Class VpnTunnel.Builder (1.9.1)

Version 1.9.1

• 1.63.0 (latest)
• 1.62.0
• 1.61.0
• 1.59.0
• 1.58.0
• 1.57.0
• 1.56.0
• 1.55.0
• 1.54.0
• 1.53.0
• 1.52.0
• 1.51.0
• 1.50.0
• 1.49.0
• 1.47.0
• 1.46.0
• 1.45.0
• 1.44.0
• 1.43.0
• 1.42.0
• 1.41.0
• 1.40.0
• 1.39.0
• 1.38.0
• 1.37.0
• 1.34.0
• 1.33.0
• 1.32.0
• 1.31.0
• 1.30.0
• 1.29.0
• 1.28.0
• 1.27.0
• 1.26.0
• 1.25.0
• 1.24.0
• 1.23.0
• 1.22.0
• 1.21.0
• 1.20.0
• 1.19.0
• 1.18.0
• 1.17.0
• 1.16.0
• 1.15.0
• 1.14.0
• 1.13.0
• 1.12.1
• 1.11.0
• 1.9.1
• 1.8.1
• 1.7.2
• 1.6.0-beta

public static final class VpnTunnel.Builder extends GeneratedMessageV3.Builder<VpnTunnel.Builder> implements VpnTunnelOrBuilder

Represents a Cloud VPN Tunnel resource. For more information about VPN, read the the Cloud VPN Overview.

Protobuf type google.cloud.compute.v1.VpnTunnel

Inheritance

Object > AbstractMessageLite.Builder<MessageType,BuilderType> > AbstractMessage.Builder<BuilderType> > GeneratedMessageV3.Builder > VpnTunnel.Builder

Implements

VpnTunnelOrBuilder

Inherited Members

AbstractMessage.Builder.findInitializationErrors()

AbstractMessage.Builder.getInitializationErrorString()

AbstractMessage.Builder.internalMergeFrom(AbstractMessageLite)

AbstractMessage.Builder.mergeDelimitedFrom(InputStream)

AbstractMessage.Builder.mergeDelimitedFrom(InputStream,ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(byte[])

AbstractMessage.Builder.mergeFrom(byte[],ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(byte[],int,int)

AbstractMessage.Builder.mergeFrom(byte[],int,int,ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(ByteString)

AbstractMessage.Builder.mergeFrom(ByteString,ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(CodedInputStream)

AbstractMessage.Builder.mergeFrom(CodedInputStream,ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(Message)

AbstractMessage.Builder.mergeFrom(InputStream)

AbstractMessage.Builder.mergeFrom(InputStream,ExtensionRegistryLite)

AbstractMessage.Builder.newUninitializedMessageException(Message)

AbstractMessage.Builder.toString()

AbstractMessageLite.Builder.<T>addAll(Iterable<T>,Collection<? super T>)

AbstractMessageLite.Builder.<T>addAll(Iterable<T>,List<? super T>)

AbstractMessageLite.Builder.internalMergeFrom(MessageType)

AbstractMessageLite.Builder.mergeFrom(MessageLite)

AbstractMessageLite.Builder.newUninitializedMessageException(MessageLite)

GeneratedMessageV3.Builder.addRepeatedField(Descriptors.FieldDescriptor,Object)

GeneratedMessageV3.Builder.clear()

GeneratedMessageV3.Builder.clearField(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.clearOneof(Descriptors.OneofDescriptor)

GeneratedMessageV3.Builder.clone()

GeneratedMessageV3.Builder.getAllFields()

GeneratedMessageV3.Builder.getDescriptorForType()

GeneratedMessageV3.Builder.getField(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.getFieldBuilder(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.getOneofFieldDescriptor(Descriptors.OneofDescriptor)

GeneratedMessageV3.Builder.getParentForChildren()

GeneratedMessageV3.Builder.getRepeatedField(Descriptors.FieldDescriptor,int)

GeneratedMessageV3.Builder.getRepeatedFieldBuilder(Descriptors.FieldDescriptor,int)

GeneratedMessageV3.Builder.getRepeatedFieldCount(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.getUnknownFields()

GeneratedMessageV3.Builder.hasField(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.hasOneof(Descriptors.OneofDescriptor)

GeneratedMessageV3.Builder.internalGetFieldAccessorTable()

GeneratedMessageV3.Builder.internalGetMapField(int)

GeneratedMessageV3.Builder.internalGetMutableMapField(int)

GeneratedMessageV3.Builder.isClean()

GeneratedMessageV3.Builder.isInitialized()

GeneratedMessageV3.Builder.markClean()

GeneratedMessageV3.Builder.mergeUnknownFields(UnknownFieldSet)

GeneratedMessageV3.Builder.newBuilderForField(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.onBuilt()

GeneratedMessageV3.Builder.onChanged()

GeneratedMessageV3.Builder.setField(Descriptors.FieldDescriptor,Object)

GeneratedMessageV3.Builder.setRepeatedField(Descriptors.FieldDescriptor,int,Object)

GeneratedMessageV3.Builder.setUnknownFields(UnknownFieldSet)

GeneratedMessageV3.Builder.setUnknownFieldsProto3(UnknownFieldSet)

Object.equals(Object)

Object.finalize()

Object.getClass()

Object.hashCode()

Object.notify()

Object.notifyAll()

Object.wait()

Object.wait(long)

Object.wait(long,int)

Static Methods

getDescriptor()

public static final Descriptors.Descriptor getDescriptor()

Returns

Type	Description
Descriptor

Methods

addAllLocalTrafficSelector(Iterable<String> values)

public VpnTunnel.Builder addAllLocalTrafficSelector(Iterable<String> values)

Local traffic selector to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges must be disjoint. Only IPv4 is supported.

repeated string local_traffic_selector = 317314613;

Parameter

Name	Description
values	Iterable<String> The localTrafficSelector to add.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

addAllRemoteTrafficSelector(Iterable<String> values)

public VpnTunnel.Builder addAllRemoteTrafficSelector(Iterable<String> values)

Remote traffic selectors to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges should be disjoint. Only IPv4 is supported.

repeated string remote_traffic_selector = 358887098;

Parameter

Name	Description
values	Iterable<String> The remoteTrafficSelector to add.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

addLocalTrafficSelector(String value)

public VpnTunnel.Builder addLocalTrafficSelector(String value)

Local traffic selector to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges must be disjoint. Only IPv4 is supported.

repeated string local_traffic_selector = 317314613;

