Google Spectrum Access System (SAS)은 Google Cloud 플랫폼 (Google Cloud)의 일부입니다.
SAS와 상호작용하려면 Google Cloud고객이어야 하며Google Cloud 플랫폼을 사용하여 SAS 서비스를 프로비저닝해야 합니다.
주요 개념
Google Cloud 플랫폼 (Google Cloud): Google에서 최종 사용자 제품에 사용하는 것과 동일한 인프라에서 실행되는 클라우드 컴퓨팅 서비스 모음입니다. 아직 계정이 없다면 Google Cloud 시작하기 전에에서 계정을 만드세요.
Google Cloud 콘솔: Google Cloud 프로젝트 및 리소스를 관리하는 데 사용할 수 있는 웹 기반 그래픽 사용자 인터페이스입니다. 결제 관리 및 지원 액세스에도 사용할 수 있습니다.
Google Cloud organization: 모든 Google Cloud 리소스의 최상위 컨테이너입니다.
Cloud ID 또는 Google Workspace에 가입하면 Google Cloud 조직이 생성됩니다. 권장되는 Cloud Customer Care 지원 패키지에 가입하는 경우 Google Cloud 조직이 필요합니다.
Spectrum Access System (SAS): 우선순위가 낮은 기기의 채널 또는 전송 전력과 같은 운영 매개변수를 제어하여 우선순위가 높은 사용자를 보호하는 클라우드 서비스입니다.
시민 광대역 무선 서비스 (CBRS): 공유할 수 있는 3,550메가헤르츠 (MHz)~3,700MHz의 스펙트럼 대역입니다.
시민 광대역 무선 서비스 기기 (CBSD): SAS의 승인을 받은 후 시민 광대역 무선 서비스 (CBRS) 스펙트럼에서 작동하는 무선입니다.
사용자 ID: CBSD의 소유자 및 운영자의 고유 식별자로, SAS에 CBSD를 등록할 때 사용합니다.
프로젝트 ID: Google Cloud 플랫폼 프로젝트의 전역 고유 식별자입니다. 사용자 또는 조직 Google Cloud 관리자가 프로젝트 ID를 선택하며, 이 ID는 이 가이드의 프로비저닝 단계에 따라 첫 번째 배포의 사용자 ID로 사용됩니다.
SAS 조직: SAS 고객 계정이라고도 하며 SAS 포털의 최상위 조직 단위입니다. 대부분의 회사는 단일 SAS 조직을 보유하고 있으며 이 조직 아래에 여러 개의 배포가 있을 수 있습니다. 이 가이드의 프로비저닝 단계에서 SAS 조직의 이름을 만들고 선택합니다.
SAS 배포: SAS 조직 리소스 아래에 있는 SAS 리소스입니다. 각 배포는 단일 사용자 ID와 연결됩니다. SAS 조직에는 여러 배포가 포함될 수 있으며 각 배포에는 일반적으로 여러 CBSD가 포함됩니다.
SAS 서비스를 프로비저닝할 때는 선택한 Google Cloud 플랫폼 프로젝트 ID와 일치하는 사용자 ID가 있는 첫 번째 배포를 만듭니다.
SAS 포털: SAS에 연결된 하나 이상의 CBSD를 관리하는 웹 인터페이스입니다. SAS Portal을 사용하여 사용자를 추가하고, CBSD 구성을 만들고, CBRS 네트워크의 상태를 확인할 수 있습니다. 프로비저닝 단계를 완료하면 g.co/sasportal로 이동하여 SAS 포털에 액세스할 수 있습니다.
시작하기 전에
Google SAS는 Google Cloud 플랫폼의 일부입니다. SAS 서비스를 프로비저닝하려면 연결된 결제 계정이 있는 Google Cloud 계정과 첫 번째 배포를 만들려는 Google Cloud 프로젝트가 필요합니다. Cloud Customer Care 지원 패키지에 가입하려면 Google Cloud 조직에 소속되어 있어야 합니다.
