Mantieni tutto organizzato con le raccolte
Salva e classifica i contenuti in base alle tue preferenze.
La fatturazione di Spectrum Access System (SAS) viene impostata in base al deployment di SAS, ovvero una raccolta di dispositivi Citizens Broadband Radio Service (CBSD) con lo stesso userID (UR ID) e in base al tipo di radio CBSD in ogni deployment. I prezzi sono specificati nel contratto SAS.
Esistono due modalità di fatturazione:
Prezzi fissi per le reti wireless: i servizi SAS vengono fatturati in base alle apparecchiature installate presso la sede del cliente (CPE).
Le stazioni base che operano esclusivamente per connettersi ai CPE in una configurazione wireless fissa
sono senza costi. Questi prezzi si applicano ai deployment SAS che soddisfano una delle seguenti condizioni:
Il numero di CPE CBSD è uguale o superiore al numero di stazioni di base
Il numero di CBSD è inferiore a dieci e il numero di CPE è maggiore di zero
Prezzi per la mobilità, l'IoT o il private LTE: i servizi SAS vengono fatturati per dispositivo Citizens Broadband Radio Service (CBSD), in base alla categoria CBSD A o B. Questi prezzi si applicano a qualsiasi CBSD che non viene utilizzato esclusivamente per la rete wireless fissa da CBSD a CBSD.
Questi prezzi si applicano ai deployment SAS che soddisfano le seguenti condizioni:
Il tipo di CBSD è lo stesso della stazione di base per tutti i CBSD
Il numero di CPE è inferiore al numero di stazioni di base
Nota:per i clienti che hanno eseguito il provisioning di SAS prima del 6 novembre 2023, la modalità di fatturazione per ogni deployment viene determinata al momento del provisioning dell'organizzazione SAS. La modalità di fatturazione è visibile nel portale SAS.
Come funziona la fatturazione
Pagamento per i CBSD registrati ogni giorno:ti viene addebitato il costo dei CBSD registrati per più di 30 minuti ogni giorno. I prezzi sono indicati con incrementi mensili. La fatturazione viene ripartita proporzionalmente in base al numero di giorni per ogni CBSD registrato con Google SAS.
Pagamento mensile: Google invia una fattura all'inizio del mese per gli importi dovuti accumulati nel corso del mese precedente. Le fatture vengono inviate tramite email
all'indirizzo di contatto che hai specificato quando hai effettuato la registrazione a Google
SAS.
Visualizzare le opzioni di fatturazione
In qualità di amministratore, puoi visualizzare le modalità di fatturazione predefinite e consentite associate al tuo account SAS nel Portale SAS.
Fai clic su Visualizza implementazioni e poi apri la tua organizzazione.
Fai clic su table_chartVisualizzazione tabella.
Nella pagina Tabella dei dispositivi, seleziona un CBSD.
Nella scheda Config, visualizza il Tipo di radio come CPE o Basestation.
Informazioni sulla fattura SAS e come pagarla
Le fatture vengono inviate via email all'inizio del mese per le attività del mese precedente e i termini di pagamento sono di 30 giorni netto. Le fatture vengono inviate all'indirizzo email utilizzato per la registrazione. Per modificare l'indirizzo email di fatturazione, contatta il
team di assistenza clienti.
Rivedi e paga gli addebiti
Per esaminare e pagare gli addebiti:
Apri la fattura mensile e vai alla seconda pagina.
Esamina ogni colonna.
Invia il pagamento all'indirizzo o al conto bancario indicato sulla fattura di Google.
Informazioni su ogni colonna della fattura
Voce della fattura
Descrizione
Descrizione
Il tipo o la categoria di dispositivo Citizens Broadband Radio Service (CBRS) per cui ti viene addebitato l'importo:
Spectrum Access System FIXED_WIRELESS_CPE: dispositivo CPE connesso tramite wireless fisso
Spectrum Access System MOBILE_A: sistema di accesso allo spettro di tipo A
Spectrum Access System MOBILE_B: CBSD di categoria B
Quantità
Il numero di giorni in cui i CBSD sono registrati durante il
periodo di fatturazione. Ad esempio, se un CBSD è registrato con il SAS per 30 giorni, la quantità è pari a 30.
Prezzo unitario
Il prezzo per giorno per ogni dispositivo. Ad esempio, se il prezzo per mese è di 2,25 $, il prezzo unitario visualizzato nella fattura è 2,25 $moltiplicato per 12 mesi e poi diviso per 365 giorni, ovvero 0,073972 $.
Per domande sulla fatturazione, invia un'email all'indirizzo collections@google.com oppure fai clic su Contattaci nella parte inferiore dell'email della fattura.
Dati di fatturazione per le organizzazioni non profit
Se la tua organizzazione è non profit, registrati a SAS e inserisci la documentazione relativa all'esenzione fiscale per escludere le imposte dalle tue tariffe di utilizzo mensili di SAS. Solo gli amministratori possono caricare le informazioni sulle esenzioni fiscali.
Per inserire i dati di esenzione fiscale per gli utenti esistenti:
Accedi con l'account amministratore della tua azienda.
A destra, fai clic su Impostazioni e poi su Informazioni sull'esenzione fiscale.
Seleziona quanto segue:
Stato
Numero di esenzione fiscale
Le date di inizio e fine validità del certificato, se applicabile
Il tipo di esenzione, se applicabile
Per selezionare il file del certificato di esenzione fiscale, fai clic su Carica file.
Quando il file è stato caricato, fai clic su Aggiungi e poi su Salva.
Una volta accettato il certificato, lo stato del tuo account viene aggiornato automaticamente.
