Overview
Database Migration Service uses migration jobs to migrate data from your source database instance to the destination database instance. Creating a migration job for an existing destination instance includes:
- Defining settings for the migration job
- Selecting the source database connection profile
- Selecting the existing destination database instance
- Demoting the existing instance to convert it into a read replica
- Setting up connectivity between the source and destination database instances
- Testing the migration job to ensure that the connection information you provided for the job is valid
There are certain limitations that you should consider when you want to migrate to a destination instance created outside of Database Migration Service. For more information, see Known Limitations.
Create a migration job by using the Google Cloud console
Define settings for the migration job
Go to the Migration jobs in the Google Cloud console.
Click Create migration job at the top of the page.
Provide a name for the migration job. Choose a friendly name that helps you identify the migration job. Don't include sensitive or personally identifiable information in the job name.
Keep the auto-generated Migration job ID.
Select the source database engine.
Select AlloyDB for PostgreSQL as the destination engine.
Select the destination region for your migration. This region must be the same as the one where your destination database is located. After you choose the destination region, this selection can't be changed.
Choose Continuous (snapshot + ongoing changes) as the migration job type.
In the Before you continue, review the prerequisites section, click Open to view automatically generated instructions that can help guide you through preparing your source database for the migration. It's best to complete these prerequisites at this step, but you can complete them at any time before you test, or start, the migration job. For more information, see Configure your source.
Click Save and continue.
Specify information about the source connection profile
-
If you have created a connection profile, then select it from the list of existing connection profiles.
If you haven't created a connection profile, then create one by clicking Create a connection profile at the bottom of the drop-down list, and then perform the same steps as in Create a source connection profile.
It is recommended to create a designated connection profile for your AlloyDB migration.
- In the Customize data dump configurations section,
click Show data dump configurations.
The speed of data dump parallelism is related to the amount of load on your source database. You can use the following settings:
- Optimal (recommended): Balanced performance with optimal load on the source database.
- Maximum: Provides the highest dump speeds, but might cause increased load on the source database.
- Minimum: Takes the lowest amount of compute resources on the source database, but might have slower dump throughput.
If you want to use adjusted data dump parallelism settings, make sure to increase the
max_replication_slots
,max_wal_senders
, andmax_worker_processes
parameters on your source database. You can verify your configuration by running the migration job test at the end of migration job creation. - Click Save and continue.
Select the destination instance
From the Type of destination instance menu, select Existing instance.
In the Select destination instance section, select your destination instance.
Review the information in the Instance details section, and click Select and continue.
To migrate to an existing destination database, Database Migration Service demotes the target instance and converts it to a replica. To signify that the demotion can be safely performed, in the confirmation window, enter the destination instance identifier.
Click Confirm and continue.
Set up connectivity between the source and destination database instances
From the Connectivity method drop-down menu, select a network connectivity method. This method defines how the newly created AlloyDB instance will connect to the source database. Current network connectivity methods include VPC peering, reverse SSH tunnel, and TCP proxy through a cloud-hosted VM.
If you select the reverse SSH tunnel network connectivity method, then select the Compute Engine VM instance that will host the tunnel.
After specifying the instance, Google will provide a script that performs the steps to set up the tunnel between the source and destination databases. You'll need to run the script in the Google Cloud CLI.
Run the commands from a machine that has connectivity to both the source database and to Google Cloud.
- If you select the VPC peering network connectivity method, then select the VPC network where the source database resides. The Cloud SQL instance will be updated to connect to this network.
If you select the TCP Proxy via cloud-hosted VM connectivity method, then enter the required details for the new Compute Engine VM instance that will host the TCP proxy.
After specifying the details, the Google Cloud console will provide a script that performs the steps to set up the proxy between the source and destination databases. You'll need to run the script on a machine with an updated Google Cloud CLI.
After running the script, it will output the newly created VM's private IP. Enter the IP and click Configure & continue.
- Learn more about how to Configure connectivity.
After selecting the network connectivity method and providing any additional information for the method, click CONFIGURE & CONTINUE.
Test and create the migration job
On this final step, review the summary of the migration job settings, source, destination, and connectivity method, and then test the validity of the migration job setup. If any issues are encountered, then you can modify the migration job's settings. Not all settings are editable.
