Solo i vincitori dell'asta 105 della Federal Communications Commission (FCC) o un sublicensore verificato possono ottenere la protezione per i propri canali PAL.
Contatta il team di assistenza del fornitore del tuo CBSD o del tuo proxy per il dominio (DP) per confermare quanto segue:
Il tuo fornitore supporta i PAL e ha superato i test di interoperabilità dei PAL con SAS.
Se sono necessari aggiornamenti del firmware per il supporto del formato PAL.
Se devi configurare impostazioni SAS o DP specifiche per i PAL.
Verifica il numero di registrazione FCC
Per richiedere sovvenzioni PAL, il tuo FRN deve essere salvato nel portale SAS.
Se il numero FRN non è corretto, SAS non può fornire protezione PAL per i tuoi canali PAL nei paesi in cui hai ottenuto la licenza.
Verifica che il numero FRN indicato sia corretto. Se il campo FRN (numero di riferimento SAS) è mancante o errato,
contatta l'assistenza SAS
e fornisci il numero FRN corretto.
Preparare il CBSD per una concessione PAL
Devi richiedere la concessione del PAL al tuo CBSD o DP. Non puoi richiedere una sovvenzione dal portale SAS.
Per preparare il tuo CBSD per una concessione PAL:
Verifica che le coordinate GPS del tuo CBSD si trovino all'interno del
county PAL.
Verifica che i canali PAL siano contrassegnati da un P.
Richiedi una sovvenzione per uno o più canali PAL. Rivolgiti al tuo fornitore CBSD o DP per istruzioni su come richiedere una sovvenzione sul tuo canale PAL.
Dopo aver richiesto una concessione PAL valida al tuo CBSD,
la SAS genera automaticamente un PPA alle successive attività periodiche coordinate tra le SAS (CPAS). Eventuali concessioni esistenti per i CBSD di altri operatori sul tuo canale PAL all'interno del PPA vengono terminate dopo il CPAS. Scopri di più sui PPA.
Una singola concessione non può contenere sia le frequenze PAL che GAA. Se hai bisogno di più larghezza di banda rispetto ai canali PAL, rivolgiti al tuo fornitore di CBSD per ricevere istruzioni su come richiedere concessioni separate per gli intervalli di frequenza PAL e GAA. Altri operatori non proteggono le concessioni GAA accanto a una concessione PAL di CBSD dalle interferenze.
[[["Facile da capire","easyToUnderstand","thumb-up"],["Il problema è stato risolto","solvedMyProblem","thumb-up"],["Altra","otherUp","thumb-up"]],[["Difficile da capire","hardToUnderstand","thumb-down"],["Informazioni o codice di esempio errati","incorrectInformationOrSampleCode","thumb-down"],["Mancano le informazioni o gli esempi di cui ho bisogno","missingTheInformationSamplesINeed","thumb-down"],["Problema di traduzione","translationIssue","thumb-down"],["Altra","otherDown","thumb-down"]],["Ultimo aggiornamento 2025-09-04 UTC."],[],[],null,["# Use Priority Access Licenses\n\nIf you are a\n[Priority Access License (PAL)](/spectrum-access-system/docs/key-terms#pal) licensee,\nyou can use the\n[Google Spectrum Access System (SAS) Portal](/spectrum-access-system/docs/key-terms#sas-portal)\nto do the following:\n\n- Confirm if your PAL is properly registered with [Spectrum Access System (SAS)](/spectrum-access-system/docs/key-terms#sas).\n- Check the geographic areas that are protected from [General Authorized Access (GAA)](/spectrum-access-system/docs/key-terms#gaa) interference for your PAL-protected SASs.\n\n| **Note:** Tier 1 incumbents can temporarily suspend PAL operators as needed. [Learn more about PALs](/spectrum-access-system/docs/pals).\n\nBefore you begin\n----------------\n\nOnly winners from the [Federal Communications Commission (FCC) auction 105](https://www.fcc.gov/auction/105),\nor a verified sub-licensee can get protection on their PAL channels.\nContact your CBSD or Domain Proxy (DP) vendor support team to\nconfirm the following:\n\n- Your vendor supports PALs and passed PAL interoperability testing with SAS.\n- If there are firmware upgrades required for PAL support.\n- If you need to configure any SAS or DP settings specific to PALs.