Parameter

Name	Description
value	String The localTrafficSelector to add.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

addLocalTrafficSelectorBytes(ByteString value)

public VpnTunnel.Builder addLocalTrafficSelectorBytes(ByteString value)

Local traffic selector to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges must be disjoint. Only IPv4 is supported.

repeated string local_traffic_selector = 317314613;

Parameter

Name	Description
value	ByteString The bytes of the localTrafficSelector to add.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

addRemoteTrafficSelector(String value)

public VpnTunnel.Builder addRemoteTrafficSelector(String value)

Remote traffic selectors to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges should be disjoint. Only IPv4 is supported.

repeated string remote_traffic_selector = 358887098;

Parameter

Name	Description
value	String The remoteTrafficSelector to add.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

addRemoteTrafficSelectorBytes(ByteString value)

public VpnTunnel.Builder addRemoteTrafficSelectorBytes(ByteString value)

Remote traffic selectors to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges should be disjoint. Only IPv4 is supported.

repeated string remote_traffic_selector = 358887098;

Parameter

Name	Description
value	ByteString The bytes of the remoteTrafficSelector to add.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

addRepeatedField(Descriptors.FieldDescriptor field, Object value)

public VpnTunnel.Builder addRepeatedField(Descriptors.FieldDescriptor field, Object value)

Parameters

Name	Description
field	FieldDescriptor
value	Object

Returns

Type	Description
VpnTunnel.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.addRepeatedField(Descriptors.FieldDescriptor field, Object value)

build()

public VpnTunnel build()

Returns

Type	Description
VpnTunnel

buildPartial()

public VpnTunnel buildPartial()

Returns

Type	Description
VpnTunnel

clear()

public VpnTunnel.Builder clear()

Returns

Type	Description
VpnTunnel.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.clear()

clearCreationTimestamp()

public VpnTunnel.Builder clearCreationTimestamp()

[Output Only] Creation timestamp in RFC3339 text format.

optional string creation_timestamp = 30525366;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearDescription()

public VpnTunnel.Builder clearDescription()

An optional description of this resource. Provide this property when you create the resource.

optional string description = 422937596;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearDetailedStatus()

public VpnTunnel.Builder clearDetailedStatus()

[Output Only] Detailed status message for the VPN tunnel.

optional string detailed_status = 333501025;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearField(Descriptors.FieldDescriptor field)

public VpnTunnel.Builder clearField(Descriptors.FieldDescriptor field)

Parameter

Name	Description
field	FieldDescriptor

Returns

Type	Description
VpnTunnel.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.clearField(Descriptors.FieldDescriptor field)

clearId()

public VpnTunnel.Builder clearId()

[Output Only] The unique identifier for the resource. This identifier is defined by the server.

optional uint64 id = 3355;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearIkeVersion()

public VpnTunnel.Builder clearIkeVersion()

IKE protocol version to use when establishing the VPN tunnel with the peer VPN gateway. Acceptable IKE versions are 1 or 2. The default version is 2.

optional int32 ike_version = 218376220;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearKind()

public VpnTunnel.Builder clearKind()

[Output Only] Type of resource. Always compute#vpnTunnel for VPN tunnels.

optional string kind = 3292052;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearLocalTrafficSelector()

public VpnTunnel.Builder clearLocalTrafficSelector()

Local traffic selector to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges must be disjoint. Only IPv4 is supported.

repeated string local_traffic_selector = 317314613;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearName()

public VpnTunnel.Builder clearName()

Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression a-z? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.

optional string name = 3373707;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearOneof(Descriptors.OneofDescriptor oneof)

public VpnTunnel.Builder clearOneof(Descriptors.OneofDescriptor oneof)

Parameter

Name	Description
oneof	OneofDescriptor

Returns

Type	Description
VpnTunnel.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.clearOneof(Descriptors.OneofDescriptor oneof)

clearPeerExternalGateway()

public VpnTunnel.Builder clearPeerExternalGateway()

URL of the peer side external VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created. This field is exclusive with the field peerGcpGateway.

optional string peer_external_gateway = 384956173;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearPeerExternalGatewayInterface()

public VpnTunnel.Builder clearPeerExternalGatewayInterface()

The interface ID of the external VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created.

optional int32 peer_external_gateway_interface = 452768391;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearPeerGcpGateway()

public VpnTunnel.Builder clearPeerGcpGateway()

URL of the peer side HA GCP VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created. This field can be used when creating highly available VPN from VPC network to VPC network, the field is exclusive with the field peerExternalGateway. If provided, the VPN tunnel will automatically use the same vpnGatewayInterface ID in the peer GCP VPN gateway.

optional string peer_gcp_gateway = 281867452;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearPeerIp()

public VpnTunnel.Builder clearPeerIp()

IP address of the peer VPN gateway. Only IPv4 is supported.

optional string peer_ip = 383249700;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearRegion()

public VpnTunnel.Builder clearRegion()

[Output Only] URL of the region where the VPN tunnel resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.

optional string region = 138946292;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearRemoteTrafficSelector()

public VpnTunnel.Builder clearRemoteTrafficSelector()

Remote traffic selectors to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges should be disjoint. Only IPv4 is supported.

repeated string remote_traffic_selector = 358887098;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearRouter()

public VpnTunnel.Builder clearRouter()

URL of the router resource to be used for dynamic routing.

optional string router = 148608841;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearSelfLink()

public VpnTunnel.Builder clearSelfLink()

[Output Only] Server-defined URL for the resource.

optional string self_link = 456214797;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearSharedSecret()

public VpnTunnel.Builder clearSharedSecret()

Shared secret used to set the secure session between the Cloud VPN gateway and the peer VPN gateway.

optional string shared_secret = 381932490;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearSharedSecretHash()

public VpnTunnel.Builder clearSharedSecretHash()

Hash of the shared secret.

optional string shared_secret_hash = 398881891;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearStatus()

public VpnTunnel.Builder clearStatus()