Click TEST JOB to verify that:
- The source database has been configured correctly, based on the prerequisites.
- The source and destination instances can communicate with each other.
- Any updates to private IP addresses needed on the destination are done.
- The migration job is valid, and the source and destination versions are compatible.
If the test fails, then you can address the problem in the appropriate part of the flow, and return to re-test.
The migration job can be created even if the test fails, but after the job is started, it may fail at some point during the run.
Click CREATE & START JOB to create the migration job and start it immediately, or click CREATE JOB to create the migration job without immediately starting it.
If the job isn't started at the time that it's created, then it can be started from the Migration jobs page by clicking START.
Regardless of when the migration job starts, your organization is charged for the existence of the destination instance.
When you start the migration job, Database Migration Service begins the full dump, briefly locking the source database. If your source is in Amazon RDS or Amazon Aurora, Database Migration Service additionally requires a short (approximately under a minute) write downtime at the start of the migration. For more information, see Data dump parallelism considerations.
The migration job is added to the migration jobs list and can be viewed directly.
Proceed to Review the migration job.
Create a migration job by using Google Cloud CLI
When you migrate to an existing instance by using Google Cloud CLI, you must manually create the connection profile for the destination instance. This isn't required when you use the Google Cloud console, as Database Migration Service takes care of creating and removing the destination connection profile for you.
Before you begin
Before you use gcloud CLI to create a migration job to an existing destination database instance, make sure you:
- Create your destination database instance.
- Prepare your source database instance. See:
- Configure your source
- Create the source connection profile (Source connection profile identifier is required to create a migration job.)
- Configure connectivity
Create destination connection profile
Create the destination connection profile for your existing destination instance
by running the
gcloud database-migration connection-profiles create
command:
This sample uses the optional --no-async
flag so that all operations
are performed synchronously. This means that some commands might take
a while to complete. You can skip the --no-async
flag to run commands asynchronously.
If you do, you need to use the
gcloud database-migration operations describe
command to verify if your operation
is successful.
Before using any of the command data below, make the following replacements:
- CONNECTION_PROFILE_ID with a machine-readable identifier for your connection profile.
- REGION with the identifier of the region where you want to save the connection profile.
- DESTINATION_INSTANCE_ID with the instance identifier of your destination instance.
- (Optional) CONNECTION_PROFILE_NAME with a human-readable name for your connection profile. This value is displayed in the Google Cloud console.
Execute the following command:
Linux, macOS, or Cloud Shell
gcloud database-migration connection-profiles \ create postgresql CONNECTION_PROFILE_ID \ --no-async \ --alloydb-cluster=DESTINATION_INSTANCE_ID \ --region=REGION \ --display-name=CONNECTION_PROFILE_NAME
Windows (PowerShell)
gcloud database-migration connection-profiles ` create postgresql CONNECTION_PROFILE_ID ` --no-async ` --alloydb-cluster=DESTINATION_INSTANCE_ID ` --region=REGION ` --display-name=CONNECTION_PROFILE_NAME
Windows (cmd.exe)
gcloud database-migration connection-profiles ^ create postgresql CONNECTION_PROFILE_ID ^ --no-async ^ --alloydb-cluster=DESTINATION_INSTANCE_ID ^ --region=REGION ^ --display-name=CONNECTION_PROFILE_NAME
You should receive a response similar to the following:
Waiting for connection profile [CONNECTION_PROFILE_ID] to be created with [OPERATION_ID] Waiting for operation [OPERATION_ID] to complete...done. Created connection profile CONNECTION_PROFILE_ID [OPERATION_ID]
Create the migration job
This sample uses the optional --no-async
flag so that all operations
are performed synchronously. This means that some commands might take
a while to complete. You can skip the --no-async
flag to run commands asynchronously.
If you do, you need to use the
gcloud database-migration operations describe
command to verify if your operation
is successful.
Before using any of the command data below, make the following replacements:
- MIGRATION_JOB_ID with a machine-readable identifier for your migration job. You use this value to work with migration jobs by using Database Migration Service Google Cloud CLI commands or API.
- REGION with the region identifier where you want to save the migration job.
