Class ListAssetsRequest.Builder (2.45.0)

public static final class ListAssetsRequest.Builder extends GeneratedMessageV3.Builder<ListAssetsRequest.Builder> implements ListAssetsRequestOrBuilder

Request message for listing assets.

Protobuf type google.cloud.securitycenter.v1.ListAssetsRequest

Static Methods

getDescriptor()

public static final Descriptors.Descriptor getDescriptor()
Returns
TypeDescription
Descriptor

Methods

addRepeatedField(Descriptors.FieldDescriptor field, Object value)

public ListAssetsRequest.Builder addRepeatedField(Descriptors.FieldDescriptor field, Object value)
Parameters
NameDescription
fieldFieldDescriptor
valueObject
Returns
TypeDescription
ListAssetsRequest.Builder
Overrides

build()

public ListAssetsRequest build()
Returns
TypeDescription
ListAssetsRequest

buildPartial()

public ListAssetsRequest buildPartial()
Returns
TypeDescription
ListAssetsRequest

clear()

public ListAssetsRequest.Builder clear()
Returns
TypeDescription
ListAssetsRequest.Builder
Overrides

clearCompareDuration()

public ListAssetsRequest.Builder clearCompareDuration()

When compare_duration is set, the ListAssetsResult's "state_change" attribute is updated to indicate whether the asset was added, removed, or remained present during the compare_duration period of time that precedes the read_time. This is the time between (read_time - compare_duration) and read_time.

The state_change value is derived based on the presence of the asset at the two points in time. Intermediate state changes between the two times don't affect the result. For example, the results aren't affected if the asset is removed and re-created again.

Possible "state_change" values when compare_duration is specified:

  • "ADDED": indicates that the asset was not present at the start of compare_duration, but present at read_time.
  • "REMOVED": indicates that the asset was present at the start of compare_duration, but not present at read_time.
  • "ACTIVE": indicates that the asset was present at both the start and the end of the time period defined by compare_duration and read_time.

    If compare_duration is not specified, then the only possible state_change is "UNUSED", which will be the state_change set for all assets present at read_time.

.google.protobuf.Duration compare_duration = 5;

Returns
TypeDescription
ListAssetsRequest.Builder

clearField(Descriptors.FieldDescriptor field)

public ListAssetsRequest.Builder clearField(Descriptors.FieldDescriptor field)
Parameter
NameDescription
fieldFieldDescriptor
Returns
TypeDescription
ListAssetsRequest.Builder
Overrides

clearFieldMask()

public ListAssetsRequest.Builder clearFieldMask()

A field mask to specify the ListAssetsResult fields to be listed in the response. An empty field mask will list all fields.

.google.protobuf.FieldMask field_mask = 7;

Returns
TypeDescription
ListAssetsRequest.Builder

clearFilter()

public ListAssetsRequest.Builder clearFilter()

Expression that defines the filter to apply across assets. The expression is a list of zero or more restrictions combined via logical operators AND and OR. Parentheses are supported, and OR has higher precedence than AND.

Restrictions have the form <field> <operator> <value> and may have a - character in front of them to indicate negation. The fields map to those defined in the Asset resource. Examples include:

  • name
  • security_center_properties.resource_name
  • resource_properties.a_property
  • security_marks.marks.marka

    The supported operators are:

  • = for all value types.

  • >, <, >=, <= for integer values.
  • :, meaning substring matching, for strings.

    The supported value types are:

  • string literals in quotes.

  • integer literals without quotes.
  • boolean literals true and false without quotes.

    The following are the allowed field and operator combinations:

  • name: =

  • update_time: =, >, <, >=, <=

    Usage: This should be milliseconds since epoch or an RFC3339 string. Examples: update_time = "2019-06-10T16:07:18-07:00" update_time = 1560208038000

  • create_time: =, >, <, >=, <=

    Usage: This should be milliseconds since epoch or an RFC3339 string. Examples: create_time = "2019-06-10T16:07:18-07:00" create_time = 1560208038000

  • iam_policy.policy_blob: =, :

  • resource_properties: =, :, >, <, >=, <=
  • security_marks.marks: =, :
  • security_center_properties.resource_name: =, :
  • security_center_properties.resource_display_name: =, :
  • security_center_properties.resource_type: =, :
  • security_center_properties.resource_parent: =, :
  • security_center_properties.resource_parent_display_name: =, :
  • security_center_properties.resource_project: =, :
  • security_center_properties.resource_project_display_name: =, :
  • security_center_properties.resource_owners: =, :

    For example, resource_properties.size = 100 is a valid filter string.

