상세한 스캔 결과를 위해 infoType 감지기 수정

Sensitive Data Protection의 기본 제공 infoType 감지기는 일반적인 유형의 민감한 정보를 찾는 데 효과적입니다. 커스텀 infoType 감지기를 사용하면 직접 만든 민감한 정보 감지기를 세부적으로 맞춤설정할 수 있습니다. 검사 규칙을 사용하면 특정 infoType 감지기의 감지 메커니즘을 수정하여 Sensitive Data Protection에서 반환하는 스캔 결과를 상세검색할 수 있습니다.

기본 제공 infoType 감지기에서 반환하는 결과에서 값을 제외하거나 더 많은 값을 포함하려는 경우 스크래치에서 새 커스텀 infoType을 만들고 Sensitive Data Protection에서 찾아야 할 모든 기준을 정의할 수 있습니다. 또는 Sensitive Data Protection의 기본 제공 또는 커스텀 감지기에서 반환하는 발견 항목을 지정한 기준에 따라 상세검색할 수 있습니다. 이렇게 하려면 스캔 결과의 노이즈를 줄이고 정확성을 높이거나 가능성을 조정하는 데 사용할 수 있는 검사 규칙을 추가하면 됩니다.

이 주제에서는 두 가지 유형의 검사 규칙을 사용하여 직접 지정하는 커스텀 기준에 따라 특정 결과를 제외하거나 추가 결과를 더하는 방법을 설명합니다. 이 주제에는 기존 infoType 감지기를 변경하는 편이 좋은 여러 시나리오가 제시됩니다.

참고: 이 주제에서 설명하는 방법은 스캔의 속도를 높이기 위한 것은 아니지만 출력의 양과 저장되는 결과의 수를 줄여 노이즈를 줄이는 데 도움이 될 수 있습니다.

검사 규칙의 두 가지 유형은 다음과 같습니다.

• 제외 규칙은 잘못된 결과나 원치 않는 결과를 제외하는 데 사용됩니다.
• 핫워드 규칙은 부가적인 결과를 감지하는 데 사용됩니다.

제외 규칙

제외 규칙은 다음과 같은 상황에 유용합니다.

• 결과에서 중복되는 infoType 감지기로 인해 발생하는 중복된 스캔 일치 항목을 제외하려고 합니다. 예를 들어 이메일 주소와 전화번호를 스캔하는 중에 전화번호가 포함된 이메일 주소에 대해 두 건의 조회가 발생하는 경우가 있습니다(예: [e-mail]).
• 스캔 결과에 노이즈가 있습니다. 예를 들어 정상 이메일 주소 스캔에서 똑같은 모조 이메일 주소(예: [e-mail]) 또는 도메인(예: example.com)이 지나치게 많이 반환되는 경우가 있습니다.
• 결과에서 제외하고자 하는 용어, 구문 또는 문자 조합의 목록이 있습니다.
• 결과에서 전체 데이터 열을 제외하려고 합니다.
• 정규 표현식과 일치하는 문자열 근처에 있는 발견 항목을 제외하려고 합니다.

제외 규칙 API 개요

Sensitive Data Protection은 ExclusionRule 객체에 제외 규칙을 정의합니다. ExclusionRule 내에서 다음 중 하나를 지정합니다.

• 결과에서 제외할 문자열 목록이 포함된 Dictionary 객체.
• 정규 표현식 패턴을 정의하는 Regex 객체. 패턴과 일치하는 문자열은 결과에서 제외됩니다.
• ExcludeInfoTypes 객체: infoType 감지기 배열을 포함합니다. 결과에서 이 목록에 포함된 infoType 감지기 중 어느 하나와 일치하는 항목이 있는 경우 결과에서 결과가 제외됩니다.

• 다음을 포함하는 ExcludeByHotword 객체:

  • 핫워드를 정의하는 정규 표현식입니다.
  • 핫워드에 가까운 정도를 정의하는 proximity 값입니다.

  발견 항목이 설정된 근접 내에 있으면 해당 결과가 결과에서 제외됩니다. 테이블의 경우 이 제외 규칙 유형을 사용하면 전체 데이터 열을 결과에서 제외할 수 있습니다.

제외 규칙 예시 시나리오

다음 각 JSON 스니펫에서는 특정 시나리오에서 Sensitive Data Protection을 구성하는 방법을 보여줍니다.

EMAIL_ADDRESS 감지기 스캔에서 특정 이메일 주소 생략

다음 JSON 스니펫과 여러 언어로 된 코드는 Sensitive Data Protection에서 InspectConfig를 사용하여 infoType 감지기 EMAIL_ADDRESS를 사용하는 스캔에서 '[e-mail]'과 일치하는 항목이 검색되지 않도록 지정하는 방법을 보여줍니다.

중요: 이 페이지의 코드를 사용하려면 먼저 Sensitive Data Protection 클라이언트를 설정해야 합니다. Sensitive Data Protection 클라이언트 설치 및 만들기에 대한 자세한 내용은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요. JSON을 Sensitive Data Protection REST 엔드포인트로 전송할 때는 클라이언트 라이브러리가 필요하지 않습니다.

C#

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

using System;
using System.Collections.Generic;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringWithExclusionDict
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, List<String> excludedMatchList)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteContentItem };

        var infoTypes = new string[] { "PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER" }.Select(it => new InfoType { Name = it });

        var exclusionRule = new ExclusionRule
        {
            MatchingType = MatchingType.FullMatch,
            Dictionary = new CustomInfoType.Types.Dictionary
            {
                WordList = new CustomInfoType.Types.Dictionary.Types.WordList
                {
                    Words = { excludedMatchList }
                }
            }
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "EMAIL_ADDRESS" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringWithExclusionDictionary inspects a string for sensitive data
// using exclusion dictionary, here the function omits a specific email address
// from an EMAIL_ADDRESS detector scan with an exclusion dictionary
func inspectStringWithExclusionDictionary(w io.Writer, projectID, textToInspect string, excludedMatchList []string) error {
	// projectID := "my-project-id"
	// textToInspect := "Some email addresses: [e-mail], [e-mail]"
	// excludedMatchList := []string{"[e-mail]"}

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "PHONE_NUMBER"},
		{Name: "EMAIL_ADDRESS"},
		{Name: "CREDIT_CARD_NUMBER"},
	}

	// Exclude matches from the specified excludedMatchList.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Dictionary{
			Dictionary: &dlppb.CustomInfoType_Dictionary{
				Source: &dlppb.CustomInfoType_Dictionary_WordList_{
					WordList: &dlppb.CustomInfoType_Dictionary_WordList{
						Words: excludedMatchList,
					},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_FULL_MATCH,
	}

	// Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "EMAIL_ADDRESS"},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		// Construct the configuration for the Inspect request, including the ruleSet.
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes:    infoTypes,
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary.WordList;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.Arrays;
import java.util.List;

public class InspectStringWithExclusionDict {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Some email addresses: [e-mail], [e-mail]";
    List<String> excludedMatchList = Arrays.asList("[e-mail]");
    inspectStringWithExclusionDict(projectId, textToInspect, excludedMatchList);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringWithExclusionDict(
      String projectId, String textToInspect, List<String> excludedMatchList) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName : new String[] {"PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Exclude matches from the specified excludedMatchList.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setMatchingType(MatchingType.MATCHING_TYPE_FULL_MATCH)
              .setDictionary(
                  Dictionary.newBuilder()
                      .setWordList(WordList.newBuilder().addAllWords(excludedMatchList)))
              .build();

      // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("EMAIL_ADDRESS"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Some email addresses: [e-mail], [e-mail]';

// The infoTypes of information to match
// const infoTypes = [{ name: 'EMAIL_ADDRESS' }];

// Words to exclude
// const excludedWords = ['[e-mail]'];

async function inspectStringWithExclusionDict() {
  // Specify the type and content to be inspected.
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Exclude matches from the specified excludedWords.
  const exclusionRule = {
    dictionary: {
      wordList: {
        words: excludedWords,
      },
    },
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
  };

  // Construct a ruleset that applies the exclusion rule to the specified infotype.
  const ruleSet = [
    {
      infoTypes: infoTypes,
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print Findings
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringWithExclusionDict();

PHP

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary\WordList;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, using exclusion dictionary
 * Omit a specific email address from an EMAIL_ADDRESS detector scan with an exclusion dictionary.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_with_exclusion_dict(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Some email addresses: [e-mail], [e-mail]'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $infotypes = [
        (new InfoType())->setName('PHONE_NUMBER'),
        (new InfoType())->setName('EMAIL_ADDRESS'),
        (new InfoType())->setName('CREDIT_CARD_NUMBER'),
    ];

    // Exclude matches from the specified excludedMatchList.
    $excludedMatchList = (new Dictionary())
        ->setWordList((new WordList())
            ->setWords(['[e-mail]']));
    $matchingType = MatchingType::MATCHING_TYPE_FULL_MATCH;
    $exclusionRule = (new ExclusionRule())
        ->setMatchingType($matchingType)
        ->setDictionary($excludedMatchList);

    // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
    $emailAddress = (new InfoType())
        ->setName('EMAIL_ADDRESS');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$emailAddress])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infotypes)
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

from typing import List

import google.cloud.dlp

def inspect_string_with_exclusion_dict(
    project: str,
    content_string: str,
    exclusion_list: List[str] = ["[e-mail]"],
) -> None:
    """Inspects the provided text, avoiding matches specified in the exclusion list

    Uses the Data Loss Prevention API to omit matches on EMAIL_ADDRESS if they are
    in the specified exclusion list.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        exclusion_list: The list of strings to ignore matches on

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "EMAIL_ADDRESS"}]

    # Construct a rule set that will only match on EMAIL_ADDRESS
    # if the match text is not in the exclusion list.
    rule_set = [
        {
            "info_types": info_types_to_locate,
            "rules": [
                {
                    "exclusion_rule": {
                        "dictionary": {"word_list": {"words": exclusion_list}},
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": info_types_to_locate,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

JSON과 함께 DLP API를 사용하는 데 대한 자세한 내용은 JSON 빠른 시작을 참조하세요.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"EMAIL_ADDRESS"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"EMAIL_ADDRESS"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "dictionary":{
                  "wordList":{
                    "words":[
                      "[e-mail]"
                    ]
                  }
                },
                "matchingType": "MATCHING_TYPE_FULL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

EMAIL_ADDRESS 감지기 스캔에서 특정 도메인으로 끝나는 이메일 주소 생략

다음 JSON 스니펫과 여러 언어로 된 코드는 Sensitive Data Protection에서 InspectConfig를 사용하여 infoType 감지기 EMAIL_ADDRESS를 사용하는 스캔에서 '@example.com'으로 끝나는 이메일 주소와 일치하는 항목이 검색되지 않도록 지정하는 방법을 보여줍니다.

중요: 이 페이지의 코드를 사용하려면 먼저 Sensitive Data Protection 클라이언트를 설정해야 합니다. Sensitive Data Protection 클라이언트 설치 및 만들기에 대한 자세한 내용은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요. JSON을 Sensitive Data Protection REST 엔드포인트로 전송할 때는 클라이언트 라이브러리가 필요하지 않습니다.

C#

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

using System;
using System.Collections.Generic;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringWithExclusionRegex
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, string excludedRegex)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteContentItem };

        var infoTypes = new string[] { "PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER" }.Select(it => new InfoType { Name = it });

        var exclusionRule = new ExclusionRule
        {
            MatchingType = MatchingType.FullMatch,
            Regex = new CustomInfoType.Types.Regex { Pattern = excludedRegex }
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "EMAIL_ADDRESS" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringWithExclusionRegex inspects a string excluding REGEX matches
// in this function specifically the function omits email addresses ending with a specific
// domain from EMAIL_ADDRESS detector scan.
func inspectStringWithExclusionRegex(w io.Writer, projectID, textToInspect, excludedRegex string) error {
	// projectID := "my-project-id"
	// textToInspect := "Some email addresses: [e-mail], [e-mail]"
	// excludedRegex := "[e-mail]"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "PHONE_NUMBER"},
		{Name: "EMAIL_ADDRESS"},
		{Name: "CREDIT_CARD_NUMBER"},
	}

	// Exclude matches from the specified excludedMatchList.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Regex{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: excludedRegex,
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_FULL_MATCH,
	}

	// Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "EMAIL_ADDRESS"},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes:    infoTypes,
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class InspectStringWithExclusionRegex {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Some email addresses: [e-mail], [e-mail]";
    String excludedRegex = "[e-mail]";
    inspectStringWithExclusionRegex(projectId, textToInspect, excludedRegex);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringWithExclusionRegex(
      String projectId, String textToInspect, String excludedRegex) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName : new String[] {"PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Exclude matches from the specified excludedMatchList.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setMatchingType(MatchingType.MATCHING_TYPE_FULL_MATCH)
              .setRegex(Regex.newBuilder().setPattern(excludedRegex))
              .build();

      // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("EMAIL_ADDRESS"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Some email addresses: [e-mail], [e-mail]';

// Exclusion Regex
// const exclusionRegex = '[e-mail]';

async function inspectStringMultipleRules() {
  // Specify the type and content to be inspected.
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Info Types for inspection
  const infoTypes = [{name: 'EMAIL_ADDRESS'}];

  // Construct a exclusion rule that uses a regex pattern
  const exclusionRule = {
    regex: {pattern: exclusionRegex},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
  };

  // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
  const ruleSet = [
    {
      infoTypes: infoTypes,
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringMultipleRules();

