Class TransactionOptions (6.68.0)

public final class TransactionOptions extends GeneratedMessageV3 implements TransactionOptionsOrBuilder

Transactions:

Each session can have at most one active transaction at a time (note that standalone reads and queries use a transaction internally and do count towards the one transaction limit). After the active transaction is completed, the session can immediately be re-used for the next transaction. It is not necessary to create a new session for each transaction.

Transaction modes:

Cloud Spanner supports three transaction modes:

Locking read-write. This type of transaction is the only way to write data into Cloud Spanner. These transactions rely on pessimistic locking and, if necessary, two-phase commit. Locking read-write transactions may abort, requiring the application to retry.
Snapshot read-only. Snapshot read-only transactions provide guaranteed consistency across several reads, but do not allow writes. Snapshot read-only transactions can be configured to read at timestamps in the past, or configured to perform a strong read (where Spanner will select a timestamp such that the read is guaranteed to see the effects of all transactions that have committed before the start of the read). Snapshot read-only transactions do not need to be committed.

Queries on change streams must be performed with the snapshot read-only transaction mode, specifying a strong read. Please see TransactionOptions.ReadOnly.strong for more details.
Partitioned DML. This type of transaction is used to execute a single Partitioned DML statement. Partitioned DML partitions the key space and runs the DML statement over each partition in parallel using separate, internal transactions that commit independently. Partitioned DML transactions do not need to be committed.

For transactions that only read, snapshot read-only transactions provide simpler semantics and are almost always faster. In particular, read-only transactions do not take locks, so they do not conflict with read-write transactions. As a consequence of not taking locks, they also do not abort, so retry loops are not needed.

Transactions may only read-write data in a single database. They may, however, read-write data in different tables within that database.

Locking read-write transactions:

Locking transactions may be used to atomically read-modify-write data anywhere in a database. This type of transaction is externally consistent.

Clients should attempt to minimize the amount of time a transaction is active. Faster transactions commit with higher probability and cause less contention. Cloud Spanner attempts to keep read locks active as long as the transaction continues to do reads, and the transaction has not been terminated by Commit or Rollback. Long periods of inactivity at the client may cause Cloud Spanner to release a transaction's locks and abort it.

Conceptually, a read-write transaction consists of zero or more reads or SQL statements followed by Commit. At any time before Commit, the client can send a Rollback request to abort the transaction.

Semantics:

Cloud Spanner can commit the transaction if all read locks it acquired are still valid at commit time, and it is able to acquire write locks for all writes. Cloud Spanner can abort the transaction for any reason. If a commit attempt returns ABORTED, Cloud Spanner guarantees that the transaction has not modified any user data in Cloud Spanner.

Unless the transaction commits, Cloud Spanner makes no guarantees about how long the transaction's locks were held for. It is an error to use Cloud Spanner locks for any sort of mutual exclusion other than between Cloud Spanner transactions themselves.

Retrying aborted transactions:

When a transaction aborts, the application can choose to retry the whole transaction again. To maximize the chances of successfully committing the retry, the client should execute the retry in the same session as the original attempt. The original session's lock priority increases with each consecutive abort, meaning that each attempt has a slightly better chance of success than the previous.

Under some circumstances (for example, many transactions attempting to modify the same row(s)), a transaction can abort many times in a short period before successfully committing. Thus, it is not a good idea to cap the number of retries a transaction can attempt; instead, it is better to limit the total amount of time spent retrying.

Idle transactions:

A transaction is considered idle if it has no outstanding reads or SQL queries and has not started a read or SQL query within the last 10 seconds. Idle transactions can be aborted by Cloud Spanner so that they don't hold on to locks indefinitely. If an idle transaction is aborted, the commit will fail with error ABORTED.

If this behavior is undesirable, periodically executing a simple SQL query in the transaction (for example, SELECT 1) prevents the transaction from becoming idle.

Snapshot read-only transactions:

Snapshot read-only transactions provides a simpler method than locking read-write transactions for doing several consistent reads. However, this type of transaction does not support writes.

Snapshot transactions do not take locks. Instead, they work by choosing a Cloud Spanner timestamp, then executing all reads at that timestamp. Since they do not acquire locks, they do not block concurrent read-write transactions.