    Use a partial match on the empty string to filter based on a property existing: resource_properties.my_property : ""

    Use a negated partial match on the empty string to filter based on a property not existing: -resource_properties.my_property : ""

string filter = 2;

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

clearOneof(Descriptors.OneofDescriptor oneof)

public ListAssetsRequest.Builder clearOneof(Descriptors.OneofDescriptor oneof)
Parameter
NameDescription
oneofOneofDescriptor
Returns
TypeDescription
ListAssetsRequest.Builder
Overrides

clearOrderBy()

public ListAssetsRequest.Builder clearOrderBy()

Expression that defines what fields and order to use for sorting. The string value should follow SQL syntax: comma separated list of fields. For example: "name,resource_properties.a_property". The default sorting order is ascending. To specify descending order for a field, a suffix " desc" should be appended to the field name. For example: "name desc,resource_properties.a_property". Redundant space characters in the syntax are insignificant. "name desc,resource_properties.a_property" and " name desc , resource_properties.a_property " are equivalent.

The following fields are supported: name update_time resource_properties security_marks.marks security_center_properties.resource_name security_center_properties.resource_display_name security_center_properties.resource_parent security_center_properties.resource_parent_display_name security_center_properties.resource_project security_center_properties.resource_project_display_name security_center_properties.resource_type

string order_by = 3;

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

clearPageSize()

public ListAssetsRequest.Builder clearPageSize()

The maximum number of results to return in a single response. Default is 10, minimum is 1, maximum is 1000.

int32 page_size = 9;

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

clearPageToken()

public ListAssetsRequest.Builder clearPageToken()

The value returned by the last ListAssetsResponse; indicates that this is a continuation of a prior ListAssets call, and that the system should return the next page of data.

string page_token = 8;

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

clearParent()

public ListAssetsRequest.Builder clearParent()

Required. The name of the parent resource that contains the assets. The value that you can specify on parent depends on the method in which you specify parent. You can specify one of the following values: "organizations/[organization_id]", "folders/[folder_id]", or "projects/[project_id]".

string parent = 1 [(.google.api.field_behavior) = REQUIRED, (.google.api.resource_reference) = { ... }

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

clearReadTime()

public ListAssetsRequest.Builder clearReadTime()

Time used as a reference point when filtering assets. The filter is limited to assets existing at the supplied time and their values are those at that specific time. Absence of this field will default to the API's version of NOW.

.google.protobuf.Timestamp read_time = 4;

Returns
TypeDescription
ListAssetsRequest.Builder

clone()

public ListAssetsRequest.Builder clone()
Returns
TypeDescription
ListAssetsRequest.Builder
Overrides

getCompareDuration()

public Duration getCompareDuration()

When compare_duration is set, the ListAssetsResult's "state_change" attribute is updated to indicate whether the asset was added, removed, or remained present during the compare_duration period of time that precedes the read_time. This is the time between (read_time - compare_duration) and read_time.

The state_change value is derived based on the presence of the asset at the two points in time. Intermediate state changes between the two times don't affect the result. For example, the results aren't affected if the asset is removed and re-created again.

Possible "state_change" values when compare_duration is specified:

  • "ADDED": indicates that the asset was not present at the start of compare_duration, but present at read_time.
  • "REMOVED": indicates that the asset was present at the start of compare_duration, but not present at read_time.
  • "ACTIVE": indicates that the asset was present at both the start and the end of the time period defined by compare_duration and read_time.

    If compare_duration is not specified, then the only possible state_change is "UNUSED", which will be the state_change set for all assets present at read_time.

.google.protobuf.Duration compare_duration = 5;

Returns
TypeDescription
Duration

The compareDuration.

getCompareDurationBuilder()

public Duration.Builder getCompareDurationBuilder()

When compare_duration is set, the ListAssetsResult's "state_change" attribute is updated to indicate whether the asset was added, removed, or remained present during the compare_duration period of time that precedes the read_time. This is the time between (read_time - compare_duration) and read_time.

The state_change value is derived based on the presence of the asset at the two points in time. Intermediate state changes between the two times don't affect the result. For example, the results aren't affected if the asset is removed and re-created again.

Possible "state_change" values when compare_duration is specified:

  • "ADDED": indicates that the asset was not present at the start of compare_duration, but present at read_time.
  • "REMOVED": indicates that the asset was present at the start of compare_duration, but not present at read_time.
  • "ACTIVE": indicates that the asset was present at both the start and the end of the time period defined by compare_duration and read_time.

    If compare_duration is not specified, then the only possible state_change is "UNUSED", which will be the state_change set for all assets present at read_time.

.google.protobuf.Duration compare_duration = 5;

Returns
TypeDescription
Builder

getCompareDurationOrBuilder()

public DurationOrBuilder getCompareDurationOrBuilder()

When compare_duration is set, the ListAssetsResult's "state_change" attribute is updated to indicate whether the asset was added, removed, or remained present during the compare_duration period of time that precedes the read_time. This is the time between (read_time - compare_duration) and read_time.

