public abstract static class RetrySettings.BuilderA base builder class for RetrySettings. See the class documentation of RetrySettings for a description of the different values that can be set.
Constructors
Builder()
public Builder()Methods
build()
public RetrySettings build()| Returns | |
|---|---|
| Type | Description |
RetrySettings |
|
getInitialRetryDelay()
public final Duration getInitialRetryDelay()This method is obsolete. Use #getInitialRetryDelayDuration() instead
| Returns | |
|---|---|
| Type | Description |
org.threeten.bp.Duration |
|
getInitialRetryDelayDuration()
public abstract Duration getInitialRetryDelayDuration()InitialRetryDelay controls the delay before the first retry/ poll. Subsequent retries and polls will use this value adjusted according to the RetryDelayMultiplier.
If there are no configurations, Retries have the default initial retry delay value of
Duration.ZERO and LROs have a default initial poll delay value of
Duration.ofMillis(5000) (5 seconds).
| Returns | |
|---|---|
| Type | Description |
Duration |
|
getInitialRpcTimeout()
public final Duration getInitialRpcTimeout()This method is obsolete. Use #getInitialRpcTimeoutDuration() instead
| Returns | |
|---|---|
| Type | Description |
org.threeten.bp.Duration |
|
getInitialRpcTimeoutDuration()
public abstract Duration getInitialRpcTimeoutDuration()InitialRpcTimeout controls the timeout for the initial RPC. Subsequent calls will use this
value adjusted according to the RpcTimeoutMultiplier. RPC Timeout value of
Duration.ZERO allows the RPC to continue indefinitely (until it hits a Connect Timeout or
the connection has been terminated).
#getTotalTimeout() caps how long the logic should keep trying the RPC until it gives up completely. If #getTotalTimeout() is set, initialRpcTimeout should be <= totalTimeout.
If there are no configurations, Retries have the default initial RPC timeout value of
Duration.ZERO. LRO polling does not use the Initial RPC Timeout value.
| Returns | |
|---|---|
| Type | Description |
Duration |
|
getMaxAttempts()
public abstract int getMaxAttempts()MaxAttempts defines the maximum number of retry attempts to perform. If this value is set to 0, the logic will instead use the totalTimeout value to determine retries. In the event that both the maxAttempts and totalTimeout values are both 0, the logic will not retry. If this value is greater than 0, and the number of attempts exceeds this limit, the logic will give up retrying even if the total retry time is still lower than totalTimeout.
If there are no configurations, Retries and LROs have the default max attempt value of
0. LRO polling does not use this value by default.
The first RPC invocation will be considered attempt #0. Subsequent calls (retries) will increment the number of attempts and the number of attempts will not exceed this value.
| Returns | |
|---|---|
| Type | Description |
int |
|
getMaxRetryDelay()
public final Duration getMaxRetryDelay()This method is obsolete. Use #getMaxRetryDelayDuration() instead
| Returns | |
|---|---|
| Type | Description |
org.threeten.bp.Duration |
|
getMaxRetryDelayDuration()
public abstract Duration getMaxRetryDelayDuration()MaxRetryDelay puts a limit on the value of the retry delay, so that the RetryDelayMultiplier can't increase the retry delay higher than this amount.
If there are no configurations, Retries have the default max retry delay value of
Duration.ZERO and LROs have a default max poll retry delay value of
Duration.ofMillis(45000) (45 seconds).
| Returns | |
|---|---|
| Type | Description |
Duration |
|
getMaxRpcTimeout()
public final Duration getMaxRpcTimeout()This method is obsolete. Use #getMaxRpcTimeoutDuration() instead
| Returns | |
|---|---|
| Type | Description |
org.threeten.bp.Duration |
|
getMaxRpcTimeoutDuration()
public abstract Duration getMaxRpcTimeoutDuration()MaxRpcTimeout puts a limit on the value of the RPC timeout, so that the RpcTimeoutMultiplier can't increase the RPC timeout higher than this amount.
If there are no configurations, Retries have the default Max RPC Timeout value of
Duration.ZERO. LRO polling does not use the Max RPC Timeout value.
| Returns | |
|---|---|
| Type | Description |
Duration |
|
getRetryDelayMultiplier()
public abstract double getRetryDelayMultiplier()RetryDelayMultiplier controls the change in delay before the next retry or poll. The retry delay of the previous call is multiplied by the RetryDelayMultiplier to calculate the retry delay for the next call.
If there are no configurations, Retries have the default retry delay multiplier value of
1.0 and LROs have a default retry delay multiplier of 1.5.
| Returns | |
|---|---|
| Type | Description |
double |
|
getRpcTimeoutMultiplier()
public abstract double getRpcTimeoutMultiplier()RpcTimeoutMultiplier controls the change in RPC timeout. The timeout of the previous call is multiplied by the RpcTimeoutMultiplier to calculate the timeout for the next call.