[Output Only] The status of the VPN tunnel, which can be one of the following: - PROVISIONING: Resource is being allocated for the VPN tunnel. - WAITING_FOR_FULL_CONFIG: Waiting to receive all VPN-related configs from the user. Network, TargetVpnGateway, VpnTunnel, ForwardingRule, and Route resources are needed to setup the VPN tunnel. - FIRST_HANDSHAKE: Successful first handshake with the peer VPN. - ESTABLISHED: Secure session is successfully established with the peer VPN. - NETWORK_ERROR: Deprecated, replaced by NO_INCOMING_PACKETS - AUTHORIZATION_ERROR: Auth error (for example, bad shared secret). - NEGOTIATION_FAILURE: Handshake failed. - DEPROVISIONING: Resources are being deallocated for the VPN tunnel. - FAILED: Tunnel creation has failed and the tunnel is not ready to be used. - NO_INCOMING_PACKETS: No incoming packets from peer. - REJECTED: Tunnel configuration was rejected, can be result of being denied access. - ALLOCATING_RESOURCES: Cloud VPN is in the process of allocating all required resources. - STOPPED: Tunnel is stopped due to its Forwarding Rules being deleted for Classic VPN tunnels or the project is in frozen state. - PEER_IDENTITY_MISMATCH: Peer identity does not match peer IP, probably behind NAT. - TS_NARROWING_NOT_ALLOWED: Traffic selector narrowing not allowed for an HA-VPN tunnel. Check the Status enum for the list of possible values.

optional string status = 181260274;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearTargetVpnGateway()

public VpnTunnel.Builder clearTargetVpnGateway()

URL of the Target VPN gateway with which this VPN tunnel is associated. Provided by the client when the VPN tunnel is created.

optional string target_vpn_gateway = 532512843;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearVpnGateway()

public VpnTunnel.Builder clearVpnGateway()

URL of the VPN gateway with which this VPN tunnel is associated. Provided by the client when the VPN tunnel is created. This must be used (instead of target_vpn_gateway) if a High Availability VPN gateway resource is created.

optional string vpn_gateway = 406684153;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clearVpnGatewayInterface()

public VpnTunnel.Builder clearVpnGatewayInterface()

The interface ID of the VPN gateway with which this VPN tunnel is associated.

optional int32 vpn_gateway_interface = 95979123;

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

clone()

public VpnTunnel.Builder clone()

Returns

Type	Description
VpnTunnel.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.clone()

getCreationTimestamp()

public String getCreationTimestamp()

[Output Only] Creation timestamp in RFC3339 text format.

optional string creation_timestamp = 30525366;

Returns

Type	Description
String	The creationTimestamp.

getCreationTimestampBytes()

public ByteString getCreationTimestampBytes()

[Output Only] Creation timestamp in RFC3339 text format.

optional string creation_timestamp = 30525366;

Returns

Type	Description
ByteString	The bytes for creationTimestamp.

getDefaultInstanceForType()

public VpnTunnel getDefaultInstanceForType()

Returns

Type	Description
VpnTunnel

getDescription()

public String getDescription()

An optional description of this resource. Provide this property when you create the resource.

optional string description = 422937596;

Returns

Type	Description
String	The description.

getDescriptionBytes()

public ByteString getDescriptionBytes()

An optional description of this resource. Provide this property when you create the resource.

optional string description = 422937596;

Returns

Type	Description
ByteString	The bytes for description.

getDescriptorForType()

public Descriptors.Descriptor getDescriptorForType()

Returns

Type	Description
Descriptor

Overrides

GeneratedMessageV3.Builder<BuilderType>.getDescriptorForType()

getDetailedStatus()

public String getDetailedStatus()

[Output Only] Detailed status message for the VPN tunnel.

optional string detailed_status = 333501025;

Returns

Type	Description
String	The detailedStatus.

getDetailedStatusBytes()

public ByteString getDetailedStatusBytes()

[Output Only] Detailed status message for the VPN tunnel.

optional string detailed_status = 333501025;

Returns

Type	Description
ByteString	The bytes for detailedStatus.

getId()

public long getId()

[Output Only] The unique identifier for the resource. This identifier is defined by the server.

optional uint64 id = 3355;

Returns

Type	Description
long	The id.

getIkeVersion()

public int getIkeVersion()

IKE protocol version to use when establishing the VPN tunnel with the peer VPN gateway. Acceptable IKE versions are 1 or 2. The default version is 2.

optional int32 ike_version = 218376220;

Returns

Type	Description
int	The ikeVersion.

getKind()

public String getKind()

[Output Only] Type of resource. Always compute#vpnTunnel for VPN tunnels.

optional string kind = 3292052;

Returns

Type	Description
String	The kind.

getKindBytes()

public ByteString getKindBytes()

[Output Only] Type of resource. Always compute#vpnTunnel for VPN tunnels.

optional string kind = 3292052;

Returns

Type	Description
ByteString	The bytes for kind.

getLocalTrafficSelector(int index)

public String getLocalTrafficSelector(int index)

Local traffic selector to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges must be disjoint. Only IPv4 is supported.

repeated string local_traffic_selector = 317314613;

Parameter

Name	Description
index	int The index of the element to return.

Returns

Type	Description
String	The localTrafficSelector at the given index.

getLocalTrafficSelectorBytes(int index)

public ByteString getLocalTrafficSelectorBytes(int index)

Local traffic selector to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges must be disjoint. Only IPv4 is supported.

repeated string local_traffic_selector = 317314613;

Parameter

Name	Description
index	int The index of the value to return.

Returns

Type	Description
ByteString	The bytes of the localTrafficSelector at the given index.

getLocalTrafficSelectorCount()

public int getLocalTrafficSelectorCount()

Local traffic selector to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges must be disjoint. Only IPv4 is supported.

repeated string local_traffic_selector = 317314613;

Returns

Type	Description
int	The count of localTrafficSelector.

getLocalTrafficSelectorList()

public ProtocolStringList getLocalTrafficSelectorList()

Local traffic selector to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges must be disjoint. Only IPv4 is supported.

repeated string local_traffic_selector = 317314613;

Returns

Type	Description
ProtocolStringList	A list containing the localTrafficSelector.

getName()

public String getName()

Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression a-z? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.

optional string name = 3373707;

Returns

Type	Description
String	The name.

getNameBytes()

public ByteString getNameBytes()

Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression a-z? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.

optional string name = 3373707;

Returns

Type	Description
ByteString	The bytes for name.

getPeerExternalGateway()

public String getPeerExternalGateway()

URL of the peer side external VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created. This field is exclusive with the field peerGcpGateway.

optional string peer_external_gateway = 384956173;

Returns

Type	Description
String	The peerExternalGateway.

getPeerExternalGatewayBytes()

public ByteString getPeerExternalGatewayBytes()

URL of the peer side external VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created. This field is exclusive with the field peerGcpGateway.

optional string peer_external_gateway = 384956173;

Returns

Type	Description
ByteString	The bytes for peerExternalGateway.

getPeerExternalGatewayInterface()

public int getPeerExternalGatewayInterface()

The interface ID of the external VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created.