The state_change value is derived based on the presence of the asset at the two points in time. Intermediate state changes between the two times don't affect the result. For example, the results aren't affected if the asset is removed and re-created again.

Possible "state_change" values when compare_duration is specified:

  • "ADDED": indicates that the asset was not present at the start of compare_duration, but present at read_time.
  • "REMOVED": indicates that the asset was present at the start of compare_duration, but not present at read_time.
  • "ACTIVE": indicates that the asset was present at both the start and the end of the time period defined by compare_duration and read_time.

    If compare_duration is not specified, then the only possible state_change is "UNUSED", which will be the state_change set for all assets present at read_time.

.google.protobuf.Duration compare_duration = 5;

Returns
TypeDescription
DurationOrBuilder

getDefaultInstanceForType()

public ListAssetsRequest getDefaultInstanceForType()
Returns
TypeDescription
ListAssetsRequest

getDescriptorForType()

public Descriptors.Descriptor getDescriptorForType()
Returns
TypeDescription
Descriptor
Overrides

getFieldMask()

public FieldMask getFieldMask()

A field mask to specify the ListAssetsResult fields to be listed in the response. An empty field mask will list all fields.

.google.protobuf.FieldMask field_mask = 7;

Returns
TypeDescription
FieldMask

The fieldMask.

getFieldMaskBuilder()

public FieldMask.Builder getFieldMaskBuilder()

A field mask to specify the ListAssetsResult fields to be listed in the response. An empty field mask will list all fields.

.google.protobuf.FieldMask field_mask = 7;

Returns
TypeDescription
Builder

getFieldMaskOrBuilder()

public FieldMaskOrBuilder getFieldMaskOrBuilder()

A field mask to specify the ListAssetsResult fields to be listed in the response. An empty field mask will list all fields.

.google.protobuf.FieldMask field_mask = 7;

Returns
TypeDescription
FieldMaskOrBuilder

getFilter()

public String getFilter()

Expression that defines the filter to apply across assets. The expression is a list of zero or more restrictions combined via logical operators AND and OR. Parentheses are supported, and OR has higher precedence than AND.

Restrictions have the form <field> <operator> <value> and may have a - character in front of them to indicate negation. The fields map to those defined in the Asset resource. Examples include:

  • name
  • security_center_properties.resource_name
  • resource_properties.a_property
  • security_marks.marks.marka

    The supported operators are:

  • = for all value types.

  • >, <, >=, <= for integer values.
  • :, meaning substring matching, for strings.

    The supported value types are:

  • string literals in quotes.

  • integer literals without quotes.
  • boolean literals true and false without quotes.

    The following are the allowed field and operator combinations:

  • name: =

  • update_time: =, >, <, >=, <=

    Usage: This should be milliseconds since epoch or an RFC3339 string. Examples: update_time = "2019-06-10T16:07:18-07:00" update_time = 1560208038000

  • create_time: =, >, <, >=, <=

    Usage: This should be milliseconds since epoch or an RFC3339 string. Examples: create_time = "2019-06-10T16:07:18-07:00" create_time = 1560208038000

  • iam_policy.policy_blob: =, :

  • resource_properties: =, :, >, <, >=, <=
  • security_marks.marks: =, :
  • security_center_properties.resource_name: =, :
  • security_center_properties.resource_display_name: =, :
  • security_center_properties.resource_type: =, :
  • security_center_properties.resource_parent: =, :
  • security_center_properties.resource_parent_display_name: =, :
  • security_center_properties.resource_project: =, :
  • security_center_properties.resource_project_display_name: =, :
  • security_center_properties.resource_owners: =, :

    For example, resource_properties.size = 100 is a valid filter string.

    Use a partial match on the empty string to filter based on a property existing: resource_properties.my_property : ""

    Use a negated partial match on the empty string to filter based on a property not existing: -resource_properties.my_property : ""

string filter = 2;

Returns
TypeDescription
String

The filter.

getFilterBytes()

public ByteString getFilterBytes()

Expression that defines the filter to apply across assets. The expression is a list of zero or more restrictions combined via logical operators AND and OR. Parentheses are supported, and OR has higher precedence than AND.

Restrictions have the form <field> <operator> <value> and may have a - character in front of them to indicate negation. The fields map to those defined in the Asset resource. Examples include:

  • name
  • security_center_properties.resource_name
  • resource_properties.a_property
  • security_marks.marks.marka

    The supported operators are:

  • = for all value types.

  • >, <, >=, <= for integer values.
  • :, meaning substring matching, for strings.

