하나 이상의 PAL 채널에 대한 지원금을 요청합니다. PAL 채널에서 지원금을 요청하는 방법에 관한 안내는 CBSD 또는 DP 공급업체에 문의하세요.
CBSD에 유효한 PAL 부여를 요청하면 SAS는 다음 SAS 간 조정된 주기적 활동 (CPAS)에서 자동으로 PPA를 생성합니다. PPA 내 PAL 채널의 다른 운영자의 CBSD에 대한 기존 부여는 CPAS 후 종료됩니다. PPA에 대해 자세히 알아보기
단일 부여에는 PAL 및 GAA 주파수가 모두 포함될 수 없습니다. PAL 채널보다 더 많은 대역폭이 필요한 경우 CBSD 공급업체에 문의하여 PAL 및 GAA 주파수 범위에 대해 별도의 부여를 요청하는 방법을 확인하세요. 다른 운영자는 CBSD의 PAL 부여 옆에 있는 GAA 부여를 간섭으로부터 보호하지 않습니다.
[[["이해하기 쉬움","easyToUnderstand","thumb-up"],["문제가 해결됨","solvedMyProblem","thumb-up"],["기타","otherUp","thumb-up"]],[["이해하기 어려움","hardToUnderstand","thumb-down"],["잘못된 정보 또는 샘플 코드","incorrectInformationOrSampleCode","thumb-down"],["필요한 정보/샘플이 없음","missingTheInformationSamplesINeed","thumb-down"],["번역 문제","translationIssue","thumb-down"],["기타","otherDown","thumb-down"]],["최종 업데이트: 2025-09-04(UTC)"],[],[],null,["# Use Priority Access Licenses\n\nIf you are a\n[Priority Access License (PAL)](/spectrum-access-system/docs/key-terms#pal) licensee,\nyou can use the\n[Google Spectrum Access System (SAS) Portal](/spectrum-access-system/docs/key-terms#sas-portal)\nto do the following:\n\n- Confirm if your PAL is properly registered with [Spectrum Access System (SAS)](/spectrum-access-system/docs/key-terms#sas).\n- Check the geographic areas that are protected from [General Authorized Access (GAA)](/spectrum-access-system/docs/key-terms#gaa) interference for your PAL-protected SASs.\n\n| **Note:** Tier 1 incumbents can temporarily suspend PAL operators as needed. [Learn more about PALs](/spectrum-access-system/docs/pals).\n\nBefore you begin\n----------------\n\nOnly winners from the [Federal Communications Commission (FCC) auction 105](https://www.fcc.gov/auction/105),\nor a verified sub-licensee can get protection on their PAL channels.\nContact your CBSD or Domain Proxy (DP) vendor support team to\nconfirm the following:\n\n- Your vendor supports PALs and passed PAL interoperability testing with SAS.\n- If there are firmware upgrades required for PAL support.\n- If you need to configure any SAS or DP settings specific to PALs.\n\nVerify your FCC registration number\n-----------------------------------\n\nYour FRN must be saved to the SAS Portal to request PAL grants.\nIf the FRN is not correct, SAS cannot provide PAL protection on\nyour PAL channels in your licensed counties.\n\nTo verify the FRN, do the following:\n\n1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).\n2. Click **View deployments**.\n3. On the left, click *settings* **Settings**.\n4. On the right, select the **FRN** field.\n5. Confirm that the FRN listed is correct. If the **FRN** field is missing or incorrect, contact [SAS Support](/spectrum-access-system/docs/getting-support) and provide the correct FRN.\n\nPrepare your CBSD for a PAL grant\n---------------------------------\n\nYou must request the PAL grant from your CBSD or DP. You cannot\nrequest a grant from the SAS Portal.\n\nTo prepare your CBSD for a PAL grant, follow these steps:\n\n1. Confirm that your CBSD's GPS coordinates are located within your PAL county.\n 1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).\n 2. Click **View deployments**.\n 3. On the left, click *map* **Map view**.\n 4. On the left, click *layers* **Overlays** , and then click **PAL**.\n 5. Expand the county folder and find the item labeled with the county name followed by county.\n 6. To show it on the map, select the county boundary.\n2. Confirm your PAL channels.\n 1. [Find and select your CBSD](/spectrum-access-system/docs/(/spectrum-access-system/docs/cbsd/review-configuration)).\n 2. On the right, click the **Status** tab.\n 3. Confirm that your PAL channels are marked with a **P**.\n3. Request a grant on one or multiple PAL channels. Check with your CBSD or DP vendor for instructions about how to request a grant on your PAL channel.\n4. After you request a valid PAL grant from your CBSD, SAS automatically generates a PPA at the next Coordinated Periodic Activities among SASs (CPAS). Any existing grants for other operators' CBSDs on your PAL channel within the PPA are terminated after CPAS. [Learn more about PPAs](/spectrum-access-system/docs/manage-ppa).\n\nA single grant cannot contain both PAL and GAA frequencies. If you need more\nbandwidth than you have PAL channels, check with your CBSD vendor for\ninstructions about how to request separate grants for the PAL and GAA frequency\nranges. Other operators do not protect GAA grants next to a\nCBSD's PAL grant from interference.\n\nView the PPA for a PAL-protected CBSD\n-------------------------------------\n\n1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).\n2. If you have access to multiple organizations, select the organization with the CBSD that you want to review.\n3. [Find your CBSD](/spectrum-access-system/docs/cbsd/review-configuration).\n4. Click the CBSD.\n5. On the right, click the **Coex** tab.\n6. In the **PAL Protection Areas** section, click the PPAs to view their boundaries.\n\n | **Important:** If a PPA is unavailable and you cannot click it, then the PPA doesn't have interference protection from GAA operators. Protection begins after the PAL grant has gone through CPAS. [Learn more about PPAs](/spectrum-access-system/docs/manage-ppa).\n\nView PALs and PPAs for your PAL counties\n----------------------------------------\n\n1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).\n2. If you have access to multiple organizations, select the organization with the CBSD that you want to review.\n3. On the left, click *layers* **Overlays**.\n4. Click the **PAL** tab.\n5. To find all PALs assigned to the county, expand the county folder.\n6. Select a PAL to load and show all PPAs associated with that PAL on the map.\n\nWhat's next\n-----------\n\n- Learn about [PALs](/spectrum-access-system/docs/pals).\n- Learn about [Spectrum Access System](/spectrum-access-system/docs/overview).\n- Learn about [key SAS terms](/spectrum-access-system/docs/key-terms).\n- [Troubleshoot SAS issues](/spectrum-access-system/docs/troubleshooting)."]]