PHP

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string, excluding REGEX matches
 * Omit email addresses ending with a specific domain from an EMAIL_ADDRESS detector scan.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_with_exclusion_regex(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Some email addresses: [e-mail], [e-mail]'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $infotypes = [
        (new InfoType())->setName('PHONE_NUMBER'),
        (new InfoType())->setName('EMAIL_ADDRESS'),
        (new InfoType())->setName('CREDIT_CARD_NUMBER'),
    ];

    // Exclude matches from the specified excludedRegex.
    $excludedRegex = '[e-mail]';
    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_FULL_MATCH)
        ->setRegex((new Regex())
            ->setPattern($excludedRegex));

    // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([
            (new InfoType())
                ->setName('EMAIL_ADDRESS')
        ])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infotypes)
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import google.cloud.dlp

def inspect_string_with_exclusion_regex(
    project: str, content_string: str, exclusion_regex: str = "[e-mail]"
) -> None:
    """Inspects the provided text, avoiding matches specified in the exclusion regex

    Uses the Data Loss Prevention API to omit matches on EMAIL_ADDRESS if they match
    the specified exclusion regex.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        exclusion_regex: The regular expression to exclude matches on

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "EMAIL_ADDRESS"}]

    # Construct a rule set that will only match on EMAIL_ADDRESS
    # if the specified regex doesn't also match.
    rule_set = [
        {
            "info_types": info_types_to_locate,
            "rules": [
                {
                    "exclusion_rule": {
                        "regex": {"pattern": exclusion_regex},
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": info_types_to_locate,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

JSON과 함께 DLP API를 사용하는 데 대한 자세한 내용은 JSON 빠른 시작을 참조하세요.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"EMAIL_ADDRESS"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"EMAIL_ADDRESS"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "regex":{
                  "pattern":"[e-mail]"
                },
                "matchingType": "MATCHING_TYPE_FULL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

하위 문자열 'TEST'가 포함된 스캔 일치 항목 생략

다음 JSON 스니펫과 여러 언어로 된 코드에서는 Sensitive Data Protection에서 InspectConfig를 사용하여 지정된 infoType 목록에서 토큰 'TEST'가 포함된 발견 항목을 제외하도록 지정하는 방법을 보여줍니다.

'TEST'는 하위 문자열이 아닌 토큰으로 일치하므로 '[e-mail]'과 같은 항목은 일치하지만 '[e-mail]'과는 일치하지 않습니다. 하위 문자열 일치가 필요한 경우 사전 대신 제외 규칙에서 정규식을 사용합니다.

중요: 이 페이지의 코드를 사용하려면 먼저 Sensitive Data Protection 클라이언트를 설정해야 합니다. Sensitive Data Protection 클라이언트 설치 및 만들기에 대한 자세한 내용은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요. JSON을 Sensitive Data Protection REST 엔드포인트로 전송할 때는 클라이언트 라이브러리가 필요하지 않습니다.

C#

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

using System;
using System.Collections.Generic;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringWithExclusionDictSubstring
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, List<String> excludedSubstringList)
    {
        var dlp = DlpServiceClient.Create();

        var byteItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteItem };

        var infoTypes = new string[]
        {
            "EMAIL_ADDRESS",
            "DOMAIN_NAME",
            "PHONE_NUMBER",
            "PERSON_NAME"
        }.Select(it => new InfoType { Name = it });

        var exclusionRule = new ExclusionRule
        {
            MatchingType = MatchingType.PartialMatch,
            Dictionary = new CustomInfoType.Types.Dictionary
            {
                WordList = new CustomInfoType.Types.Dictionary.Types.WordList
                {
                    Words = { excludedSubstringList }
                }
            }
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { infoTypes },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringWithExclusionDictSubstring inspects a string
// with an exclusion dictionary substring
func inspectStringWithExclusionDictSubstring(w io.Writer, projectID, textToInspect string, excludedSubString []string) error {
	// projectID := "my-project-id"
	// textToInspect := "Some email addresses: [e-mail], [e-mail]"
	// excludedSubString := []string{"TEST"}

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "EMAIL_ADDRESS"},
		{Name: "DOMAIN_NAME"},
		{Name: "PHONE_NUMBER"},
		{Name: "PERSON_NAME"},
	}

	// Exclude partial matches from the specified excludedSubstringList.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Dictionary{
			Dictionary: &dlppb.CustomInfoType_Dictionary{
				Source: &dlppb.CustomInfoType_Dictionary_WordList_{
					WordList: &dlppb.CustomInfoType_Dictionary_WordList{
						Words: excludedSubString,
					},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleSet that applies the exclusion rule to the EMAIL_ADDRESSES infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: infoTypes,
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes:    infoTypes,
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary.WordList;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.Arrays;
import java.util.List;

public class InspectStringWithExclusionDictSubstring {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Some email addresses: [e-mail], [e-mail]";
    List<String> excludedSubstringList = Arrays.asList("TEST");
    inspectStringWithExclusionDictSubstring(projectId, textToInspect, excludedSubstringList);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringWithExclusionDictSubstring(
      String projectId, String textToInspect, List<String> excludedSubstringList)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName :
          new String[] {"EMAIL_ADDRESS", "DOMAIN_NAME", "PHONE_NUMBER", "PERSON_NAME"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Exclude partial matches from the specified excludedSubstringList.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .setDictionary(
                  Dictionary.newBuilder()
                      .setWordList(WordList.newBuilder().addAllWords(excludedSubstringList)))
              .build();

      // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addAllInfoTypes(infoTypes)
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Some email addresses: [e-mail], [e-mail]';

// List of substrings to be used for exclusion
// const excludedSubstringList = ['Test'];

async function inspectStringExclusionDictSubstr() {
  // Specify the type and content to be inspected.
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Specify the type of info the inspection will look for.
  // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
  const infoTypes = [
    {name: 'EMAIL_ADDRESS'},
    {name: 'DOMAIN_NAME'},
    {name: 'PHONE_NUMBER'},
    {name: 'PERSON_NAME'},
  ];

  // Exclude partial matches from the specified excludedSubstringList.
  const exclusionRule = {
    dictionary: {wordList: {words: excludedSubstringList}},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
  const ruleSet = [
    {
      infoTypes: infoTypes,
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringExclusionDictSubstr();

PHP

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary\WordList;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string with an exclusion dictionary substring
 * Omit scan matches that include the substring "TEST".
 *
 * @param string $projectId                 The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect             The string to inspect.
 * @param array  $excludedSubStringArray    The sub string to excluded.
 */
function inspect_string_with_exclusion_dict_substring(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Some email addresses: [e-mail], [e-mail]',
    array  $excludedSubStringArray = ['Test']
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $infotypes = [
        (new InfoType())->setName('PHONE_NUMBER'),
        (new InfoType())->setName('EMAIL_ADDRESS'),
        (new InfoType())->setName('DOMAIN_NAME'),
        (new InfoType())->setName('PERSON_NAME'),
    ];

    // Exclude matches from the specified excludedSubstringList.
    $excludedSubstringList = (new Dictionary())
        ->setWordList((new WordList())
            ->setWords($excludedSubStringArray));