Unlike locking read-write transactions, snapshot read-only transactions never abort. They can fail if the chosen read timestamp is garbage collected; however, the default garbage collection policy is generous enough that most applications do not need to worry about this in practice.

Snapshot read-only transactions do not need to call Commit or Rollback (and in fact are not permitted to do so).

To execute a snapshot transaction, the client specifies a timestamp bound, which tells Cloud Spanner how to choose a read timestamp.

The types of timestamp bound are:
Strong (the default).
Bounded staleness.
Exact staleness.

If the Cloud Spanner database to be read is geographically distributed, stale read-only transactions can execute more quickly than strong or read-write transactions, because they are able to execute far from the leader replica.

Each type of timestamp bound is discussed in detail below.

Strong: Strong reads are guaranteed to see the effects of all transactions that have committed before the start of the read. Furthermore, all rows yielded by a single read are consistent with each other -- if any part of the read observes a transaction, all parts of the read see the transaction.

Strong reads are not repeatable: two consecutive strong read-only transactions might return inconsistent results if there are concurrent writes. If consistency across reads is required, the reads should be executed within a transaction or at an exact read timestamp.

Queries on change streams (see below for more details) must also specify the strong read timestamp bound.

See TransactionOptions.ReadOnly.strong.

Exact staleness:

These timestamp bounds execute reads at a user-specified timestamp. Reads at a timestamp are guaranteed to see a consistent prefix of the global transaction history: they observe modifications done by all transactions with a commit timestamp less than or equal to the read timestamp, and observe none of the modifications done by transactions with a larger commit timestamp. They will block until all conflicting transactions that may be assigned commit timestamps <= the read timestamp have finished.

The timestamp can either be expressed as an absolute Cloud Spanner commit timestamp or a staleness relative to the current time.

These modes do not require a "negotiation phase" to pick a timestamp. As a result, they execute slightly faster than the equivalent boundedly stale concurrency modes. On the other hand, boundedly stale reads usually return fresher results.

See TransactionOptions.ReadOnly.read_timestamp and TransactionOptions.ReadOnly.exact_staleness.

Bounded staleness:

Bounded staleness modes allow Cloud Spanner to pick the read timestamp, subject to a user-provided staleness bound. Cloud Spanner chooses the newest timestamp within the staleness bound that allows execution of the reads at the closest available replica without blocking.

All rows yielded are consistent with each other -- if any part of the read observes a transaction, all parts of the read see the transaction. Boundedly stale reads are not repeatable: two stale reads, even if they use the same staleness bound, can execute at different timestamps and thus return inconsistent results.

Boundedly stale reads execute in two phases: the first phase negotiates a timestamp among all replicas needed to serve the read. In the second phase, reads are executed at the negotiated timestamp.

As a result of the two phase execution, bounded staleness reads are usually a little slower than comparable exact staleness reads. However, they are typically able to return fresher results, and are more likely to execute at the closest replica.

Because the timestamp negotiation requires up-front knowledge of which rows will be read, it can only be used with single-use read-only transactions.

See TransactionOptions.ReadOnly.max_staleness and TransactionOptions.ReadOnly.min_read_timestamp.

Old read timestamps and garbage collection:

Cloud Spanner continuously garbage collects deleted and overwritten data in the background to reclaim storage space. This process is known as "version GC". By default, version GC reclaims versions after they are one hour old. Because of this, Cloud Spanner cannot perform reads at read timestamps more than one hour in the past. This restriction also applies to in-progress reads and/or SQL queries whose timestamp become too old while executing. Reads and SQL queries with too-old read timestamps fail with the error FAILED_PRECONDITION.

You can configure and extend the VERSION_RETENTION_PERIOD of a database up to a period as long as one week, which allows Cloud Spanner to perform reads up to one week in the past.

Querying change Streams:

A Change Stream is a schema object that can be configured to watch data changes on the entire database, a set of tables, or a set of columns in a database.

When a change stream is created, Spanner automatically defines a corresponding SQL Table-Valued Function (TVF) that can be used to query the change records in the associated change stream using the ExecuteStreamingSql API. The name of the TVF for a change stream is generated from the name of the change stream: READ_<change_stream_name>.

