Creating and managing job templates

This page shows you how to create and manage Transcoder API job templates.

By default, the Transcoder API applies a preset template called preset/web-hd to populate a job configuration. You can specify your own custom job templates when creating transcoding jobs. A job configuration represents many of the settings you can customize when creating a job.

Set up your Google Cloud project and authentication

If you have not created a Google Cloud project and credentials, see Before you begin.

Creating job templates

You can specify a wide variety of settings in a job template. For an introduction to some of the terminology and concepts of job configurations, see the Transcoder API overview.

To create a job template, use the projects.locations.jobTemplates.create method. The following example uses a simple configuration to create standard definition and high definition .mp4 output files. For more information on a job configuration, see the JobConfig reference.

Note: Don't specify an input or output URI for a job template. Instead, you populate these values when creating a job.

REST

Before using any of the request data, make the following replacements:

• PROJECT_ID: Your Google Cloud project ID listed in the IAM Settings.
• LOCATION: The location where your job template will be stored. Use one of the supported regions.
  Show locations
  • us-central1
  • us-west1
  • us-west2
  • us-east1
  • us-east4
  • southamerica-east1
  • northamerica-northeast1
  • asia-east1
  • asia-northeast1
  • asia-northeast3
  • asia-south1
  • asia-southeast1
  • australia-southeast1
  • europe-west1
  • europe-west2
  • europe-west4
• TEMPLATE_ID: A user-defined identifier for the new job template to create. This value should be 4-63 characters and valid characters are in the regular expression [a-zA-Z][a-zA-Z0-9_-]*.

To send your request, expand one of these options:

curl (Linux, macOS, or Cloud Shell)

Note: The following command assumes that you have logged in to the gcloud CLI with your user account by running gcloud init or gcloud auth login , or by using Cloud Shell, which automatically logs you into the gcloud CLI . You can check the currently active account by running gcloud auth list.

Save the request body in a file named request.json. Run the following command in the terminal to create or overwrite this file in the current directory:

cat > request.json << 'EOF'
{
  "config": {
    "elementaryStreams": [
      {
        "key": "video-stream0",
        "videoStream": {
          "h264": {
            "heightPixels": 360,
            "widthPixels": 640,
            "bitrateBps": 550000,
            "frameRate": 60
          }
        }
      },
      {
        "key": "video-stream1",
        "videoStream": {
          "h264": {
            "heightPixels": 720,
            "widthPixels": 1280,
            "bitrateBps": 2500000,
            "frameRate": 60
          }
        }
      },
      {
        "key": "audio-stream0",
        "audioStream": {
          "codec": "aac",
          "bitrateBps": 64000
        }
      }
    ],
    "muxStreams": [
      {
        "key": "sd",
        "container": "mp4",
        "elementaryStreams": [
          "video-stream0",
          "audio-stream0"
        ]
      },
      {
        "key": "hd",
        "container": "mp4",
        "elementaryStreams": [
          "video-stream1",
          "audio-stream0"
        ]
      }
    ]
  }
}
EOF

Then execute the following command to send your REST request:

curl -X POST \
     -H "Authorization: Bearer $(gcloud auth print-access-token)" \
     -H "Content-Type: application/json; charset=utf-8" \
     -d @request.json \
     "https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobTemplates?jobTemplateId=TEMPLATE_ID"

PowerShell (Windows)

Note: The following command assumes that you have logged in to the gcloud CLI with your user account by running gcloud init or gcloud auth login . You can check the currently active account by running gcloud auth list.

Save the request body in a file named request.json. Run the following command in the terminal to create or overwrite this file in the current directory:

@'
{
  "config": {
    "elementaryStreams": [
      {
        "key": "video-stream0",
        "videoStream": {
          "h264": {
            "heightPixels": 360,
            "widthPixels": 640,
            "bitrateBps": 550000,
            "frameRate": 60
          }
        }
      },
      {
        "key": "video-stream1",
        "videoStream": {
          "h264": {
            "heightPixels": 720,
            "widthPixels": 1280,
            "bitrateBps": 2500000,
            "frameRate": 60
          }
        }
      },
      {
        "key": "audio-stream0",
        "audioStream": {
          "codec": "aac",
          "bitrateBps": 64000
        }
      }
    ],
    "muxStreams": [
      {
        "key": "sd",
        "container": "mp4",
        "elementaryStreams": [
          "video-stream0",
          "audio-stream0"
        ]
      },
      {
        "key": "hd",
        "container": "mp4",
        "elementaryStreams": [
          "video-stream1",
          "audio-stream0"
        ]
      }
    ]
  }
}
'@  | Out-File -FilePath request.json -Encoding utf8

Then execute the following command to send your REST request:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobTemplates?jobTemplateId=TEMPLATE_ID" | Select-Object -Expand Content

You should receive a JSON response similar to the following:

{
  "name": "projects/PROJECT_NUMBER/locations/LOCATION/jobTemplates/TEMPLATE_ID",
  "config": {
    "inputs": [
      {
        "key": "input0"
      }
    ],
    "editList": [
      {
        "key": "atom0",
        "inputs": [
          "input0"
        ],
        "startTimeOffset": "0s"
      }
    ],
    "elementaryStreams": [
      {
        "videoStream": {
          "h264": {
            "widthPixels": 640,
            "heightPixels": 360,
            "frameRate": 60,
            "bitrateBps": 550000,
            "pixelFormat": "yuv420p",
            "rateControlMode": "vbr",
            "crfLevel": 21,
            "gopDuration": "3s",
            "vbvSizeBits": 550000,
            "vbvFullnessBits": 495000,
            "entropyCoder": "cabac",
            "profile": "high",
            "preset": "veryfast"
          }
        },
        "key": "video-stream0"
      },
      {
        "videoStream": {
          "h264": {
            "widthPixels": 1280,
            "heightPixels": 720,
            "frameRate": 60,
            "bitrateBps": 2500000,
            "pixelFormat": "yuv420p",
            "rateControlMode": "vbr",
            "crfLevel": 21,
            "gopDuration": "3s",
            "vbvSizeBits": 2500000,
            "vbvFullnessBits": 2250000,
            "entropyCoder": "cabac",
            "profile": "high",
            "preset": "veryfast"
          }
        },
        "key": "video-stream1"
      },
      {
        "audioStream": {
          "codec": "aac",
          "bitrateBps": 64000,
          "channelCount": 2,
          "channelLayout": [
            "fl",
            "fr"
          ],
          "sampleRateHertz": 48000
        },
        "key": "audio-stream0"
      }
    ],
    "muxStreams": [
      {
        "key": "sd",
        "fileName": "sd.mp4",
        "container": "mp4",
        "elementaryStreams": [
          "video-stream0",
          "audio-stream0"
        ]
      },
      {
        "key": "hd",
        "fileName": "hd.mp4",
        "container": "mp4",
        "elementaryStreams": [
          "video-stream1",
          "audio-stream0"
        ]
      }
    ],
    "output": {}
  }
}

gcloud

1. Create a request.json file that defines the job template fields. The following is an example job template:

   {
     "config": {
       "elementaryStreams": [
         {
           "key": "video-stream0",
           "videoStream": {
             "h264": {
               "heightPixels": 360,
               "widthPixels": 640,
               "bitrateBps": 550000,
               "frameRate": 60
             }
           }
         },
         {
           "key": "video-stream1",
           "videoStream": {
             "h264": {
               "heightPixels": 720,
               "widthPixels": 1280,
               "bitrateBps": 2500000,
               "frameRate": 60
             }
           }
         },
         {
           "key": "audio-stream0",
           "audioStream": {
             "codec": "aac",
             "bitrateBps": 64000
           }
         }
       ],
       "muxStreams": [
         {
           "key": "sd",
           "container": "mp4",
           "elementaryStreams": [
             "video-stream0",
             "audio-stream0"
           ]
         },
         {
           "key": "hd",
           "container": "mp4",
           "elementaryStreams": [
             "video-stream1",
             "audio-stream0"
           ]
         }
       ]
     }
   }
   