[[["Facile da capire","easyToUnderstand","thumb-up"],["Il problema è stato risolto","solvedMyProblem","thumb-up"],["Altra","otherUp","thumb-up"]],[["Difficile da capire","hardToUnderstand","thumb-down"],["Informazioni o codice di esempio errati","incorrectInformationOrSampleCode","thumb-down"],["Mancano le informazioni o gli esempi di cui ho bisogno","missingTheInformationSamplesINeed","thumb-down"],["Problema di traduzione","translationIssue","thumb-down"],["Altra","otherDown","thumb-down"]],["Ultimo aggiornamento 2025-09-04 UTC."],[],[],null,["# Spectrum Access System billing\n\nSpectrum Access System (SAS) billing is set by SAS deployment, which is a collection of Citizens Broadband Radio Service Devices (CBSDs) with the same userID (UR ID), and based on the type of CBSD radio in each deployment. Pricing is specified in your SAS agreement.\n\nThere are two billing modes:\n\n- **Fixed wireless pricing:** SAS services are billed per\n [Customer Premise Equipment (CPE)](/spectrum-access-system/docs/key-terms#cpe).\n Base stations that operate solely to connect to CPEs in a fixed wireless setup\n are free of charge. This pricing applies to SAS deployments that meet one of the following conditions:\n\n - The number of CPE CBSDs is equal or more than the number of Base stations\n - The number of CBSDs less than ten and the number of CPEs greater than zero\n\n \u003cbr /\u003e\n\n- **Mobility, IoT, or Private-LTE pricing:** SAS services are\n billed per [Citizens Broadband Radio Service Device (CBSD)](/spectrum-access-system/docs/key-terms#cbsd),\n based on CBSD category A or B. This pricing applies to any\n CBSD that is not used solely for CBSD-to-CBSD fixed wireless.\n This pricing applies to SAS deployments that meet the following conditions:\n\n - CBSD type is the same as the base station for all the CBSDs\n - The number of CPEs is less than the number of base stations\n\n \u003cbr /\u003e\n\n**Note:** For customers who provisioned SAS prior to Nov 6 2023, the billing mode for each deployment is determined when the SAS organization is provisioned. The billing mode is visible in the SAS Portal.\n\nHow billing works\n-----------------\n\n- **Pay for CBSDs registered each day:** You're billed for the CBSDs that are registered for more than 30 minutes each day. The prices are quoted in monthly increments. The billing is prorated per day for each CBSD registered with Google SAS.\n- **Pay each month:** Google sends an invoice at the beginning of the month for the charges incurred during the previous month. Invoices are sent through email to the contact address you specified when you signed up with Google SAS.\n\nView your billing options\n-------------------------\n\nAs an administrator, you can view the default and allowed billing modes\nassociated with your SAS account on the SAS\nPortal.\n| **Important:** To change the billing mode on your account, you must contact SAS support.\n\nTo view the billing mode:\n\n1. Open the [SAS Portal](https://wirelessconnectivity.google.com/sas).\n2. Click **View deployments**.\n3. Select your organization.\n4. On the deployment page, view the billing mode.\n5. For the billing mode, select **Default billing mode** or **Allowed billing mode**.\n\nDetermine if your CBSD operates as a base station\n-------------------------------------------------\n\n| **Important:** SAS examines the [Federal Communications Commission\n| (FCC) ID](/spectrum-access-system/docs/key-terms#fccid) in the FCC database specifications to determine if a CBSD operates as CPE.\n\nTo find your CBSD radio type:\n\n1. Open the [SAS Portal](https://wirelessconnectivity.google.com/sas).\n2. Click **View deployments**, and then open your organization.\n3. Click *table_chart* **Table view**.\n4. On the **Device table** page, select a CBSD.\n5. On the **Config** tab, view the **Radio type** as **CPE** or **Basestation**.\n\nUnderstand and pay your SAS invoice\n-----------------------------------\n\nInvoices are sent by email at the beginning of the month for your previous\nmonth's activities, and payment terms are Net 30. Invoices are sent to the email\naddress that you used to sign up. To change your billing email address, contact the\n[customer maintenance team](mailto:customer-maintenance@google.com).\n\n### Review and pay charges\n\n| **Important:** Any request to send payment to an account other than what is listed on your invoice is fraudulent and should be reported to [collections@google.com](mailto:collections@google.com).\n\nTo review and pay charges:\n\n1. Open your monthly invoice and go to the second page.\n2. Review each column.\n3. Send your payment to the address or bank account listed on the Google invoice.\n\n### Understand each column in the invoice\n\n### Download usage reports\n\nTo request your usage report by email, contact the [SAS support team](mailto:sas-support@google.com).\n\n### Get more help\n\nFor questions about billing, email [collections@google.com](mailto:collections@google.com), or at the bottom of\nyour invoice email, click **Contact us**.\n\nBilling information for nonprofits\n----------------------------------\n\nIf your organization is a nonprofit, sign up for SAS and enter\nyour tax exemption documentation to exclude tax on your monthly\nSAS usage fees. Only administrators can upload tax exemption\ninformation.\n\nTo enter your tax exemption information for existing users:\n\n1. Open [payments.google.com](https://payments.google.com/gp/w/u/0/home/signup).\n2. Sign in with your company's administrator account.\n3. On the right, click **Settings** , and then click **Tax exemption info**.\n4. Select the following:\n - State\n - Tax exemption number\n - The certificate start and end date, if applicable\n - The exemption type, if applicable\n5. To select your tax exemption certificate file, click **Upload File**.\n6. When the file is uploaded, click **Add** , and then click **Save**. After your certificate is accepted, the status of your account updates automatically."]]