All queries on change stream TVFs must be executed using the ExecuteStreamingSql API with a single-use read-only transaction with a strong read-only timestamp_bound. The change stream TVF allows users to specify the start_timestamp and end_timestamp for the time range of interest. All change records within the retention period is accessible using the strong read-only timestamp_bound. All other TransactionOptions are invalid for change stream queries.

In addition, if TransactionOptions.read_only.return_read_timestamp is set to true, a special value of 2^63 - 2 will be returned in the Transaction message that describes the transaction, instead of a valid read timestamp. This special value should be discarded and not used for any subsequent queries.

Please see https://cloud.google.com/spanner/docs/change-streams for more details on how to query the change stream TVFs.

Partitioned DML transactions:

Partitioned DML transactions are used to execute DML statements with a different execution strategy that provides different, and often better, scalability properties for large, table-wide operations than DML in a ReadWrite transaction. Smaller scoped statements, such as an OLTP workload, should prefer using ReadWrite transactions.

Partitioned DML partitions the keyspace and runs the DML statement on each partition in separate, internal transactions. These transactions commit automatically when complete, and run independently from one another.

To reduce lock contention, this execution strategy only acquires read locks on rows that match the WHERE clause of the statement. Additionally, the smaller per-partition transactions hold locks for less time.

That said, Partitioned DML is not a drop-in replacement for standard DML used in ReadWrite transactions.
- The DML statement must be fully-partitionable. Specifically, the statement must be expressible as the union of many statements which each access only a single row of the table.
- The statement is not applied atomically to all rows of the table. Rather, the statement is applied atomically to partitions of the table, in independent transactions. Secondary index rows are updated atomically with the base table rows.
- Partitioned DML does not guarantee exactly-once execution semantics against a partition. The statement will be applied at least once to each partition. It is strongly recommended that the DML statement should be idempotent to avoid unexpected results. For instance, it is potentially dangerous to run a statement such as UPDATE table SET column = column + 1 as it could be run multiple times against some rows.
- The partitions are committed automatically - there is no support for Commit or Rollback. If the call returns an error, or if the client issuing the ExecuteSql call dies, it is possible that some rows had the statement executed on them successfully. It is also possible that statement was never executed against other rows.
- Partitioned DML transactions may only contain the execution of a single DML statement via ExecuteSql or ExecuteStreamingSql.
- If any error is encountered during the execution of the partitioned DML operation (for instance, a UNIQUE INDEX violation, division by zero, or a value that cannot be stored due to schema constraints), then the operation is stopped at that point and an error is returned. It is possible that at this point, some partitions have been committed (or even committed multiple times), and other partitions have not been run at all.
Given the above, Partitioned DML is good fit for large, database-wide, operations that are idempotent, such as deleting old rows from a very large table.

Protobuf type google.spanner.v1.TransactionOptions

Inheritance

Object > AbstractMessageLite<MessageType,BuilderType> > AbstractMessage > GeneratedMessageV3 > TransactionOptions

Implements

TransactionOptionsOrBuilder

Inherited Members

AbstractMessage.equals(Object)

AbstractMessage.findInitializationErrors()

AbstractMessage.getInitializationErrorString()

AbstractMessage.hashBoolean(boolean)

AbstractMessage.hashCode()

AbstractMessage.hashEnum(Internal.EnumLite)

AbstractMessage.hashEnumList(List<? extends Internal.EnumLite>)

AbstractMessage.hashFields(int,Map<Descriptors.FieldDescriptor,Object>)

AbstractMessage.hashLong(long)

AbstractMessage.toString()

AbstractMessageLite.<T>addAll(Iterable<T>,Collection<? super T>)

AbstractMessageLite.<T>addAll(Iterable<T>,List<? super T>)

AbstractMessageLite.checkByteStringIsUtf8(ByteString)

AbstractMessageLite.toByteArray()

AbstractMessageLite.toByteString()

AbstractMessageLite.writeDelimitedTo(OutputStream)

AbstractMessageLite.writeTo(OutputStream)

com.google.protobuf.GeneratedMessageV3.<ListT>makeMutableCopy(ListT)

com.google.protobuf.GeneratedMessageV3.<ListT>makeMutableCopy(ListT,int)

GeneratedMessageV3.<M>parseDelimitedWithIOException(Parser<M>,InputStream)

