Class AppEngineHttpRequest.Builder (2.16.0)

public static final class AppEngineHttpRequest.Builder extends GeneratedMessageV3.Builder<AppEngineHttpRequest.Builder> implements AppEngineHttpRequestOrBuilder

App Engine HTTP request. The message defines the HTTP request that is sent to an App Engine app when the task is dispatched. This proto can only be used for tasks in a queue which has app_engine_http_target set. Using AppEngineHttpRequest requires appengine.applications.get Google IAM permission for the project and the following scope: https://www.googleapis.com/auth/cloud-platform The task will be delivered to the App Engine app which belongs to the same project as the queue. For more information, see How Requests are Routed and how routing is affected by dispatch files. Traffic is encrypted during transport and never leaves Google datacenters. Because this traffic is carried over a communication mechanism internal to Google, you cannot explicitly set the protocol (for example, HTTP or HTTPS). The request to the handler, however, will appear to have used the HTTP protocol. The AppEngineRouting used to construct the URL that the task is delivered to can be set at the queue-level or task-level:

  • If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing. The url that the task will be sent to is:
  • url = host + relative_url Tasks can be dispatched to secure app handlers, unsecure app handlers, and URIs restricted with login: admin. Because tasks are not run as any user, they cannot be dispatched to URIs restricted with login: required Task dispatches also do not follow redirects. The task attempt has succeeded if the app's request handler returns an HTTP response code in the range [200 - 299]. The task attempt has failed if the app's handler returns a non-2xx response code or Cloud Tasks does not receive response before the deadline. Failed tasks will be retried according to the retry configuration. 503 (Service Unavailable) is considered an App Engine system error instead of an application error and will cause Cloud Tasks' traffic congestion control to temporarily throttle the queue's dispatches. Unlike other types of task targets, a 429 (Too Many Requests) response from an app handler does not cause traffic congestion control to throttle the queue.

Protobuf type google.cloud.tasks.v2beta2.AppEngineHttpRequest

Static Methods

getDescriptor()

public static final Descriptors.Descriptor getDescriptor()
Returns
TypeDescription
Descriptor

Methods

addRepeatedField(Descriptors.FieldDescriptor field, Object value)

public AppEngineHttpRequest.Builder addRepeatedField(Descriptors.FieldDescriptor field, Object value)
Parameters
NameDescription
fieldFieldDescriptor
valueObject
Returns
TypeDescription
AppEngineHttpRequest.Builder
Overrides

build()

public AppEngineHttpRequest build()
Returns
TypeDescription
AppEngineHttpRequest

buildPartial()

public AppEngineHttpRequest buildPartial()
Returns
TypeDescription
AppEngineHttpRequest

clear()

public AppEngineHttpRequest.Builder clear()
Returns
TypeDescription
AppEngineHttpRequest.Builder
Overrides

clearAppEngineRouting()

public AppEngineHttpRequest.Builder clearAppEngineRouting()

Task-level setting for App Engine routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

.google.cloud.tasks.v2beta2.AppEngineRouting app_engine_routing = 2;

Returns
TypeDescription
AppEngineHttpRequest.Builder

clearField(Descriptors.FieldDescriptor field)

public AppEngineHttpRequest.Builder clearField(Descriptors.FieldDescriptor field)
Parameter
NameDescription
fieldFieldDescriptor
Returns
TypeDescription
AppEngineHttpRequest.Builder
Overrides

clearHeaders()

public AppEngineHttpRequest.Builder clearHeaders()
Returns
TypeDescription
AppEngineHttpRequest.Builder

clearHttpMethod()

public AppEngineHttpRequest.Builder clearHttpMethod()

The HTTP method to use for the request. The default is POST. The app's request handler for the task's target URL must be able to handle HTTP requests with this http_method, otherwise the task attempt fails with error code 405 (Method Not Allowed). See Writing a push task request handler and the App Engine documentation for your runtime on How Requests are Handled.

