Interface PostalAddressOrBuilder (2.32.0)

public interface PostalAddressOrBuilder extends MessageOrBuilder

Implements

MessageOrBuilder

Methods

getAddressLines(int index)

public abstract String getAddressLines(int index)

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Parameter
NameDescription
indexint

The index of the element to return.

Returns
TypeDescription
String

The addressLines at the given index.

getAddressLinesBytes(int index)

public abstract ByteString getAddressLinesBytes(int index)

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Parameter
NameDescription
indexint

The index of the value to return.

Returns
TypeDescription
ByteString

The bytes of the addressLines at the given index.

getAddressLinesCount()

public abstract int getAddressLinesCount()

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Returns
TypeDescription
int

The count of addressLines.

getAddressLinesList()

public abstract List<String> getAddressLinesList()

Unstructured address lines describing the lower levels of an address.

Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (e.g. "Austin, TX"), it is important that the line order is clear. The order of address lines should be "envelope order" for the country/region of the address. In places where this can vary (e.g. Japan), address_language is used to make it explicit (e.g. "ja" for large-to-small ordering and "ja-Latn" or "en" for small-to-large). This way, the most specific line of an address can be selected based on the language.

The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved.

Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).

repeated string address_lines = 9;

Returns
TypeDescription
List<String>

A list containing the addressLines.

getAdministrativeArea()

public abstract String getAdministrativeArea()

Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (e.g. "Barcelona" and not "Catalonia"). Many countries don't use an administrative area in postal addresses. E.g. in Switzerland this should be left unpopulated.

string administrative_area = 6;

Returns
TypeDescription
String

The administrativeArea.

getAdministrativeAreaBytes()

public abstract ByteString getAdministrativeAreaBytes()

Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (e.g. "Barcelona" and not "Catalonia"). Many countries don't use an administrative area in postal addresses. E.g. in Switzerland this should be left unpopulated.

string administrative_area = 6;

Returns
TypeDescription
ByteString

The bytes for administrativeArea.

getLanguageCode()

public abstract String getLanguageCode()

Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address' country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations.

If this value is not known, it should be omitted (rather than specifying a possibly incorrect default).

Examples: "zh-Hant", "ja", "ja-Latn", "en".

string language_code = 3;

Returns
TypeDescription
String

The languageCode.

getLanguageCodeBytes()

public abstract ByteString getLanguageCodeBytes()

Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address' country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations.

If this value is not known, it should be omitted (rather than specifying a possibly incorrect default).

Examples: "zh-Hant", "ja", "ja-Latn", "en".

string language_code = 3;

Returns
TypeDescription
ByteString

The bytes for languageCode.

getLocality()

public abstract String getLocality()

Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.

string locality = 7;

Returns
TypeDescription
String

The locality.

getLocalityBytes()

public abstract ByteString getLocalityBytes()

Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.

string locality = 7;

Returns
TypeDescription
ByteString

The bytes for locality.

getOrganization()

public abstract String getOrganization()

Optional. The name of the organization at the address.

string organization = 11;

Returns
TypeDescription
String

The organization.

getOrganizationBytes()

public abstract ByteString getOrganizationBytes()

Optional. The name of the organization at the address.

string organization = 11;

Returns
TypeDescription
ByteString

The bytes for organization.

getPostalCode()

public abstract String getPostalCode()

Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (e.g. state/zip validation in the U.S.A.).

string postal_code = 4;

Returns
TypeDescription
String

The postalCode.

getPostalCodeBytes()

public abstract ByteString getPostalCodeBytes()

Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (e.g. state/zip validation in the U.S.A.).

string postal_code = 4;

Returns
TypeDescription
ByteString

The bytes for postalCode.

getRecipients(int index)

public abstract String getRecipients(int index)

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Parameter
NameDescription
indexint

The index of the element to return.

Returns
TypeDescription
String

The recipients at the given index.

getRecipientsBytes(int index)

public abstract ByteString getRecipientsBytes(int index)

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Parameter
NameDescription
indexint

The index of the value to return.

Returns
TypeDescription
ByteString

The bytes of the recipients at the given index.

getRecipientsCount()

public abstract int getRecipientsCount()

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Returns
TypeDescription
int

The count of recipients.

getRecipientsList()

public abstract List<String> getRecipientsList()

Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain "care of" information.

repeated string recipients = 10;

Returns
TypeDescription
List<String>

A list containing the recipients.

getRegionCode()

public abstract String getRegionCode()

Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See http://cldr.unicode.org/ and http://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: "CH" for Switzerland.

string region_code = 2;

Returns
TypeDescription
String

The regionCode.

getRegionCodeBytes()

public abstract ByteString getRegionCodeBytes()

Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See http://cldr.unicode.org/ and http://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: "CH" for Switzerland.

string region_code = 2;

Returns
TypeDescription
ByteString

The bytes for regionCode.

getRevision()

public abstract int getRevision()

The schema revision of the PostalAddress. This must be set to 0, which is the latest revision.

All new revisions must be backward compatible with old revisions.

int32 revision = 1;

Returns
TypeDescription
int

The revision.

getSortingCode()

public abstract String getSortingCode()

Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like "CEDEX", optionally followed by a number (e.g. "CEDEX 7"), or just a number alone, representing the "sector code" (Jamaica), "delivery area indicator" (Malawi) or "post office indicator" (e.g. Côte d'Ivoire).

string sorting_code = 5;

Returns
TypeDescription
String

The sortingCode.

getSortingCodeBytes()

public abstract ByteString getSortingCodeBytes()

Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like "CEDEX", optionally followed by a number (e.g. "CEDEX 7"), or just a number alone, representing the "sector code" (Jamaica), "delivery area indicator" (Malawi) or "post office indicator" (e.g. Côte d'Ivoire).

string sorting_code = 5;

Returns
TypeDescription
ByteString

The bytes for sortingCode.

getSublocality()

public abstract String getSublocality()

Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.

string sublocality = 8;

Returns
TypeDescription
String

The sublocality.

getSublocalityBytes()

public abstract ByteString getSublocalityBytes()

Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.

string sublocality = 8;

Returns
TypeDescription
ByteString

The bytes for sublocality.