GeneratedMessageV3.<M>parseDelimitedWithIOException(Parser<M>,InputStream,ExtensionRegistryLite)

GeneratedMessageV3.<M>parseWithIOException(Parser<M>,CodedInputStream)

GeneratedMessageV3.<M>parseWithIOException(Parser<M>,CodedInputStream,ExtensionRegistryLite)

GeneratedMessageV3.<M>parseWithIOException(Parser<M>,InputStream)

GeneratedMessageV3.<M>parseWithIOException(Parser<M>,InputStream,ExtensionRegistryLite)

com.google.protobuf.GeneratedMessageV3.<T>emptyList(java.lang.Class<T>)

GeneratedMessageV3.<V>serializeBooleanMapTo(CodedOutputStream,MapField<Boolean,V>,MapEntry<Boolean,V>,int)

GeneratedMessageV3.<V>serializeIntegerMapTo(CodedOutputStream,MapField<Integer,V>,MapEntry<Integer,V>,int)

GeneratedMessageV3.<V>serializeLongMapTo(CodedOutputStream,MapField<Long,V>,MapEntry<Long,V>,int)

GeneratedMessageV3.<V>serializeStringMapTo(CodedOutputStream,MapField<String,V>,MapEntry<String,V>,int)

GeneratedMessageV3.canUseUnsafe()

GeneratedMessageV3.computeStringSize(int,Object)

GeneratedMessageV3.computeStringSizeNoTag(Object)

GeneratedMessageV3.emptyBooleanList()

GeneratedMessageV3.emptyDoubleList()

GeneratedMessageV3.emptyFloatList()

GeneratedMessageV3.emptyIntList()

GeneratedMessageV3.emptyLongList()

GeneratedMessageV3.getAllFields()

GeneratedMessageV3.getDescriptorForType()

GeneratedMessageV3.getField(Descriptors.FieldDescriptor)

GeneratedMessageV3.getOneofFieldDescriptor(Descriptors.OneofDescriptor)

GeneratedMessageV3.getParserForType()

GeneratedMessageV3.getRepeatedField(Descriptors.FieldDescriptor,int)

GeneratedMessageV3.getRepeatedFieldCount(Descriptors.FieldDescriptor)

GeneratedMessageV3.getSerializedSize()

GeneratedMessageV3.getUnknownFields()

GeneratedMessageV3.hasField(Descriptors.FieldDescriptor)

GeneratedMessageV3.hasOneof(Descriptors.OneofDescriptor)

GeneratedMessageV3.internalGetFieldAccessorTable()

GeneratedMessageV3.internalGetMapField(int)

com.google.protobuf.GeneratedMessageV3.internalGetMapFieldReflection(int)

GeneratedMessageV3.isInitialized()

GeneratedMessageV3.isStringEmpty(Object)

GeneratedMessageV3.makeExtensionsImmutable()

GeneratedMessageV3.mergeFromAndMakeImmutableInternal(CodedInputStream,ExtensionRegistryLite)

GeneratedMessageV3.mutableCopy(Internal.BooleanList)

GeneratedMessageV3.mutableCopy(Internal.DoubleList)

GeneratedMessageV3.mutableCopy(Internal.FloatList)

GeneratedMessageV3.mutableCopy(Internal.IntList)

GeneratedMessageV3.mutableCopy(Internal.LongList)

GeneratedMessageV3.newBooleanList()

GeneratedMessageV3.newBuilderForType(AbstractMessage.BuilderParent)

GeneratedMessageV3.newBuilderForType(GeneratedMessageV3.BuilderParent)

GeneratedMessageV3.newDoubleList()

GeneratedMessageV3.newFloatList()

GeneratedMessageV3.newInstance(GeneratedMessageV3.UnusedPrivateParameter)

GeneratedMessageV3.newIntList()

GeneratedMessageV3.newLongList()

GeneratedMessageV3.parseUnknownField(CodedInputStream,UnknownFieldSet.Builder,ExtensionRegistryLite,int)

GeneratedMessageV3.parseUnknownFieldProto3(CodedInputStream,UnknownFieldSet.Builder,ExtensionRegistryLite,int)

GeneratedMessageV3.writeReplace()

GeneratedMessageV3.writeString(CodedOutputStream,int,Object)

GeneratedMessageV3.writeStringNoTag(CodedOutputStream,Object)

