Replicate data between AlloyDB Omni and other databases

This page provides steps to replicate data between AlloyDB Omni and other databases using the pglogical extension.

The information on this page applies only to single-server deployments of AlloyDB Omni. It does not apply to Kubernetes-based AlloyDB Omni deployments.

For more information, see pglogical on AlloyDB Omni.

For more information about various components of the pglogical extension, see pglogical terminology and fundamental components.

Supported authentication methods

The two main authentication methods used with the pglogical extension are password and trust authentication methods.

The recommended authentication method is trust authentication method. For more information, see Supported authentication methods.

Note: The trust authentication method is not available for cloud provider's managed-service database, such as Amazon Aurora as the non-AlloyDB source. For those connections, use the password authentication method.

Before you begin

You can install pglogical as an extension within a given database.

Before implementing the pglogical extension on AlloyDB Omni, ensure that you meet the following system requirements:

• Access to your non-AlloyDB PostgreSQL cluster as a superuser.
• The pglogical extension is installed in your non-AlloyDB PostgreSQL cluster. For release and distribution-specific installation instructions, see the pglogical.
• An AlloyDB Omni server installed and configured. For instructions on how to install AlloyDB Omni, see Install AlloyDB Omni.
• The IP addresses for both the non-AlloyDB PostgreSQL cluster and the AlloyDB Omni host server.
• An established and secured network between the non-AlloyDB PostgreSQL cluster and the AlloyDB Omni host server. TCP connectivity on the standard PostgreSQL port of 5432 is required.

Adjust parameters on the non-AlloyDB provider

1. Set the wal_level parameter to logical, and append pglogical to the shared_preload_libraries parameter in the postgresql.conf file. The pglogical extension requires a minimal set of parameter adjustments on the non-AlloyDB provider cluster.

   cp postgresql.conf postgresql.bak
   sed -r -i "s|(\#)?wal_level\s*=.*|wal_level=logical|" postgresql.conf
   sed -r -i "s|(\#)?(shared_preload_libraries\s*=\s*)'(.*)'.*$|\2'\3,pglogical'|" postgresql.conf
   sed -r -i "s|',|'|" postgresql.conf
   

2. Verify that the parameters are properly set:

   grep -iE 'wal_level|shared_preload_libraries' postgresql.conf
   

3. Restart your non-AlloyDB cluster for the parameter changes to take effect.

   Other parameters might be already set to sufficient values or might require adjusting depending on your non-AlloyDB distribution and version.

   Check the following parameters:

   • max_worker_processes: one per provider database and at least one per subscriber node. At least 10 is the standard for this parameter.
   • max_replication_slots: one per node on provider nodes.
   • max_wal_senders: one per node on provider nodes.
   • track_commit_timestamp: set to on if the last or first update wins conflict resolution is required.
   • listen_addresses: must include the AlloyDB Omni IP address or mention through a covering CIDR block.

4. (Optional) If your non-AlloyDB provider is Amazon RDS or Aurora, then the pglogical extension must be enabled and the required parameters adjusted through cluster parameter group adjustments.

   1. Within an existing or new cluster parameter group, set the following parameters:

      • rds.logical_replication to 1
      • max_replication_slots to 50
      • max_wal_senders to 50
      • max_worker_processes to 64
      • shared_preload_libraries to pg_stat_statements, pglogical

   2. Restart your Amazon RDS or Aurora cluster for the cluster parameter group adjustments to take effect.

5. Confirm all parameter values are relevant:

   SELECT name, setting
   FROM pg_catalog.pg_settings
    WHERE name IN ('listen_addresses',
                   'wal_level',
                   'shared_preload_libraries',
                   'max_worker_processes',
                   'max_replication_slots',
                   'max_wal_senders',
                   'track_commit_timestamp')
    ORDER BY name;
   

Host-based authentication adjustments to the non-AlloyDB Omni provider cluster

The pglogical makes local TCP connections to the provider database. Therefore, you must add the host server's IP address to the AlloyDB Omni pg_hba.conf file.

1. Add a trust authentication entry for the local server, specific to a new pglogical_replication user, to the pg_hba.conf file.

   Important: If you prefer to use password authentication, remove the trust values and replace them with scram-sha-256.

   Additionally, subscriber nodes must be able to authenticate against the provider nodes. Add either each subscriber node's IP address or the appropriate CIDR block IP range to the pg_hba.conf file:

   echo -e "# pglogical entries:
   host all pglogical_replication samehost trust
   host all pglogical_replication SERVER_IP_ADDRESS/32 trust
   " | column -t | sudo tee -a pg_hba.conf
   

   Note: Specify and limit connections to the exact database names instead of all. Also, restrict the CIRD block IP ranges by specifying the subscriber node IP addresses, such as /32 instead of IP ranges.