[[["이해하기 쉬움","easyToUnderstand","thumb-up"],["문제가 해결됨","solvedMyProblem","thumb-up"],["기타","otherUp","thumb-up"]],[["이해하기 어려움","hardToUnderstand","thumb-down"],["잘못된 정보 또는 샘플 코드","incorrectInformationOrSampleCode","thumb-down"],["필요한 정보/샘플이 없음","missingTheInformationSamplesINeed","thumb-down"],["번역 문제","translationIssue","thumb-down"],["기타","otherDown","thumb-down"]],["최종 업데이트: 2025-09-04(UTC)"],[],[],null,["# Provision the Spectrum Access System service\n\nThe Google Spectrum Access System (SAS) is part of the Google Cloud Platform (Google Cloud).\nTo interact with the SAS, you must be a Google Cloud\ncustomer and you must provision the SAS service using the\nGoogle Cloud Platform.\n| **Important:** Join the [Google SAS Community Support Forum](https://www.googlecloudcommunity.com/gc/Infrastructure-Compute-Storage/bd-p/cloud-infrastructure) to share ideas, resources, and questions you might have.\n\nKey concepts\n------------\n\n- **Google Cloud Platform (Google Cloud):** A suite of cloud computing services that run\n on the same infrastructure that Google uses for its end-user products. If you\n don't already have a Google Cloud account, create one in\n [Before you begin](#before-you-begin).\n\n- **Google Cloud Console**: A web-based graphical user interface that you can\n use to manage your Google Cloud projects and resources. You can also\n use this for billing management and accessing support.\n\n- **Google Cloud organization:** A top-level container for all of your Google Cloud resources.\n Your Google Cloud organization is created when you sign up for a Cloud Identity or\n Google Workspace. A Google Cloud organization is required if signing up for a\n recommended\n [Cloud Customer Care support package](https://cloud.google.com/support).\n\n- **Spectrum Access System (SAS):** A cloud service that ensures the\n protection of higher-priority users by controlling the operating parameters,\n such as channels or transmission power, of lower-priority devices.\n\n- **Citizens Broadband Radio Service (CBRS):** A spectrum band from 3550\n megahertz (MHz) to 3700 MHz that is available for shared use.\n\n- **Citizens Broadband Radio Service Device (CBSD):** A radio\n that operates in the Citizens Broadband Radio Service (CBRS) spectrum after\n receiving authorization from the SAS.\n\n- **User ID:** The unique identifier for the owner and operator of a CBSD,\n to use when registering CBSDs with the SAS.\n\n- **Project ID:** A globally unique identifier for your Google Cloud Platform\n project. You or the organization Google Cloud administrator chooses your project\n ID, and the ID is used as the user ID of your first deployment when following\n the provisioning steps in this guide.\n\n- **SAS organization:** Also known as a SAS\n [customer account](/spectrum-access-system/docs/key-terms#customer-acct),\n this is the highest organizational unit in the SAS Portal. Most\n companies have a single SAS organization under which they\n might have multiple deployments. You create and choose the name of your\n SAS organization in the provisioning steps in this guide.\n\n | **Note:** This is a separate concept from the *Google Cloud organization*.\n- **SAS deployment:** A SAS resource which exists\n under the SAS organization resource. Each deployment is\n associated with a single user ID. A SAS organization may contain\n multiple deployments, and each deployment typically contains multiple CBSDs.\n When you provision the SAS service, you create your first\n deployment which has a user ID matching the Google Cloud Platform\n project ID that you choose.\n\n- **SAS Portal:** A web interface that manages one or more\n CBSD connected to the SAS. You can use the\n SAS Portal to add users, create CBSD\n configurations, and view the status of your CBRS network. After you follow\n the provisioning steps, you have access to the SAS Portal by\n navigating to [g.co/sasportal](https://g.co/sasportal).