    The supported value types are:

  • string literals in quotes.

  • integer literals without quotes.
  • boolean literals true and false without quotes.

    The following are the allowed field and operator combinations:

  • name: =

  • update_time: =, >, <, >=, <=

    Usage: This should be milliseconds since epoch or an RFC3339 string. Examples: update_time = "2019-06-10T16:07:18-07:00" update_time = 1560208038000

  • create_time: =, >, <, >=, <=

    Usage: This should be milliseconds since epoch or an RFC3339 string. Examples: create_time = "2019-06-10T16:07:18-07:00" create_time = 1560208038000

  • iam_policy.policy_blob: =, :

  • resource_properties: =, :, >, <, >=, <=
  • security_marks.marks: =, :
  • security_center_properties.resource_name: =, :
  • security_center_properties.resource_display_name: =, :
  • security_center_properties.resource_type: =, :
  • security_center_properties.resource_parent: =, :
  • security_center_properties.resource_parent_display_name: =, :
  • security_center_properties.resource_project: =, :
  • security_center_properties.resource_project_display_name: =, :
  • security_center_properties.resource_owners: =, :

    For example, resource_properties.size = 100 is a valid filter string.

    Use a partial match on the empty string to filter based on a property existing: resource_properties.my_property : ""

    Use a negated partial match on the empty string to filter based on a property not existing: -resource_properties.my_property : ""

string filter = 2;

Returns
TypeDescription
ByteString

The bytes for filter.

getOrderBy()

public String getOrderBy()

Expression that defines what fields and order to use for sorting. The string value should follow SQL syntax: comma separated list of fields. For example: "name,resource_properties.a_property". The default sorting order is ascending. To specify descending order for a field, a suffix " desc" should be appended to the field name. For example: "name desc,resource_properties.a_property". Redundant space characters in the syntax are insignificant. "name desc,resource_properties.a_property" and " name desc , resource_properties.a_property " are equivalent.

The following fields are supported: name update_time resource_properties security_marks.marks security_center_properties.resource_name security_center_properties.resource_display_name security_center_properties.resource_parent security_center_properties.resource_parent_display_name security_center_properties.resource_project security_center_properties.resource_project_display_name security_center_properties.resource_type

string order_by = 3;

Returns
TypeDescription
String

The orderBy.

getOrderByBytes()

public ByteString getOrderByBytes()

Expression that defines what fields and order to use for sorting. The string value should follow SQL syntax: comma separated list of fields. For example: "name,resource_properties.a_property". The default sorting order is ascending. To specify descending order for a field, a suffix " desc" should be appended to the field name. For example: "name desc,resource_properties.a_property". Redundant space characters in the syntax are insignificant. "name desc,resource_properties.a_property" and " name desc , resource_properties.a_property " are equivalent.

The following fields are supported: name update_time resource_properties security_marks.marks security_center_properties.resource_name security_center_properties.resource_display_name security_center_properties.resource_parent security_center_properties.resource_parent_display_name security_center_properties.resource_project security_center_properties.resource_project_display_name security_center_properties.resource_type

string order_by = 3;

Returns
TypeDescription
ByteString

The bytes for orderBy.

getPageSize()

public int getPageSize()

The maximum number of results to return in a single response. Default is 10, minimum is 1, maximum is 1000.

int32 page_size = 9;

Returns
TypeDescription
int

The pageSize.

getPageToken()

public String getPageToken()

The value returned by the last ListAssetsResponse; indicates that this is a continuation of a prior ListAssets call, and that the system should return the next page of data.

string page_token = 8;

Returns
TypeDescription
String

The pageToken.

getPageTokenBytes()

public ByteString getPageTokenBytes()

The value returned by the last ListAssetsResponse; indicates that this is a continuation of a prior ListAssets call, and that the system should return the next page of data.

string page_token = 8;

Returns
TypeDescription
ByteString

The bytes for pageToken.

getParent()

public String getParent()

Required. The name of the parent resource that contains the assets. The value that you can specify on parent depends on the method in which you specify parent. You can specify one of the following values: "organizations/[organization_id]", "folders/[folder_id]", or "projects/[project_id]".

string parent = 1 [(.google.api.field_behavior) = REQUIRED, (.google.api.resource_reference) = { ... }

Returns
TypeDescription
String

The parent.

getParentBytes()

public ByteString getParentBytes()

Required. The name of the parent resource that contains the assets. The value that you can specify on parent depends on the method in which you specify parent. You can specify one of the following values: "organizations/[organization_id]", "folders/[folder_id]", or "projects/[project_id]".

string parent = 1 [(.google.api.field_behavior) = REQUIRED, (.google.api.resource_reference) = { ... }

Returns
TypeDescription
ByteString

The bytes for parent.

getReadTime()

public Timestamp getReadTime()

Time used as a reference point when filtering assets. The filter is limited to assets existing at the supplied time and their values are those at that specific time. Absence of this field will default to the API's version of NOW.