optional int32 peer_external_gateway_interface = 452768391;

Returns

Type	Description
int	The peerExternalGatewayInterface.

getPeerGcpGateway()

public String getPeerGcpGateway()

URL of the peer side HA GCP VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created. This field can be used when creating highly available VPN from VPC network to VPC network, the field is exclusive with the field peerExternalGateway. If provided, the VPN tunnel will automatically use the same vpnGatewayInterface ID in the peer GCP VPN gateway.

optional string peer_gcp_gateway = 281867452;

Returns

Type	Description
String	The peerGcpGateway.

getPeerGcpGatewayBytes()

public ByteString getPeerGcpGatewayBytes()

URL of the peer side HA GCP VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created. This field can be used when creating highly available VPN from VPC network to VPC network, the field is exclusive with the field peerExternalGateway. If provided, the VPN tunnel will automatically use the same vpnGatewayInterface ID in the peer GCP VPN gateway.

optional string peer_gcp_gateway = 281867452;

Returns

Type	Description
ByteString	The bytes for peerGcpGateway.

getPeerIp()

public String getPeerIp()

IP address of the peer VPN gateway. Only IPv4 is supported.

optional string peer_ip = 383249700;

Returns

Type	Description
String	The peerIp.

getPeerIpBytes()

public ByteString getPeerIpBytes()

IP address of the peer VPN gateway. Only IPv4 is supported.

optional string peer_ip = 383249700;

Returns

Type	Description
ByteString	The bytes for peerIp.

getRegion()

public String getRegion()

[Output Only] URL of the region where the VPN tunnel resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.

optional string region = 138946292;

Returns

Type	Description
String	The region.

getRegionBytes()

public ByteString getRegionBytes()

[Output Only] URL of the region where the VPN tunnel resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.

optional string region = 138946292;

Returns

Type	Description
ByteString	The bytes for region.

getRemoteTrafficSelector(int index)

public String getRemoteTrafficSelector(int index)

Remote traffic selectors to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges should be disjoint. Only IPv4 is supported.

repeated string remote_traffic_selector = 358887098;

Parameter

Name	Description
index	int The index of the element to return.

Returns

Type	Description
String	The remoteTrafficSelector at the given index.

getRemoteTrafficSelectorBytes(int index)

public ByteString getRemoteTrafficSelectorBytes(int index)

Remote traffic selectors to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges should be disjoint. Only IPv4 is supported.

repeated string remote_traffic_selector = 358887098;

Parameter

Name	Description
index	int The index of the value to return.

Returns

Type	Description
ByteString	The bytes of the remoteTrafficSelector at the given index.

getRemoteTrafficSelectorCount()

public int getRemoteTrafficSelectorCount()

Remote traffic selectors to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges should be disjoint. Only IPv4 is supported.

repeated string remote_traffic_selector = 358887098;

Returns

Type	Description
int	The count of remoteTrafficSelector.

getRemoteTrafficSelectorList()

public ProtocolStringList getRemoteTrafficSelectorList()

Remote traffic selectors to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges should be disjoint. Only IPv4 is supported.

repeated string remote_traffic_selector = 358887098;

Returns

Type	Description
ProtocolStringList	A list containing the remoteTrafficSelector.

getRouter()

public String getRouter()

URL of the router resource to be used for dynamic routing.

optional string router = 148608841;

Returns

Type	Description
String	The router.

getRouterBytes()

public ByteString getRouterBytes()

URL of the router resource to be used for dynamic routing.

optional string router = 148608841;

Returns

Type	Description
ByteString	The bytes for router.

getSelfLink()

public String getSelfLink()

[Output Only] Server-defined URL for the resource.

optional string self_link = 456214797;

Returns

Type	Description
String	The selfLink.

getSelfLinkBytes()

public ByteString getSelfLinkBytes()

[Output Only] Server-defined URL for the resource.

optional string self_link = 456214797;

Returns

Type	Description
ByteString	The bytes for selfLink.

getSharedSecret()

public String getSharedSecret()

Shared secret used to set the secure session between the Cloud VPN gateway and the peer VPN gateway.

optional string shared_secret = 381932490;

Returns

Type	Description
String	The sharedSecret.

getSharedSecretBytes()

public ByteString getSharedSecretBytes()

Shared secret used to set the secure session between the Cloud VPN gateway and the peer VPN gateway.

optional string shared_secret = 381932490;

Returns

Type	Description
ByteString	The bytes for sharedSecret.

getSharedSecretHash()

public String getSharedSecretHash()

Hash of the shared secret.

optional string shared_secret_hash = 398881891;

Returns

Type	Description
String	The sharedSecretHash.

getSharedSecretHashBytes()

public ByteString getSharedSecretHashBytes()

Hash of the shared secret.

optional string shared_secret_hash = 398881891;

Returns

Type	Description
ByteString	The bytes for sharedSecretHash.

getStatus()

public String getStatus()

[Output Only] The status of the VPN tunnel, which can be one of the following: - PROVISIONING: Resource is being allocated for the VPN tunnel. - WAITING_FOR_FULL_CONFIG: Waiting to receive all VPN-related configs from the user. Network, TargetVpnGateway, VpnTunnel, ForwardingRule, and Route resources are needed to setup the VPN tunnel. - FIRST_HANDSHAKE: Successful first handshake with the peer VPN. - ESTABLISHED: Secure session is successfully established with the peer VPN. - NETWORK_ERROR: Deprecated, replaced by NO_INCOMING_PACKETS - AUTHORIZATION_ERROR: Auth error (for example, bad shared secret). - NEGOTIATION_FAILURE: Handshake failed. - DEPROVISIONING: Resources are being deallocated for the VPN tunnel. - FAILED: Tunnel creation has failed and the tunnel is not ready to be used. - NO_INCOMING_PACKETS: No incoming packets from peer. - REJECTED: Tunnel configuration was rejected, can be result of being denied access. - ALLOCATING_RESOURCES: Cloud VPN is in the process of allocating all required resources. - STOPPED: Tunnel is stopped due to its Forwarding Rules being deleted for Classic VPN tunnels or the project is in frozen state. - PEER_IDENTITY_MISMATCH: Peer identity does not match peer IP, probably behind NAT. - TS_NARROWING_NOT_ALLOWED: Traffic selector narrowing not allowed for an HA-VPN tunnel. Check the Status enum for the list of possible values.

optional string status = 181260274;

Returns

Type	Description
String	The status.

getStatusBytes()

public ByteString getStatusBytes()