2. Make the following replacements for the gcloud command:
• TEMPLATE_ID: A user-defined identifier for the new job template to create. This value should be 4-63 characters and valid characters are in the regular expression [a-zA-Z][a-zA-Z0-9_-]*.
• LOCATION: The location where your job template will be stored. Use one of the supported regions.
  Show locations
  • us-central1
  • us-west1
  • us-west2
  • us-east1
  • us-east4
  • southamerica-east1
  • northamerica-northeast1
  • asia-east1
  • asia-northeast1
  • asia-northeast3
  • asia-south1
  • asia-southeast1
  • australia-southeast1
  • europe-west1
  • europe-west2
  • europe-west4
3. Run the following command:

   gcloud transcoder templates create TEMPLATE_ID --file="request.json" --location=LOCATION

   You should see a response similar to the following:

   {
     "name": "projects/PROJECT_NUMBER/locations/LOCATION/jobTemplates/TEMPLATE_ID",
     "config": {
       "inputs": [
         {
           "key": "input0"
         }
       ],
       "editList": [
         {
           "key": "atom0",
           "inputs": [
             "input0"
           ],
           "startTimeOffset": "0s"
         }
       ],
       "elementaryStreams": [
         {
           "videoStream": {
             "h264": {
               "widthPixels": 640,
               "heightPixels": 360,
               "frameRate": 60,
               "bitrateBps": 550000,
               "pixelFormat": "yuv420p",
               "rateControlMode": "vbr",
               "crfLevel": 21,
               "gopDuration": "3s",
               "vbvSizeBits": 550000,
               "vbvFullnessBits": 495000,
               "entropyCoder": "cabac",
               "profile": "high",
               "preset": "veryfast"
             }
           },
           "key": "video-stream0"
         },
         {
           "videoStream": {
             "h264": {
               "widthPixels": 1280,
               "heightPixels": 720,
               "frameRate": 60,
               "bitrateBps": 2500000,
               "pixelFormat": "yuv420p",
               "rateControlMode": "vbr",
               "crfLevel": 21,
               "gopDuration": "3s",
               "vbvSizeBits": 2500000,
               "vbvFullnessBits": 2250000,
               "entropyCoder": "cabac",
               "profile": "high",
               "preset": "veryfast"
             }
           },
           "key": "video-stream1"
         },
         {
           "audioStream": {
             "codec": "aac",
             "bitrateBps": 64000,
             "channelCount": 2,
             "channelLayout": [
               "fl",
               "fr"
             ],
             "sampleRateHertz": 48000
           },
           "key": "audio-stream0"
         }
       ],
       "muxStreams": [
         {
           "key": "sd",
           "fileName": "sd.mp4",
           "container": "mp4",
           "elementaryStreams": [
             "video-stream0",
             "audio-stream0"
           ]
         },
         {
           "key": "hd",
           "fileName": "hd.mp4",
           "container": "mp4",
           "elementaryStreams": [
             "video-stream1",
             "audio-stream0"
           ]
         }
       ],
       "output": {}
     }
   }
   

C#

Before trying this sample, follow the C# setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API C# API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

using Google.Api.Gax.ResourceNames;
using Google.Cloud.Video.Transcoder.V1;

public class CreateJobTemplateSample
{
    public JobTemplate CreateJobTemplate(
        string projectId, string location, string templateId)
    {
        // Create the client.
        TranscoderServiceClient client = TranscoderServiceClient.Create();

        // Build the parent location name.
        LocationName parentLocation = new LocationName(projectId, location);

        // Build the job template config.
        VideoStream videoStream0 = new VideoStream
        {
            H264 = new VideoStream.Types.H264CodecSettings
            {
                BitrateBps = 550000,
                FrameRate = 60,
                HeightPixels = 360,
                WidthPixels = 640
            }
        };

        VideoStream videoStream1 = new VideoStream
        {
            H264 = new VideoStream.Types.H264CodecSettings
            {
                BitrateBps = 2500000,
                FrameRate = 60,
                HeightPixels = 720,
                WidthPixels = 1280
            }
        };

        AudioStream audioStream0 = new AudioStream
        {
            Codec = "aac",
            BitrateBps = 64000
        };

        ElementaryStream elementaryStream0 = new ElementaryStream
        {
            Key = "video_stream0",
            VideoStream = videoStream0
        };

        ElementaryStream elementaryStream1 = new ElementaryStream
        {
            Key = "video_stream1",
            VideoStream = videoStream1
        };

        ElementaryStream elementaryStream2 = new ElementaryStream
        {
            Key = "audio_stream0",
            AudioStream = audioStream0
        };

        MuxStream muxStream0 = new MuxStream
        {
            Key = "sd",
            Container = "mp4",
            ElementaryStreams = { "video_stream0", "audio_stream0" }
        };

        MuxStream muxStream1 = new MuxStream
        {
            Key = "hd",
            Container = "mp4",
            ElementaryStreams = { "video_stream1", "audio_stream0" }
        };

        JobConfig jobConfig = new JobConfig
        {
            ElementaryStreams = { elementaryStream0, elementaryStream1, elementaryStream2 },
            MuxStreams = { muxStream0, muxStream1 }
        };

        JobTemplate newJobTemplate = new JobTemplate
        {
            Config = jobConfig
        };

        // Call the API.
        JobTemplate jobTemplate = client.CreateJobTemplate(parentLocation, newJobTemplate, templateId);
        return jobTemplate;
    }
}

Go

Before trying this sample, follow the Go setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Go API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import (
	"context"
	"fmt"
	"io"

	transcoder "cloud.google.com/go/video/transcoder/apiv1"
	"cloud.google.com/go/video/transcoder/apiv1/transcoderpb"
)