.google.cloud.tasks.v2beta2.HttpMethod http_method = 1;

Returns
TypeDescription
AppEngineHttpRequest.Builder

This builder for chaining.

clearOneof(Descriptors.OneofDescriptor oneof)

public AppEngineHttpRequest.Builder clearOneof(Descriptors.OneofDescriptor oneof)
Parameter
NameDescription
oneofOneofDescriptor
Returns
TypeDescription
AppEngineHttpRequest.Builder
Overrides

clearPayload()

public AppEngineHttpRequest.Builder clearPayload()

Payload. The payload will be sent as the HTTP message body. A message body, and thus a payload, is allowed only if the HTTP method is POST or PUT. It is an error to set a data payload on a task with an incompatible HttpMethod.

bytes payload = 5;

Returns
TypeDescription
AppEngineHttpRequest.Builder

This builder for chaining.

clearRelativeUrl()

public AppEngineHttpRequest.Builder clearRelativeUrl()

The relative URL. The relative URL must begin with "/" and must be a valid HTTP relative URL. It can contain a path and query string arguments. If the relative URL is empty, then the root path "/" will be used. No spaces are allowed, and the maximum length allowed is 2083 characters.

string relative_url = 3;

Returns
TypeDescription
AppEngineHttpRequest.Builder

This builder for chaining.

clone()

public AppEngineHttpRequest.Builder clone()
Returns
TypeDescription
AppEngineHttpRequest.Builder
Overrides

containsHeaders(String key)

public boolean containsHeaders(String key)

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values:

  • User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a payload, Cloud Tasks sets the following headers:
  • Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json".
  • Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden:
  • Host
  • X-Google-*
  • X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

map<string, string> headers = 4;

Parameter
NameDescription
keyString
Returns
TypeDescription
boolean

getAppEngineRouting()

public AppEngineRouting getAppEngineRouting()

Task-level setting for App Engine routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

.google.cloud.tasks.v2beta2.AppEngineRouting app_engine_routing = 2;

Returns
TypeDescription
AppEngineRouting

The appEngineRouting.

getAppEngineRoutingBuilder()

public AppEngineRouting.Builder getAppEngineRoutingBuilder()

Task-level setting for App Engine routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

.google.cloud.tasks.v2beta2.AppEngineRouting app_engine_routing = 2;

Returns
TypeDescription
AppEngineRouting.Builder

getAppEngineRoutingOrBuilder()

public AppEngineRoutingOrBuilder getAppEngineRoutingOrBuilder()

Task-level setting for App Engine routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

.google.cloud.tasks.v2beta2.AppEngineRouting app_engine_routing = 2;

Returns
TypeDescription
AppEngineRoutingOrBuilder

getDefaultInstanceForType()

public AppEngineHttpRequest getDefaultInstanceForType()
Returns
TypeDescription
AppEngineHttpRequest

getDescriptorForType()

public Descriptors.Descriptor getDescriptorForType()
Returns
TypeDescription
Descriptor
Overrides

getHeaders()

public Map<String,String> getHeaders()

Use #getHeadersMap() instead.

Returns
TypeDescription
Map<String,String>

getHeadersCount()

public int getHeadersCount()

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values:

  • User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a payload, Cloud Tasks sets the following headers:
  • Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json".
  • Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden:
  • Host
  • X-Google-*
  • X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

map<string, string> headers = 4;

Returns
TypeDescription
int

getHeadersMap()

public Map<String,String> getHeadersMap()

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values:

  • User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a payload, Cloud Tasks sets the following headers:
  • Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json".
  • Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden:
  • Host
  • X-Google-*
  • X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

map<string, string> headers = 4;

Returns
TypeDescription
Map<String,String>

getHeadersOrDefault(String key, String defaultValue)

public String getHeadersOrDefault(String key, String defaultValue)

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values:

  • User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a payload, Cloud Tasks sets the following headers:
  • Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json".
  • Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden:
  • Host
  • X-Google-*
  • X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

map<string, string> headers = 4;

