Class PostalAddress.Builder (2.41.0) 

public static final class PostalAddress.Builder extends GeneratedMessageV3.Builder<PostalAddress.Builder> implements PostalAddressOrBuilder

Represents a postal address, e.g. for postal delivery or payments addresses. Given a postal address, a postal service can deliver items to a premise, P.O. Box or similar. It is not intended to model geographical locations (roads, towns, mountains).

In typical usage an address would be created via user input or from importing existing data, depending on the type of process.

Advice on address input / editing:

Protobuf type google.type.PostalAddress

Inheritance

Object > AbstractMessageLite.Builder<MessageType,BuilderType> > AbstractMessage.Builder<BuilderType> > GeneratedMessageV3.Builder > PostalAddress.Builder

Static Methods

getDescriptor()

public static final Descriptors.Descriptor getDescriptor()
Returns
Type Description
Descriptor

Methods

addAddressLines(String value)

public PostalAddress.Builder addAddressLines(String value)

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Parameter
Name Description
value String

The addressLines to add.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

addAddressLinesBytes(ByteString value)

public PostalAddress.Builder addAddressLinesBytes(ByteString value)

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Parameter
Name Description
value ByteString

The bytes of the addressLines to add.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

addAllAddressLines(Iterable<String> values)

public PostalAddress.Builder addAllAddressLines(Iterable<String> values)

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Parameter
Name Description
values Iterable<String>

The addressLines to add.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

addAllRecipients(Iterable<String> values)

public PostalAddress.Builder addAllRecipients(Iterable<String> values)

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Parameter
Name Description
values Iterable<String>

The recipients to add.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

addRecipients(String value)

public PostalAddress.Builder addRecipients(String value)

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Parameter
Name Description
value String

The recipients to add.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

addRecipientsBytes(ByteString value)

public PostalAddress.Builder addRecipientsBytes(ByteString value)

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Parameter
Name Description
value ByteString

The bytes of the recipients to add.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

addRepeatedField(Descriptors.FieldDescriptor field, Object value)

public PostalAddress.Builder addRepeatedField(Descriptors.FieldDescriptor field, Object value)
Parameters
Name Description
field FieldDescriptor
value Object
Returns
Type Description
PostalAddress.Builder
Overrides

build()

public PostalAddress build()
Returns
Type Description
PostalAddress

buildPartial()

public PostalAddress buildPartial()
Returns
Type Description
PostalAddress

clear()

public PostalAddress.Builder clear()
Returns
Type Description
PostalAddress.Builder
Overrides

clearAddressLines()

public PostalAddress.Builder clearAddressLines()

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Returns
Type Description
PostalAddress.Builder

This builder for chaining.

clearAdministrativeArea()

public PostalAddress.Builder clearAdministrativeArea()

Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (e.g. "Barcelona" and not "Catalonia"). Many countries don't use an administrative area in postal addresses. E.g. in Switzerland this should be left unpopulated.

string administrative_area = 6;

Returns
Type Description
PostalAddress.Builder

This builder for chaining.

clearField(Descriptors.FieldDescriptor field)

public PostalAddress.Builder clearField(Descriptors.FieldDescriptor field)
Parameter
Name Description
field FieldDescriptor
Returns
Type Description
PostalAddress.Builder
Overrides

clearLanguageCode()

public PostalAddress.Builder clearLanguageCode()

Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address' country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations.

If this value is not known, it should be omitted (rather than specifying a possibly incorrect default).

Examples: "zh-Hant", "ja", "ja-Latn", "en".

string language_code = 3;

Returns
Type Description
PostalAddress.Builder

This builder for chaining.

clearLocality()

public PostalAddress.Builder clearLocality()

Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.

string locality = 7;

Returns
Type Description
PostalAddress.Builder

This builder for chaining.

clearOneof(Descriptors.OneofDescriptor oneof)

public PostalAddress.Builder clearOneof(Descriptors.OneofDescriptor oneof)
Parameter
Name Description
oneof OneofDescriptor
Returns
Type Description
PostalAddress.Builder
Overrides

clearOrganization()

public PostalAddress.Builder clearOrganization()

Optional. The name of the organization at the address.

string organization = 11;

Returns
Type Description
PostalAddress.Builder

This builder for chaining.

clearPostalCode()

public PostalAddress.Builder clearPostalCode()

Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (e.g. state/zip validation in the U.S.A.).

string postal_code = 4;

Returns
Type Description
PostalAddress.Builder

This builder for chaining.

clearRecipients()

public PostalAddress.Builder clearRecipients()

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Returns
Type Description
PostalAddress.Builder

This builder for chaining.

clearRegionCode()

public PostalAddress.Builder clearRegionCode()

Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See http://cldr.unicode.org/ and http://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: "CH" for Switzerland.

string region_code = 2;

Returns
Type Description
PostalAddress.Builder

This builder for chaining.

clearRevision()

public PostalAddress.Builder clearRevision()

The schema revision of the PostalAddress. This must be set to 0, which is the latest revision.