    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setDictionary($excludedSubstringList);

    // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes($infotypes)
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infotypes)
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

from typing import List

import google.cloud.dlp

def inspect_string_with_exclusion_dict_substring(
    project: str, content_string: str, exclusion_list: List[str] = ["TEST"]
) -> None:
    """Inspects the provided text, avoiding matches that contain excluded tokens

    Uses the Data Loss Prevention API to omit matches if they include tokens
    in the specified exclusion list.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        exclusion_list: The list of strings to ignore partial matches on

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "EMAIL_ADDRESS"}, {"name": "DOMAIN_NAME"}]

    # Construct a rule set that will only match if the match text does not
    # contains tokens from the exclusion list.
    rule_set = [
        {
            "info_types": info_types_to_locate,
            "rules": [
                {
                    "exclusion_rule": {
                        "dictionary": {"word_list": {"words": exclusion_list}},
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": info_types_to_locate,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

JSON과 함께 DLP API를 사용하는 데 대한 자세한 내용은 JSON 빠른 시작을 참조하세요.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"EMAIL_ADDRESS"
        },
        {
          "name":"DOMAIN_NAME"
        },
        {
          "name":"PHONE_NUMBER"
        },
        {
          "name":"PERSON_NAME"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"EMAIL_ADDRESS"
            },
            {
              "name":"DOMAIN_NAME"
            },
            {
              "name":"PHONE_NUMBER"
            },
            {
              "name":"PERSON_NAME"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "dictionary":{
                  "wordList":{
                    "words":[
                      "TEST"
                    ]
                  }
                },
                "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

커스텀 infoType 감지기 스캔에서 하위 문자열 'Jimmy'가 포함된 스캔 일치 항목 생략

다음 JSON 스니펫과 여러 언어로 된 코드는 Sensitive Data Protection에서 InspectConfig를 사용하여 지정된 커스텀 정규식 감지기를 사용하는 스캔에서 'Jimmy' 이름과 가 일치하는 항목을 검색하지 않도록 지정하는 방법을 보여줍니다.

중요: 이 페이지의 코드를 사용하려면 먼저 Sensitive Data Protection 클라이언트를 설정해야 합니다. Sensitive Data Protection 클라이언트 설치 및 만들기에 대한 자세한 내용은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요. JSON을 Sensitive Data Protection REST 엔드포인트로 전송할 때는 클라이언트 라이브러리가 필요하지 않습니다.

C#

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

using System;
using System.Collections.Generic;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringCustomExcludingSubstring
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, string customDetectorPattern, List<String> excludedSubstringList)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteContentItem };

        var infoType = new InfoType
        {
            Name = "CUSTOM_NAME_DETECTOR"
        };
        var customInfoType = new CustomInfoType
        {
            InfoType = infoType,
            Regex = new CustomInfoType.Types.Regex { Pattern = customDetectorPattern }
        };

        var exclusionRule = new ExclusionRule
        {
            MatchingType = MatchingType.PartialMatch,
            Dictionary = new CustomInfoType.Types.Dictionary
            {
                WordList = new CustomInfoType.Types.Dictionary.Types.WordList
                {
                    Words = { excludedSubstringList }
                }
            }
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { infoType },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            CustomInfoTypes = { customInfoType },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringCustomExcludingSubstring inspects a string for sensitive data, excluding a custom substring
func inspectStringCustomExcludingSubstring(w io.Writer, projectID, textToInspect, customDetectorPattern string, excludedSubstringList []string) error {
	// projectId := "your-project-id"
	// textToInspect := "Name: Doe, John. Name: Example, Jimmy"
	// customDetectorPattern := "[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}"
	// excludedSubstringList := []string{"Jimmy"}

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	infoType := &dlppb.InfoType{
		Name: "CUSTOM_NAME_DETECTOR",
	}

	customInfotype := &dlppb.CustomInfoType{
		InfoType: infoType,
		Type: &dlppb.CustomInfoType_Regex_{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: customDetectorPattern,
			},
		},
	}

	// Exclude partial matches from the specified excludedSubstringList.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Dictionary{
			Dictionary: &dlppb.CustomInfoType_Dictionary{
				Source: &dlppb.CustomInfoType_Dictionary_WordList_{
					WordList: &dlppb.CustomInfoType_Dictionary_WordList{
						Words: excludedSubstringList,
					},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			infoType,
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			CustomInfoTypes: []*dlppb.CustomInfoType{
				customInfotype,
			},
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary.WordList;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.Arrays;
import java.util.List;

public class InspectStringCustomExcludingSubstring {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Name: Doe, John. Name: Example, Jimmy";
    String customDetectorPattern = "[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}";
    List<String> excludedSubstringList = Arrays.asList("Jimmy");
    inspectStringCustomExcludingSubstring(
        projectId, textToInspect, customDetectorPattern, excludedSubstringList);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringCustomExcludingSubstring(
      String projectId,
      String textToInspect,
      String customDetectorPattern,
      List<String> excludedSubstringList)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      InfoType infoType = InfoType.newBuilder().setName("CUSTOM_NAME_DETECTOR").build();
      CustomInfoType customInfoType =
          CustomInfoType.newBuilder()
              .setInfoType(infoType)
              .setRegex(Regex.newBuilder().setPattern(customDetectorPattern))
              .build();

      // Exclude partial matches from the specified excludedSubstringList.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .setDictionary(
                  Dictionary.newBuilder()
                      .setWordList(WordList.newBuilder().addAllWords(excludedSubstringList)))
              .build();

      // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(infoType)
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addCustomInfoTypes(customInfoType)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Name: Doe, John. Name: Example, Jimmy';

// Words to exclude
// const excludedWords = ['Jimmy'];

async function inspectStringCustomExclusionDict() {
  // Specify the content to be inspected.
  const item = {value: string};

  // Specify the type of info the inspection will look for.
  const customInfoTypes = [
    {
      infoType: {name: 'CUSTOM_NAME_DETECTOR'},
      regex: {pattern: '[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}'},
    },
  ];

  // Exclude partial matches from the specified excludedSubstringList.
  const exclusionRUle = {
    dictionary: {wordList: {words: excludedWords}},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // Construct a rule set that will only match if the match text does not
  // contains tokens from the exclusion list.
  const ruleSet = [
    {
      infoTypes: [{name: 'CUSTOM_NAME_DETECTOR'}],
      rules: [
        {
          exclusionRule: exclusionRUle,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    customInfoTypes: customInfoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringCustomExclusionDict();

PHP

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary\WordList;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, excluding a custom substring
 * Illustrates how to use an InspectConfig to instruct Cloud DLP to avoid matching on the name "Jimmy" in a scan that uses the specified custom regular expression detector.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_custom_excluding_substring(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Name: Doe, John. Name: Example, Jimmy'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();
    $customDetectorPattern = '[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}';