// createJobTemplate creates a template for a job. See
// https://cloud.google.com/transcoder/docs/how-to/job-templates#create_job_templates
// for more information.
func createJobTemplate(w io.Writer, projectID string, location string, templateID string) error {
	// projectID := "my-project-id"
	// location := "us-central1"
	// templateID := "my-job-template"
	ctx := context.Background()
	client, err := transcoder.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("NewClient: %w", err)
	}
	defer client.Close()

	req := &transcoderpb.CreateJobTemplateRequest{
		Parent:        fmt.Sprintf("projects/%s/locations/%s", projectID, location),
		JobTemplateId: templateID,
		JobTemplate: &transcoderpb.JobTemplate{
			Config: &transcoderpb.JobConfig{
				ElementaryStreams: []*transcoderpb.ElementaryStream{
					{
						Key: "video_stream0",
						ElementaryStream: &transcoderpb.ElementaryStream_VideoStream{
							VideoStream: &transcoderpb.VideoStream{
								CodecSettings: &transcoderpb.VideoStream_H264{
									H264: &transcoderpb.VideoStream_H264CodecSettings{
										BitrateBps:   550000,
										FrameRate:    60,
										HeightPixels: 360,
										WidthPixels:  640,
									},
								},
							},
						},
					},
					{
						Key: "video_stream1",
						ElementaryStream: &transcoderpb.ElementaryStream_VideoStream{
							VideoStream: &transcoderpb.VideoStream{
								CodecSettings: &transcoderpb.VideoStream_H264{
									H264: &transcoderpb.VideoStream_H264CodecSettings{
										BitrateBps:   2500000,
										FrameRate:    60,
										HeightPixels: 720,
										WidthPixels:  1280,
									},
								},
							},
						},
					},
					{
						Key: "audio_stream0",
						ElementaryStream: &transcoderpb.ElementaryStream_AudioStream{
							AudioStream: &transcoderpb.AudioStream{
								Codec:      "aac",
								BitrateBps: 64000,
							},
						},
					},
				},
				MuxStreams: []*transcoderpb.MuxStream{
					{
						Key:               "sd",
						Container:         "mp4",
						ElementaryStreams: []string{"video_stream0", "audio_stream0"},
					},
					{
						Key:               "hd",
						Container:         "mp4",
						ElementaryStreams: []string{"video_stream1", "audio_stream0"},
					},
				},
			},
		},
	}

	response, err := client.CreateJobTemplate(ctx, req)
	if err != nil {
		return fmt.Errorf("CreateJobTemplate: %w", err)
	}

	fmt.Fprintf(w, "Job template: %v", response.GetName())
	return nil
}

Java

Before trying this sample, follow the Java setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Java API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import com.google.cloud.video.transcoder.v1.AudioStream;
import com.google.cloud.video.transcoder.v1.CreateJobTemplateRequest;
import com.google.cloud.video.transcoder.v1.ElementaryStream;
import com.google.cloud.video.transcoder.v1.JobConfig;
import com.google.cloud.video.transcoder.v1.JobTemplate;
import com.google.cloud.video.transcoder.v1.LocationName;
import com.google.cloud.video.transcoder.v1.MuxStream;
import com.google.cloud.video.transcoder.v1.TranscoderServiceClient;
import com.google.cloud.video.transcoder.v1.VideoStream;
import java.io.IOException;

public class CreateJobTemplate {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "my-project-id";
    String location = "us-central1";
    String templateId = "my-job-template";

    createJobTemplate(projectId, location, templateId);
  }

  // Creates a job template.
  public static void createJobTemplate(String projectId, String location, String templateId)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests.
    try (TranscoderServiceClient transcoderServiceClient = TranscoderServiceClient.create()) {

      VideoStream videoStream0 =
          VideoStream.newBuilder()
              .setH264(
                  VideoStream.H264CodecSettings.newBuilder()
                      .setBitrateBps(550000)
                      .setFrameRate(60)
                      .setHeightPixels(360)
                      .setWidthPixels(640))
              .build();

      VideoStream videoStream1 =
          VideoStream.newBuilder()
              .setH264(
                  VideoStream.H264CodecSettings.newBuilder()
                      .setBitrateBps(2500000)
                      .setFrameRate(60)
                      .setHeightPixels(720)
                      .setWidthPixels(1280))
              .build();

      AudioStream audioStream0 =
          AudioStream.newBuilder().setCodec("aac").setBitrateBps(64000).build();

      JobConfig config =
          JobConfig.newBuilder()
              .addElementaryStreams(
                  ElementaryStream.newBuilder()
                      .setKey("video_stream0")
                      .setVideoStream(videoStream0))
              .addElementaryStreams(
                  ElementaryStream.newBuilder()
                      .setKey("video_stream1")
                      .setVideoStream(videoStream1))
              .addElementaryStreams(
                  ElementaryStream.newBuilder()
                      .setKey("audio_stream0")
                      .setAudioStream(audioStream0))
              .addMuxStreams(
                  MuxStream.newBuilder()
                      .setKey("sd")
                      .setContainer("mp4")
                      .addElementaryStreams("video_stream0")
                      .addElementaryStreams("audio_stream0")
                      .build())
              .addMuxStreams(
                  MuxStream.newBuilder()
                      .setKey("hd")
                      .setContainer("mp4")
                      .addElementaryStreams("video_stream1")
                      .addElementaryStreams("audio_stream0")
                      .build())
              .build();

      CreateJobTemplateRequest createJobTemplateRequest =
          CreateJobTemplateRequest.newBuilder()
              .setParent(LocationName.of(projectId, location).toString())
              .setJobTemplateId(templateId)
              .setJobTemplate(JobTemplate.newBuilder().setConfig(config).build())
              .build();

      // Send the job template creation request and process the response.
      JobTemplate jobTemplate = transcoderServiceClient.createJobTemplate(createJobTemplateRequest);
      System.out.println("Job template: " + jobTemplate.getName());
    }
  }
}

Node.js

Before trying this sample, follow the Node.js setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Node.js API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// projectId = 'my-project-id';
// location = 'us-central1';
// templateId = 'my-job-template';

// Imports the Transcoder library
const {TranscoderServiceClient} =
  require('@google-cloud/video-transcoder').v1;

// Instantiates a client
const transcoderServiceClient = new TranscoderServiceClient();

async function createJobTemplate() {
  // Construct request
  const request = {
    parent: transcoderServiceClient.locationPath(projectId, location),
    jobTemplateId: templateId,
    jobTemplate: {
      config: {
        elementaryStreams: [
          {
            key: 'video-stream0',
            videoStream: {
              h264: {
                heightPixels: 360,
                widthPixels: 640,
                bitrateBps: 550000,
                frameRate: 60,
              },
            },
          },
          {
            key: 'video-stream1',
            videoStream: {
              h264: {
                heightPixels: 720,
                widthPixels: 1280,
                bitrateBps: 2500000,
                frameRate: 60,
              },
            },
          },
          {
            key: 'audio-stream0',
            audioStream: {
              codec: 'aac',
              bitrateBps: 64000,
            },
          },
        ],
        muxStreams: [
          {
            key: 'sd',
            container: 'mp4',
            elementaryStreams: ['video-stream0', 'audio-stream0'],
          },
          {
            key: 'hd',
            container: 'mp4',
            elementaryStreams: ['video-stream1', 'audio-stream0'],
          },
        ],
      },
    },
  };

  // Run request
  const [jobTemplate] =
    await transcoderServiceClient.createJobTemplate(request);
  console.log(`Job template: ${jobTemplate.name}`);
}

createJobTemplate();

PHP

Before trying this sample, follow the PHP setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API PHP API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

use Google\Cloud\Video\Transcoder\V1\AudioStream;
use Google\Cloud\Video\Transcoder\V1\Client\TranscoderServiceClient;
use Google\Cloud\Video\Transcoder\V1\CreateJobTemplateRequest;
use Google\Cloud\Video\Transcoder\V1\ElementaryStream;
use Google\Cloud\Video\Transcoder\V1\JobConfig;
use Google\Cloud\Video\Transcoder\V1\JobTemplate;
use Google\Cloud\Video\Transcoder\V1\MuxStream;
use Google\Cloud\Video\Transcoder\V1\VideoStream;