All new revisions must be backward compatible with old revisions.

int32 revision = 1;

Returns
Type Description
PostalAddress.Builder

This builder for chaining.

clearSortingCode()

public PostalAddress.Builder clearSortingCode()

Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like "CEDEX", optionally followed by a number (e.g. "CEDEX 7"), or just a number alone, representing the "sector code" (Jamaica), "delivery area indicator" (Malawi) or "post office indicator" (e.g. Côte d'Ivoire).

string sorting_code = 5;

Returns
Type Description
PostalAddress.Builder

This builder for chaining.

clearSublocality()

public PostalAddress.Builder clearSublocality()

Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.

string sublocality = 8;

Returns
Type Description
PostalAddress.Builder

This builder for chaining.

clone()

public PostalAddress.Builder clone()
Returns
Type Description
PostalAddress.Builder
Overrides

getAddressLines(int index)

public String getAddressLines(int index)

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Parameter
Name Description
index int

The index of the element to return.
Returns
Type Description
String

The addressLines at the given index.

getAddressLinesBytes(int index)

public ByteString getAddressLinesBytes(int index)

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Parameter
Name Description
index int

The index of the value to return.
Returns
Type Description
ByteString

The bytes of the addressLines at the given index.

getAddressLinesCount()

public int getAddressLinesCount()

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Returns
Type Description
int

The count of addressLines.

getAddressLinesList()

public ProtocolStringList getAddressLinesList()

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Returns
Type Description
ProtocolStringList

A list containing the addressLines.

getAdministrativeArea()

public String getAdministrativeArea()

Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (e.g. "Barcelona" and not "Catalonia"). Many countries don't use an administrative area in postal addresses. E.g. in Switzerland this should be left unpopulated.

string administrative_area = 6;

Returns
Type Description
String

The administrativeArea.

getAdministrativeAreaBytes()

public ByteString getAdministrativeAreaBytes()

Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (e.g. "Barcelona" and not "Catalonia"). Many countries don't use an administrative area in postal addresses. E.g. in Switzerland this should be left unpopulated.

string administrative_area = 6;

Returns
Type Description
ByteString

The bytes for administrativeArea.

getDefaultInstanceForType()

public PostalAddress getDefaultInstanceForType()
Returns
Type Description
PostalAddress

getDescriptorForType()

public Descriptors.Descriptor getDescriptorForType()
Returns
Type Description
Descriptor
Overrides

getLanguageCode()

public String getLanguageCode()

Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address' country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations.

If this value is not known, it should be omitted (rather than specifying a possibly incorrect default).

Examples: "zh-Hant", "ja", "ja-Latn", "en".

string language_code = 3;

Returns
Type Description
String

The languageCode.

getLanguageCodeBytes()

public ByteString getLanguageCodeBytes()

Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address' country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations.

If this value is not known, it should be omitted (rather than specifying a possibly incorrect default).

Examples: "zh-Hant", "ja", "ja-Latn", "en".

string language_code = 3;

Returns
Type Description
ByteString

The bytes for languageCode.

getLocality()

public String getLocality()

Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.

string locality = 7;

Returns
Type Description
String

The locality.

getLocalityBytes()

public ByteString getLocalityBytes()

Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.

string locality = 7;

Returns
Type Description
ByteString

The bytes for locality.

getOrganization()

public String getOrganization()

Optional. The name of the organization at the address.

string organization = 11;

Returns
Type Description
String

The organization.

getOrganizationBytes()

public ByteString getOrganizationBytes()

Optional. The name of the organization at the address.

string organization = 11;

Returns
Type Description
ByteString

The bytes for organization.

getPostalCode()

public String getPostalCode()

Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (e.g. state/zip validation in the U.S.A.).

string postal_code = 4;

Returns
Type Description
String

The postalCode.

getPostalCodeBytes()

public ByteString getPostalCodeBytes()

Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (e.g. state/zip validation in the U.S.A.).

string postal_code = 4;

Returns
Type Description
ByteString

The bytes for postalCode.

getRecipients(int index)

public String getRecipients(int index)

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Parameter
Name Description
index int

The index of the element to return.
Returns
Type Description
String

The recipients at the given index.