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $customerNameDetector = (new InfoType())
        ->setName('CUSTOM_NAME_DETECTOR');
    $customInfoType = (new CustomInfoType())
        ->setInfoType($customerNameDetector)
        ->setRegex((new Regex())
            ->setPattern($customDetectorPattern));

    // Exclude partial matches from the specified excludedSubstringList.
    $excludedSubstringList = (new Dictionary())
        ->setWordList((new WordList())
            ->setWords(['Jimmy']));

    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setDictionary($excludedSubstringList);

    // Construct a ruleset that applies the exclusion rule.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$customerNameDetector])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setCustomInfoTypes([$customInfoType])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

from typing import List

import google.cloud.dlp

def inspect_string_custom_excluding_substring(
    project: str, content_string: str, exclusion_list: List[str] = ["jimmy"]
) -> None:
    """Inspects the provided text with a custom detector, avoiding matches on specific tokens

    Uses the Data Loss Prevention API to omit matches on a custom detector
    if they include tokens in the specified exclusion list.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        exclusion_list: The list of strings to ignore matches on

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a custom regex detector for names
    custom_info_types = [
        {
            "info_type": {"name": "CUSTOM_NAME_DETECTOR"},
            "regex": {"pattern": "[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}"},
        }
    ]

    # Construct a rule set that will only match if the match text does not
    # contains tokens from the exclusion list.
    rule_set = [
        {
            "info_types": [{"name": "CUSTOM_NAME_DETECTOR"}],
            "rules": [
                {
                    "exclusion_rule": {
                        "dictionary": {"word_list": {"words": exclusion_list}},
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "custom_info_types": custom_info_types,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

JSON과 함께 DLP API를 사용하는 데 대한 자세한 내용은 JSON 빠른 시작을 참조하세요.

...
    "inspectConfig":{
      "customInfoTypes":[
        {
          "infoType":{
            "name":"CUSTOM_NAME_DETECTOR"
          },
          "regex":{
            "pattern":"[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}"
          }
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"CUSTOM_NAME_DETECTOR"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "dictionary":{
                  "wordList":{
                    "words":[
                      "Jimmy"
                    ]
                  }
                },
                "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

PERSON_NAME 감지기 스캔에서 커스텀 감지기와 겹치는 스캔 일치 항목 생략

이 시나리오에서는 사용자가 PERSON_NAME 기본 제공 감지기를 사용한 Sensitive Data Protection 스캔의 일치 항목이 스니펫의 첫 번째 부분에 정의된 커스텀 정규식 감지기를 사용한 스캔에서도 일치할 경우 검색하지 않습니다.

다음 JSON 스니펫과 여러 언어로 된 코드는 InspectConfig에 커스텀 정규 표현식 감지기와 제외 규칙을 모두 지정합니다. 커스텀 정규 표현식 감지기는 결과에서 제외할 이름을 지정합니다. 제외 규칙은 PERSON_NAME 스캔에서 반환된 결과가 커스텀 정규 표현식 감지기에서도 일치하는 경우 해당 결과가 생략되도록 지정합니다. 여기서 VIP_DETECTOR에는 자체적으로 결과를 생성하지 않도록 EXCLUSION_TYPE_EXCLUDE가 지정되어 있습니다. PERSON_NAME 감지기에 의해 생성되는 결과에만 영향을 미칩니다.

중요: 이 페이지의 코드를 사용하려면 먼저 Sensitive Data Protection 클라이언트를 설정해야 합니다. Sensitive Data Protection 클라이언트 설치 및 만들기에 대한 자세한 내용은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요. JSON을 Sensitive Data Protection REST 엔드포인트로 전송할 때는 클라이언트 라이브러리가 필요하지 않습니다.

C#

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

using System;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectStringCustomOmitOverlap
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect)
    {
        var dlp = DlpServiceClient.Create();

        var byteItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteItem };

        var customInfoType = new CustomInfoType
        {
            InfoType = new InfoType { Name = "VIP_DETECTOR" },
            Regex = new CustomInfoType.Types.Regex { Pattern = "Larry Page|Sergey Brin" },
            ExclusionType = ExclusionType.Exclude
        };

        var exclusionRule = new ExclusionRule
        {
            ExcludeInfoTypes = new ExcludeInfoTypes { InfoTypes = { customInfoType.InfoType } },
            MatchingType = MatchingType.FullMatch
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "PERSON_NAME" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            InfoTypes = { new InfoType { Name = "PERSON_NAME" } },
            CustomInfoTypes = { customInfoType },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringCustomOmitOverlap inspects a string for sensitive data with omitting custom matches
func inspectStringCustomOmitOverlap(w io.Writer, projectID, textToInspect, customInfoTypeName, infoTypeName, regex string) error {
	// projectID := "my-project-id"
	// textToInspect := "Name: Jane Doe. Name: Larry Page."
	// customInfoTypeName := "VIP_DETECTOR"
	// infoTypeName := "PERSON_NAME"
	// regex := "Larry Page|Sergey Brin"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}
	// Construct the custom infoType.
	customInfotype := &dlppb.CustomInfoType{
		InfoType: &dlppb.InfoType{
			Name: customInfoTypeName,
		},
		Type: &dlppb.CustomInfoType_Regex_{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: regex,
			},
		},
		ExclusionType: dlppb.CustomInfoType_EXCLUSION_TYPE_EXCLUDE,
	}

	// Exclude matches that also match the custom infoType.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_ExcludeInfoTypes{
			ExcludeInfoTypes: &dlppb.ExcludeInfoTypes{
				InfoTypes: []*dlppb.InfoType{
					customInfotype.GetInfoType(),
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_FULL_MATCH,
	}

	// Construct a ruleSet that applies the exclusion rule to the PERSON_NAME infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: infoTypeName},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the configuration for the Inspect request, including the ruleSet.
	config := &dlppb.InspectConfig{
		InfoTypes: []*dlppb.InfoType{
			{Name: infoTypeName},
		},
		CustomInfoTypes: []*dlppb.CustomInfoType{
			customInfotype,
		},
		IncludeQuote: true,
		RuleSet: []*dlppb.InspectionRuleSet{
			ruleSet,
		},
	}

	// Create a configured request.
	req := &dlppb.InspectContentRequest{
		Parent:        fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:          contentItem,
		InspectConfig: config,
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Parse the response and process results
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.CustomInfoType.ExclusionType;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.ExcludeInfoTypes;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;

public class InspectStringCustomOmitOverlap {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Name: Jane Doe. Name: Larry Page.";
    inspectStringCustomOmitOverlap(projectId, textToInspect);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringCustomOmitOverlap(String projectId, String textToInspect)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Construct the custom infotype.
      CustomInfoType customInfoType =
          CustomInfoType.newBuilder()
              .setInfoType(InfoType.newBuilder().setName("VIP_DETECTOR"))
              .setRegex(Regex.newBuilder().setPattern("Larry Page|Sergey Brin"))
              .setExclusionType(ExclusionType.EXCLUSION_TYPE_EXCLUDE)
              .build();