If there are no configurations, Retries have the default RPC Timeout Multiplier value of
1.0. LRO polling does not use the RPC Timeout Multiplier value.
| Returns | |
|---|---|
| Type | Description |
double |
|
getTotalTimeout()
public final Duration getTotalTimeout()This method is obsolete. Use #getTotalTimeoutDuration() instead
| Returns | |
|---|---|
| Type | Description |
org.threeten.bp.Duration |
|
getTotalTimeoutDuration()
public abstract Duration getTotalTimeoutDuration()TotalTimeout has ultimate control over how long the logic should keep trying the remote call
until it gives up completely. The higher the total timeout, the more retries and polls can be
attempted. If this value is Duration.ZERO, then the logic will instead use the number
of attempts to determine retries. In the event that both maxAttempts and totalTimeout values
are both 0, the logic will not retry. If this value is non-Duration.ZERO, and the
retry duration has reaches the timeout value, the logic will give up retrying even the number
of attempts is lower than the maxAttempts value.
If there are no configurations, Retries have the default timeout value of
Duration.ZERO and LROs have a default total timeout value of
Duration.ofMillis(300000) (5 minutes).
| Returns | |
|---|---|
| Type | Description |
Duration |
|
isJittered()
public abstract boolean isJittered()Jitter determines if the delay time should be randomized. In most cases, if jitter is set to
true the actual delay time is calculated in the following way:
actualDelay = rand_between(0, min(maxRetryDelay, exponentialDelay)) The default value is true.
| Returns | |
|---|---|
| Type | Description |
boolean |
|
merge(RetrySettings.Builder newSettings)
public RetrySettings.Builder merge(RetrySettings.Builder newSettings)| Parameter | |
|---|---|
| Name | Description |
newSettings |
RetrySettings.Builder |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setInitialRetryDelay(Duration initialDelay)
public final RetrySettings.Builder setInitialRetryDelay(Duration initialDelay)This method is obsolete. Use #setInitialRetryDelayDuration(java.time.Duration) instead
| Parameter | |
|---|---|
| Name | Description |
initialDelay |
org.threeten.bp.Duration |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setInitialRetryDelayDuration(Duration initialDelay)
public abstract RetrySettings.Builder setInitialRetryDelayDuration(Duration initialDelay)InitialRetryDelay controls the delay before the first retry/ poll. Subsequent retries and polls will use this value adjusted according to the RetryDelayMultiplier.
If there are no configurations, Retries have the default initial retry delay value of
Duration.ZERO and LROs have a default initial poll delay value of
Duration.ofMillis(5000) (5 seconds).
| Parameter | |
|---|---|
| Name | Description |
initialDelay |
Duration |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setInitialRpcTimeout(Duration initialTimeout)
public final RetrySettings.Builder setInitialRpcTimeout(Duration initialTimeout)This method is obsolete. Use #setInitialRpcTimeoutDuration(java.time.Duration) instead
| Parameter | |
|---|---|
| Name | Description |
initialTimeout |
org.threeten.bp.Duration |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setInitialRpcTimeoutDuration(Duration initialTimeout)
public abstract RetrySettings.Builder setInitialRpcTimeoutDuration(Duration initialTimeout)InitialRpcTimeout controls the timeout for the initial RPC. Subsequent calls will use this
value adjusted according to the RpcTimeoutMultiplier. RPC Timeout value of
Duration.ZERO allows the RPC to continue indefinitely (until it hits a Connect Timeout or
the connection has been terminated).
#getTotalTimeout() caps how long the logic should keep trying the RPC until it gives up completely. If #getTotalTimeout() is set, initialRpcTimeout should be <= totalTimeout.
If there are no configurations, Retries have the default initial RPC timeout value of
Duration.ZERO. LRO polling does not use the Initial RPC Timeout value.
| Parameter | |
|---|---|
| Name | Description |
initialTimeout |
Duration |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setJittered(boolean jittered) (deprecated)
public abstract RetrySettings.Builder setJittered(boolean jittered)Deprecated. Retries always jitter.
Jitter determines if the delay time should be randomized. If jitter is set to true
the actual delay time is calculated in the following way:
actualDelay = rand_between(0, min(maxRetryDelay, exponentialDelay)) The default value is true, and this method will be a no-op soon.
| Parameter | |
|---|---|
| Name | Description |
jittered |
boolean |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setLogicalTimeout(Duration timeout)
public RetrySettings.Builder setLogicalTimeout(Duration timeout)Configures the timeout settings with the given timeout such that the logical call will take no longer than the given timeout and each RPC attempt will use only the time remaining in the logical call as a timeout.