\n\nVerify your FCC registration number\n-----------------------------------\n\nYour FRN must be saved to the SAS Portal to request PAL grants.\nIf the FRN is not correct, SAS cannot provide PAL protection on\nyour PAL channels in your licensed counties.\n\nTo verify the FRN, do the following:\n\n1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).\n2. Click **View deployments**.\n3. On the left, click *settings* **Settings**.\n4. On the right, select the **FRN** field.\n5. Confirm that the FRN listed is correct. If the **FRN** field is missing or incorrect, contact [SAS Support](/spectrum-access-system/docs/getting-support) and provide the correct FRN.\n\nPrepare your CBSD for a PAL grant\n---------------------------------\n\nYou must request the PAL grant from your CBSD or DP. You cannot\nrequest a grant from the SAS Portal.\n\nTo prepare your CBSD for a PAL grant, follow these steps:\n\n1. Confirm that your CBSD's GPS coordinates are located within your PAL county.\n 1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).\n 2. Click **View deployments**.\n 3. On the left, click *map* **Map view**.\n 4. On the left, click *layers* **Overlays** , and then click **PAL**.\n 5. Expand the county folder and find the item labeled with the county name followed by county.\n 6. To show it on the map, select the county boundary.\n2. Confirm your PAL channels.\n 1. [Find and select your CBSD](/spectrum-access-system/docs/(/spectrum-access-system/docs/cbsd/review-configuration)).\n 2. On the right, click the **Status** tab.\n 3. Confirm that your PAL channels are marked with a **P**.\n3. Request a grant on one or multiple PAL channels. Check with your CBSD or DP vendor for instructions about how to request a grant on your PAL channel.\n4. After you request a valid PAL grant from your CBSD, SAS automatically generates a PPA at the next Coordinated Periodic Activities among SASs (CPAS). Any existing grants for other operators' CBSDs on your PAL channel within the PPA are terminated after CPAS. [Learn more about PPAs](/spectrum-access-system/docs/manage-ppa).\n\nA single grant cannot contain both PAL and GAA frequencies. If you need more\nbandwidth than you have PAL channels, check with your CBSD vendor for\ninstructions about how to request separate grants for the PAL and GAA frequency\nranges. Other operators do not protect GAA grants next to a\nCBSD's PAL grant from interference.\n\nView the PPA for a PAL-protected CBSD\n-------------------------------------\n\n1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).\n2. If you have access to multiple organizations, select the organization with the CBSD that you want to review.\n3. [Find your CBSD](/spectrum-access-system/docs/cbsd/review-configuration).\n4. Click the CBSD.\n5. On the right, click the **Coex** tab.\n6. In the **PAL Protection Areas** section, click the PPAs to view their boundaries.\n\n | **Important:** If a PPA is unavailable and you cannot click it, then the PPA doesn't have interference protection from GAA operators. Protection begins after the PAL grant has gone through CPAS. [Learn more about PPAs](/spectrum-access-system/docs/manage-ppa).\n\nView PALs and PPAs for your PAL counties\n----------------------------------------\n\n1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).\n2. If you have access to multiple organizations, select the organization with the CBSD that you want to review.\n3. On the left, click *layers* **Overlays**.\n4. Click the **PAL** tab.\n5. To find all PALs assigned to the county, expand the county folder.\n6. Select a PAL to load and show all PPAs associated with that PAL on the map.\n\nWhat's next\n-----------\n\n- Learn about [PALs](/spectrum-access-system/docs/pals).\n- Learn about [Spectrum Access System](/spectrum-access-system/docs/overview).\n- Learn about [key SAS terms](/spectrum-access-system/docs/key-terms).\n- [Troubleshoot SAS issues](/spectrum-access-system/docs/troubleshooting)."]]