Parameters
NameDescription
keyString
defaultValueString
Returns
TypeDescription
String

getHeadersOrThrow(String key)

public String getHeadersOrThrow(String key)

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values:

  • User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a payload, Cloud Tasks sets the following headers:
  • Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json".
  • Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden:
  • Host
  • X-Google-*
  • X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

map<string, string> headers = 4;

Parameter
NameDescription
keyString
Returns
TypeDescription
String

getHttpMethod()

public HttpMethod getHttpMethod()

The HTTP method to use for the request. The default is POST. The app's request handler for the task's target URL must be able to handle HTTP requests with this http_method, otherwise the task attempt fails with error code 405 (Method Not Allowed). See Writing a push task request handler and the App Engine documentation for your runtime on How Requests are Handled.

.google.cloud.tasks.v2beta2.HttpMethod http_method = 1;

Returns
TypeDescription
HttpMethod

The httpMethod.

getHttpMethodValue()

public int getHttpMethodValue()

The HTTP method to use for the request. The default is POST. The app's request handler for the task's target URL must be able to handle HTTP requests with this http_method, otherwise the task attempt fails with error code 405 (Method Not Allowed). See Writing a push task request handler and the App Engine documentation for your runtime on How Requests are Handled.

.google.cloud.tasks.v2beta2.HttpMethod http_method = 1;

Returns
TypeDescription
int

The enum numeric value on the wire for httpMethod.

getMutableHeaders()

public Map<String,String> getMutableHeaders()

Use alternate mutation accessors instead.

Returns
TypeDescription
Map<String,String>

getPayload()

public ByteString getPayload()

Payload. The payload will be sent as the HTTP message body. A message body, and thus a payload, is allowed only if the HTTP method is POST or PUT. It is an error to set a data payload on a task with an incompatible HttpMethod.

bytes payload = 5;

Returns
TypeDescription
ByteString

The payload.

getRelativeUrl()

public String getRelativeUrl()

The relative URL. The relative URL must begin with "/" and must be a valid HTTP relative URL. It can contain a path and query string arguments. If the relative URL is empty, then the root path "/" will be used. No spaces are allowed, and the maximum length allowed is 2083 characters.

string relative_url = 3;

Returns
TypeDescription
String

The relativeUrl.

getRelativeUrlBytes()

public ByteString getRelativeUrlBytes()

The relative URL. The relative URL must begin with "/" and must be a valid HTTP relative URL. It can contain a path and query string arguments. If the relative URL is empty, then the root path "/" will be used. No spaces are allowed, and the maximum length allowed is 2083 characters.

string relative_url = 3;

Returns
TypeDescription
ByteString

The bytes for relativeUrl.

hasAppEngineRouting()

public boolean hasAppEngineRouting()

Task-level setting for App Engine routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

.google.cloud.tasks.v2beta2.AppEngineRouting app_engine_routing = 2;

Returns
TypeDescription
boolean

Whether the appEngineRouting field is set.

internalGetFieldAccessorTable()

protected GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
Returns
TypeDescription
FieldAccessorTable
Overrides

internalGetMapField(int number)

protected MapField internalGetMapField(int number)
Parameter
NameDescription
numberint
Returns
TypeDescription
MapField
Overrides

internalGetMutableMapField(int number)

protected MapField internalGetMutableMapField(int number)
Parameter
NameDescription
numberint
Returns
TypeDescription
MapField
Overrides

isInitialized()

public final boolean isInitialized()
Returns
TypeDescription
boolean
Overrides

mergeAppEngineRouting(AppEngineRouting value)

public AppEngineHttpRequest.Builder mergeAppEngineRouting(AppEngineRouting value)

Task-level setting for App Engine routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

.google.cloud.tasks.v2beta2.AppEngineRouting app_engine_routing = 2;