GeneratedMessageV3.writeTo(CodedOutputStream)

Object.clone()

Object.finalize()

Object.getClass()

Object.notify()

Object.notifyAll()

Object.wait()

Object.wait(long)

Object.wait(long,int)

Static Fields

EXCLUDE_TXN_FROM_CHANGE_STREAMS_FIELD_NUMBER

public static final int EXCLUDE_TXN_FROM_CHANGE_STREAMS_FIELD_NUMBER

Field Value
Type	Description
`int`

PARTITIONED_DML_FIELD_NUMBER

public static final int PARTITIONED_DML_FIELD_NUMBER

Field Value
Type	Description
`int`

READ_ONLY_FIELD_NUMBER

public static final int READ_ONLY_FIELD_NUMBER

Field Value
Type	Description
`int`

READ_WRITE_FIELD_NUMBER

public static final int READ_WRITE_FIELD_NUMBER

Field Value
Type	Description
`int`

Static Methods

getDefaultInstance()

public static TransactionOptions getDefaultInstance()

Returns
Type	Description
`TransactionOptions`

getDescriptor()

public static final Descriptors.Descriptor getDescriptor()

Returns
Type	Description
`Descriptor`

newBuilder()

public static TransactionOptions.Builder newBuilder()

Returns
Type	Description
`TransactionOptions.Builder`

newBuilder(TransactionOptions prototype)

public static TransactionOptions.Builder newBuilder(TransactionOptions prototype)

Parameter
Name	Description
`prototype`	`TransactionOptions`

Returns
Type	Description
`TransactionOptions.Builder`

parseDelimitedFrom(InputStream input)

public static TransactionOptions parseDelimitedFrom(InputStream input)

Parameter
Name	Description
`input`	`InputStream`

Returns
Type	Description
`TransactionOptions`

Exceptions
Type	Description
`IOException`

parseDelimitedFrom(InputStream input, ExtensionRegistryLite extensionRegistry)

public static TransactionOptions parseDelimitedFrom(InputStream input, ExtensionRegistryLite extensionRegistry)

Parameters
Name	Description
`input`	`InputStream`
`extensionRegistry`	`ExtensionRegistryLite`

Returns
Type	Description
`TransactionOptions`

Exceptions
Type	Description
`IOException`

parseFrom(byte[] data)

public static TransactionOptions parseFrom(byte[] data)

Parameter
Name	Description
`data`	`byte[]`

Returns
Type	Description
`TransactionOptions`

Exceptions
Type	Description
`InvalidProtocolBufferException`

parseFrom(byte[] data, ExtensionRegistryLite extensionRegistry)

public static TransactionOptions parseFrom(byte[] data, ExtensionRegistryLite extensionRegistry)

Parameters
Name	Description
`data`	`byte[]`
`extensionRegistry`	`ExtensionRegistryLite`

Returns
Type	Description
`TransactionOptions`

Exceptions
Type	Description
`InvalidProtocolBufferException`

parseFrom(ByteString data)

public static TransactionOptions parseFrom(ByteString data)

Parameter
Name	Description
`data`	`ByteString`

Returns
Type	Description
`TransactionOptions`

Exceptions
Type	Description
`InvalidProtocolBufferException`

parseFrom(ByteString data, ExtensionRegistryLite extensionRegistry)

public static TransactionOptions parseFrom(ByteString data, ExtensionRegistryLite extensionRegistry)

Parameters
Name	Description
`data`	`ByteString`
`extensionRegistry`	`ExtensionRegistryLite`

Returns
Type	Description
`TransactionOptions`

Exceptions
Type	Description
`InvalidProtocolBufferException`

parseFrom(CodedInputStream input)

public static TransactionOptions parseFrom(CodedInputStream input)

Parameter
Name	Description
`input`	`CodedInputStream`

Returns
Type	Description
`TransactionOptions`

Exceptions
Type	Description
`IOException`

parseFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

public static TransactionOptions parseFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

Parameters
Name	Description
`input`	`CodedInputStream`
`extensionRegistry`	`ExtensionRegistryLite`

Returns
Type	Description
`TransactionOptions`

Exceptions
Type	Description
`IOException`

parseFrom(InputStream input)

public static TransactionOptions parseFrom(InputStream input)