/**
 * Creates a job template.
 *
 * @param string $projectId The ID of your Google Cloud Platform project.
 * @param string $location The location of the job template.
 * @param string $templateId The user-defined template ID.
 */
function create_job_template($projectId, $location, $templateId)
{
    // Instantiate a client.
    $transcoderServiceClient = new TranscoderServiceClient();

    $formattedParent = $transcoderServiceClient->locationName($projectId, $location);

    $jobTemplate = (new JobTemplate())->setConfig(
        (new JobConfig())->setElementaryStreams([
            (new ElementaryStream())
                ->setKey('video-stream0')
                ->setVideoStream(
                    (new VideoStream())->setH264(
                        (new VideoStream\H264CodecSettings())
                            ->setBitrateBps(550000)
                            ->setFrameRate(60)
                            ->setHeightPixels(360)
                            ->setWidthPixels(640)
                    )
                ),
            (new ElementaryStream())
                ->setKey('video-stream1')
                ->setVideoStream(
                    (new VideoStream())->setH264(
                        (new VideoStream\H264CodecSettings())
                            ->setBitrateBps(2500000)
                            ->setFrameRate(60)
                            ->setHeightPixels(720)
                            ->setWidthPixels(1280)
                    )
                ),
            (new ElementaryStream())
                ->setKey('audio-stream0')
                ->setAudioStream(
                    (new AudioStream())
                        ->setCodec('aac')
                        ->setBitrateBps(64000)
                )
        ])->setMuxStreams([
            (new MuxStream())
                ->setKey('sd')
                ->setContainer('mp4')
                ->setElementaryStreams(['video-stream0', 'audio-stream0']),
            (new MuxStream())
                ->setKey('hd')
                ->setContainer('mp4')
                ->setElementaryStreams(['video-stream1', 'audio-stream0'])
        ])
    );
    $request = (new CreateJobTemplateRequest())
        ->setParent($formattedParent)
        ->setJobTemplate($jobTemplate)
        ->setJobTemplateId($templateId);

    $response = $transcoderServiceClient->createJobTemplate($request);

    // Print job template name.
    printf('Job template: %s' . PHP_EOL, $response->getName());
}

Python

Before trying this sample, follow the Python setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Python API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import argparse

from google.cloud.video import transcoder_v1
from google.cloud.video.transcoder_v1.services.transcoder_service import (
    TranscoderServiceClient,
)


def create_job_template(
    project_id: str,
    location: str,
    template_id: str,
) -> transcoder_v1.types.resources.JobTemplate:
    """Creates a job template.

    Args:
        project_id: The GCP project ID.
        location: The location to store this template in.
        template_id: The user-defined template ID.

    Returns:
        The job template resource.
    """

    client = TranscoderServiceClient()

    parent = f"projects/{project_id}/locations/{location}"

    job_template = transcoder_v1.types.JobTemplate()
    job_template.name = (
        f"projects/{project_id}/locations/{location}/jobTemplates/{template_id}"
    )
    job_template.config = transcoder_v1.types.JobConfig(
        elementary_streams=[
            transcoder_v1.types.ElementaryStream(
                key="video-stream0",
                video_stream=transcoder_v1.types.VideoStream(
                    h264=transcoder_v1.types.VideoStream.H264CodecSettings(
                        height_pixels=360,
                        width_pixels=640,
                        bitrate_bps=550000,
                        frame_rate=60,
                    ),
                ),
            ),
            transcoder_v1.types.ElementaryStream(
                key="video-stream1",
                video_stream=transcoder_v1.types.VideoStream(
                    h264=transcoder_v1.types.VideoStream.H264CodecSettings(
                        height_pixels=720,
                        width_pixels=1280,
                        bitrate_bps=2500000,
                        frame_rate=60,
                    ),
                ),
            ),
            transcoder_v1.types.ElementaryStream(
                key="audio-stream0",
                audio_stream=transcoder_v1.types.AudioStream(
                    codec="aac", bitrate_bps=64000
                ),
            ),
        ],
        mux_streams=[
            transcoder_v1.types.MuxStream(
                key="sd",
                container="mp4",
                elementary_streams=["video-stream0", "audio-stream0"],
            ),
            transcoder_v1.types.MuxStream(
                key="hd",
                container="mp4",
                elementary_streams=["video-stream1", "audio-stream0"],
            ),
        ],
    )

    response = client.create_job_template(
        parent=parent, job_template=job_template, job_template_id=template_id
    )
    print(f"Job template: {response.name}")
    return response

Ruby

Before trying this sample, follow the Ruby setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Ruby API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

# project_id  = "YOUR-GOOGLE-CLOUD-PROJECT"  # (e.g. "my-project")
# location    = "YOUR-JOB-TEMPLATE-LOCATION"  # (e.g. "us-central1")
# template_id = "YOUR-JOB-TEMPLATE"  # (e.g. "my-job-template")

# Require the Transcoder client library.
require "google/cloud/video/transcoder"

# Create a Transcoder client.
client = Google::Cloud::Video::Transcoder.transcoder_service

# Build the resource name of the parent.
parent = client.location_path project: project_id, location: location

# Build the job template.
new_job_template = {
  config: {
    elementary_streams: [
      {
        key: "video-stream0",
        video_stream: {
          h264: {
            height_pixels: 360,
            width_pixels: 640,
            bitrate_bps: 550_000,
            frame_rate: 60
          }
        }
      },
      {
        key: "video-stream1",
        video_stream: {
          h264: {
            height_pixels: 720,
            width_pixels: 1280,
            bitrate_bps: 2_500_000,
            frame_rate: 60
          }
        }
      },
      {
        key: "audio-stream0",
        audio_stream: {
          codec: "aac",
          bitrate_bps: 64_000
        }
      }
    ],
    mux_streams: [
      {
        key: "sd",
        container: "mp4",
        elementary_streams: [
          "video-stream0",
          "audio-stream0"
        ]
      },
      {
        key: "hd",
        container: "mp4",
        elementary_streams: [
          "video-stream1",
          "audio-stream0"
        ]
      }
    ]
  }
}

job_template = client.create_job_template parent: parent, job_template: new_job_template, job_template_id: template_id

# Print the job template name.
puts "Job template: #{job_template.name}"

Getting job template details

To get the details for a job template, use the projects.locations.jobTemplates.get method.

REST

Before using any of the request data, make the following replacements:

TEMPLATE_ID: The ID of the job template you created.

PROJECT_ID: Your Google Cloud project ID.

LOCATION: The location of your job template. Use one of the supported regions.

Show locations

• us-central1
• us-west1
• us-west2
• us-east1
• us-east4
• southamerica-east1
• northamerica-northeast1
• asia-east1
• asia-northeast1
• asia-northeast3
• asia-south1
• asia-southeast1
• australia-southeast1
• europe-west1
• europe-west2
• europe-west4

To send your request, expand one of these options:

curl (Linux, macOS, or Cloud Shell)

Note: The following command assumes that you have logged in to the gcloud CLI with your user account by running gcloud init or gcloud auth login , or by using Cloud Shell, which automatically logs you into the gcloud CLI . You can check the currently active account by running gcloud auth list.

Execute the following command:

curl -X GET \
     -H "Authorization: Bearer $(gcloud auth print-access-token)" \
     "https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobTemplates/TEMPLATE_ID"

PowerShell (Windows)

Note: The following command assumes that you have logged in to the gcloud CLI with your user account by running gcloud init or gcloud auth login . You can check the currently active account by running gcloud auth list.