      // Exclude matches that also match the custom infotype.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setExcludeInfoTypes(
                  ExcludeInfoTypes.newBuilder().addInfoTypes(customInfoType.getInfoType()))
              .setMatchingType(MatchingType.MATCHING_TYPE_FULL_MATCH)
              .build();

      // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .addCustomInfoTypes(customInfoType)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Name: Jane Doe. Name: Larry Page.';

async function inspectStringCustomOmitOverlap() {
  // Construct item to inspect
  const item = {value: string};

  // Construct a custom regex detector for names
  const customInfoTypes = [
    {
      infoType: {name: 'VIP_DETECTOR'},
      regex: {pattern: 'Larry Page|Sergey Brin'},
      exclusionType:
        DLP.protos.google.privacy.dlp.v2.CustomInfoType.ExclusionType
          .EXCLUSION_TYPE_EXCLUDE,
    },
  ];

  // Construct a exclusion rule
  const exclusionRule = {
    excludeInfoTypes: {
      infoTypes: [{name: 'VIP_DETECTOR'}],
    },
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
  };

  // Construct a rule set that will only match if the match text does not
  // contains Info type matches.
  const ruleSet = [
    {
      infoTypes: [{name: 'PERSON_NAME'}],
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the inspect configuration
  const inspectConfig = {
    infoTypes: [{name: 'PERSON_NAME'}],
    customInfoTypes: customInfoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Combine configurations into a request for the service.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);

  // Print Findings
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringCustomOmitOverlap();

PHP

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType;
use Google\Cloud\Dlp\V2\CustomInfoType\ExclusionType;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\ExcludeInfoTypes;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, omitting custom matches
 * Omit scan matches from a PERSON_NAME detector scan that overlap with a custom detector.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_custom_omit_overlap(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Name: Jane Doe. Name: Larry Page.'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $vipDetector = (new InfoType())
        ->setName('VIP_DETECTOR');
    $pattern = 'Larry Page|Sergey Brin';
    $customInfoType = (new CustomInfoType())
        ->setInfoType($vipDetector)
        ->setRegex((new Regex())
            ->setPattern($pattern))
        ->setExclusionType(ExclusionType::EXCLUSION_TYPE_EXCLUDE);

    // Exclude matches that also match the custom infotype.
    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_FULL_MATCH)
        ->setExcludeInfoTypes((new ExcludeInfoTypes())
                ->setInfoTypes([$customInfoType->getInfoType()])
        );

    // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
    $personName = (new InfoType())
        ->setName('PERSON_NAME');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$personName])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes([$personName])
        ->setCustomInfoTypes([$customInfoType])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import google.cloud.dlp

def inspect_string_custom_omit_overlap(project: str, content_string: str) -> None:
    """Matches PERSON_NAME and a custom detector,
    but if they overlap only matches the custom detector

    Uses the Data Loss Prevention API to omit matches on a built-in detector
    if they overlap with matches from a custom detector

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a custom regex detector for names
    custom_info_types = [
        {
            "info_type": {"name": "VIP_DETECTOR"},
            "regex": {"pattern": "Larry Page|Sergey Brin"},
            "exclusion_type": google.cloud.dlp_v2.CustomInfoType.ExclusionType.EXCLUSION_TYPE_EXCLUDE,
        }
    ]

    # Construct a rule set that will exclude PERSON_NAME matches
    # that overlap with VIP_DETECTOR matches
    rule_set = [
        {
            "info_types": [{"name": "PERSON_NAME"}],
            "rules": [
                {
                    "exclusion_rule": {
                        "exclude_info_types": {
                            "info_types": [{"name": "VIP_DETECTOR"}]
                        },
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": [{"name": "PERSON_NAME"}],
        "custom_info_types": custom_info_types,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

JSON과 함께 DLP API를 사용하는 데 대한 자세한 내용은 JSON 빠른 시작을 참조하세요.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"PERSON_NAME"
        }
      ],
      "customInfoTypes":[
        {
          "infoType":{
            "name":"VIP_DETECTOR"
          },
          "regex":{
            "pattern":"Dana Williams|Quinn Garcia"
          },
          "exclusionType":"EXCLUSION_TYPE_EXCLUDE"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"PERSON_NAME"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "excludeInfoTypes":{
                  "infoTypes":[
                    {
                      "name":"VIP_DETECTOR"
                    }
                  ]
                },
                "matchingType": "MATCHING_TYPE_FULL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

PERSON_NAME 감지기의 일치 항목이 EMAIL_ADDRESS 감지기에서도 일치하는 경우 생략

다음 JSON 스니펫과 여러 언어로 된 코드는 Sensitive Data Protection에서 InspectConfig를 사용하여 EMAIL_ADDRESS 감지기의 일치 항목이 PERSON_NAME 감지기의 일치 항목과 중복될 때는 일치 항목을 하나만 반환하도록 지정합니다. 이는 '[e-mail]'과 같은 이메일 주소가 PERSON_NAME 감지기 및 EMAIL_ADDRESS 감지기에서 모두 일치하는 상황을 피하기 위함입니다.

중요: 이 페이지의 코드를 사용하려면 먼저 Sensitive Data Protection 클라이언트를 설정해야 합니다. Sensitive Data Protection 클라이언트 설치 및 만들기에 대한 자세한 내용은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요. JSON을 Sensitive Data Protection REST 엔드포인트로 전송할 때는 클라이언트 라이브러리가 필요하지 않습니다.

C#

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

using System;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringOmitOverlap
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect)
    {
        // Initialize client that will be used to send requests. This client only needs to be created
        // once, and can be reused for multiple requests. After completing all of your requests, call
        // the "close" method on the client to safely clean up any remaining background resources.
        var dlp = DlpServiceClient.Create();

        // Specify the type and content to be inspected.
        var byteItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };
        var contentItem = new ContentItem { ByteItem = byteItem };

        // Specify the type of info the inspection will look for.
        // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
        var infoTypes = new string[] { "PERSON_NAME", "EMAIL_ADDRESS" }.Select(it => new InfoType { Name = it });

        // Exclude EMAIL_ADDRESS matches
        var exclusionRule = new ExclusionRule
        {
            ExcludeInfoTypes = new ExcludeInfoTypes { InfoTypes = { new InfoType { Name = "EMAIL_ADDRESS" } } },
            MatchingType = MatchingType.PartialMatch
        };

        // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
        // If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
        // be excluded.
        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "PERSON_NAME" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        // Construct the configuration for the Inspect request, including the ruleset.
        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        // Construct the Inspect request to be sent by the client.
        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        // Use the client to send the API request.
        var response = dlp.InspectContent(request);

        // Parse the response and process results
        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringOmitOverlap inspects a string for sensitive data and
// omitting overlapping matches on person and email
func inspectStringOmitOverlap(w io.Writer, projectID, textToInspect string) error {
	// projectID := "my-project-id"
	// textToInspect := "[e-mail]"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "PERSON_NAME"},
		{Name: "EMAIL_ADDRESS"},
	}