getRecipientsBytes(int index)

public ByteString getRecipientsBytes(int index)

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Parameter
Name Description
index int

The index of the value to return.
Returns
Type Description
ByteString

The bytes of the recipients at the given index.

getRecipientsCount()

public int getRecipientsCount()

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Returns
Type Description
int

The count of recipients.

getRecipientsList()

public ProtocolStringList getRecipientsList()

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Returns
Type Description
ProtocolStringList

A list containing the recipients.

getRegionCode()

public String getRegionCode()

Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See http://cldr.unicode.org/ and http://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: "CH" for Switzerland.

string region_code = 2;

Returns
Type Description
String

The regionCode.

getRegionCodeBytes()

public ByteString getRegionCodeBytes()

Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See http://cldr.unicode.org/ and http://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: "CH" for Switzerland.

string region_code = 2;

Returns
Type Description
ByteString

The bytes for regionCode.

getRevision()

public int getRevision()

The schema revision of the PostalAddress. This must be set to 0, which is the latest revision.

All new revisions must be backward compatible with old revisions.

int32 revision = 1;

Returns
Type Description
int

The revision.

getSortingCode()

public String getSortingCode()

Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like "CEDEX", optionally followed by a number (e.g. "CEDEX 7"), or just a number alone, representing the "sector code" (Jamaica), "delivery area indicator" (Malawi) or "post office indicator" (e.g. Côte d'Ivoire).

string sorting_code = 5;

Returns
Type Description
String

The sortingCode.

getSortingCodeBytes()

public ByteString getSortingCodeBytes()

Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like "CEDEX", optionally followed by a number (e.g. "CEDEX 7"), or just a number alone, representing the "sector code" (Jamaica), "delivery area indicator" (Malawi) or "post office indicator" (e.g. Côte d'Ivoire).

string sorting_code = 5;

Returns
Type Description
ByteString

The bytes for sortingCode.

getSublocality()

public String getSublocality()

Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.

string sublocality = 8;

Returns
Type Description
String

The sublocality.

getSublocalityBytes()

public ByteString getSublocalityBytes()

Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.

string sublocality = 8;

Returns
Type Description
ByteString

The bytes for sublocality.

internalGetFieldAccessorTable()

protected GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
Returns
Type Description
FieldAccessorTable
Overrides

isInitialized()

public final boolean isInitialized()
Returns
Type Description
boolean
Overrides

mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

public PostalAddress.Builder mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)
Parameters
Name Description
input CodedInputStream
extensionRegistry ExtensionRegistryLite
Returns
Type Description
PostalAddress.Builder
Overrides
Exceptions
Type Description
IOException

mergeFrom(Message other)

public PostalAddress.Builder mergeFrom(Message other)
Parameter
Name Description
other Message
Returns
Type Description
PostalAddress.Builder
Overrides

mergeFrom(PostalAddress other)

public PostalAddress.Builder mergeFrom(PostalAddress other)
Parameter
Name Description
other PostalAddress
Returns
Type Description
PostalAddress.Builder

mergeUnknownFields(UnknownFieldSet unknownFields)

public final PostalAddress.Builder mergeUnknownFields(UnknownFieldSet unknownFields)
Parameter
Name Description
unknownFields UnknownFieldSet
Returns
Type Description
PostalAddress.Builder
Overrides

setAddressLines(int index, String value)

public PostalAddress.Builder setAddressLines(int index, String value)

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Parameters
Name Description
index int

The index to set the value at.
value String

The addressLines to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setAdministrativeArea(String value)

public PostalAddress.Builder setAdministrativeArea(String value)

Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (e.g. "Barcelona" and not "Catalonia"). Many countries don't use an administrative area in postal addresses. E.g. in Switzerland this should be left unpopulated.

string administrative_area = 6;

Parameter
Name Description
value String

The administrativeArea to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setAdministrativeAreaBytes(ByteString value)

public PostalAddress.Builder setAdministrativeAreaBytes(ByteString value)

Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (e.g. "Barcelona" and not "Catalonia"). Many countries don't use an administrative area in postal addresses. E.g. in Switzerland this should be left unpopulated.

string administrative_area = 6;

Parameter
Name Description
value ByteString

The bytes for administrativeArea to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setField(Descriptors.FieldDescriptor field, Object value)

public PostalAddress.Builder setField(Descriptors.FieldDescriptor field, Object value)
Parameters
Name Description
field FieldDescriptor
value Object
Returns
Type Description
PostalAddress.Builder
Overrides

setLanguageCode(String value)

public PostalAddress.Builder setLanguageCode(String value)

Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address' country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations.