Execute the following command:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method GET `
    -Headers $headers `
    -Uri "https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobTemplates/TEMPLATE_ID" | Select-Object -Expand Content

You should receive a JSON response similar to the following:

{
  "name": "projects/PROJECT_NUMBER/locations/LOCATION/jobTemplates/TEMPLATE_ID",
  "config": {
    "inputs": [
      {
        "key": "input0"
      }
    ],
    "editList": [
      {
        "key": "atom0",
        "inputs": [
          "input0"
        ],
        "startTimeOffset": "0s"
      }
    ],
    "elementaryStreams": [
      {
        "videoStream": {
          "h264": {
            "widthPixels": 640,
            "heightPixels": 360,
            "frameRate": 60,
            "bitrateBps": 550000,
            "pixelFormat": "yuv420p",
            "rateControlMode": "vbr",
            "crfLevel": 21,
            "gopDuration": "3s",
            "vbvSizeBits": 550000,
            "vbvFullnessBits": 495000,
            "entropyCoder": "cabac",
            "profile": "high",
            "preset": "veryfast"
          }
        },
        "key": "video-stream0"
      },
      {
        "videoStream": {
          "h264": {
            "widthPixels": 1280,
            "heightPixels": 720,
            "frameRate": 60,
            "bitrateBps": 2500000,
            "pixelFormat": "yuv420p",
            "rateControlMode": "vbr",
            "crfLevel": 21,
            "gopDuration": "3s",
            "vbvSizeBits": 2500000,
            "vbvFullnessBits": 2250000,
            "entropyCoder": "cabac",
            "profile": "high",
            "preset": "veryfast"
          }
        },
        "key": "video-stream1"
      },
      {
        "audioStream": {
          "codec": "aac",
          "bitrateBps": 64000,
          "channelCount": 2,
          "channelLayout": [
            "fl",
            "fr"
          ],
          "sampleRateHertz": 48000
        },
        "key": "audio-stream0"
      }
    ],
    "muxStreams": [
      {
        "key": "sd",
        "fileName": "sd.mp4",
        "container": "mp4",
        "elementaryStreams": [
          "video-stream0",
          "audio-stream0"
        ]
      },
      {
        "key": "hd",
        "fileName": "hd.mp4",
        "container": "mp4",
        "elementaryStreams": [
          "video-stream1",
          "audio-stream0"
        ]
      }
    ],
    "output": {}
  }
}

gcloud

1. Make the following replacements for the gcloud command:
• TEMPLATE_ID: The ID of the job template you created.
• LOCATION: The location of your job template. Use one of the supported regions.
  Show locations
  • us-central1
  • us-west1
  • us-west2
  • us-east1
  • us-east4
  • southamerica-east1
  • northamerica-northeast1
  • asia-east1
  • asia-northeast1
  • asia-northeast3
  • asia-south1
  • asia-southeast1
  • australia-southeast1
  • europe-west1
  • europe-west2
  • europe-west4
2. Run the following command:

   gcloud transcoder templates describe TEMPLATE_ID --location=LOCATION

   You should see a response similar to the following:

   {
     "name": "projects/PROJECT_NUMBER/locations/LOCATION/jobTemplates/TEMPLATE_ID",
     "config": {
       "inputs": [
         {
           "key": "input0"
         }
       ],
       "editList": [
         {
           "key": "atom0",
           "inputs": [
             "input0"
           ],
           "startTimeOffset": "0s"
         }
       ],
       "elementaryStreams": [
         {
           "videoStream": {
             "h264": {
               "widthPixels": 640,
               "heightPixels": 360,
               "frameRate": 60,
               "bitrateBps": 550000,
               "pixelFormat": "yuv420p",
               "rateControlMode": "vbr",
               "crfLevel": 21,
               "gopDuration": "3s",
               "vbvSizeBits": 550000,
               "vbvFullnessBits": 495000,
               "entropyCoder": "cabac",
               "profile": "high",
               "preset": "veryfast"
             }
           },
           "key": "video-stream0"
         },
         {
           "videoStream": {
             "h264": {
               "widthPixels": 1280,
               "heightPixels": 720,
               "frameRate": 60,
               "bitrateBps": 2500000,
               "pixelFormat": "yuv420p",
               "rateControlMode": "vbr",
               "crfLevel": 21,
               "gopDuration": "3s",
               "vbvSizeBits": 2500000,
               "vbvFullnessBits": 2250000,
               "entropyCoder": "cabac",
               "profile": "high",
               "preset": "veryfast"
             }
           },
           "key": "video-stream1"
         },
         {
           "audioStream": {
             "codec": "aac",
             "bitrateBps": 64000,
             "channelCount": 2,
             "channelLayout": [
               "fl",
               "fr"
             ],
             "sampleRateHertz": 48000
           },
           "key": "audio-stream0"
         }
       ],
       "muxStreams": [
         {
           "key": "sd",
           "fileName": "sd.mp4",
           "container": "mp4",
           "elementaryStreams": [
             "video-stream0",
             "audio-stream0"
           ]
         },
         {
           "key": "hd",
           "fileName": "hd.mp4",
           "container": "mp4",
           "elementaryStreams": [
             "video-stream1",
             "audio-stream0"
           ]
         }
       ],
       "output": {}
     }
   }
   

C#

Before trying this sample, follow the C# setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API C# API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

using Google.Cloud.Video.Transcoder.V1;

public class GetJobTemplateSample
{
    public JobTemplate GetJobTemplate(string projectId, string location, string templateId)
    {
        // Create the client.
        TranscoderServiceClient client = TranscoderServiceClient.Create();

        // Build the job template name.
        JobTemplateName name = JobTemplateName.FromProjectLocationJobTemplate(projectId, location, templateId);

        // Call the API.
        JobTemplate jobTemplate = client.GetJobTemplate(name);

        // Return the result.
        return jobTemplate;
    }
}

Go

Before trying this sample, follow the Go setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Go API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import (
	"context"
	"fmt"
	"io"

	transcoder "cloud.google.com/go/video/transcoder/apiv1"
	"cloud.google.com/go/video/transcoder/apiv1/transcoderpb"
)

// getJobTemplate gets a previously-created job template. See
// https://cloud.google.com/transcoder/docs/how-to/job-templates#get_job_template
// for more information.
func getJobTemplate(w io.Writer, projectID string, location string, templateID string) error {
	// projectID := "my-project-id"
	// location := "us-central1"
	// templateID := "my-job-template"
	ctx := context.Background()
	client, err := transcoder.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("NewClient: %w", err)
	}
	defer client.Close()

	req := &transcoderpb.GetJobTemplateRequest{
		Name: fmt.Sprintf("projects/%s/locations/%s/jobTemplates/%s", projectID, location, templateID),
	}

	response, err := client.GetJobTemplate(ctx, req)
	if err != nil {
		return fmt.Errorf("GetJobTemplate: %w", err)
	}

	fmt.Fprintf(w, "Job template: %v", response.GetName())
	return nil
}

Java

Before trying this sample, follow the Java setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Java API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import com.google.cloud.video.transcoder.v1.GetJobTemplateRequest;
import com.google.cloud.video.transcoder.v1.JobTemplate;
import com.google.cloud.video.transcoder.v1.JobTemplateName;
import com.google.cloud.video.transcoder.v1.TranscoderServiceClient;
import java.io.IOException;

public class GetJobTemplate {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "my-project-id";
    String location = "us-central1";
    String templateId = "my-job-template";

    getJobTemplate(projectId, location, templateId);
  }

  // Gets a job template.
  public static void getJobTemplate(String projectId, String location, String templateId)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests.
    try (TranscoderServiceClient transcoderServiceClient = TranscoderServiceClient.create()) {
      JobTemplateName jobTemplateName =
          JobTemplateName.newBuilder()
              .setProject(projectId)
              .setLocation(location)
              .setJobTemplate(templateId)
              .build();
      GetJobTemplateRequest getJobTemplateRequest =
          GetJobTemplateRequest.newBuilder().setName(jobTemplateName.toString()).build();