Parameter
NameDescription
valueAppEngineRouting
Returns
TypeDescription
AppEngineHttpRequest.Builder

mergeFrom(AppEngineHttpRequest other)

public AppEngineHttpRequest.Builder mergeFrom(AppEngineHttpRequest other)
Parameter
NameDescription
otherAppEngineHttpRequest
Returns
TypeDescription
AppEngineHttpRequest.Builder

mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

public AppEngineHttpRequest.Builder mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)
Parameters
NameDescription
inputCodedInputStream
extensionRegistryExtensionRegistryLite
Returns
TypeDescription
AppEngineHttpRequest.Builder
Overrides
Exceptions
TypeDescription
IOException

mergeFrom(Message other)

public AppEngineHttpRequest.Builder mergeFrom(Message other)
Parameter
NameDescription
otherMessage
Returns
TypeDescription
AppEngineHttpRequest.Builder
Overrides

mergeUnknownFields(UnknownFieldSet unknownFields)

public final AppEngineHttpRequest.Builder mergeUnknownFields(UnknownFieldSet unknownFields)
Parameter
NameDescription
unknownFieldsUnknownFieldSet
Returns
TypeDescription
AppEngineHttpRequest.Builder
Overrides

putAllHeaders(Map<String,String> values)

public AppEngineHttpRequest.Builder putAllHeaders(Map<String,String> values)

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values:

  • User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a payload, Cloud Tasks sets the following headers:
  • Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json".
  • Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden:
  • Host
  • X-Google-*
  • X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

map<string, string> headers = 4;

Parameter
NameDescription
valuesMap<String,String>
Returns
TypeDescription
AppEngineHttpRequest.Builder

putHeaders(String key, String value)

public AppEngineHttpRequest.Builder putHeaders(String key, String value)

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values:

  • User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a payload, Cloud Tasks sets the following headers:
  • Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json".
  • Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden:
  • Host
  • X-Google-*
  • X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

map<string, string> headers = 4;

Parameters
NameDescription
keyString
valueString
Returns
TypeDescription
AppEngineHttpRequest.Builder

removeHeaders(String key)

public AppEngineHttpRequest.Builder removeHeaders(String key)

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. Repeated headers are not supported but a header value can contain commas. Cloud Tasks sets some headers to default values:

  • User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Tasks will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent. If the task has a payload, Cloud Tasks sets the following headers:
  • Content-Type: By default, the Content-Type header is set to "application/octet-stream". The default can be overridden by explicitly setting Content-Type to a particular media type when the task is created. For example, Content-Type can be set to "application/json".
  • Content-Length: This is computed by Cloud Tasks. This value is output only. It cannot be changed. The headers below cannot be set or overridden:
  • Host
  • X-Google-*
  • X-AppEngine-* In addition, Cloud Tasks sets some headers when the task is dispatched, such as headers containing information about the task; see request headers. These headers are set only when the task is dispatched, so they are not visible when the task is returned in a Cloud Tasks response. Although there is no specific limit for the maximum number of headers or the size, there is a limit on the maximum size of the Task. For more information, see the CreateTask documentation.

map<string, string> headers = 4;

Parameter
NameDescription
keyString
Returns
TypeDescription
AppEngineHttpRequest.Builder

setAppEngineRouting(AppEngineRouting value)

public AppEngineHttpRequest.Builder setAppEngineRouting(AppEngineRouting value)

Task-level setting for App Engine routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

.google.cloud.tasks.v2beta2.AppEngineRouting app_engine_routing = 2;

Parameter
NameDescription
valueAppEngineRouting
Returns
TypeDescription
AppEngineHttpRequest.Builder

setAppEngineRouting(AppEngineRouting.Builder builderForValue)

public AppEngineHttpRequest.Builder setAppEngineRouting(AppEngineRouting.Builder builderForValue)

Task-level setting for App Engine routing. If set, app_engine_routing_override is used for all tasks in the queue, no matter what the setting is for the task-level app_engine_routing.