[Output Only] The status of the VPN tunnel, which can be one of the following: - PROVISIONING: Resource is being allocated for the VPN tunnel. - WAITING_FOR_FULL_CONFIG: Waiting to receive all VPN-related configs from the user. Network, TargetVpnGateway, VpnTunnel, ForwardingRule, and Route resources are needed to setup the VPN tunnel. - FIRST_HANDSHAKE: Successful first handshake with the peer VPN. - ESTABLISHED: Secure session is successfully established with the peer VPN. - NETWORK_ERROR: Deprecated, replaced by NO_INCOMING_PACKETS - AUTHORIZATION_ERROR: Auth error (for example, bad shared secret). - NEGOTIATION_FAILURE: Handshake failed. - DEPROVISIONING: Resources are being deallocated for the VPN tunnel. - FAILED: Tunnel creation has failed and the tunnel is not ready to be used. - NO_INCOMING_PACKETS: No incoming packets from peer. - REJECTED: Tunnel configuration was rejected, can be result of being denied access. - ALLOCATING_RESOURCES: Cloud VPN is in the process of allocating all required resources. - STOPPED: Tunnel is stopped due to its Forwarding Rules being deleted for Classic VPN tunnels or the project is in frozen state. - PEER_IDENTITY_MISMATCH: Peer identity does not match peer IP, probably behind NAT. - TS_NARROWING_NOT_ALLOWED: Traffic selector narrowing not allowed for an HA-VPN tunnel. Check the Status enum for the list of possible values.

optional string status = 181260274;

Returns

Type	Description
ByteString	The bytes for status.

getTargetVpnGateway()

public String getTargetVpnGateway()

URL of the Target VPN gateway with which this VPN tunnel is associated. Provided by the client when the VPN tunnel is created.

optional string target_vpn_gateway = 532512843;

Returns

Type	Description
String	The targetVpnGateway.

getTargetVpnGatewayBytes()

public ByteString getTargetVpnGatewayBytes()

URL of the Target VPN gateway with which this VPN tunnel is associated. Provided by the client when the VPN tunnel is created.

optional string target_vpn_gateway = 532512843;

Returns

Type	Description
ByteString	The bytes for targetVpnGateway.

getVpnGateway()

public String getVpnGateway()

URL of the VPN gateway with which this VPN tunnel is associated. Provided by the client when the VPN tunnel is created. This must be used (instead of target_vpn_gateway) if a High Availability VPN gateway resource is created.

optional string vpn_gateway = 406684153;

Returns

Type	Description
String	The vpnGateway.

getVpnGatewayBytes()

public ByteString getVpnGatewayBytes()

URL of the VPN gateway with which this VPN tunnel is associated. Provided by the client when the VPN tunnel is created. This must be used (instead of target_vpn_gateway) if a High Availability VPN gateway resource is created.

optional string vpn_gateway = 406684153;

Returns

Type	Description
ByteString	The bytes for vpnGateway.

getVpnGatewayInterface()

public int getVpnGatewayInterface()

The interface ID of the VPN gateway with which this VPN tunnel is associated.

optional int32 vpn_gateway_interface = 95979123;

Returns

Type	Description
int	The vpnGatewayInterface.

hasCreationTimestamp()

public boolean hasCreationTimestamp()

[Output Only] Creation timestamp in RFC3339 text format.

optional string creation_timestamp = 30525366;

Returns

Type	Description
boolean	Whether the creationTimestamp field is set.

hasDescription()

public boolean hasDescription()

An optional description of this resource. Provide this property when you create the resource.

optional string description = 422937596;

Returns

Type	Description
boolean	Whether the description field is set.

hasDetailedStatus()

public boolean hasDetailedStatus()

[Output Only] Detailed status message for the VPN tunnel.

optional string detailed_status = 333501025;

Returns

Type	Description
boolean	Whether the detailedStatus field is set.

hasId()

public boolean hasId()

[Output Only] The unique identifier for the resource. This identifier is defined by the server.

optional uint64 id = 3355;

Returns

Type	Description
boolean	Whether the id field is set.

hasIkeVersion()

public boolean hasIkeVersion()

IKE protocol version to use when establishing the VPN tunnel with the peer VPN gateway. Acceptable IKE versions are 1 or 2. The default version is 2.

optional int32 ike_version = 218376220;

Returns

Type	Description
boolean	Whether the ikeVersion field is set.

hasKind()

public boolean hasKind()

[Output Only] Type of resource. Always compute#vpnTunnel for VPN tunnels.

optional string kind = 3292052;

Returns

Type	Description
boolean	Whether the kind field is set.

hasName()

public boolean hasName()

Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression a-z? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.

optional string name = 3373707;

Returns

Type	Description
boolean	Whether the name field is set.

hasPeerExternalGateway()

public boolean hasPeerExternalGateway()

URL of the peer side external VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created. This field is exclusive with the field peerGcpGateway.

optional string peer_external_gateway = 384956173;

Returns

Type	Description
boolean	Whether the peerExternalGateway field is set.

hasPeerExternalGatewayInterface()

public boolean hasPeerExternalGatewayInterface()

The interface ID of the external VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created.

optional int32 peer_external_gateway_interface = 452768391;

Returns

Type	Description
boolean	Whether the peerExternalGatewayInterface field is set.

hasPeerGcpGateway()

public boolean hasPeerGcpGateway()

URL of the peer side HA GCP VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created. This field can be used when creating highly available VPN from VPC network to VPC network, the field is exclusive with the field peerExternalGateway. If provided, the VPN tunnel will automatically use the same vpnGatewayInterface ID in the peer GCP VPN gateway.

optional string peer_gcp_gateway = 281867452;

Returns

Type	Description
boolean	Whether the peerGcpGateway field is set.

hasPeerIp()

public boolean hasPeerIp()

IP address of the peer VPN gateway. Only IPv4 is supported.

optional string peer_ip = 383249700;

Returns

Type	Description
boolean	Whether the peerIp field is set.

hasRegion()

public boolean hasRegion()

[Output Only] URL of the region where the VPN tunnel resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.

optional string region = 138946292;

Returns

Type	Description
boolean	Whether the region field is set.

hasRouter()

public boolean hasRouter()

URL of the router resource to be used for dynamic routing.

optional string router = 148608841;

Returns

Type	Description
boolean	Whether the router field is set.

hasSelfLink()

public boolean hasSelfLink()

[Output Only] Server-defined URL for the resource.

optional string self_link = 456214797;

Returns

Type	Description
boolean	Whether the selfLink field is set.