      // Send the get job template request and process the response.
      JobTemplate jobTemplate = transcoderServiceClient.getJobTemplate(getJobTemplateRequest);
      System.out.println("Job template: " + jobTemplate.getName());
    }
  }
}

Node.js

Before trying this sample, follow the Node.js setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Node.js API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// projectId = 'my-project-id';
// location = 'us-central1';
// templateId = 'my-job-template';

// Imports the Transcoder library
const {TranscoderServiceClient} =
  require('@google-cloud/video-transcoder').v1;

// Instantiates a client
const transcoderServiceClient = new TranscoderServiceClient();

async function getJobTemplate() {
  // Construct request
  const request = {
    name: transcoderServiceClient.jobTemplatePath(
      projectId,
      location,
      templateId
    ),
  };
  const [jobTemplate] = await transcoderServiceClient.getJobTemplate(request);
  console.log(`Job template: ${jobTemplate.name}`);
}

getJobTemplate();

PHP

Before trying this sample, follow the PHP setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API PHP API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

use Google\Cloud\Video\Transcoder\V1\Client\TranscoderServiceClient;
use Google\Cloud\Video\Transcoder\V1\GetJobTemplateRequest;

/**
 * Gets a Transcoder job template.
 *
 * @param string $projectId The ID of your Google Cloud Platform project.
 * @param string $location The location of the job template.
 * @param string $templateId The user-defined template ID.
 */
function get_job_template($projectId, $location, $templateId)
{
    // Instantiate a client.
    $transcoderServiceClient = new TranscoderServiceClient();

    $formattedName = $transcoderServiceClient->jobTemplateName($projectId, $location, $templateId);
    $request = (new GetJobTemplateRequest())
        ->setName($formattedName);
    $template = $transcoderServiceClient->getJobTemplate($request);

    // Print job template name.
    printf('Job template: %s' . PHP_EOL, $template->getName());
}

Python

Before trying this sample, follow the Python setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Python API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import argparse

from google.cloud.video import transcoder_v1
from google.cloud.video.transcoder_v1.services.transcoder_service import (
    TranscoderServiceClient,
)


def get_job_template(
    project_id: str,
    location: str,
    template_id: str,
) -> transcoder_v1.types.resources.JobTemplate:
    """Gets a job template.

    Args:
        project_id: The GCP project ID.
        location: The location of the template.
        template_id: The user-defined template ID.

    Returns:
        The job template resource.
    """

    client = TranscoderServiceClient()

    name = f"projects/{project_id}/locations/{location}/jobTemplates/{template_id}"
    response = client.get_job_template(name=name)
    print(f"Job template: {response.name}")
    return response

Ruby

Before trying this sample, follow the Ruby setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Ruby API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

# project_id  = "YOUR-GOOGLE-CLOUD-PROJECT"  # (e.g. "my-project")
# location    = "YOUR-JOB-TEMPLATE-LOCATION"  # (e.g. "us-central1")
# template_id = "YOUR-JOB-TEMPLATE"  # (e.g. "my-job-template")

# Require the Transcoder client library.
require "google/cloud/video/transcoder"

# Create a Transcoder client.
client = Google::Cloud::Video::Transcoder.transcoder_service

# Build the resource name of the job template.
name = client.job_template_path project: project_id, location: location, job_template: template_id

# Get the job template.
job_template = client.get_job_template name: name

# Print the job template name.
puts "Job template: #{job_template.name}"

Listing job templates

If you want to review all the job templates you created in a location, use the projects.locations.jobTemplates.list method.

REST

Before using any of the request data, make the following replacements:

PROJECT_ID: Your Google Cloud project ID.

LOCATION: The location of your job template. Use one of the supported regions.

Show locations

• us-central1
• us-west1
• us-west2
• us-east1
• us-east4
• southamerica-east1
• northamerica-northeast1
• asia-east1
• asia-northeast1
• asia-northeast3
• asia-south1
• asia-southeast1
• australia-southeast1
• europe-west1
• europe-west2
• europe-west4

To send your request, expand one of these options:

curl (Linux, macOS, or Cloud Shell)

Note: The following command assumes that you have logged in to the gcloud CLI with your user account by running gcloud init or gcloud auth login , or by using Cloud Shell, which automatically logs you into the gcloud CLI . You can check the currently active account by running gcloud auth list.

Execute the following command:

curl -X GET \
     -H "Authorization: Bearer $(gcloud auth print-access-token)" \
     "https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobTemplates"

PowerShell (Windows)

Note: The following command assumes that you have logged in to the gcloud CLI with your user account by running gcloud init or gcloud auth login . You can check the currently active account by running gcloud auth list.

Execute the following command:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method GET `
    -Headers $headers `
    -Uri "https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobTemplates" | Select-Object -Expand Content

You should receive a JSON response similar to the following:

{
  "jobTemplates": [
    {
      "name": "projects/PROJECT_NUMBER/locations/LOCATION/jobTemplates/TEMPLATE_ID",
      "config": {
         ...
      }
    },
    {
      "name": "projects/PROJECT_NUMBER/locations/LOCATION/jobTemplates/my-other-template",
      "config": {
         ...
      }
    }
  ]
}

gcloud

1. Make the following replacements for the gcloud command:
• LOCATION: The location of your job template(s). Use one of the supported regions.
  Show locations
  • us-central1
  • us-west1
  • us-west2
  • us-east1
  • us-east4
  • southamerica-east1
  • northamerica-northeast1
  • asia-east1
  • asia-northeast1
  • asia-northeast3
  • asia-south1
  • asia-southeast1
  • australia-southeast1
  • europe-west1
  • europe-west2
  • europe-west4
2. Run the following command:

   gcloud transcoder templates list --location=LOCATION

   You should see a response similar to the following:

   NAME
   projects/PROJECT_NUMBER/locations/LOCATION/jobTemplates/TEMPLATE_ID
   projects/PROJECT_NUMBER/locations/LOCATION/jobTemplates/my-other-template
   

C#

Before trying this sample, follow the C# setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API C# API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

using Google.Cloud.Video.Transcoder.V1;
using Google.Api.Gax.ResourceNames;
using Google.Api.Gax;
using System.Linq;
using System.Collections.Generic;

public class ListJobTemplatesSample
{
    public IList<JobTemplate> ListJobTemplates(string projectId, string location)
    {
        // Create the client.
        TranscoderServiceClient client = TranscoderServiceClient.Create();

        // Build the parent location name.
        LocationName parentLocation = new LocationName(projectId, location);