.google.protobuf.Timestamp read_time = 4;

Returns
TypeDescription
Timestamp

The readTime.

getReadTimeBuilder()

public Timestamp.Builder getReadTimeBuilder()

Time used as a reference point when filtering assets. The filter is limited to assets existing at the supplied time and their values are those at that specific time. Absence of this field will default to the API's version of NOW.

.google.protobuf.Timestamp read_time = 4;

Returns
TypeDescription
Builder

getReadTimeOrBuilder()

public TimestampOrBuilder getReadTimeOrBuilder()

Time used as a reference point when filtering assets. The filter is limited to assets existing at the supplied time and their values are those at that specific time. Absence of this field will default to the API's version of NOW.

.google.protobuf.Timestamp read_time = 4;

Returns
TypeDescription
TimestampOrBuilder

hasCompareDuration()

public boolean hasCompareDuration()

When compare_duration is set, the ListAssetsResult's "state_change" attribute is updated to indicate whether the asset was added, removed, or remained present during the compare_duration period of time that precedes the read_time. This is the time between (read_time - compare_duration) and read_time.

The state_change value is derived based on the presence of the asset at the two points in time. Intermediate state changes between the two times don't affect the result. For example, the results aren't affected if the asset is removed and re-created again.

Possible "state_change" values when compare_duration is specified:

  • "ADDED": indicates that the asset was not present at the start of compare_duration, but present at read_time.
  • "REMOVED": indicates that the asset was present at the start of compare_duration, but not present at read_time.
  • "ACTIVE": indicates that the asset was present at both the start and the end of the time period defined by compare_duration and read_time.

    If compare_duration is not specified, then the only possible state_change is "UNUSED", which will be the state_change set for all assets present at read_time.

.google.protobuf.Duration compare_duration = 5;

Returns
TypeDescription
boolean

Whether the compareDuration field is set.

hasFieldMask()

public boolean hasFieldMask()

A field mask to specify the ListAssetsResult fields to be listed in the response. An empty field mask will list all fields.

.google.protobuf.FieldMask field_mask = 7;

Returns
TypeDescription
boolean

Whether the fieldMask field is set.

hasReadTime()

public boolean hasReadTime()

Time used as a reference point when filtering assets. The filter is limited to assets existing at the supplied time and their values are those at that specific time. Absence of this field will default to the API's version of NOW.

.google.protobuf.Timestamp read_time = 4;

Returns
TypeDescription
boolean

Whether the readTime field is set.

internalGetFieldAccessorTable()

protected GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
Returns
TypeDescription
FieldAccessorTable
Overrides

isInitialized()

public final boolean isInitialized()
Returns
TypeDescription
boolean
Overrides

mergeCompareDuration(Duration value)

public ListAssetsRequest.Builder mergeCompareDuration(Duration value)

When compare_duration is set, the ListAssetsResult's "state_change" attribute is updated to indicate whether the asset was added, removed, or remained present during the compare_duration period of time that precedes the read_time. This is the time between (read_time - compare_duration) and read_time.

The state_change value is derived based on the presence of the asset at the two points in time. Intermediate state changes between the two times don't affect the result. For example, the results aren't affected if the asset is removed and re-created again.

Possible "state_change" values when compare_duration is specified:

  • "ADDED": indicates that the asset was not present at the start of compare_duration, but present at read_time.
  • "REMOVED": indicates that the asset was present at the start of compare_duration, but not present at read_time.
  • "ACTIVE": indicates that the asset was present at both the start and the end of the time period defined by compare_duration and read_time.

    If compare_duration is not specified, then the only possible state_change is "UNUSED", which will be the state_change set for all assets present at read_time.

.google.protobuf.Duration compare_duration = 5;

Parameter
NameDescription
valueDuration
Returns
TypeDescription
ListAssetsRequest.Builder

mergeFieldMask(FieldMask value)

public ListAssetsRequest.Builder mergeFieldMask(FieldMask value)

A field mask to specify the ListAssetsResult fields to be listed in the response. An empty field mask will list all fields.