	// Exclude EMAIL_ADDRESS matches
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_ExcludeInfoTypes{
			ExcludeInfoTypes: &dlppb.ExcludeInfoTypes{
				InfoTypes: []*dlppb.InfoType{
					{Name: "EMAIL_ADDRESS"},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleSet that applies the exclusion rule to the PERSON_NAME infoType.
	// If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
	// be excluded.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "PERSON_NAME"},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes:    infoTypes,
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.ExcludeInfoTypes;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class InspectStringOmitOverlap {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "[e-mail]";
    inspectStringOmitOverlap(projectId, textToInspect);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringOmitOverlap(String projectId, String textToInspect)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName : new String[] {"PERSON_NAME", "EMAIL_ADDRESS"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Exclude EMAIL_ADDRESS matches
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setExcludeInfoTypes(
                  ExcludeInfoTypes.newBuilder()
                      .addInfoTypes(InfoType.newBuilder().setName("EMAIL_ADDRESS")))
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .build();

      // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
      // If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
      // be excluded.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = '[e-mail]';

async function inspectStringWithoutOverlapPersonEmail() {
  // Construct item to inspect
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Specify the type of info the inspection will look for.
  const infoTypes = [{name: 'PERSON_NAME'}, {name: 'EMAIL_ADDRESS'}];

  // Exclude EMAIL_ADDRESS matches
  const exclusionRule = {
    excludeInfoTypes: {
      infoTypes: [{name: 'EMAIL_ADDRESS'}],
    },
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
  // If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
  // be excluded.
  const ruleSet = [
    {
      infoTypes: [{name: 'PERSON_NAME'}],
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);

  // Print Findings
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringWithoutOverlapPersonEmail();

PHP

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\ExcludeInfoTypes;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, omitting overlapping matches on person and email
 * Omit matches on a PERSON_NAME detector if also matched by an EMAIL_ADDRESS detector.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_omit_overlap(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = '[e-mail] is an email.'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $personName = (new InfoType())
        ->setName('PERSON_NAME');
    $emailAddress = (new InfoType())
        ->setName('EMAIL_ADDRESS');
    $infoTypes = [$personName, $emailAddress];

    // Exclude EMAIL_ADDRESS matches
    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setExcludeInfoTypes((new ExcludeInfoTypes())
                ->setInfoTypes([$emailAddress])
        );

    // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
    // If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
    // be excluded.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$personName])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infoTypes)
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import google.cloud.dlp

def inspect_string_omit_overlap(
    project: str,
    content_string: str,
) -> None:
    """Matches PERSON_NAME and EMAIL_ADDRESS, but not both.

    Uses the Data Loss Prevention API omit matches on PERSON_NAME if the
    EMAIL_ADDRESS detector also matches.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "PERSON_NAME"}, {"name": "EMAIL_ADDRESS"}]

    # Construct the configuration dictionary that will only match on PERSON_NAME
    # if the EMAIL_ADDRESS doesn't also match. This configuration helps reduce
    # the total number of findings when there is a large overlap between different
    # infoTypes.
    inspect_config = {
        "info_types": info_types_to_locate,
        "rule_set": [
            {
                "info_types": [{"name": "PERSON_NAME"}],
                "rules": [
                    {
                        "exclusion_rule": {
                            "exclude_info_types": {
                                "info_types": [{"name": "EMAIL_ADDRESS"}]
                            },
                            "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
                        }
                    }
                ],
            }
        ],
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

JSON과 함께 DLP API를 사용하는 데 대한 자세한 내용은 JSON 빠른 시작을 참조하세요.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"PERSON_NAME"
        },
        {
          "name":"EMAIL_ADDRESS"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"PERSON_NAME"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "excludeInfoTypes":{
                  "infoTypes":[
                    {
                      "name":"EMAIL_ADDRESS"
                    }
                  ]
                },
                "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

DOMAIN_NAME 감지기 스캔의 이메일 주소에 포함된 도메인 이름에 대한 일치 항목 생략

다음 JSON 스니펫과 여러 언어로 된 코드는 Sensitive Data Protection에서 InspectConfig를 사용하여 EMAIL_ADDRESS 감지기 스캔의 일치 항목이 DOMAIN_NAME 감지기 스캔의 일치 항목과 중복되지 않는 경우 전자 감지기 스캔의 일치 항목만 반환하도록 지정합니다. 이 시나리오에서 주 스캔은 DOMAIN_NAME 감지기의 스캔입니다. 사용자는 도메인 이름이 이메일 주소에 사용된 경우 이 도메인 이름 일치 항목이 결과에 반환되는 것을 원하지 않습니다.

중요: 이 페이지의 코드를 사용하려면 먼저 Sensitive Data Protection 클라이언트를 설정해야 합니다. Sensitive Data Protection 클라이언트 설치 및 만들기에 대한 자세한 내용은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요. JSON을 Sensitive Data Protection REST 엔드포인트로 전송할 때는 클라이언트 라이브러리가 필요하지 않습니다.

C#

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectStringWithoutOverlap
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect)
    {
        // Initialize client that will be used to send requests. This client only needs to be created
        // once, and can be reused for multiple requests. After completing all of your requests, call
        // the "close" method on the client to safely clean up any remaining background resources.
        var dlp = DlpServiceClient.Create();

        // Specify the type and content to be inspected.
        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };
        var contentItem = new ContentItem
        {
            ByteItem = byteContentItem
        };

        // Specify the type of info the inspection will look for.
        // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
        var infoTypes = new string[] { "DOMAIN_NAME", "EMAIL_ADDRESS" }.Select(it => new InfoType { Name = it });

        // Define a custom info type to exclude email addresses
        var customInfoType = new CustomInfoType
        {
            InfoType = new InfoType { Name = "EMAIL_ADDRESS" },
            ExclusionType = ExclusionType.Exclude
        };

        // Exclude EMAIL_ADDRESS matches
        var exclusionRule = new ExclusionRule
        {
            ExcludeInfoTypes = new ExcludeInfoTypes
            {
                InfoTypes = { new InfoType { Name = "EMAIL_ADDRESS" } }
            },
            MatchingType = MatchingType.PartialMatch
        };

        // Construct a ruleset that applies the exclusion rule to the DOMAIN_NAME infotype.
        // If a DOMAIN_NAME match is part of an EMAIL_ADDRESS match, the DOMAIN_NAME match will
        // be excluded.
        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "DOMAIN_NAME" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        // Construct the configuration for the Inspect request, including the ruleset.
        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            CustomInfoTypes = { customInfoType },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        // Construct the Inspect request to be sent by the client.
        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        // Use the client to send the API request.
        var response = dlp.InspectContent(request);

        return response;
    }
}

Go

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringWithoutOverlap inspects a string for sensitive data
// and omit overlapping matches on domain and email
func inspectStringWithoutOverlap(w io.Writer, projectID, textToInspect string) error {
	// projectID := "my-project-id"
	// textToInspect := "example.com is a domain, [e-mail] is an email."

