public sealed class Firewall : IMessage<Firewall>, IEquatable<Firewall>, IDeepCloneable<Firewall>, IBufferMessage, IMessage
Reference documentation and code samples for the Compute Engine v1 API class Firewall.
Represents a Firewall Rule resource. Firewall rules allow or deny ingress traffic to, and egress traffic from your instances. For more information, read Firewall rules.
Namespace
Google.Cloud.Compute.V1Assembly
Google.Cloud.Compute.V1.dll
Constructors
Firewall()
public Firewall()
Firewall(Firewall)
public Firewall(Firewall other)
Parameter | |
---|---|
Name | Description |
other | Firewall |
Properties
Allowed
public RepeatedField<Allowed> Allowed { get; }
The list of ALLOW rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a permitted connection.
Property Value | |
---|---|
Type | Description |
RepeatedFieldAllowed |
CreationTimestamp
public string CreationTimestamp { get; set; }
[Output Only] Creation timestamp in RFC3339 text format.
Property Value | |
---|---|
Type | Description |
string |
Denied
public RepeatedField<Denied> Denied { get; }
The list of DENY rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a denied connection.
Property Value | |
---|---|
Type | Description |
RepeatedFieldDenied |
Description
public string Description { get; set; }
An optional description of this resource. Provide this field when you create the resource.
Property Value | |
---|---|
Type | Description |
string |
DestinationRanges
public RepeatedField<string> DestinationRanges { get; }
If destination ranges are specified, the firewall rule applies only to traffic that has destination IP address in these ranges. These ranges must be expressed in CIDR format. Both IPv4 and IPv6 are supported.
Property Value | |
---|---|
Type | Description |
RepeatedFieldstring |
Direction
public string Direction { get; set; }
Direction of traffic to which this firewall applies, either INGRESS
or EGRESS
. The default is INGRESS
. For EGRESS
traffic, you cannot specify the sourceTags fields.
Check the Direction enum for the list of possible values.
Property Value | |
---|---|
Type | Description |
string |
Disabled
public bool Disabled { get; set; }
Denotes whether the firewall rule is disabled. When set to true, the firewall rule is not enforced and the network behaves as if it did not exist. If this is unspecified, the firewall rule will be enabled.
Property Value | |
---|---|
Type | Description |
bool |
HasCreationTimestamp
public bool HasCreationTimestamp { get; }
Gets whether the "creation_timestamp" field is set
Property Value | |
---|---|
Type | Description |
bool |
HasDescription
public bool HasDescription { get; }
Gets whether the "description" field is set
Property Value | |
---|---|
Type | Description |
bool |
HasDirection
public bool HasDirection { get; }
Gets whether the "direction" field is set
Property Value | |
---|---|
Type | Description |
bool |
HasDisabled
public bool HasDisabled { get; }
Gets whether the "disabled" field is set
Property Value | |
---|---|
Type | Description |
bool |
HasId
public bool HasId { get; }
Gets whether the "id" field is set
Property Value | |
---|---|
Type | Description |
bool |
HasKind
public bool HasKind { get; }
Gets whether the "kind" field is set
Property Value | |
---|---|
Type | Description |
bool |
HasName
public bool HasName { get; }
Gets whether the "name" field is set
Property Value | |
---|---|
Type | Description |
bool |
HasNetwork
public bool HasNetwork { get; }
Gets whether the "network" field is set
Property Value | |
---|---|
Type | Description |
bool |
HasPriority
public bool HasPriority { get; }
Gets whether the "priority" field is set
Property Value | |
---|---|
Type | Description |
bool |
HasSelfLink
public bool HasSelfLink { get; }
Gets whether the "self_link" field is set
Property Value | |
---|---|
Type | Description |
bool |
Id
public ulong Id { get; set; }
[Output Only] The unique identifier for the resource. This identifier is defined by the server.
Property Value | |
---|---|
Type | Description |
ulong |
Kind
public string Kind { get; set; }
[Output Only] Type of the resource. Always compute#firewall for firewall rules.
