선택사항: 여러 배포에 액세스할 수 있는 경우 배포 목록에서 배포를 선택한 다음 열기를 클릭합니다.
왼쪽에서 settings설정을 클릭합니다.
CBSD를 선택하려면 다음 중 하나를 실행합니다.
map지도 보기에서 CBSD 위치 마커를 클릭합니다.
table_chart표 보기에서 CBSD 행을 클릭합니다.
왼쪽에서 settings_input_antenna기기를 클릭한 다음 lock배포 설정 잠금 해제를 클릭합니다.
변경사항을 입력한 다음 다음 단계를 따르세요.
관리자 또는 편집자인 경우 저장 또는 CPI 준비 완료를 클릭합니다.
CPI인 경우 서명을 클릭합니다.
CBSD가 이미 등록된 경우 CBSD 구성 페이지의 대기 중인 변경사항 섹션에 업데이트된 매개변수 목록이 표시됩니다. 구성 상태가 초안으로 변경되어 비활성 상태의 새 CBSD 구성이 생성되었음을 나타냅니다. SAS는 여전히 마지막으로 성공한 등록의 활성 CBSD 구성을 사용하고 있으므로 CBSD 상태가 변경되지 않았습니다.
업데이트된 매개변수가 적용되도록 하려면 다음 단계를 따르세요.
CPI에 새 CBSD 구성에 서명해 달라고 요청합니다.
CBSD에서 새 등록 요청을 전송하도록 합니다.
CBSD 구성 삭제
CBSD 구성을 삭제하려면 수정 권한이 필요합니다. 등록되지 않은 상태의 CBSD 구성만 삭제할 수 있습니다.
[[["이해하기 쉬움","easyToUnderstand","thumb-up"],["문제가 해결됨","solvedMyProblem","thumb-up"],["기타","otherUp","thumb-up"]],[["이해하기 어려움","hardToUnderstand","thumb-down"],["잘못된 정보 또는 샘플 코드","incorrectInformationOrSampleCode","thumb-down"],["필요한 정보/샘플이 없음","missingTheInformationSamplesINeed","thumb-down"],["번역 문제","translationIssue","thumb-down"],["기타","otherDown","thumb-down"]],["최종 업데이트: 2025-09-04(UTC)"],[],[],null,["# Manage CBSD configuration\n\nYou can use the Google Spectrum Access System (SAS) Portal to create, sign, and\nupdate multiple Citizens Broadband Radio Service Device (CBSD) configurations from a CSV file.\n\nImport the CBSD configuration\n-----------------------------\n\nTo import [CBSD configurations](/spectrum-access-system/docs/portal#cbsd-config), you must be an Administrator,\nEditor, or [Certified Professional Installer (CPI)](/spectrum-access-system/docs/key-terms#cpi).\nLearn more about\n[user roles](/spectrum-access-system/docs/users-sasportal).\n\nIf you get an error when importing a CBSD configuration, it\nskips to the next row in the CSV file and continues. After the upload is\ncomplete, the importer generates an error report that identifies any lines that\nwere not imported.\n\nTo start the import, follow these steps:\n\n1. Open the deployment.\n 1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/welcome).\n 2. Click **View deployments**.\n 3. Optional: If you have access to multiple deployments or nodes, select the desired deployment or node, and then click **Open**.\n2. Import the CSV file.\n\n 1. Click file_upload **Import** , and then click computer **Computer**.\n 2. Select the custom CSV that you want to import, and then click **Open**. When you\n import your customized CSV, the SAS Portal tries to map your\n column headers to the required fields.\n\n | **Important:** If you use a custom CSV, make sure that the **Property** and **Label from files** fields match before importing.\n3. To save the new CBSD configurations, click **Upload**.\n\n4. When the import is complete, review for any errors. When you are finished,\n you get a list of CBSD configurations.\n\n| **Important:** For CPIs, the imported files in the **Sign CBSD** column that are marked as **Yes** show a status of **Signed** . Files that are marked as **No** show a status of **Ready for CPI**.\n\nEdit a CBSD configuration\n-------------------------\n\nIf you're an Administrator, Editor, or CPI,\nyou can edit the CBSD configurations in the Google\nSAS Portal.\n\nEdit the CBSD's configuration for the following:\n\n- When the CBSD configuration changes.\n- When the CBSD configuration details are incorrect.\n\n| **Important:** If you're a CPI, your certification requires you to make any needed changes to ensure that the SAS always has the correct CBSD parameters. This includes [re-registering the CBSD](/spectrum-access-system/docs/cbsd/register-deregister).\n\nTo edit CBSD configurations, follow these steps:\n\n1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/welcome).\n2. Click **View deployments**.\n3. Optional: If you have access to multiple deployments, select a deployment from the **Deployments** list, and then click **Open**.\n4. On the left, click settings **Settings**.\n5. To select a CBSD, do one of the following:\n - In map **Map view**, click the CBSD location marker.\n - In table_chart **Table view**, click the row of the CBSD.\n6. On the left, click settings_input_antenna **Device** , and then click lock **Unlock deployment settings**.\n7. Enter your changes, and then do the following:\n - If you are an Administrator or Editor, click **Save** or **Ready for CPI**.\n - If you are a CPI, click **Sign**.\n\n| **Important:** If you edit an **Active** configuration, an inactive configuration is created. You need to sign and re-register it before it can take effect.\n\nIf the CBSD is already registered, on the CBSD\nconfiguration page, the **Pending changes** section shows a list of\nupdated parameters. The configuration status changes to **Draft** to indicate\nthat a new inactive CBSD configuration has been created. Because\nSAS is still using the active CBSD configuration\nfrom the last successful registration, the CBSD status hasn't\nchanged.\n\nTo make the updated parameters take effect, do the following:\n\n- Ask a CPI to sign the new CBSD configuration.\n- Have the CBSD send a new registration request.\n\nDelete a CBSD configuration\n---------------------------\n\nTo delete a CBSD configuration, you need **Edit** permissions. You\ncan only delete CBSD configurations that have an unregistered\nstatus.\n\nTo delete a CBSD configuration, follow these steps:\n\n1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas).\n2. Click **View deployments**.\n3. Optional: If you have access to multiple deployments, select a deployment from the **Deployments** list, and then click **Open**.\n4. On the left, click settings **Settings**.\n5. To select the CBSD, do the following:\n - In map **Map view**, click the CBSD location marker.\n - In table_chart **Table view**, click the row of the CBSD.\n6. To find the device state, click the **Status** tab.\n7. If the device state is **Registered** , **Granted** , **Authorized** , or **Suspended** , you must [deregister the CBSD](#cbsd-deregister) before you delete the configuration.\n8. On the right, click more_vert**More** , and then click **Delete device**.\n\nDeregister a CBSD\n-----------------\n\nDeregistering a CBSD immediately stops its transmissions. If you\nplan to re-register the CBSD, new grants for the same power and\nchannel might be suspended until the next Coordinated Periodic Activities among\nSASs (CPAS) depending on nearby incumbent operators and PAL activity.\n\nTo deregister a CBSD, see\n[Register and deregister a CBSD](/spectrum-access-system/docs/cbsd/register-deregister).\n\nWhat's next\n-----------\n\n- Learn how to [validate CPI certification](/spectrum-access-system/docs/validate-cpi-certification).\n- Learn about [SAS sync](/spectrum-access-system/docs/sas-sync).\n- Learn about [Spectrum Access System](/spectrum-access-system/docs/overview).\n- Learn about [key SAS terms](/spectrum-access-system/docs/key-terms).\n- [Troubleshoot SAS issues](/spectrum-access-system/docs/troubleshooting)."]]
