信息可能不适用于您的网络。

gcrKeyPath: /bmctl/bmctl-workspace/.sa-keys/my-gcp-project-anthos-baremetal-gcr.json
sshPrivateKeyPath: /bmctl/bmctl-workspace/.ssh/id_rsa
gkeConnectAgentServiceAccountKeyPath: /bmctl/bmctl-workspace/.sa-keys/my-gcp-project-anthos-baremetal-connect.json
gkeConnectRegisterServiceAccountKeyPath: /bmctl/bmctl-workspace/.sa-keys/my-gcp-project-anthos-baremetal-register.json
cloudOperationsServiceAccountKeyPath: /bmctl/bmctl-workspace/.sa-keys/my-gcp-project-anthos-baremetal-cloud-ops.json
---
apiVersion: v1
kind: Namespace
metadata:
  name: cluster-standalone1
---
apiVersion: baremetal.cluster.gke.io/v1
kind: Cluster
metadata:
  name: standalone1
  namespace: cluster-standalone1
spec:
  # Cluster type. This can be:
  #   1) admin:  to create an admin cluster. This can later be used to create user clusters.
  #   2) user:   to create a user cluster. Requires an existing admin cluster.
  #   3) hybrid: to create a hybrid cluster that runs admin cluster components and user workloads.
  #   4) standalone: to create a cluster that manages itself, runs user workloads, but does not manage other clusters.
  type: standalone
  # Anthos cluster version.
  anthosBareMetalVersion: 1.6.2
  # GKE connect configuration
  gkeConnect:
    projectID: $GOOGLE_PROJECT_ID
  # Control plane configuration
  controlPlane:
    nodePoolSpec:
      nodes:
      # Control plane node pools. Typically, this is either a single machine
      # or 3 machines if using a high availability deployment.
      - address: 10.200.0.4
  # Cluster networking configuration
  clusterNetwork:
    # Pods specify the IP ranges from which Pod networks are allocated.
    pods:
      cidrBlocks:
      - 192.168.0.0/16
    # Services specify the network ranges from which service VIPs are allocated.
    # This can be any RFC 1918 range that does not conflict with any other IP range
    # in the cluster and node pool resources.
    services:
      cidrBlocks:
      - 10.96.0.0/12
  # Load balancer configuration
  loadBalancer:
    # Load balancer mode can be either 'bundled' or 'manual'.
    # In 'bundled' mode a load balancer will be installed on load balancer nodes during cluster creation.
    # In 'manual' mode the cluster relies on a manually-configured external load balancer.
    mode: bundled
    # Load balancer port configuration
    ports:
      # Specifies the port the LB serves the kubernetes control plane on.
      # In 'manual' mode the external load balancer must be listening on this port.
      controlPlaneLBPort: 443
    # There are two load balancer VIPs: one for the control plane and one for the L7 Ingress
    # service. The VIPs must be in the same subnet as the load balancer nodes.
    vips:
      # ControlPlaneVIP specifies the VIP to connect to the Kubernetes API server.
      # This address must not be in the address pools below.
      controlPlaneVIP: 10.200.0.71
      # IngressVIP specifies the VIP shared by all services for ingress traffic.
      # Allowed only in non-admin clusters.
      # This address must be in the address pools below.
      ingressVIP: 10.200.0.72
    # AddressPools is a list of non-overlapping IP ranges for the data plane load balancer.
    # All addresses must be in the same subnet as the load balancer nodes.
    # Address pool configuration is only valid for 'bundled' LB mode in non-admin clusters.
    addressPools:
    - name: pool1
      addresses:
      # Each address must be either in the CIDR form (1.2.3.0/24)
      # or range form (1.2.3.1-1.2.3.5).
      - 10.200.0.72-10.200.0.90
    # A load balancer nodepool can be configured to specify nodes used for load balancing.
    # These nodes are part of the kubernetes cluster and run regular workloads as well as load balancers.
    # If the node pool config is absent then the control plane nodes are used.
    # Node pool configuration is only valid for 'bundled' LB mode.
    # nodePoolSpec:
    #  nodes:
    #  - address: <Machine 1 IP>
  # Proxy configuration
  # proxy:
  #   url: http://[username:password@]domain
  #   # A list of IPs, hostnames or domains that should not be proxied.
  #   noProxy:
  #   - 127.0.0.1
  #   - localhost
  # Logging and Monitoring
  clusterOperations:
    # Cloud project for logs and metrics.
    projectID: <Google Project ID>$GOOGLE_PROJECT_ID
    # Cloud location for logs and metrics.
    location: us-central1
    # Whether collection of application logs/metrics should be enabled (in addition to
    # collection of system logs/metrics which correspond to system components such as
    # Kubernetes control plane or cluster management agents).
    # enableApplication: false
  # Storage configuration
  storage:
    # lvpNodeMounts specifies the config for local PersistentVolumes backed by mounted disks.
    # These disks need to be formatted and mounted by the user, which can be done before or after
    # cluster creation.
    lvpNodeMounts:
      # path specifies the host machine path where mounted disks will be discovered and a local PV
      # will be created for each mount.
      path: /mnt/localpv-disk
      # storageClassName specifies the StorageClass that PVs will be created with. The StorageClass
      # is created during cluster creation.
      storageClassName: local-disks
    # lvpShare specifies the config for local PersistentVolumes backed by subdirectories in a shared filesystem.
    # These subdirectories are automatically created during cluster creation.
    lvpShare:
      # path specifies the host machine path where subdirectories will be created on each host. A local PV
      # will be created for each subdirectory.
      path: /mnt/localpv-share
      # storageClassName specifies the StorageClass that PVs will be created with. The StorageClass
      # is created during cluster creation.
      storageClassName: local-shared
      # numPVUnderSharedPath specifies the number of subdirectories to create under path.
      numPVUnderSharedPath: 5
  # Authentication; uncomment this section if you wish to enable authentication to the cluster with OpenID Connect.
  # authentication:
  #   oidc:
  #     # issuerURL specifies the URL of your OpenID provider, such as "https://accounts.google.com". The Kubernetes API
  #     # server uses this URL to discover public keys for verifying tokens. Must use HTTPS.
  #     issuerURL: <URL for OIDC Provider; required>
  #     # clientID specifies the ID for the client application that makes authentication requests to the OpenID
  #     # provider.
  #     clientID: <ID for OIDC client application; required>
  #     # clientSecret specifies the secret for the client application.
  #     clientSecret: <Secret for OIDC client application; optional>
  #     # kubectlRedirectURL specifies the redirect URL (required) for the gcloud CLI, such as
  #     # "http://localhost:[PORT]/callback".
  #     kubectlRedirectURL: <Redirect URL for the gcloud CLI; optional default is             "http://kubectl.redirect.invalid"
  #     # username specifies the JWT claim to use as the username. The default is "sub", which is expected to be a
  #     # unique identifier of the end user.
  #     username: <JWT claim to use as the username; optional, default is "sub">
  #     # usernamePrefix specifies the prefix prepended to username claims to prevent clashes with existing names.
  #     usernamePrefix: <Prefix prepended to username claims; optional>
  #     # group specifies the JWT claim that the provider will use to return your security groups.
  #     group: <JWT claim to use as the group name; optional>
  #     # groupPrefix specifies the prefix prepended to group claims to prevent clashes with existing names.
  #     groupPrefix: <Prefix prepended to group claims; optional>
  #     # scopes specifies additional scopes to send to the OpenID provider as a comma-delimited list.
  #     scopes: Additional scopes to send to OIDC provider as a comma-separated list; optional>
  #     # extraParams specifies additional key-value parameters to send to the OpenID provider as a comma-delimited
  #     # list.
  #     extraParams: Additional key-value parameters to send to OIDC provider as a comma-separated list; optional>
  #     # certificateAuthorityData specifies a Base64 PEM-encoded certificate authority certificate of your identity
  #     # provider. It's not needed if your identity provider's certificate was issued by a well-known public CA.
  #     certificateAuthorityData: Base64 PEM-encoded certificate authority certificate of your OIDC provider; optional>
  # Node access configuration; uncomment this section if you wish to use a non-root user
  # with passwordless sudo capability for machine login.
  # nodeAccess:
  #   loginUser: login user name
---
# Node pools for worker nodes
apiVersion: baremetal.cluster.gke.io/v1
kind: NodePool
metadata:
  name: node-pool-1
  namespace: cluster-standalone1
spec:
  clusterName: standalone1
  nodes:
  - address: 10.200.0.5
  - address: 10.200.0.6