hasSharedSecret()

public boolean hasSharedSecret()

Shared secret used to set the secure session between the Cloud VPN gateway and the peer VPN gateway.

optional string shared_secret = 381932490;

Returns

Type	Description
boolean	Whether the sharedSecret field is set.

hasSharedSecretHash()

public boolean hasSharedSecretHash()

Hash of the shared secret.

optional string shared_secret_hash = 398881891;

Returns

Type	Description
boolean	Whether the sharedSecretHash field is set.

hasStatus()

public boolean hasStatus()

[Output Only] The status of the VPN tunnel, which can be one of the following: - PROVISIONING: Resource is being allocated for the VPN tunnel. - WAITING_FOR_FULL_CONFIG: Waiting to receive all VPN-related configs from the user. Network, TargetVpnGateway, VpnTunnel, ForwardingRule, and Route resources are needed to setup the VPN tunnel. - FIRST_HANDSHAKE: Successful first handshake with the peer VPN. - ESTABLISHED: Secure session is successfully established with the peer VPN. - NETWORK_ERROR: Deprecated, replaced by NO_INCOMING_PACKETS - AUTHORIZATION_ERROR: Auth error (for example, bad shared secret). - NEGOTIATION_FAILURE: Handshake failed. - DEPROVISIONING: Resources are being deallocated for the VPN tunnel. - FAILED: Tunnel creation has failed and the tunnel is not ready to be used. - NO_INCOMING_PACKETS: No incoming packets from peer. - REJECTED: Tunnel configuration was rejected, can be result of being denied access. - ALLOCATING_RESOURCES: Cloud VPN is in the process of allocating all required resources. - STOPPED: Tunnel is stopped due to its Forwarding Rules being deleted for Classic VPN tunnels or the project is in frozen state. - PEER_IDENTITY_MISMATCH: Peer identity does not match peer IP, probably behind NAT. - TS_NARROWING_NOT_ALLOWED: Traffic selector narrowing not allowed for an HA-VPN tunnel. Check the Status enum for the list of possible values.

optional string status = 181260274;

Returns

Type	Description
boolean	Whether the status field is set.

hasTargetVpnGateway()

public boolean hasTargetVpnGateway()

URL of the Target VPN gateway with which this VPN tunnel is associated. Provided by the client when the VPN tunnel is created.

optional string target_vpn_gateway = 532512843;

Returns

Type	Description
boolean	Whether the targetVpnGateway field is set.

hasVpnGateway()

public boolean hasVpnGateway()

URL of the VPN gateway with which this VPN tunnel is associated. Provided by the client when the VPN tunnel is created. This must be used (instead of target_vpn_gateway) if a High Availability VPN gateway resource is created.

optional string vpn_gateway = 406684153;

Returns

Type	Description
boolean	Whether the vpnGateway field is set.

hasVpnGatewayInterface()

public boolean hasVpnGatewayInterface()

The interface ID of the VPN gateway with which this VPN tunnel is associated.

optional int32 vpn_gateway_interface = 95979123;

Returns

Type	Description
boolean	Whether the vpnGatewayInterface field is set.

internalGetFieldAccessorTable()

protected GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()

Returns

Type	Description
FieldAccessorTable

Overrides

GeneratedMessageV3.Builder<BuilderType>.internalGetFieldAccessorTable()

isInitialized()

public final boolean isInitialized()

Returns

Type	Description
boolean

Overrides

GeneratedMessageV3.Builder<BuilderType>.isInitialized()

mergeFrom(VpnTunnel other)

public VpnTunnel.Builder mergeFrom(VpnTunnel other)

Parameter

Name	Description
other	VpnTunnel

Returns

Type	Description
VpnTunnel.Builder

mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

public VpnTunnel.Builder mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

Parameters

Name	Description
input	CodedInputStream
extensionRegistry	ExtensionRegistryLite

Returns

Type	Description
VpnTunnel.Builder

Overrides

AbstractMessage.Builder<BuilderType>.mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

Exceptions

Type	Description
IOException

mergeFrom(Message other)

public VpnTunnel.Builder mergeFrom(Message other)

Parameter

Name	Description
other	Message

Returns

Type	Description
VpnTunnel.Builder

Overrides

AbstractMessage.Builder<BuilderType>.mergeFrom(Message other)

mergeUnknownFields(UnknownFieldSet unknownFields)

public final VpnTunnel.Builder mergeUnknownFields(UnknownFieldSet unknownFields)

Parameter

Name	Description
unknownFields	UnknownFieldSet

Returns

Type	Description
VpnTunnel.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.mergeUnknownFields(UnknownFieldSet unknownFields)

setCreationTimestamp(String value)

public VpnTunnel.Builder setCreationTimestamp(String value)

[Output Only] Creation timestamp in RFC3339 text format.

optional string creation_timestamp = 30525366;

Parameter

Name	Description
value	String The creationTimestamp to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setCreationTimestampBytes(ByteString value)

public VpnTunnel.Builder setCreationTimestampBytes(ByteString value)

[Output Only] Creation timestamp in RFC3339 text format.

optional string creation_timestamp = 30525366;

Parameter

Name	Description
value	ByteString The bytes for creationTimestamp to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setDescription(String value)

public VpnTunnel.Builder setDescription(String value)

An optional description of this resource. Provide this property when you create the resource.

optional string description = 422937596;

Parameter

Name	Description
value	String The description to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setDescriptionBytes(ByteString value)

public VpnTunnel.Builder setDescriptionBytes(ByteString value)

An optional description of this resource. Provide this property when you create the resource.

optional string description = 422937596;

Parameter

Name	Description
value	ByteString The bytes for description to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setDetailedStatus(String value)

public VpnTunnel.Builder setDetailedStatus(String value)

[Output Only] Detailed status message for the VPN tunnel.

optional string detailed_status = 333501025;

Parameter

Name	Description
value	String The detailedStatus to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setDetailedStatusBytes(ByteString value)

public VpnTunnel.Builder setDetailedStatusBytes(ByteString value)

[Output Only] Detailed status message for the VPN tunnel.

optional string detailed_status = 333501025;

Parameter

Name	Description
value	ByteString The bytes for detailedStatus to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setField(Descriptors.FieldDescriptor field, Object value)

public VpnTunnel.Builder setField(Descriptors.FieldDescriptor field, Object value)

Parameters

Name	Description
field	FieldDescriptor
value	Object

Returns

Type	Description
VpnTunnel.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.setField(Descriptors.FieldDescriptor field, Object value)

setId(long value)

public VpnTunnel.Builder setId(long value)