Parameter
Name	Description
`input`	`InputStream`

Returns
Type	Description
`TransactionOptions`

Exceptions
Type	Description
`IOException`

parseFrom(InputStream input, ExtensionRegistryLite extensionRegistry)

public static TransactionOptions parseFrom(InputStream input, ExtensionRegistryLite extensionRegistry)

Parameters
Name	Description
`input`	`InputStream`
`extensionRegistry`	`ExtensionRegistryLite`

Returns
Type	Description
`TransactionOptions`

Exceptions
Type	Description
`IOException`

parseFrom(ByteBuffer data)

public static TransactionOptions parseFrom(ByteBuffer data)

Parameter
Name	Description
`data`	`ByteBuffer`

Returns
Type	Description
`TransactionOptions`

Exceptions
Type	Description
`InvalidProtocolBufferException`

parseFrom(ByteBuffer data, ExtensionRegistryLite extensionRegistry)

public static TransactionOptions parseFrom(ByteBuffer data, ExtensionRegistryLite extensionRegistry)

Parameters
Name	Description
`data`	`ByteBuffer`
`extensionRegistry`	`ExtensionRegistryLite`

Returns
Type	Description
`TransactionOptions`

Exceptions
Type	Description
`InvalidProtocolBufferException`

parser()

public static Parser<TransactionOptions> parser()

Returns
Type	Description
`Parser<TransactionOptions>`

Methods

equals(Object obj)

public boolean equals(Object obj)

Parameter
Name	Description
`obj`	`Object`

Returns
Type	Description
`boolean`

Overrides

AbstractMessage.equals(Object other)

getDefaultInstanceForType()

public TransactionOptions getDefaultInstanceForType()

Returns
Type	Description
`TransactionOptions`

getExcludeTxnFromChangeStreams()

public boolean getExcludeTxnFromChangeStreams()

When exclude_txn_from_change_streams is set to true:

Mutations from this transaction will not be recorded in change streams with DDL option allow_txn_exclusion=true that are tracking columns modified by these transactions.
Mutations from this transaction will be recorded in change streams with DDL option allow_txn_exclusion=false or not set that are tracking columns modified by these transactions.

When exclude_txn_from_change_streams is set to false or not set, mutations from this transaction will be recorded in all change streams that are tracking columns modified by these transactions. exclude_txn_from_change_streams may only be specified for read-write or partitioned-dml transactions, otherwise the API will return an INVALID_ARGUMENT error.

bool exclude_txn_from_change_streams = 5;

Returns
Type	Description
`boolean`	The excludeTxnFromChangeStreams.

getModeCase()

public TransactionOptions.ModeCase getModeCase()

Returns
Type	Description
`TransactionOptions.ModeCase`

getParserForType()

public Parser<TransactionOptions> getParserForType()

Returns
Type	Description
`Parser<TransactionOptions>`

Overrides

GeneratedMessageV3.getParserForType()

getPartitionedDml()

public TransactionOptions.PartitionedDml getPartitionedDml()

Partitioned DML transaction.

Authorization to begin a Partitioned DML transaction requires spanner.databases.beginPartitionedDmlTransaction permission on the session resource.

.google.spanner.v1.TransactionOptions.PartitionedDml partitioned_dml = 3;

Returns
Type	Description
`TransactionOptions.PartitionedDml`	The partitionedDml.

getPartitionedDmlOrBuilder()

public TransactionOptions.PartitionedDmlOrBuilder getPartitionedDmlOrBuilder()

Partitioned DML transaction.

Authorization to begin a Partitioned DML transaction requires spanner.databases.beginPartitionedDmlTransaction permission on the session resource.

.google.spanner.v1.TransactionOptions.PartitionedDml partitioned_dml = 3;

Returns
Type	Description
`TransactionOptions.PartitionedDmlOrBuilder`

getReadOnly()

public TransactionOptions.ReadOnly getReadOnly()

Transaction will not write.

Authorization to begin a read-only transaction requires spanner.databases.beginReadOnlyTransaction permission on the session resource.

.google.spanner.v1.TransactionOptions.ReadOnly read_only = 2;

Returns
Type	Description
`TransactionOptions.ReadOnly`	The readOnly.

getReadOnlyOrBuilder()

public TransactionOptions.ReadOnlyOrBuilder getReadOnlyOrBuilder()

Transaction will not write.