Using this method in conjunction with individual RetrySettings timeout field setters is not advised, because only the order in which they are invoked determines which setter is respected.
| Parameter | |
|---|---|
| Name | Description |
timeout |
Duration |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setLogicalTimeout(Duration timeout)
public RetrySettings.Builder setLogicalTimeout(Duration timeout)This method is obsolete. Use #setLogicalTimeout(java.time.Duration) instead.
| Parameter | |
|---|---|
| Name | Description |
timeout |
org.threeten.bp.Duration |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setMaxAttempts(int maxAttempts)
public abstract RetrySettings.Builder setMaxAttempts(int maxAttempts)MaxAttempts defines the maximum number of retry attempts to perform. If this value is set to 0, the logic will instead use the totalTimeout value to determine retries. In the event that both the maxAttempts and totalTimeout values are both 0, the logic will not retry. If this value is greater than 0, and the number of attempts exceeds this limit, the logic will give up retrying even if the total retry time is still lower than totalTimeout.
If there are no configurations, Retries and LROs have the default max attempt value of
0. LRO polling does not use this value by default.
The first RPC invocation will be considered attempt #0. Subsequent calls (retries) will increment the number of attempts and the number of attempts will not exceed this value.
| Parameter | |
|---|---|
| Name | Description |
maxAttempts |
int |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setMaxRetryDelay(Duration maxDelay)
public final RetrySettings.Builder setMaxRetryDelay(Duration maxDelay)This method is obsolete. Use #setMaxRetryDelayDuration(java.time.Duration) instead
| Parameter | |
|---|---|
| Name | Description |
maxDelay |
org.threeten.bp.Duration |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setMaxRetryDelayDuration(Duration maxDelay)
public abstract RetrySettings.Builder setMaxRetryDelayDuration(Duration maxDelay)MaxRetryDelay puts a limit on the value of the retry delay, so that the RetryDelayMultiplier can't increase the retry delay higher than this amount.
If there are no configurations, Retries have the default max retry delay value of
Duration.ZERO and LROs have a default max poll retry delay value of
Duration.ofMillis(45000) (45 seconds).
| Parameter | |
|---|---|
| Name | Description |
maxDelay |
Duration |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setMaxRpcTimeout(Duration maxTimeout)
public final RetrySettings.Builder setMaxRpcTimeout(Duration maxTimeout)This method is obsolete. Use #setMaxRpcTimeoutDuration(java.time.Duration) instead
| Parameter | |
|---|---|
| Name | Description |
maxTimeout |
org.threeten.bp.Duration |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setMaxRpcTimeoutDuration(Duration maxTimeout)
public abstract RetrySettings.Builder setMaxRpcTimeoutDuration(Duration maxTimeout)MaxRpcTimeout puts a limit on the value of the RPC timeout, so that the RpcTimeoutMultiplier can't increase the RPC timeout higher than this amount.
If there are no configurations, Retries have the default Max RPC Timeout value of
Duration.ZERO. LRO polling does not use the Max RPC Timeout value.
| Parameter | |
|---|---|
| Name | Description |
maxTimeout |
Duration |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setRetryDelayMultiplier(double multiplier)
public abstract RetrySettings.Builder setRetryDelayMultiplier(double multiplier)RetryDelayMultiplier controls the change in delay before the next retry or poll. The retry delay of the previous call is multiplied by the RetryDelayMultiplier to calculate the retry delay for the next call.
If there are no configurations, Retries have the default retry delay multiplier value of
1.0 and LROs have a default retry delay multiplier of 1.5.
| Parameter | |
|---|---|
| Name | Description |
multiplier |
double |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setRpcTimeoutMultiplier(double multiplier)
public abstract RetrySettings.Builder setRpcTimeoutMultiplier(double multiplier)RpcTimeoutMultiplier controls the change in RPC timeout. The timeout of the previous call is multiplied by the RpcTimeoutMultiplier to calculate the timeout for the next call.
If there are no configurations, Retries have the default RPC Timeout Multiplier value of
1.0. LRO polling does not use the RPC Timeout Multiplier value.
| Parameter | |
|---|---|
| Name | Description |
multiplier |
double |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setTotalTimeout(Duration totalTimeout)
public final RetrySettings.Builder setTotalTimeout(Duration totalTimeout)This method is obsolete. Use #setTotalTimeoutDuration(java.time.Duration) instead
| Parameter | |
|---|---|
| Name | Description |
totalTimeout |
org.threeten.bp.Duration |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|
setTotalTimeoutDuration(Duration totalTimeout)
public abstract RetrySettings.Builder setTotalTimeoutDuration(Duration totalTimeout)TotalTimeout has ultimate control over how long the logic should keep trying the remote call
until it gives up completely. The higher the total timeout, the more retries and polls can be
attempted. If this value is Duration.ZERO, then the logic will instead use the number
of attempts to determine retries. In the event that both maxAttempts and totalTimeout values
are both 0, the logic will not retry. If this value is non-Duration.ZERO, and the
retry duration has reaches the timeout value, the logic will give up retrying even the number
of attempts is lower than the maxAttempts value.
If there are no configurations, Retries have the default timeout value of
Duration.ZERO and LROs have a default total timeout value of
Duration.ofMillis(300000) (5 minutes).
| Parameter | |
|---|---|
| Name | Description |
totalTimeout |
Duration |
| Returns | |
|---|---|
| Type | Description |
RetrySettings.Builder |
|