\n\nBefore you begin\n----------------\n\nGoogle SAS is part of the Google Cloud Platform. To provision the\nSAS service, you need a Google Cloud account with an associated\nbilling account and a Google Cloud project in which you want to create your first\ndeployment. You also need to belong to a Google Cloud organization if you want to sign up for a\n[Cloud Customer Care support package](https://cloud.google.com/support).\n| **Note:** The project ID of the Google Cloud project used for provisioning becomes the default user ID of your first SAS deployment. Once you have registered CBSDs with SAS using a specific user ID, you cannot change that user ID without re-registering the devices to a new deployment.\n\n- If you aren't already a Google Cloud customer,\n [Sign up for Cloud Identity](/identity/docs/set-up-cloud-identity-admin).\n\n - After you have logged in with your new Cloud Identity, navigate to [My Billing Accounts](https://console.cloud.google.com/billing), click **Add Billing Account**, and follow the prompts to create a billing account.\n - Create a new Google Cloud project for provisioning your first SAS deployment as described in [Creating and managing projects](/resource-manager/docs/creating-managing-projects).\n- If your company already has a Google Cloud account, ask your organization's\n Google Cloud administrator to create a project for your first SAS deployment and grant you\n access. For more information, see\n [Creating and managing projects](/resource-manager/docs/creating-managing-projects).\n\n - The project must be linked to a billing account, see [Enable billing for a new project](/billing/docs/how-to/modify-project#enable_billing_for_a_new_project) for more information.\n - If you need to set up a new billing account for SAS, see [Create a new self-serve billing account](/billing/docs/how-to/create-billing-account).\n\nProvision the SAS service for your first deployment\n---------------------------------------------------\n\nTo provision the SAS service for your first deployment, complete the steps in this section.\nThese steps only apply to provisioning your first SAS deployment. To create additional SAS deployments, see\n[Create new deployments](/spectrum-access-system/docs/create-new-deployments).\n\n1. Navigate to the [SAS page in Google Cloud console](https://console.cloud.google.com/spectrum-access/).\n2. In the project selector, select the target Google Cloud project.\n3. When prompted, do the following:\n 1. Enable the SAS Portal API.\n 2. Enter a descriptive name of your SAS organization.\n 3. Confirm the UserID (URID) that you want to use for your first SAS deployment.\n 4. Click **Provision SAS Deployment** to complete the provisioning operation.\n 5. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas) to verify that you now have access to your new deployment.\n\nYou can go to the [SAS Portal](https://wirelessconnectivity.google.com/sas)\nto add users, create CBSD configurations, and view the status of\nyour CBRS network. You can also read further for more information about how to\n[Prepare to use SAS](#secure-the-following).\n\nPrepare to use SAS\n------------------\n\nEnsure the following are available or in place for you to use SAS:\n\n- Configure your CBSDs or domain proxy to point to `https://sas.goog/v1.2/`. Check with your CBSD vendor how to register your CBSDs with SAS.\n- Ensure you have a [Certified Professional Installer (CPI)](/spectrum-access-system/docs/key-terms#cpi) to sign the installation parameters of your CBSDs. You can get your CPI certification online with Google by completing the [Become a CBRS Certified Professional Installer by Google](https://www.coursera.org/learn/google-cbrs-cpi-training) Coursera course.\n\nWhat's next\n-----------\n\n- Learn how to create additional SAS deployments from the [Create a new deployment](/spectrum-access-system/docs/create-new-deployments) page.\n- Learn about [Citizens Broadband Radio Service Devices (CBSDs)](/spectrum-access-system/docs/cbsd/overview).\n- Peruse product videos and training sessions at the [SAS YouTube channel](https://www.youtube.com/channel/UCPRC_4Oip3BfdjHvMXNU4MQ/videos).\n- [Troubleshoot SAS issues](/spectrum-access-system/docs/troubleshooting)."]]