Authorization to begin a read-only transaction requires spanner.databases.beginReadOnlyTransaction permission on the session resource.

.google.spanner.v1.TransactionOptions.ReadOnly read_only = 2;

Returns
Type	Description
`TransactionOptions.ReadOnlyOrBuilder`

getReadWrite()

public TransactionOptions.ReadWrite getReadWrite()

Transaction may write.

Authorization to begin a read-write transaction requires spanner.databases.beginOrRollbackReadWriteTransaction permission on the session resource.

.google.spanner.v1.TransactionOptions.ReadWrite read_write = 1;

Returns
Type	Description
`TransactionOptions.ReadWrite`	The readWrite.

getReadWriteOrBuilder()

public TransactionOptions.ReadWriteOrBuilder getReadWriteOrBuilder()

Transaction may write.

Authorization to begin a read-write transaction requires spanner.databases.beginOrRollbackReadWriteTransaction permission on the session resource.

.google.spanner.v1.TransactionOptions.ReadWrite read_write = 1;

Returns
Type	Description
`TransactionOptions.ReadWriteOrBuilder`

getSerializedSize()

public int getSerializedSize()

Returns
Type	Description
`int`

Overrides

GeneratedMessageV3.getSerializedSize()

hasPartitionedDml()

public boolean hasPartitionedDml()

Partitioned DML transaction.

Authorization to begin a Partitioned DML transaction requires spanner.databases.beginPartitionedDmlTransaction permission on the session resource.

.google.spanner.v1.TransactionOptions.PartitionedDml partitioned_dml = 3;

Returns
Type	Description
`boolean`	Whether the partitionedDml field is set.

hasReadOnly()

public boolean hasReadOnly()

Transaction will not write.

Authorization to begin a read-only transaction requires spanner.databases.beginReadOnlyTransaction permission on the session resource.

.google.spanner.v1.TransactionOptions.ReadOnly read_only = 2;

Returns
Type	Description
`boolean`	Whether the readOnly field is set.

hasReadWrite()

public boolean hasReadWrite()

Transaction may write.

Authorization to begin a read-write transaction requires spanner.databases.beginOrRollbackReadWriteTransaction permission on the session resource.

.google.spanner.v1.TransactionOptions.ReadWrite read_write = 1;

Returns
Type	Description
`boolean`	Whether the readWrite field is set.

hashCode()

public int hashCode()

Returns
Type	Description
`int`

Overrides

AbstractMessage.hashCode()

internalGetFieldAccessorTable()

protected GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()

Returns
Type	Description
`FieldAccessorTable`

Overrides

GeneratedMessageV3.internalGetFieldAccessorTable()

isInitialized()

public final boolean isInitialized()

Returns
Type	Description
`boolean`

Overrides

GeneratedMessageV3.isInitialized()

newBuilderForType()

public TransactionOptions.Builder newBuilderForType()

Returns
Type	Description
`TransactionOptions.Builder`

newBuilderForType(GeneratedMessageV3.BuilderParent parent)

protected TransactionOptions.Builder newBuilderForType(GeneratedMessageV3.BuilderParent parent)

Parameter
Name	Description
`parent`	`BuilderParent`

Returns
Type	Description
`TransactionOptions.Builder`

Overrides

GeneratedMessageV3.newBuilderForType(GeneratedMessageV3.BuilderParent parent)

newInstance(GeneratedMessageV3.UnusedPrivateParameter unused)

protected Object newInstance(GeneratedMessageV3.UnusedPrivateParameter unused)

Parameter
Name	Description
`unused`	`UnusedPrivateParameter`

Returns
Type	Description
`Object`

Overrides

GeneratedMessageV3.newInstance(GeneratedMessageV3.UnusedPrivateParameter unused)

toBuilder()

public TransactionOptions.Builder toBuilder()

Returns
Type	Description
`TransactionOptions.Builder`

writeTo(CodedOutputStream output)

public void writeTo(CodedOutputStream output)

Parameter
Name	Description
`output`	`CodedOutputStream`

Overrides

GeneratedMessageV3.writeTo(CodedOutputStream output)

Exceptions
Type	Description
`IOException`