.google.protobuf.FieldMask field_mask = 7;

Parameter
NameDescription
valueFieldMask
Returns
TypeDescription
ListAssetsRequest.Builder

mergeFrom(ListAssetsRequest other)

public ListAssetsRequest.Builder mergeFrom(ListAssetsRequest other)
Parameter
NameDescription
otherListAssetsRequest
Returns
TypeDescription
ListAssetsRequest.Builder

mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

public ListAssetsRequest.Builder mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)
Parameters
NameDescription
inputCodedInputStream
extensionRegistryExtensionRegistryLite
Returns
TypeDescription
ListAssetsRequest.Builder
Overrides
Exceptions
TypeDescription
IOException

mergeFrom(Message other)

public ListAssetsRequest.Builder mergeFrom(Message other)
Parameter
NameDescription
otherMessage
Returns
TypeDescription
ListAssetsRequest.Builder
Overrides

mergeReadTime(Timestamp value)

public ListAssetsRequest.Builder mergeReadTime(Timestamp value)

Time used as a reference point when filtering assets. The filter is limited to assets existing at the supplied time and their values are those at that specific time. Absence of this field will default to the API's version of NOW.

.google.protobuf.Timestamp read_time = 4;

Parameter
NameDescription
valueTimestamp
Returns
TypeDescription
ListAssetsRequest.Builder

mergeUnknownFields(UnknownFieldSet unknownFields)

public final ListAssetsRequest.Builder mergeUnknownFields(UnknownFieldSet unknownFields)
Parameter
NameDescription
unknownFieldsUnknownFieldSet
Returns
TypeDescription
ListAssetsRequest.Builder
Overrides

setCompareDuration(Duration value)

public ListAssetsRequest.Builder setCompareDuration(Duration value)

When compare_duration is set, the ListAssetsResult's "state_change" attribute is updated to indicate whether the asset was added, removed, or remained present during the compare_duration period of time that precedes the read_time. This is the time between (read_time - compare_duration) and read_time.

The state_change value is derived based on the presence of the asset at the two points in time. Intermediate state changes between the two times don't affect the result. For example, the results aren't affected if the asset is removed and re-created again.

Possible "state_change" values when compare_duration is specified:

  • "ADDED": indicates that the asset was not present at the start of compare_duration, but present at read_time.
  • "REMOVED": indicates that the asset was present at the start of compare_duration, but not present at read_time.
  • "ACTIVE": indicates that the asset was present at both the start and the end of the time period defined by compare_duration and read_time.

    If compare_duration is not specified, then the only possible state_change is "UNUSED", which will be the state_change set for all assets present at read_time.

.google.protobuf.Duration compare_duration = 5;

Parameter
NameDescription
valueDuration
Returns
TypeDescription
ListAssetsRequest.Builder

setCompareDuration(Duration.Builder builderForValue)

public ListAssetsRequest.Builder setCompareDuration(Duration.Builder builderForValue)

When compare_duration is set, the ListAssetsResult's "state_change" attribute is updated to indicate whether the asset was added, removed, or remained present during the compare_duration period of time that precedes the read_time. This is the time between (read_time - compare_duration) and read_time.

The state_change value is derived based on the presence of the asset at the two points in time. Intermediate state changes between the two times don't affect the result. For example, the results aren't affected if the asset is removed and re-created again.

Possible "state_change" values when compare_duration is specified:

  • "ADDED": indicates that the asset was not present at the start of compare_duration, but present at read_time.
  • "REMOVED": indicates that the asset was present at the start of compare_duration, but not present at read_time.
  • "ACTIVE": indicates that the asset was present at both the start and the end of the time period defined by compare_duration and read_time.

    If compare_duration is not specified, then the only possible state_change is "UNUSED", which will be the state_change set for all assets present at read_time.

.google.protobuf.Duration compare_duration = 5;

Parameter
NameDescription
builderForValueBuilder
Returns
TypeDescription
ListAssetsRequest.Builder

setField(Descriptors.FieldDescriptor field, Object value)

public ListAssetsRequest.Builder setField(Descriptors.FieldDescriptor field, Object value)
Parameters
NameDescription
fieldFieldDescriptor
valueObject
Returns
TypeDescription
ListAssetsRequest.Builder
Overrides

setFieldMask(FieldMask value)

public ListAssetsRequest.Builder setFieldMask(FieldMask value)

A field mask to specify the ListAssetsResult fields to be listed in the response. An empty field mask will list all fields.

.google.protobuf.FieldMask field_mask = 7;

Parameter
NameDescription
valueFieldMask
Returns
TypeDescription
ListAssetsRequest.Builder

setFieldMask(FieldMask.Builder builderForValue)

public ListAssetsRequest.Builder setFieldMask(FieldMask.Builder builderForValue)

A field mask to specify the ListAssetsResult fields to be listed in the response. An empty field mask will list all fields.