2. Verify that the entries are correct:

   tail -3 pg_hba.conf
   

3. Restart your non-AlloyDB cluster for the parameter changes to take effect.

Note: Cloud managed services PostgreSQL databases such as Amazon RDS or Aurora usually do not permit manual adjustments or customization to the pg_hba.conf file. In some cases, either no adjustments are required, or firewall and routing adjustments are required.

Adjust parameters to the AlloyDB Omni subscriber cluster

The pglogical requires a minimal set of parameter adjustments on the AlloyDB Omni subscriber cluster too. You must append pglogical to the shared_preload_libraries parameter in the /var/alloydb/config/postgresql.conf file. If any database within the cluster acts as a provider database, then make the parameter changes required for provider databases.

1. Adjust the parameters:

   sudo sed -r -i "s|(shared_preload_libraries\s*=\s*)'(.*)'.*$|\1'\2,pglogical'|" /var/alloydb/config/postgresql.conf
   

2. Verify that the parameter is set properly:

   grep -iE 'shared_preload_libraries' /var/alloydb/config/postgresql.conf
   

3. Restart AlloyDB Omni for the parameter change to take effect:

   sudo alloydb database-server stop
   sudo alloydb database-server start
   

4. Set the AlloyDB Omni default values for other provider database parameters:

   • max_worker_processes: One per provider database and one per subscriber node.
   • track_commit_timestamp: Set to on if the last/first update wins conflict resolution is required.

5. Confirm all parameter values are relevant:

   docker exec pg-service psql -h localhost -U postgres -c "
   SELECT name, setting
     FROM pg_catalog.pg_settings
    WHERE name IN ('listen_addresses',
                   'wal_level',
                   'shared_preload_libraries',
                   'max_worker_processes',
                   'max_replication_slots',
                   'max_wal_senders',
                   'track_commit_timestamp')
        ORDER BY name;
   "
   

Host-based authentication adjustments to the AlloyDB Omni subscriber cluster

The pglogical makes local TCP connections to the AlloyDB Omni subscriber database. Therefore, you must add the subscriber's host server's IP address to the AlloyDB Omni /var/alloydb/config/pg_hba.conf file.

1. Add a trust authentication entry for the local server, specific to a new pglogical_replication user, to the /var/alloydb/config/pg_hba.conf file:

   echo -e "# pglogical entries:
   host all pglogical_replication samehost trust
   " | column -t | sudo tee -a /var/alloydb/config/pg_hba.conf
   

   Note: Specify and limit connections to the exact database names instead of all.

2. Verify that the entry is correct:

   tail -2 /var/alloydb/config/pg_hba.conf
   

3. Restart AlloyDB Omni for the authentication change to take effect:

   sudo alloydb database-server stop
   sudo alloydb database-server start
   

Create a pglogical user in both provider and subscriber clusters

You must create a new user in both the provider and subscriber cluster. pglogical requires the user to have both the superuser and replication attributes.

1. In the Google Cloud AlloyDB provider cluster, create the user role:

   CREATE USER pglogical_replication LOGIN PASSWORD 'secret';
   ALTER USER pglogical_replication WITH replication;
   ALTER USER pglogical_replication WITH superuser;
   

2. (Optional) If your non-AlloyDB provider is Amazon RDS or Aurora, then you must grant the following role:

   GRANT rds_superuser TO replication_user;
   

   Note: If your non-AlloyDB database is from some other cloud-managed service, then a service-specific, custom grant might be required.

Add pglogical and nodes to the non-AlloyDB provider database

1. Grant required privileges.

   You must install the pglogical extension in each database and grant the usage permission to the pglogical database user.

   For example, if your database is my_test_db, run the following command:

   CREATE EXTENSION IF NOT EXISTS pglogical;
   GRANT usage ON SCHEMA pglogical TO pglogical_replication;
   

2. Create a pglogical node for the provider databases. The node_name is arbitrary and the dsn string must be a valid TCP connection back to the same database.

   Important: If you're using a cloud-managed service database, then the password authentication is mandatory. You can choose to use password authentication in your self-managed PostgreSQL deployment. In such cases, include the password in your dsn` string. If you're using a self-managed installation, then you can either use the password or trust authentication.

   For example, for the my_test_db database, run the following command:

   SELECT pglogical.create_node(node_name := 'provider', dsn := 'host=SERVER_IP_ADDRESS port=5432 dbname=my_test_db user=pglogical_replication password=secret');
   

   Note: If your non-AlloyDB provider is Amazon RDS or Aurora, then use the provided AWS endpoint instead of the host IP address in the dsn parameter. If your non-AlloyDB database is from some other cloud-managed service, then a service-specific, endpoint or IP address is required.

Create a table and add it to the default replication set

Create a table and add it to the default replication set on the non-AlloyDB provider database.

1. Create a test table called test_table_1 in the provider database:

   CREATE TABLE test_table_1 (col1 INT PRIMARY KEY);
   INSERT INTO test_table_1 VALUES (1),(2),(3);
   

2. Manually add the test table to the default replication set. You can either create custom pglogical replication sets, or you can use the default replication sets. Several default replication sets such as default, default_insert_only, and ddl_sqlwere created when you created the extension. You can add tables and sequences to the replication sets individually, or all at once for a specified schema.