If this value is not known, it should be omitted (rather than specifying a possibly incorrect default).

Examples: "zh-Hant", "ja", "ja-Latn", "en".

string language_code = 3;

Parameter
Name Description
value String

The languageCode to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setLanguageCodeBytes(ByteString value)

public PostalAddress.Builder setLanguageCodeBytes(ByteString value)

Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address' country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations.

If this value is not known, it should be omitted (rather than specifying a possibly incorrect default).

Examples: "zh-Hant", "ja", "ja-Latn", "en".

string language_code = 3;

Parameter
Name Description
value ByteString

The bytes for languageCode to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setLocality(String value)

public PostalAddress.Builder setLocality(String value)

Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.

string locality = 7;

Parameter
Name Description
value String

The locality to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setLocalityBytes(ByteString value)

public PostalAddress.Builder setLocalityBytes(ByteString value)

Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.

string locality = 7;

Parameter
Name Description
value ByteString

The bytes for locality to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setOrganization(String value)

public PostalAddress.Builder setOrganization(String value)

Optional. The name of the organization at the address.

string organization = 11;

Parameter
Name Description
value String

The organization to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setOrganizationBytes(ByteString value)

public PostalAddress.Builder setOrganizationBytes(ByteString value)

Optional. The name of the organization at the address.

string organization = 11;

Parameter
Name Description
value ByteString

The bytes for organization to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setPostalCode(String value)

public PostalAddress.Builder setPostalCode(String value)

Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (e.g. state/zip validation in the U.S.A.).

string postal_code = 4;

Parameter
Name Description
value String

The postalCode to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setPostalCodeBytes(ByteString value)

public PostalAddress.Builder setPostalCodeBytes(ByteString value)

Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (e.g. state/zip validation in the U.S.A.).

string postal_code = 4;

Parameter
Name Description
value ByteString

The bytes for postalCode to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setRecipients(int index, String value)

public PostalAddress.Builder setRecipients(int index, String value)

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Parameters
Name Description
index int

The index to set the value at.
value String

The recipients to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setRegionCode(String value)

public PostalAddress.Builder setRegionCode(String value)

Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See http://cldr.unicode.org/ and http://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: "CH" for Switzerland.

string region_code = 2;

Parameter
Name Description
value String

The regionCode to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setRegionCodeBytes(ByteString value)

public PostalAddress.Builder setRegionCodeBytes(ByteString value)

Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See http://cldr.unicode.org/ and http://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: "CH" for Switzerland.

string region_code = 2;

Parameter
Name Description
value ByteString

The bytes for regionCode to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

public PostalAddress.Builder setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)
Parameters
Name Description
field FieldDescriptor
index int
value Object
Returns
Type Description
PostalAddress.Builder
Overrides

setRevision(int value)

public PostalAddress.Builder setRevision(int value)

The schema revision of the PostalAddress. This must be set to 0, which is the latest revision.

All new revisions must be backward compatible with old revisions.

int32 revision = 1;

Parameter
Name Description
value int

The revision to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setSortingCode(String value)

public PostalAddress.Builder setSortingCode(String value)

Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like "CEDEX", optionally followed by a number (e.g. "CEDEX 7"), or just a number alone, representing the "sector code" (Jamaica), "delivery area indicator" (Malawi) or "post office indicator" (e.g. Côte d'Ivoire).

string sorting_code = 5;

Parameter
Name Description
value String

The sortingCode to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setSortingCodeBytes(ByteString value)

public PostalAddress.Builder setSortingCodeBytes(ByteString value)

Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like "CEDEX", optionally followed by a number (e.g. "CEDEX 7"), or just a number alone, representing the "sector code" (Jamaica), "delivery area indicator" (Malawi) or "post office indicator" (e.g. Côte d'Ivoire).

string sorting_code = 5;

Parameter
Name Description
value ByteString

The bytes for sortingCode to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setSublocality(String value)

public PostalAddress.Builder setSublocality(String value)

Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.

string sublocality = 8;

Parameter
Name Description
value String

The sublocality to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setSublocalityBytes(ByteString value)

public PostalAddress.Builder setSublocalityBytes(ByteString value)

Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.

string sublocality = 8;

Parameter
Name Description
value ByteString

The bytes for sublocality to set.
Returns
Type Description
PostalAddress.Builder

This builder for chaining.

setUnknownFields(UnknownFieldSet unknownFields)

public final PostalAddress.Builder setUnknownFields(UnknownFieldSet unknownFields)
Parameter
Name Description
unknownFields UnknownFieldSet
Returns
Type Description
PostalAddress.Builder
Overrides