.google.protobuf.FieldMask field_mask = 7;

Parameter
NameDescription
builderForValueBuilder
Returns
TypeDescription
ListAssetsRequest.Builder

setFilter(String value)

public ListAssetsRequest.Builder setFilter(String value)

Expression that defines the filter to apply across assets. The expression is a list of zero or more restrictions combined via logical operators AND and OR. Parentheses are supported, and OR has higher precedence than AND.

Restrictions have the form <field> <operator> <value> and may have a - character in front of them to indicate negation. The fields map to those defined in the Asset resource. Examples include:

  • name
  • security_center_properties.resource_name
  • resource_properties.a_property
  • security_marks.marks.marka

    The supported operators are:

  • = for all value types.

  • >, <, >=, <= for integer values.
  • :, meaning substring matching, for strings.

    The supported value types are:

  • string literals in quotes.

  • integer literals without quotes.
  • boolean literals true and false without quotes.

    The following are the allowed field and operator combinations:

  • name: =

  • update_time: =, >, <, >=, <=

    Usage: This should be milliseconds since epoch or an RFC3339 string. Examples: update_time = "2019-06-10T16:07:18-07:00" update_time = 1560208038000

  • create_time: =, >, <, >=, <=

    Usage: This should be milliseconds since epoch or an RFC3339 string. Examples: create_time = "2019-06-10T16:07:18-07:00" create_time = 1560208038000

  • iam_policy.policy_blob: =, :

  • resource_properties: =, :, >, <, >=, <=
  • security_marks.marks: =, :
  • security_center_properties.resource_name: =, :
  • security_center_properties.resource_display_name: =, :
  • security_center_properties.resource_type: =, :
  • security_center_properties.resource_parent: =, :
  • security_center_properties.resource_parent_display_name: =, :
  • security_center_properties.resource_project: =, :
  • security_center_properties.resource_project_display_name: =, :
  • security_center_properties.resource_owners: =, :

    For example, resource_properties.size = 100 is a valid filter string.

    Use a partial match on the empty string to filter based on a property existing: resource_properties.my_property : ""

    Use a negated partial match on the empty string to filter based on a property not existing: -resource_properties.my_property : ""

string filter = 2;

Parameter
NameDescription
valueString

The filter to set.

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

setFilterBytes(ByteString value)

public ListAssetsRequest.Builder setFilterBytes(ByteString value)

Expression that defines the filter to apply across assets. The expression is a list of zero or more restrictions combined via logical operators AND and OR. Parentheses are supported, and OR has higher precedence than AND.

Restrictions have the form <field> <operator> <value> and may have a - character in front of them to indicate negation. The fields map to those defined in the Asset resource. Examples include:

  • name
  • security_center_properties.resource_name
  • resource_properties.a_property
  • security_marks.marks.marka

    The supported operators are:

  • = for all value types.

  • >, <, >=, <= for integer values.
  • :, meaning substring matching, for strings.

    The supported value types are:

  • string literals in quotes.

  • integer literals without quotes.
  • boolean literals true and false without quotes.

    The following are the allowed field and operator combinations:

  • name: =

  • update_time: =, >, <, >=, <=

    Usage: This should be milliseconds since epoch or an RFC3339 string. Examples: update_time = "2019-06-10T16:07:18-07:00" update_time = 1560208038000

  • create_time: =, >, <, >=, <=

    Usage: This should be milliseconds since epoch or an RFC3339 string. Examples: create_time = "2019-06-10T16:07:18-07:00" create_time = 1560208038000

  • iam_policy.policy_blob: =, :

  • resource_properties: =, :, >, <, >=, <=
  • security_marks.marks: =, :
  • security_center_properties.resource_name: =, :
  • security_center_properties.resource_display_name: =, :
  • security_center_properties.resource_type: =, :
  • security_center_properties.resource_parent: =, :
  • security_center_properties.resource_parent_display_name: =, :
  • security_center_properties.resource_project: =, :
  • security_center_properties.resource_project_display_name: =, :
  • security_center_properties.resource_owners: =, :

    For example, resource_properties.size = 100 is a valid filter string.

    Use a partial match on the empty string to filter based on a property existing: resource_properties.my_property : ""

    Use a negated partial match on the empty string to filter based on a property not existing: -resource_properties.my_property : ""

string filter = 2;

Parameter
NameDescription
valueByteString

The bytes for filter to set.

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

setOrderBy(String value)

public ListAssetsRequest.Builder setOrderBy(String value)

Expression that defines what fields and order to use for sorting. The string value should follow SQL syntax: comma separated list of fields. For example: "name,resource_properties.a_property". The default sorting order is ascending. To specify descending order for a field, a suffix " desc" should be appended to the field name. For example: "name desc,resource_properties.a_property". Redundant space characters in the syntax are insignificant. "name desc,resource_properties.a_property" and " name desc , resource_properties.a_property " are equivalent.