   -- Add the specified table to the default replication set:
   SELECT pglogical.replication_set_add_table(set_name := 'default', relation := 'test_table_1', synchronize_data := TRUE);
   
   -- Check which tables have been added to all replication sets:
   SELECT * FROM pglogical.replication_set_table;
   

3. (Optional) Add all tables in a specified schema, such as public:

   -- Add all "public" schema tables to the default replication set:
   SELECT pglogical.replication_set_add_all_tables('default', ARRAY['public']);
   
   -- Check which tables have been added to all replication sets:
   SELECT * FROM pglogical.replication_set_table;
   
   -- Add all "public" schema sequences to the default replication:
   SELECT pglogical.replication_set_add_all_sequences('default', ARRAY['public']);
   
   -- Check which sequences have been added to all replication sets:
   SELECT * FROM pglogical.replication_set_seq;
   

4. Remove the table from the default replication set. If there are any tables in the schema that do not have a primary key or a replica identity, then only INSERT statements can be replicated. If you have added those tables to the default replication set automatically through the replication_set_add_all_tables function, then you need to manually remove them from that replication set and add them to the default_insert_only set.

   -- Remove the table from the **default** replication set:
   SELECT pglogical.replication_set_remove_table(set_name := 'default', relation := 'test_table_2');
   
   -- Manually add to the **default_insert_only** replication set:
   SELECT pglogical.replication_set_add_table(set_name := 'default_insert_only', relation := 'test_table_2');
   

   Optionally, if you want to add the newly created tables to the replication set automatically, add the pglogical_assign_repset trigger as suggested in the pglogical source.

Copy the database to the AlloyDB Omni subscriber cluster

1. Create a schema-only backup of the source database using the pg_dump utility.

2. Run the pg_dumpcommand from your AlloyDB Omni subscriber server using the IP address or endpoint of your non-AlloyDB server.

   Note: You must run the pg_dump command from outside of the AlloyDB Omni container. It is recommended that you run the pg_dump command from your AlloyDB Omni host server if you can install the PostgreSQL client. You can also run the command from another server, if necessary. For more information about exporting using pg_dump see Export a DMP file.

   pg_dump -h SERVER_IP_ADDRESS -U postgres --create --schema-only my_test_db > my_test_db.schema-only.sql
   

   Note: If your non-AlloyDB provider is Amazon RDS or Aurora, then use the provided AWS endpoint instead of the host IP address in the dsn parameter. If your non-AlloyDB database is from some other cloud-managed service, then a service-specific, endpoint or IP address is required.

3. Import the backup into the subscriber database on the subscriber AlloyDB Omni server:

   docker exec -i pg-service psql -h localhost -U postgres < my_test_db.schema-only.sql
   

This creates the database and the schema, without any of the row data. Row data is replicated by the pglogical extension. Manually copy or recreate any other users or roles that are required.

Create a node and subscription on the AlloyDB Omni subscriber database

1. Create a node on the AlloyDB Omni subscriber database. Add the password to your dsn if you choose to use password authentication.

   docker exec pg-service psql -h localhost -U postgres -d my_test_db -c "
   SELECT pglogical.create_node(node_name := 'subscriber', dsn := 'host=localhost port=5432 dbname=my_test_db user=pglogical_replication');
   "
   

2. Create a subscription in the subscriber database, pointing back to provider database in the AlloyDB Omni provider server.

   Note: For cloud-managed service PostgreSQL databases, trust authentication is not available. You must include the password argument in the dsn parameter.
   Caution: Ensure that the connection details in the dsn parameter are accurate.

   docker exec pg-service psql -h localhost -U postgres -d my_test_db -c "
   SELECT pglogical.create_subscription(subscription_name := 'test_sub_1', provider_dsn := 'host=SERVER_IP_ADDRESS port=5432 dbname=my_test_db user=pglogical_replication password=secret');
   "
   

   Note: If your non-AlloyDB provider is Amazon RDS or Aurora, then use the provided AWS endpoint instead of the host IP address in the dsnparameter. If your non-AlloyDB database is from some other cloud-managed service, then a service-specific, endpoint or IP address is required.

3. Within a few seconds or minutes, the initial data should have replicated from the provider to the subscriber:

   docker exec pg-service psql -h localhost -U postgres -d my_test_db -c "
   
   SELECT * FROM test_table_1 ORDER BY 1;
   "
   

   Additional rows that are added to the provider database are also replicated in real time within seconds.

Additional pglogical deployment considerations

The pglogical extension has many advanced features that are not covered in this document. Many of these features are applicable to your implementation. You can consider the following advanced features:

• Conflict resolution
• Multimaster and bi-directional replication
• Inclusion of sequences
• Switchover and failover procedures

What's next

• Replicate data between Google Cloud AlloyDB and AlloyDB Omni
• Switchover and failover with pglogical replication