.google.cloud.tasks.v2beta2.AppEngineRouting app_engine_routing = 2;

Parameter
NameDescription
builderForValueAppEngineRouting.Builder
Returns
TypeDescription
AppEngineHttpRequest.Builder

setField(Descriptors.FieldDescriptor field, Object value)

public AppEngineHttpRequest.Builder setField(Descriptors.FieldDescriptor field, Object value)
Parameters
NameDescription
fieldFieldDescriptor
valueObject
Returns
TypeDescription
AppEngineHttpRequest.Builder
Overrides

setHttpMethod(HttpMethod value)

public AppEngineHttpRequest.Builder setHttpMethod(HttpMethod value)

The HTTP method to use for the request. The default is POST. The app's request handler for the task's target URL must be able to handle HTTP requests with this http_method, otherwise the task attempt fails with error code 405 (Method Not Allowed). See Writing a push task request handler and the App Engine documentation for your runtime on How Requests are Handled.

.google.cloud.tasks.v2beta2.HttpMethod http_method = 1;

Parameter
NameDescription
valueHttpMethod

The httpMethod to set.

Returns
TypeDescription
AppEngineHttpRequest.Builder

This builder for chaining.

setHttpMethodValue(int value)

public AppEngineHttpRequest.Builder setHttpMethodValue(int value)

The HTTP method to use for the request. The default is POST. The app's request handler for the task's target URL must be able to handle HTTP requests with this http_method, otherwise the task attempt fails with error code 405 (Method Not Allowed). See Writing a push task request handler and the App Engine documentation for your runtime on How Requests are Handled.

.google.cloud.tasks.v2beta2.HttpMethod http_method = 1;

Parameter
NameDescription
valueint

The enum numeric value on the wire for httpMethod to set.

Returns
TypeDescription
AppEngineHttpRequest.Builder

This builder for chaining.

setPayload(ByteString value)

public AppEngineHttpRequest.Builder setPayload(ByteString value)

Payload. The payload will be sent as the HTTP message body. A message body, and thus a payload, is allowed only if the HTTP method is POST or PUT. It is an error to set a data payload on a task with an incompatible HttpMethod.

bytes payload = 5;

Parameter
NameDescription
valueByteString

The payload to set.

Returns
TypeDescription
AppEngineHttpRequest.Builder

This builder for chaining.

setRelativeUrl(String value)

public AppEngineHttpRequest.Builder setRelativeUrl(String value)

The relative URL. The relative URL must begin with "/" and must be a valid HTTP relative URL. It can contain a path and query string arguments. If the relative URL is empty, then the root path "/" will be used. No spaces are allowed, and the maximum length allowed is 2083 characters.

string relative_url = 3;

Parameter
NameDescription
valueString

The relativeUrl to set.

Returns
TypeDescription
AppEngineHttpRequest.Builder

This builder for chaining.

setRelativeUrlBytes(ByteString value)

public AppEngineHttpRequest.Builder setRelativeUrlBytes(ByteString value)

The relative URL. The relative URL must begin with "/" and must be a valid HTTP relative URL. It can contain a path and query string arguments. If the relative URL is empty, then the root path "/" will be used. No spaces are allowed, and the maximum length allowed is 2083 characters.

string relative_url = 3;

Parameter
NameDescription
valueByteString

The bytes for relativeUrl to set.

Returns
TypeDescription
AppEngineHttpRequest.Builder

This builder for chaining.

setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

public AppEngineHttpRequest.Builder setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)
Parameters
NameDescription
fieldFieldDescriptor
indexint
valueObject
Returns
TypeDescription
AppEngineHttpRequest.Builder
Overrides

setUnknownFields(UnknownFieldSet unknownFields)

public final AppEngineHttpRequest.Builder setUnknownFields(UnknownFieldSet unknownFields)
Parameter
NameDescription
unknownFieldsUnknownFieldSet
Returns
TypeDescription
AppEngineHttpRequest.Builder
Overrides