- MIGRATION_JOB_NAME with a human-readable name for your migration job. This value is displayed in Database Migration Service in the Google Cloud console.
- SOURCE_CONNECTION_PROFILE_ID with a machine-readable identifier of the source connection profile.
- DESTINATION_CONNECTION_PROFILE_ID with a machine-readable identifier of the destination connection profile.
Execute the following command:
Linux, macOS, or Cloud Shell
gcloud database-migration migration-jobs \ create MIGRATION_JOB_ID \ --no-async \ --region=REGION \ --display-name=MIGRATION_JOB_NAME \ --source=SOURCE_CONNECTION_PROFILE_ID \ --destination=DESTINATION_CONNECTION_PROFILE_ID \ --type=CONTINUOUS \
Windows (PowerShell)
gcloud database-migration migration-jobs ` create MIGRATION_JOB_ID ` --no-async ` --region=REGION ` --display-name=MIGRATION_JOB_NAME ` --source=SOURCE_CONNECTION_PROFILE_ID ` --destination=DESTINATION_CONNECTION_PROFILE_ID ` --type=CONTINUOUS `
Windows (cmd.exe)
gcloud database-migration migration-jobs ^ create MIGRATION_JOB_ID ^ --no-async ^ --region=REGION ^ --display-name=MIGRATION_JOB_NAME ^ --source=SOURCE_CONNECTION_PROFILE_ID ^ --destination=DESTINATION_CONNECTION_PROFILE_ID ^ --type=CONTINUOUS ^
You should receive a response similar to the following:
Waiting for migration job [MIGRATION_JOB_ID] to be created with [OPERATION_ID] Waiting for operation [OPERATION_ID] to complete...done. Created migration job MIGRATION_JOB_ID [OPERATION_ID]
Demote the destination database
Database Migration Service requires that the destination database instance
works as a read replica for the time of migration. Before you start the
migration job, run the
gcloud database-migration migration-jobs demote-destination
command to demote the destination database instance.
Before using any of the command data below, make the following replacements:
- MIGRATION_JOB_ID with
your migration job identifier.
If you don't know the identifier, you can use the
gcloud database-migration migration-jobs list
command to list all migration jobs in a given region and view their identifiers. - REGION with the identifier of the region where your connection profile is saved.
Execute the following command:
Linux, macOS, or Cloud Shell
gcloud database-migration migration-jobs \ demote-destination MIGRATION_JOB_ID \ --region=REGION
Windows (PowerShell)
gcloud database-migration migration-jobs ` demote-destination MIGRATION_JOB_ID ` --region=REGION
Windows (cmd.exe)
gcloud database-migration migration-jobs ^ demote-destination MIGRATION_JOB_ID ^ --region=REGION
Result
The action is performed in an asynchronous manner. As such, this command returns an Operation entity that represents a long-running operation:
done: false metadata: '@type': type.googleapis.com/google.cloud.clouddms.v1.OperationMetadata apiVersion: v1 createTime: '2024-02-20T12:20:24.493106418Z' requestedCancellation: false target: MIGRATION_JOB_ID verb: demote-destination name: OPERATION_ID
To see if your operation is successful, you can query the returned operation object, or check the status of the migration job:
- Use the
gcloud database-migration migration-jobs describe
command to view the status of the migration job. - Use the
gcloud database-migration operations describe
with the OPERATION_ID to see the status of the operation itself.
Manage migration jobs
At this point, your migration job is configured and connected to your
destination database instance. You can manage it by using the
verify
,start
, stop
, restart
, and resume
operations.
Verify the migration job
We recommend you first verify your migration job, by running the
gcloud database-migration migration-jobs verify
command.
Before using any of the command data below, make the following replacements:
- MIGRATION_JOB_ID with
your migration job identifier.
If you don't know the identifier, you can use the
gcloud database-migration migration-jobs list
command to list all migration jobs in a given region and view their identifiers. - REGION with the identifier of the region where your connection profile is saved.