The following fields are supported: name update_time resource_properties security_marks.marks security_center_properties.resource_name security_center_properties.resource_display_name security_center_properties.resource_parent security_center_properties.resource_parent_display_name security_center_properties.resource_project security_center_properties.resource_project_display_name security_center_properties.resource_type

string order_by = 3;

Parameter
NameDescription
valueString

The orderBy to set.

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

setOrderByBytes(ByteString value)

public ListAssetsRequest.Builder setOrderByBytes(ByteString value)

Expression that defines what fields and order to use for sorting. The string value should follow SQL syntax: comma separated list of fields. For example: "name,resource_properties.a_property". The default sorting order is ascending. To specify descending order for a field, a suffix " desc" should be appended to the field name. For example: "name desc,resource_properties.a_property". Redundant space characters in the syntax are insignificant. "name desc,resource_properties.a_property" and " name desc , resource_properties.a_property " are equivalent.

The following fields are supported: name update_time resource_properties security_marks.marks security_center_properties.resource_name security_center_properties.resource_display_name security_center_properties.resource_parent security_center_properties.resource_parent_display_name security_center_properties.resource_project security_center_properties.resource_project_display_name security_center_properties.resource_type

string order_by = 3;

Parameter
NameDescription
valueByteString

The bytes for orderBy to set.

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

setPageSize(int value)

public ListAssetsRequest.Builder setPageSize(int value)

The maximum number of results to return in a single response. Default is 10, minimum is 1, maximum is 1000.

int32 page_size = 9;

Parameter
NameDescription
valueint

The pageSize to set.

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

setPageToken(String value)

public ListAssetsRequest.Builder setPageToken(String value)

The value returned by the last ListAssetsResponse; indicates that this is a continuation of a prior ListAssets call, and that the system should return the next page of data.

string page_token = 8;

Parameter
NameDescription
valueString

The pageToken to set.

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

setPageTokenBytes(ByteString value)

public ListAssetsRequest.Builder setPageTokenBytes(ByteString value)

The value returned by the last ListAssetsResponse; indicates that this is a continuation of a prior ListAssets call, and that the system should return the next page of data.

string page_token = 8;

Parameter
NameDescription
valueByteString

The bytes for pageToken to set.

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

setParent(String value)

public ListAssetsRequest.Builder setParent(String value)

Required. The name of the parent resource that contains the assets. The value that you can specify on parent depends on the method in which you specify parent. You can specify one of the following values: "organizations/[organization_id]", "folders/[folder_id]", or "projects/[project_id]".

string parent = 1 [(.google.api.field_behavior) = REQUIRED, (.google.api.resource_reference) = { ... }

Parameter
NameDescription
valueString

The parent to set.

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

setParentBytes(ByteString value)

public ListAssetsRequest.Builder setParentBytes(ByteString value)

Required. The name of the parent resource that contains the assets. The value that you can specify on parent depends on the method in which you specify parent. You can specify one of the following values: "organizations/[organization_id]", "folders/[folder_id]", or "projects/[project_id]".

string parent = 1 [(.google.api.field_behavior) = REQUIRED, (.google.api.resource_reference) = { ... }

Parameter
NameDescription
valueByteString

The bytes for parent to set.

Returns
TypeDescription
ListAssetsRequest.Builder

This builder for chaining.

setReadTime(Timestamp value)

public ListAssetsRequest.Builder setReadTime(Timestamp value)

Time used as a reference point when filtering assets. The filter is limited to assets existing at the supplied time and their values are those at that specific time. Absence of this field will default to the API's version of NOW.

.google.protobuf.Timestamp read_time = 4;

Parameter
NameDescription
valueTimestamp
Returns
TypeDescription
ListAssetsRequest.Builder

setReadTime(Timestamp.Builder builderForValue)

public ListAssetsRequest.Builder setReadTime(Timestamp.Builder builderForValue)

Time used as a reference point when filtering assets. The filter is limited to assets existing at the supplied time and their values are those at that specific time. Absence of this field will default to the API's version of NOW.

.google.protobuf.Timestamp read_time = 4;

Parameter
NameDescription
builderForValueBuilder
Returns
TypeDescription
ListAssetsRequest.Builder

setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

public ListAssetsRequest.Builder setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)
Parameters
NameDescription
fieldFieldDescriptor
indexint
valueObject
Returns
TypeDescription
ListAssetsRequest.Builder
Overrides

setUnknownFields(UnknownFieldSet unknownFields)

public final ListAssetsRequest.Builder setUnknownFields(UnknownFieldSet unknownFields)
Parameter
NameDescription
unknownFieldsUnknownFieldSet
Returns
TypeDescription
ListAssetsRequest.Builder
Overrides