[Output Only] The unique identifier for the resource. This identifier is defined by the server.

optional uint64 id = 3355;

Parameter

Name	Description
value	long The id to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setIkeVersion(int value)

public VpnTunnel.Builder setIkeVersion(int value)

IKE protocol version to use when establishing the VPN tunnel with the peer VPN gateway. Acceptable IKE versions are 1 or 2. The default version is 2.

optional int32 ike_version = 218376220;

Parameter

Name	Description
value	int The ikeVersion to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setKind(String value)

public VpnTunnel.Builder setKind(String value)

[Output Only] Type of resource. Always compute#vpnTunnel for VPN tunnels.

optional string kind = 3292052;

Parameter

Name	Description
value	String The kind to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setKindBytes(ByteString value)

public VpnTunnel.Builder setKindBytes(ByteString value)

[Output Only] Type of resource. Always compute#vpnTunnel for VPN tunnels.

optional string kind = 3292052;

Parameter

Name	Description
value	ByteString The bytes for kind to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setLocalTrafficSelector(int index, String value)

public VpnTunnel.Builder setLocalTrafficSelector(int index, String value)

Local traffic selector to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges must be disjoint. Only IPv4 is supported.

repeated string local_traffic_selector = 317314613;

Parameters

Name	Description
index	int The index to set the value at.
value	String The localTrafficSelector to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setName(String value)

public VpnTunnel.Builder setName(String value)

Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression a-z? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.

optional string name = 3373707;

Parameter

Name	Description
value	String The name to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setNameBytes(ByteString value)

public VpnTunnel.Builder setNameBytes(ByteString value)

Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression a-z? which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.

optional string name = 3373707;

Parameter

Name	Description
value	ByteString The bytes for name to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setPeerExternalGateway(String value)

public VpnTunnel.Builder setPeerExternalGateway(String value)

URL of the peer side external VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created. This field is exclusive with the field peerGcpGateway.

optional string peer_external_gateway = 384956173;

Parameter

Name	Description
value	String The peerExternalGateway to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setPeerExternalGatewayBytes(ByteString value)

public VpnTunnel.Builder setPeerExternalGatewayBytes(ByteString value)

URL of the peer side external VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created. This field is exclusive with the field peerGcpGateway.

optional string peer_external_gateway = 384956173;

Parameter

Name	Description
value	ByteString The bytes for peerExternalGateway to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setPeerExternalGatewayInterface(int value)

public VpnTunnel.Builder setPeerExternalGatewayInterface(int value)

The interface ID of the external VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created.

optional int32 peer_external_gateway_interface = 452768391;

Parameter

Name	Description
value	int The peerExternalGatewayInterface to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setPeerGcpGateway(String value)

public VpnTunnel.Builder setPeerGcpGateway(String value)

URL of the peer side HA GCP VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created. This field can be used when creating highly available VPN from VPC network to VPC network, the field is exclusive with the field peerExternalGateway. If provided, the VPN tunnel will automatically use the same vpnGatewayInterface ID in the peer GCP VPN gateway.

optional string peer_gcp_gateway = 281867452;

Parameter

Name	Description
value	String The peerGcpGateway to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setPeerGcpGatewayBytes(ByteString value)

public VpnTunnel.Builder setPeerGcpGatewayBytes(ByteString value)

URL of the peer side HA GCP VPN gateway to which this VPN tunnel is connected. Provided by the client when the VPN tunnel is created. This field can be used when creating highly available VPN from VPC network to VPC network, the field is exclusive with the field peerExternalGateway. If provided, the VPN tunnel will automatically use the same vpnGatewayInterface ID in the peer GCP VPN gateway.

optional string peer_gcp_gateway = 281867452;

Parameter

Name	Description
value	ByteString The bytes for peerGcpGateway to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setPeerIp(String value)

public VpnTunnel.Builder setPeerIp(String value)

IP address of the peer VPN gateway. Only IPv4 is supported.

optional string peer_ip = 383249700;

Parameter

Name	Description
value	String The peerIp to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setPeerIpBytes(ByteString value)

public VpnTunnel.Builder setPeerIpBytes(ByteString value)

IP address of the peer VPN gateway. Only IPv4 is supported.

optional string peer_ip = 383249700;

Parameter

Name	Description
value	ByteString The bytes for peerIp to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setRegion(String value)

public VpnTunnel.Builder setRegion(String value)

[Output Only] URL of the region where the VPN tunnel resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.

optional string region = 138946292;

Parameter

Name	Description
value	String The region to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setRegionBytes(ByteString value)

public VpnTunnel.Builder setRegionBytes(ByteString value)

[Output Only] URL of the region where the VPN tunnel resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.

optional string region = 138946292;

Parameter

Name	Description
value	ByteString The bytes for region to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setRemoteTrafficSelector(int index, String value)

public VpnTunnel.Builder setRemoteTrafficSelector(int index, String value)

Remote traffic selectors to use when establishing the VPN tunnel with the peer VPN gateway. The value should be a CIDR formatted string, for example: 192.168.0.0/16. The ranges should be disjoint. Only IPv4 is supported.

repeated string remote_traffic_selector = 358887098;

Parameters

Name	Description
index	int The index to set the value at.
value	String The remoteTrafficSelector to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

public VpnTunnel.Builder setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

Parameters

Name	Description
field	FieldDescriptor
index	int
value	Object

Returns

Type	Description
VpnTunnel.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

setRouter(String value)

public VpnTunnel.Builder setRouter(String value)

URL of the router resource to be used for dynamic routing.

optional string router = 148608841;

Parameter

Name	Description
value	String The router to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setRouterBytes(ByteString value)

public VpnTunnel.Builder setRouterBytes(ByteString value)

URL of the router resource to be used for dynamic routing.

optional string router = 148608841;

Parameter

Name	Description
value	ByteString The bytes for router to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setSelfLink(String value)

public VpnTunnel.Builder setSelfLink(String value)

[Output Only] Server-defined URL for the resource.

optional string self_link = 456214797;

Parameter

Name	Description
value	String The selfLink to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setSelfLinkBytes(ByteString value)

public VpnTunnel.Builder setSelfLinkBytes(ByteString value)

[Output Only] Server-defined URL for the resource.

optional string self_link = 456214797;

Parameter

Name	Description
value	ByteString The bytes for selfLink to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setSharedSecret(String value)

public VpnTunnel.Builder setSharedSecret(String value)

Shared secret used to set the secure session between the Cloud VPN gateway and the peer VPN gateway.

