Interface HTTP2HealthCheckOrBuilder (1.15.0)

public interface HTTP2HealthCheckOrBuilder extends MessageOrBuilder

Implements

MessageOrBuilder

Methods

getHost()

public abstract String getHost()

The value of the host header in the HTTP/2 health check request. If left empty (default value), the host header is set to the destination IP address to which health check packets are sent. The destination IP address depends on the type of load balancer. For details, see: https://cloud.google.com/load-balancing/docs/health-check-concepts#hc-packet-dest

optional string host = 3208616;

Returns
TypeDescription
String

The host.

getHostBytes()

public abstract ByteString getHostBytes()

The value of the host header in the HTTP/2 health check request. If left empty (default value), the host header is set to the destination IP address to which health check packets are sent. The destination IP address depends on the type of load balancer. For details, see: https://cloud.google.com/load-balancing/docs/health-check-concepts#hc-packet-dest

optional string host = 3208616;

Returns
TypeDescription
ByteString

The bytes for host.

getPort()

public abstract int getPort()

The TCP port number to which the health check prober sends packets. The default value is 443. Valid values are 1 through 65535.

optional int32 port = 3446913;

Returns
TypeDescription
int

The port.

getPortName()

public abstract String getPortName()

Not supported.

optional string port_name = 41534345;

Returns
TypeDescription
String

The portName.

getPortNameBytes()

public abstract ByteString getPortNameBytes()

Not supported.

optional string port_name = 41534345;

Returns
TypeDescription
ByteString

The bytes for portName.

getPortSpecification()

public abstract String getPortSpecification()

Specifies how a port is selected for health checking. Can be one of the following values: USE_FIXED_PORT: Specifies a port number explicitly using the port field in the health check. Supported by backend services for pass-through load balancers and backend services for proxy load balancers. Not supported by target pools. The health check supports all backends supported by the backend service provided the backend can be health checked. For example, GCE_VM_IP network endpoint groups, GCE_VM_IP_PORT network endpoint groups, and instance group backends. USE_NAMED_PORT: Not supported. USE_SERVING_PORT: Provides an indirect method of specifying the health check port by referring to the backend service. Only supported by backend services for proxy load balancers. Not supported by target pools. Not supported by backend services for pass-through load balancers. Supports all backends that can be health checked; for example, GCE_VM_IP_PORT network endpoint groups and instance group backends. For GCE_VM_IP_PORT network endpoint group backends, the health check uses the port number specified for each endpoint in the network endpoint group. For instance group backends, the health check uses the port number determined by looking up the backend service's named port in the instance group's list of named ports. Check the PortSpecification enum for the list of possible values.

optional string port_specification = 51590597;

Returns
TypeDescription
String

The portSpecification.

getPortSpecificationBytes()

public abstract ByteString getPortSpecificationBytes()

Specifies how a port is selected for health checking. Can be one of the following values: USE_FIXED_PORT: Specifies a port number explicitly using the port field in the health check. Supported by backend services for pass-through load balancers and backend services for proxy load balancers. Not supported by target pools. The health check supports all backends supported by the backend service provided the backend can be health checked. For example, GCE_VM_IP network endpoint groups, GCE_VM_IP_PORT network endpoint groups, and instance group backends. USE_NAMED_PORT: Not supported. USE_SERVING_PORT: Provides an indirect method of specifying the health check port by referring to the backend service. Only supported by backend services for proxy load balancers. Not supported by target pools. Not supported by backend services for pass-through load balancers. Supports all backends that can be health checked; for example, GCE_VM_IP_PORT network endpoint groups and instance group backends. For GCE_VM_IP_PORT network endpoint group backends, the health check uses the port number specified for each endpoint in the network endpoint group. For instance group backends, the health check uses the port number determined by looking up the backend service's named port in the instance group's list of named ports. Check the PortSpecification enum for the list of possible values.

optional string port_specification = 51590597;

Returns
TypeDescription
ByteString

The bytes for portSpecification.

getProxyHeader()

public abstract String getProxyHeader()

Specifies the type of proxy header to append before sending data to the backend, either NONE or PROXY_V1. The default is NONE. Check the ProxyHeader enum for the list of possible values.

optional string proxy_header = 160374142;

Returns
TypeDescription
String

The proxyHeader.

getProxyHeaderBytes()

public abstract ByteString getProxyHeaderBytes()

Specifies the type of proxy header to append before sending data to the backend, either NONE or PROXY_V1. The default is NONE. Check the ProxyHeader enum for the list of possible values.