Execute the following command:
Linux, macOS, or Cloud Shell
gcloud database-migration migration-jobs \ verify MIGRATION_JOB_ID \ --region=REGION
Windows (PowerShell)
gcloud database-migration migration-jobs ` verify MIGRATION_JOB_ID ` --region=REGION
Windows (cmd.exe)
gcloud database-migration migration-jobs ^ verify MIGRATION_JOB_ID ^ --region=REGION
Result
The action is performed in an asynchronous manner. As such, this command returns an Operation entity that represents a long-running operation:
done: false metadata: '@type': type.googleapis.com/google.cloud.clouddms.v1.OperationMetadata apiVersion: v1 createTime: '2024-02-20T12:20:24.493106418Z' requestedCancellation: false target: MIGRATION_JOB_ID verb: verify name: OPERATION_ID
To see if your operation is successful, you can query the returned operation object, or check the status of the migration job:
- Use the
gcloud database-migration migration-jobs describe
command with the MIGRATION_JOB_ID to view the status of the migration job. - Use the
gcloud database-migration operations describe
command with the OPERATION_ID to see the status of the operation itself.
Start the migration job
Start the migration job by running the
gcloud database-migration migration-jobs start
command.
Before using any of the command data below, make the following replacements:
- MIGRATION_JOB_ID with
your migration job identifier.
If you don't know the identifier, you can use the
gcloud database-migration migration-jobs list
command to list all migration jobs in a given region and view their identifiers. - REGION with the identifier of the region where your connection profile is saved.
Execute the following command:
Linux, macOS, or Cloud Shell
gcloud database-migration migration-jobs \ start MIGRATION_JOB_ID \ --region=REGION
Windows (PowerShell)
gcloud database-migration migration-jobs ` start MIGRATION_JOB_ID ` --region=REGION
Windows (cmd.exe)
gcloud database-migration migration-jobs ^ start MIGRATION_JOB_ID ^ --region=REGION
Result
The action is performed in an asynchronous manner. As such, this command returns an Operation entity that represents a long-running operation:
done: false metadata: '@type': type.googleapis.com/google.cloud.clouddms.v1.OperationMetadata apiVersion: v1 createTime: '2024-02-20T12:20:24.493106418Z' requestedCancellation: false target: MIGRATION_JOB_ID verb: start name: OPERATION_ID
To see if your operation is successful, you can query the returned operation object, or check the status of the migration job:
- Use the
gcloud database-migration migration-jobs describe
command with the MIGRATION_JOB_ID to view the status of the migration job. - Use the
gcloud database-migration operations describe
command with the OPERATION_ID to see the status of the operation itself.
Promote the migration job
Once the migration reaches the Change Data Capture (CDC) phase,
you can promote the destination database
instance from a read replica to a standalone instance.
Run the gcloud database-migration migration-jobs promote
command:
Before using any of the command data below, make the following replacements:
- MIGRATION_JOB_ID with
your migration job identifier.
If you don't know the identifier, you can use the
gcloud database-migration migration-jobs list
command to list all migration jobs in a given region and view their identifiers. - REGION with the identifier of the region where your connection profile is saved.
Execute the following command:
Linux, macOS, or Cloud Shell
gcloud database-migration migration-jobs \ promote MIGRATION_JOB_ID \ --region=REGION
Windows (PowerShell)
gcloud database-migration migration-jobs ` promote MIGRATION_JOB_ID ` --region=REGION
Windows (cmd.exe)
gcloud database-migration migration-jobs ^ promote MIGRATION_JOB_ID ^ --region=REGION
Result
The action is performed in an asynchronous manner. As such, this command returns an Operation entity that represents a long-running operation:
done: false metadata: '@type': type.googleapis.com/google.cloud.clouddms.v1.OperationMetadata apiVersion: v1 createTime: '2024-02-20T12:20:24.493106418Z' requestedCancellation: false target: MIGRATION_JOB_ID verb: start name: OPERATION_ID
- Use the
gcloud database-migration migration-jobs describe
command with the MIGRATION_JOB_ID to view the status of the migration job. - Use the
gcloud database-migration operations describe
command with the OPERATION_ID to see the status of the operation itself.
Except as otherwise noted, the content of this page is licensed under the Creative Commons Attribution 4.0 License, and code samples are licensed under the Apache 2.0 License. For details, see the Google Developers Site Policies. Java is a registered trademark of Oracle and/or its affiliates.
Last updated 2024-11-19 UTC.