        // Call the API.
        PagedEnumerable<ListJobTemplatesResponse, JobTemplate> response = client.ListJobTemplates(parentLocation);

        // The returned sequence will lazily perform RPCs as it's being iterated over.
        return response.ToList();
    }
}

Go

Before trying this sample, follow the Go setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Go API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import (
	"context"
	"fmt"
	"io"

	"google.golang.org/api/iterator"

	transcoder "cloud.google.com/go/video/transcoder/apiv1"
	"cloud.google.com/go/video/transcoder/apiv1/transcoderpb"
)

// listJobTemplates gets all previously-created job templates for a given
// location. See
// https://cloud.google.com/transcoder/docs/how-to/job-templates#list_job_template
// for more information.
func listJobTemplates(w io.Writer, projectID string, location string) error {
	// projectID := "my-project-id"
	// location := "us-central1"
	ctx := context.Background()
	client, err := transcoder.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("NewClient: %w", err)
	}
	defer client.Close()

	req := &transcoderpb.ListJobTemplatesRequest{
		Parent: fmt.Sprintf("projects/%s/locations/%s", projectID, location),
	}

	it := client.ListJobTemplates(ctx, req)
	fmt.Fprintln(w, "Job templates:")
	for {
		response, err := it.Next()
		if err == iterator.Done {
			break
		}
		if err != nil {
			return fmt.Errorf("ListJobTemplates: %w", err)
		}
		fmt.Fprintln(w, response.GetName())
	}

	return nil
}

Java

Before trying this sample, follow the Java setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Java API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import com.google.cloud.video.transcoder.v1.JobTemplate;
import com.google.cloud.video.transcoder.v1.ListJobTemplatesRequest;
import com.google.cloud.video.transcoder.v1.LocationName;
import com.google.cloud.video.transcoder.v1.TranscoderServiceClient;
import java.io.IOException;

public class ListJobTemplates {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "my-project-id";
    String location = "us-central1";

    listJobTemplates(projectId, location);
  }

  // Lists the job templates for a given location.
  public static void listJobTemplates(String projectId, String location) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests.
    try (TranscoderServiceClient transcoderServiceClient = TranscoderServiceClient.create()) {

      ListJobTemplatesRequest listJobTemplatesRequest =
          ListJobTemplatesRequest.newBuilder()
              .setParent(LocationName.of(projectId, location).toString())
              .build();

      // Send the list job templates request and process the response.
      TranscoderServiceClient.ListJobTemplatesPagedResponse response =
          transcoderServiceClient.listJobTemplates(listJobTemplatesRequest);
      System.out.println("Job templates:");

      for (JobTemplate jobTemplate : response.iterateAll()) {
        System.out.println(jobTemplate.getName());
      }
    }
  }
}

Node.js

Before trying this sample, follow the Node.js setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Node.js API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// projectId = 'my-project-id';
// location = 'us-central1';

// Imports the Transcoder library
const {TranscoderServiceClient} =
  require('@google-cloud/video-transcoder').v1;

// Instantiates a client
const transcoderServiceClient = new TranscoderServiceClient();

async function listJobTemplates() {
  const iterable = await transcoderServiceClient.listJobTemplatesAsync({
    parent: transcoderServiceClient.locationPath(projectId, location),
  });
  console.info('Job templates:');
  for await (const response of iterable) {
    console.log(response.name);
  }
}

listJobTemplates();

PHP

Before trying this sample, follow the PHP setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API PHP API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

use Google\Cloud\Video\Transcoder\V1\Client\TranscoderServiceClient;
use Google\Cloud\Video\Transcoder\V1\ListJobTemplatesRequest;

/**
 * Lists all Transcoder job templates in a location.
 *
 * @param string $projectId The ID of your Google Cloud Platform project.
 * @param string $location The location of the job templates.
 */
function list_job_templates($projectId, $location)
{
    // Instantiate a client.
    $transcoderServiceClient = new TranscoderServiceClient();

    $formattedParent = $transcoderServiceClient->locationName($projectId, $location);
    $request = (new ListJobTemplatesRequest())
        ->setParent($formattedParent);
    $response = $transcoderServiceClient->listJobTemplates($request);

    // Print job template list.
    $jobTemplates = $response->iterateAllElements();
    print('Job templates:' . PHP_EOL);
    foreach ($jobTemplates as $jobTemplate) {
        printf('%s' . PHP_EOL, $jobTemplate->getName());
    }
}

Python

Before trying this sample, follow the Python setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Python API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import argparse

from google.cloud.video.transcoder_v1.services.transcoder_service import (
    pagers,
    TranscoderServiceClient,
)


def list_job_templates(
    project_id: str,
    location: str,
) -> pagers.ListJobTemplatesPager:
    """Lists all job templates in a location.

    Args:
        project_id: The GCP project ID.
        location: The location of the templates.

    Returns:
        An iterable object containing job template resources.
    """

    client = TranscoderServiceClient()

    parent = f"projects/{project_id}/locations/{location}"
    response = client.list_job_templates(parent=parent)
    print("Job templates:")
    for jobTemplate in response.job_templates:
        print({jobTemplate.name})

    return response

Ruby

Before trying this sample, follow the Ruby setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Ruby API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

# project_id  = "YOUR-GOOGLE-CLOUD-PROJECT"  # (e.g. "my-project")
# location    = "YOUR-JOB-TEMPLATE-LOCATION"  # (e.g. "us-central1")

# Require the Transcoder client library.
require "google/cloud/video/transcoder"

# Create a Transcoder client.
client = Google::Cloud::Video::Transcoder.transcoder_service

# Build the resource name of the parent.
parent = client.location_path project: project_id, location: location

# Get the list of job templates.
response = client.list_job_templates parent: parent

puts "Job templates:"
# Print out all job templates.
response.each do |job_template|
  puts job_template.name
end

This response may include a nextPageToken, which you can use to retrieve additional results:

{
  "jobTemplates": [
    ...
  ],
  "nextPageToken": "NEXT_PAGE_TOKEN"
}

In the following curl example, you can then send another request, and include the value of NEXT_PAGE_TOKEN to list additional job templates, similar to the following:

curl -X GET \
-H "Authorization: Bearer "$(gcloud auth application-default print-access-token) \
https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobTemplates?pageToken=NEXT_PAGE_TOKEN

See the relevant client library for more information on using this token.

Deleting job templates

To delete a job template, use the projects.locations.jobTemplates.delete method.

REST

Before using any of the request data, make the following replacements:

TEMPLATE_ID: The ID of the job template you created.

PROJECT_ID: Your Google Cloud project ID.

LOCATION: The location of your job template. Use one of the supported regions.

Show locations

• us-central1
• us-west1
• us-west2
• us-east1
• us-east4
• southamerica-east1
• northamerica-northeast1
• asia-east1
• asia-northeast1
• asia-northeast3
• asia-south1
• asia-southeast1
• australia-southeast1
• europe-west1
• europe-west2
• europe-west4

To send your request, expand one of these options:

curl (Linux, macOS, or Cloud Shell)

Note: The following command assumes that you have logged in to the gcloud CLI with your user account by running gcloud init or gcloud auth login , or by using Cloud Shell, which automatically logs you into the gcloud CLI . You can check the currently active account by running gcloud auth list.