optional string proxy_header = 160374142;

Returns
TypeDescription
ByteString

The bytes for proxyHeader.

getRequestPath()

public abstract String getRequestPath()

The request path of the HTTP/2 health check request. The default value is /.

optional string request_path = 229403605;

Returns
TypeDescription
String

The requestPath.

getRequestPathBytes()

public abstract ByteString getRequestPathBytes()

The request path of the HTTP/2 health check request. The default value is /.

optional string request_path = 229403605;

Returns
TypeDescription
ByteString

The bytes for requestPath.

getResponse()

public abstract String getResponse()

Creates a content-based HTTP/2 health check. In addition to the required HTTP 200 (OK) status code, you can configure the health check to pass only when the backend sends this specific ASCII response string within the first 1024 bytes of the HTTP response body. For details, see: https://cloud.google.com/load-balancing/docs/health-check-concepts#criteria-protocol-http

optional string response = 196547649;

Returns
TypeDescription
String

The response.

getResponseBytes()

public abstract ByteString getResponseBytes()

Creates a content-based HTTP/2 health check. In addition to the required HTTP 200 (OK) status code, you can configure the health check to pass only when the backend sends this specific ASCII response string within the first 1024 bytes of the HTTP response body. For details, see: https://cloud.google.com/load-balancing/docs/health-check-concepts#criteria-protocol-http

optional string response = 196547649;

Returns
TypeDescription
ByteString

The bytes for response.

hasHost()

public abstract boolean hasHost()

The value of the host header in the HTTP/2 health check request. If left empty (default value), the host header is set to the destination IP address to which health check packets are sent. The destination IP address depends on the type of load balancer. For details, see: https://cloud.google.com/load-balancing/docs/health-check-concepts#hc-packet-dest

optional string host = 3208616;

Returns
TypeDescription
boolean

Whether the host field is set.

hasPort()

public abstract boolean hasPort()

The TCP port number to which the health check prober sends packets. The default value is 443. Valid values are 1 through 65535.

optional int32 port = 3446913;

Returns
TypeDescription
boolean

Whether the port field is set.

hasPortName()

public abstract boolean hasPortName()

Not supported.

optional string port_name = 41534345;

Returns
TypeDescription
boolean

Whether the portName field is set.

hasPortSpecification()

public abstract boolean hasPortSpecification()

Specifies how a port is selected for health checking. Can be one of the following values: USE_FIXED_PORT: Specifies a port number explicitly using the port field in the health check. Supported by backend services for pass-through load balancers and backend services for proxy load balancers. Not supported by target pools. The health check supports all backends supported by the backend service provided the backend can be health checked. For example, GCE_VM_IP network endpoint groups, GCE_VM_IP_PORT network endpoint groups, and instance group backends. USE_NAMED_PORT: Not supported. USE_SERVING_PORT: Provides an indirect method of specifying the health check port by referring to the backend service. Only supported by backend services for proxy load balancers. Not supported by target pools. Not supported by backend services for pass-through load balancers. Supports all backends that can be health checked; for example, GCE_VM_IP_PORT network endpoint groups and instance group backends. For GCE_VM_IP_PORT network endpoint group backends, the health check uses the port number specified for each endpoint in the network endpoint group. For instance group backends, the health check uses the port number determined by looking up the backend service's named port in the instance group's list of named ports. Check the PortSpecification enum for the list of possible values.

optional string port_specification = 51590597;

Returns
TypeDescription
boolean

Whether the portSpecification field is set.

hasProxyHeader()

public abstract boolean hasProxyHeader()

Specifies the type of proxy header to append before sending data to the backend, either NONE or PROXY_V1. The default is NONE. Check the ProxyHeader enum for the list of possible values.

optional string proxy_header = 160374142;

Returns
TypeDescription
boolean

Whether the proxyHeader field is set.

hasRequestPath()

public abstract boolean hasRequestPath()

The request path of the HTTP/2 health check request. The default value is /.

optional string request_path = 229403605;

Returns
TypeDescription
boolean

Whether the requestPath field is set.

hasResponse()

public abstract boolean hasResponse()

Creates a content-based HTTP/2 health check. In addition to the required HTTP 200 (OK) status code, you can configure the health check to pass only when the backend sends this specific ASCII response string within the first 1024 bytes of the HTTP response body. For details, see: https://cloud.google.com/load-balancing/docs/health-check-concepts#criteria-protocol-http

optional string response = 196547649;

Returns
TypeDescription
boolean

Whether the response field is set.