Property Value | |
---|---|
Type | Description |
string |
LogConfig
public FirewallLogConfig LogConfig { get; set; }
This field denotes the logging options for a particular firewall rule. If logging is enabled, logs will be exported to Cloud Logging.
Property Value | |
---|---|
Type | Description |
FirewallLogConfig |
Name
public string Name { get; set; }
Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])?
. The first character must be a lowercase letter, and all following characters (except for the last character) must be a dash, lowercase letter, or digit. The last character must be a lowercase letter or digit.
Property Value | |
---|---|
Type | Description |
string |
Network
public string Network { get; set; }
URL of the network resource for this firewall rule. If not specified when creating a firewall rule, the default network is used: global/networks/default If you choose to specify this field, you can specify the network as a full or partial URL. For example, the following are all valid URLs: - https://www.googleapis.com/compute/v1/projects/myproject/global/networks/my-network - projects/myproject/global/networks/my-network - global/networks/default
Property Value | |
---|---|
Type | Description |
string |
Priority
public int Priority { get; set; }
Priority for this rule. This is an integer between 0
and 65535
, both inclusive. The default value is 1000
. Relative priorities determine which rule takes effect if multiple rules apply. Lower values indicate higher priority. For example, a rule with priority 0
has higher precedence than a rule with priority 1
. DENY rules take precedence over ALLOW rules if they have equal priority. Note that VPC networks have implied rules with a priority of 65535
. To avoid conflicts with the implied rules, use a priority number less than 65535
.
Property Value | |
---|---|
Type | Description |
int |
SelfLink
public string SelfLink { get; set; }
[Output Only] Server-defined URL for the resource.
Property Value | |
---|---|
Type | Description |
string |
SourceRanges
public RepeatedField<string> SourceRanges { get; }
If source ranges are specified, the firewall rule applies only to traffic that has a source IP address in these ranges. These ranges must be expressed in CIDR format. One or both of sourceRanges and sourceTags may be set. If both fields are set, the rule applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the rule to apply. Both IPv4 and IPv6 are supported.
Property Value | |
---|---|
Type | Description |
RepeatedFieldstring |
SourceServiceAccounts
public RepeatedField<string> SourceServiceAccounts { get; }
If source service accounts are specified, the firewall rules apply only to traffic originating from an instance with a service account in this list. Source service accounts cannot be used to control traffic to an instance's external IP address because service accounts are associated with an instance, not an IP address. sourceRanges can be set at the same time as sourceServiceAccounts. If both are set, the firewall applies to traffic that has a source IP address within the sourceRanges OR a source IP that belongs to an instance with service account listed in sourceServiceAccount. The connection does not need to match both fields for the firewall to apply. sourceServiceAccounts cannot be used at the same time as sourceTags or targetTags.
Property Value | |
---|---|
Type | Description |
RepeatedFieldstring |
SourceTags
public RepeatedField<string> SourceTags { get; }
If source tags are specified, the firewall rule applies only to traffic with source IPs that match the primary network interfaces of VM instances that have the tag and are in the same VPC network. Source tags cannot be used to control traffic to an instance's external IP address, it only applies to traffic between instances in the same virtual network. Because tags are associated with instances, not IP addresses. One or both of sourceRanges and sourceTags may be set. If both fields are set, the firewall applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the firewall to apply.
Property Value | |
---|---|
Type | Description |
RepeatedFieldstring |
TargetServiceAccounts
public RepeatedField<string> TargetServiceAccounts { get; }
A list of service accounts indicating sets of instances located in the network that may make network connections as specified in allowed[]. targetServiceAccounts cannot be used at the same time as targetTags or sourceTags. If neither targetServiceAccounts nor targetTags are specified, the firewall rule applies to all instances on the specified network.
Property Value | |
---|---|
Type | Description |
RepeatedFieldstring |
TargetTags
public RepeatedField<string> TargetTags { get; }
A list of tags that controls which instances the firewall rule applies to. If targetTags are specified, then the firewall rule applies only to instances in the VPC network that have one of those tags. If no targetTags are specified, the firewall rule applies to all instances on the specified network.
Property Value | |
---|---|
Type | Description |
RepeatedFieldstring |