Execute the following command:

curl -X DELETE \
     -H "Authorization: Bearer $(gcloud auth print-access-token)" \
     "https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobTemplates/TEMPLATE_ID"

PowerShell (Windows)

Note: The following command assumes that you have logged in to the gcloud CLI with your user account by running gcloud init or gcloud auth login . You can check the currently active account by running gcloud auth list.

Execute the following command:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method DELETE `
    -Headers $headers `
    -Uri "https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobTemplates/TEMPLATE_ID" | Select-Object -Expand Content

You should receive a JSON response similar to the following:

{}

gcloud

1. Make the following replacements for the gcloud command:
• TEMPLATE_ID: The ID of the job template you created.
• LOCATION: The location of your job template. Use one of the supported regions.
  Show locations
  • us-central1
  • us-west1
  • us-west2
  • us-east1
  • us-east4
  • southamerica-east1
  • northamerica-northeast1
  • asia-east1
  • asia-northeast1
  • asia-northeast3
  • asia-south1
  • asia-southeast1
  • australia-southeast1
  • europe-west1
  • europe-west2
  • europe-west4
2. Run the following command:

   gcloud transcoder templates delete TEMPLATE_ID --location=LOCATION

   You should see a response similar to the following:

   Deleted template [projects/PROJECT_ID/locations/LOCATION/jobTemplates/TEMPLATE_ID].
   

C#

Before trying this sample, follow the C# setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API C# API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

using Google.Cloud.Video.Transcoder.V1;

public class DeleteJobTemplateSample
{
    public void DeleteJobTemplate(string projectId, string location, string templateId)
    {
        // Create the client.
        TranscoderServiceClient client = TranscoderServiceClient.Create();

        // Build the job template name.
        JobTemplateName name = JobTemplateName.FromProjectLocationJobTemplate(projectId, location, templateId);

        // Call the API.
        client.DeleteJobTemplate(name);
    }
}

Go

Before trying this sample, follow the Go setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Go API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import (
	"context"
	"fmt"
	"io"

	transcoder "cloud.google.com/go/video/transcoder/apiv1"
	"cloud.google.com/go/video/transcoder/apiv1/transcoderpb"
)

// deleteJobTemplate deletes a previously-created template for a job. See
// https://cloud.google.com/transcoder/docs/how-to/job-templates#delete_job_template
// for more information.
func deleteJobTemplate(w io.Writer, projectID string, location string, templateID string) error {
	// projectID := "my-project-id"
	// location := "us-central1"
	// templateID := "my-job-template"
	ctx := context.Background()
	client, err := transcoder.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("NewClient: %w", err)
	}
	defer client.Close()

	req := &transcoderpb.DeleteJobTemplateRequest{
		Name: fmt.Sprintf("projects/%s/locations/%s/jobTemplates/%s", projectID, location, templateID),
	}

	err = client.DeleteJobTemplate(ctx, req)
	if err != nil {
		return fmt.Errorf("DeleteJobTemplate: %w", err)
	}

	fmt.Fprintf(w, "Deleted job template")
	return nil
}

Java

Before trying this sample, follow the Java setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Java API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import com.google.cloud.video.transcoder.v1.DeleteJobTemplateRequest;
import com.google.cloud.video.transcoder.v1.JobTemplateName;
import com.google.cloud.video.transcoder.v1.TranscoderServiceClient;
import java.io.IOException;

public class DeleteJobTemplate {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "my-project-id";
    String location = "us-central1";
    String templateId = "my-job-template";

    deleteJobTemplate(projectId, location, templateId);
  }

  // Deletes a job template.
  public static void deleteJobTemplate(String projectId, String location, String templateId)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests.
    try (TranscoderServiceClient transcoderServiceClient = TranscoderServiceClient.create()) {
      JobTemplateName jobTemplateName =
          JobTemplateName.newBuilder()
              .setProject(projectId)
              .setLocation(location)
              .setJobTemplate(templateId)
              .build();
      DeleteJobTemplateRequest deleteJobTemplateRequest =
          DeleteJobTemplateRequest.newBuilder().setName(jobTemplateName.toString()).build();

      // Send the delete job template request and process the response.
      transcoderServiceClient.deleteJobTemplate(deleteJobTemplateRequest);
      System.out.println("Deleted job template");
    }
  }
}

Node.js

Before trying this sample, follow the Node.js setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Node.js API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// projectId = 'my-project-id';
// location = 'us-central1';
// templateId = 'my-job-template';

// Imports the Transcoder library
const {TranscoderServiceClient} =
  require('@google-cloud/video-transcoder').v1;

// Instantiates a client
const transcoderServiceClient = new TranscoderServiceClient();

async function deleteJobTemplate() {
  // Construct request
  const request = {
    name: transcoderServiceClient.jobTemplatePath(
      projectId,
      location,
      templateId
    ),
  };
  await transcoderServiceClient.deleteJobTemplate(request);
  console.log('Deleted job template');
}

deleteJobTemplate();

PHP

Before trying this sample, follow the PHP setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API PHP API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

use Google\Cloud\Video\Transcoder\V1\Client\TranscoderServiceClient;
use Google\Cloud\Video\Transcoder\V1\DeleteJobTemplateRequest;

/**
 * Deletes a Transcoder job template.
 *
 * @param string $projectId The ID of your Google Cloud Platform project.
 * @param string $location The location of the job template.
 * @param string $templateId The user-defined template ID.
 */
function delete_job_template($projectId, $location, $templateId)
{
    // Instantiate a client.
    $transcoderServiceClient = new TranscoderServiceClient();

    $formattedName = $transcoderServiceClient->jobTemplateName($projectId, $location, $templateId);
    $request = (new DeleteJobTemplateRequest())
        ->setName($formattedName);
    $transcoderServiceClient->deleteJobTemplate($request);

    print('Deleted job template' . PHP_EOL);
}

Python

Before trying this sample, follow the Python setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Python API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import argparse

from google.cloud.video.transcoder_v1.services.transcoder_service import (
    TranscoderServiceClient,
)


def delete_job_template(
    project_id: str,
    location: str,
    template_id: str,
) -> None:
    """Deletes a job template.

    Args:
        project_id: The GCP project ID.
        location: The location of the template.
        template_id: The user-defined template ID."""

    client = TranscoderServiceClient()

    name = f"projects/{project_id}/locations/{location}/jobTemplates/{template_id}"
    response = client.delete_job_template(name=name)
    print("Deleted job template")
    return response

Ruby

Before trying this sample, follow the Ruby setup instructions in the Transcoder API quickstart using client libraries. For more information, see the Transcoder API Ruby API reference documentation.

To authenticate to Transcoder API, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

# project_id = "YOUR-GOOGLE-CLOUD-PROJECT"  # (e.g. "my-project")
# location    = "YOUR-JOB-TEMPLATE-LOCATION"  # (e.g. "us-central1")
# template_id = "YOUR-JOB-TEMPLATE"  # (e.g. "my-job-template")

# Require the Transcoder client library.
require "google/cloud/video/transcoder"

# Create a Transcoder client.
client = Google::Cloud::Video::Transcoder.transcoder_service

# Build the resource name of the job template.
name = client.job_template_path project: project_id, location: location, job_template: template_id

# Delete the job template.
client.delete_job_template name: name

# Print a success message.
puts "Deleted job template"

What's next

Learn about Creating and managing jobs.