optional string shared_secret = 381932490;

Parameter

Name	Description
value	String The sharedSecret to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setSharedSecretBytes(ByteString value)

public VpnTunnel.Builder setSharedSecretBytes(ByteString value)

Shared secret used to set the secure session between the Cloud VPN gateway and the peer VPN gateway.

optional string shared_secret = 381932490;

Parameter

Name	Description
value	ByteString The bytes for sharedSecret to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setSharedSecretHash(String value)

public VpnTunnel.Builder setSharedSecretHash(String value)

Hash of the shared secret.

optional string shared_secret_hash = 398881891;

Parameter

Name	Description
value	String The sharedSecretHash to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setSharedSecretHashBytes(ByteString value)

public VpnTunnel.Builder setSharedSecretHashBytes(ByteString value)

Hash of the shared secret.

optional string shared_secret_hash = 398881891;

Parameter

Name	Description
value	ByteString The bytes for sharedSecretHash to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setStatus(String value)

public VpnTunnel.Builder setStatus(String value)

[Output Only] The status of the VPN tunnel, which can be one of the following: - PROVISIONING: Resource is being allocated for the VPN tunnel. - WAITING_FOR_FULL_CONFIG: Waiting to receive all VPN-related configs from the user. Network, TargetVpnGateway, VpnTunnel, ForwardingRule, and Route resources are needed to setup the VPN tunnel. - FIRST_HANDSHAKE: Successful first handshake with the peer VPN. - ESTABLISHED: Secure session is successfully established with the peer VPN. - NETWORK_ERROR: Deprecated, replaced by NO_INCOMING_PACKETS - AUTHORIZATION_ERROR: Auth error (for example, bad shared secret). - NEGOTIATION_FAILURE: Handshake failed. - DEPROVISIONING: Resources are being deallocated for the VPN tunnel. - FAILED: Tunnel creation has failed and the tunnel is not ready to be used. - NO_INCOMING_PACKETS: No incoming packets from peer. - REJECTED: Tunnel configuration was rejected, can be result of being denied access. - ALLOCATING_RESOURCES: Cloud VPN is in the process of allocating all required resources. - STOPPED: Tunnel is stopped due to its Forwarding Rules being deleted for Classic VPN tunnels or the project is in frozen state. - PEER_IDENTITY_MISMATCH: Peer identity does not match peer IP, probably behind NAT. - TS_NARROWING_NOT_ALLOWED: Traffic selector narrowing not allowed for an HA-VPN tunnel. Check the Status enum for the list of possible values.

optional string status = 181260274;

Parameter

Name	Description
value	String The status to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setStatusBytes(ByteString value)

public VpnTunnel.Builder setStatusBytes(ByteString value)

[Output Only] The status of the VPN tunnel, which can be one of the following: - PROVISIONING: Resource is being allocated for the VPN tunnel. - WAITING_FOR_FULL_CONFIG: Waiting to receive all VPN-related configs from the user. Network, TargetVpnGateway, VpnTunnel, ForwardingRule, and Route resources are needed to setup the VPN tunnel. - FIRST_HANDSHAKE: Successful first handshake with the peer VPN. - ESTABLISHED: Secure session is successfully established with the peer VPN. - NETWORK_ERROR: Deprecated, replaced by NO_INCOMING_PACKETS - AUTHORIZATION_ERROR: Auth error (for example, bad shared secret). - NEGOTIATION_FAILURE: Handshake failed. - DEPROVISIONING: Resources are being deallocated for the VPN tunnel. - FAILED: Tunnel creation has failed and the tunnel is not ready to be used. - NO_INCOMING_PACKETS: No incoming packets from peer. - REJECTED: Tunnel configuration was rejected, can be result of being denied access. - ALLOCATING_RESOURCES: Cloud VPN is in the process of allocating all required resources. - STOPPED: Tunnel is stopped due to its Forwarding Rules being deleted for Classic VPN tunnels or the project is in frozen state. - PEER_IDENTITY_MISMATCH: Peer identity does not match peer IP, probably behind NAT. - TS_NARROWING_NOT_ALLOWED: Traffic selector narrowing not allowed for an HA-VPN tunnel. Check the Status enum for the list of possible values.

optional string status = 181260274;

Parameter

Name	Description
value	ByteString The bytes for status to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setTargetVpnGateway(String value)

public VpnTunnel.Builder setTargetVpnGateway(String value)

URL of the Target VPN gateway with which this VPN tunnel is associated. Provided by the client when the VPN tunnel is created.

optional string target_vpn_gateway = 532512843;

Parameter

Name	Description
value	String The targetVpnGateway to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setTargetVpnGatewayBytes(ByteString value)

public VpnTunnel.Builder setTargetVpnGatewayBytes(ByteString value)

URL of the Target VPN gateway with which this VPN tunnel is associated. Provided by the client when the VPN tunnel is created.

optional string target_vpn_gateway = 532512843;

Parameter

Name	Description
value	ByteString The bytes for targetVpnGateway to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setUnknownFields(UnknownFieldSet unknownFields)

public final VpnTunnel.Builder setUnknownFields(UnknownFieldSet unknownFields)

Parameter

Name	Description
unknownFields	UnknownFieldSet

Returns

Type	Description
VpnTunnel.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.setUnknownFields(UnknownFieldSet unknownFields)

setVpnGateway(String value)

public VpnTunnel.Builder setVpnGateway(String value)

URL of the VPN gateway with which this VPN tunnel is associated. Provided by the client when the VPN tunnel is created. This must be used (instead of target_vpn_gateway) if a High Availability VPN gateway resource is created.

optional string vpn_gateway = 406684153;

Parameter

Name	Description
value	String The vpnGateway to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setVpnGatewayBytes(ByteString value)

public VpnTunnel.Builder setVpnGatewayBytes(ByteString value)

URL of the VPN gateway with which this VPN tunnel is associated. Provided by the client when the VPN tunnel is created. This must be used (instead of target_vpn_gateway) if a High Availability VPN gateway resource is created.

optional string vpn_gateway = 406684153;

Parameter

Name	Description
value	ByteString The bytes for vpnGateway to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.

setVpnGatewayInterface(int value)

public VpnTunnel.Builder setVpnGatewayInterface(int value)

The interface ID of the VPN gateway with which this VPN tunnel is associated.

optional int32 vpn_gateway_interface = 95979123;

Parameter

Name	Description
value	int The vpnGatewayInterface to set.

Returns

Type	Description
VpnTunnel.Builder	This builder for chaining.