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "DOMAIN_NAME"},
		{Name: "EMAIL_ADDRESS"},
	}

	// Define a custom info type to exclude email addresses
	customInfotype := &dlppb.CustomInfoType{
		InfoType: &dlppb.InfoType{
			Name: "EMAIL_ADDRESS",
		},
		ExclusionType: dlppb.CustomInfoType_EXCLUSION_TYPE_EXCLUDE,
	}

	// Exclude EMAIL_ADDRESS matches
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_ExcludeInfoTypes{
			ExcludeInfoTypes: &dlppb.ExcludeInfoTypes{
				InfoTypes: []*dlppb.InfoType{
					{Name: "EMAIL_ADDRESS"},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleSet that applies the exclusion rule to the DOMAIN_NAME infoType.
	// If a DOMAIN_NAME match is part of an EMAIL_ADDRESS match, the DOMAIN_NAME match will
	// be excluded.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "DOMAIN_NAME"},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		// Construct the Inspect request to be sent by the client.
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes: infoTypes,
			CustomInfoTypes: []*dlppb.CustomInfoType{
				customInfotype,
			},
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.CustomInfoType.ExclusionType;
import com.google.privacy.dlp.v2.ExcludeInfoTypes;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class InspectStringWithoutOverlap {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "example.com is a domain, [e-mail] is an email.";
    inspectStringWithoutOverlap(projectId, textToInspect);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringWithoutOverlap(String projectId, String textToInspect)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName : new String[] {"DOMAIN_NAME", "EMAIL_ADDRESS"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Define a custom info type to exclude email addresses
      CustomInfoType customInfoType =
          CustomInfoType.newBuilder()
              .setInfoType(InfoType.newBuilder().setName("EMAIL_ADDRESS"))
              .setExclusionType(ExclusionType.EXCLUSION_TYPE_EXCLUDE)
              .build();

      // Exclude EMAIL_ADDRESS matches
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setExcludeInfoTypes(
                  ExcludeInfoTypes.newBuilder()
                      .addInfoTypes(InfoType.newBuilder().setName("EMAIL_ADDRESS")))
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .build();

      // Construct a ruleset that applies the exclusion rule to the DOMAIN_NAME infotype.
      // If a DOMAIN_NAME match is part of an EMAIL_ADDRESS match, the DOMAIN_NAME match will
      // be excluded.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("DOMAIN_NAME"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .addCustomInfoTypes(customInfoType)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'example.com is a domain, [e-mail] is an email.';

async function inspectStringWithoutOverlap() {
  // Construct item to inspect
  const item = {value: string};

  // The infoTypes of information to match
  const infoTypes = [{name: 'DOMAIN_NAME'}, {name: 'EMAIL_ADDRESS'}];

  // Define a custom info type to exclude email addresses
  const customInfoTypes = [
    {
      infoType: {name: 'EMAIL_ADDRESS'},
      exclusionType:
        DLP.protos.google.privacy.dlp.v2.CustomInfoType.ExclusionType
          .EXCLUSION_TYPE_EXCLUDE,
    },
  ];

  // Construct a exclusion rule
  const exclusionRule = {
    excludeInfoTypes: {
      infoTypes: [{name: 'EMAIL_ADDRESS'}],
    },
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // Construct a rule set with exclusions
  const ruleSet = [
    {
      infoTypes: [{name: 'DOMAIN_NAME'}],
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the inspect configuration
  const inspectConfig = {
    infoTypes: infoTypes,
    customInfoTypes: customInfoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Combine configurations into a request for the service.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);

  // Print Findings
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringWithoutOverlap();

PHP

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType;
use Google\Cloud\Dlp\V2\CustomInfoType\ExclusionType;
use Google\Cloud\Dlp\V2\ExcludeInfoTypes;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, omitting overlapping matches on domain and email
 * Omit matches on domain names that are part of email addresses in a DOMAIN_NAME detector scan.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_without_overlap(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'example.com is a domain, [e-mail] is an email.'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $domainName = (new InfoType())
        ->setName('DOMAIN_NAME');
    $emailAddress = (new InfoType())
        ->setName('EMAIL_ADDRESS');
    $infoTypes = [$domainName, $emailAddress];

    // Define a custom info type to exclude email addresses
    $customInfoType = (new CustomInfoType())
        ->setInfoType($emailAddress)
        ->setExclusionType(ExclusionType::EXCLUSION_TYPE_EXCLUDE);

    // Exclude EMAIL_ADDRESS matches
    $matchingType = MatchingType::MATCHING_TYPE_PARTIAL_MATCH;

    $exclusionRule = (new ExclusionRule())
        ->setMatchingType($matchingType)
        ->setExcludeInfoTypes((new ExcludeInfoTypes())
            ->setInfoTypes([$customInfoType->getInfoType()])
        );

    // Construct a ruleset that applies the exclusion rule to the DOMAIN_NAME infotype.
    // If a DOMAIN_NAME match is part of an EMAIL_ADDRESS match, the DOMAIN_NAME match will
    // be excluded.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$domainName])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infoTypes)
        ->setCustomInfoTypes([$customInfoType])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf(
                '  Likelihood: %s' . PHP_EOL,
                Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import google.cloud.dlp

def inspect_string_without_overlap(project: str, content_string: str) -> None:
    """Matches EMAIL_ADDRESS and DOMAIN_NAME, but DOMAIN_NAME is omitted
    if it overlaps with EMAIL_ADDRESS

    Uses the Data Loss Prevention API to omit matches of one infotype
    that overlap with another.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "DOMAIN_NAME"}, {"name": "EMAIL_ADDRESS"}]

    # Define a custom info type to exclude email addresses
    custom_info_types = [
        {
            "info_type": {"name": "EMAIL_ADDRESS"},
            "exclusion_type": google.cloud.dlp_v2.CustomInfoType.ExclusionType.EXCLUSION_TYPE_EXCLUDE,
        }
    ]

    # Construct a rule set that will exclude DOMAIN_NAME matches
    # that overlap with EMAIL_ADDRESS matches
    rule_set = [
        {
            "info_types": [{"name": "DOMAIN_NAME"}],
            "rules": [
                {
                    "exclusion_rule": {
                        "exclude_info_types": {
                            "info_types": [{"name": "EMAIL_ADDRESS"}]
                        },
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": info_types_to_locate,
        "custom_info_types": custom_info_types,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

JSON과 함께 DLP API를 사용하는 데 대한 자세한 내용은 JSON 빠른 시작을 참조하세요.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"DOMAIN_NAME"
        },
        {
          "name":"EMAIL_ADDRESS"
        }
      ],
      "customInfoTypes":[
        {
          "infoType":{
            "name":"EMAIL_ADDRESS"
          },
          "exclusionType":"EXCLUSION_TYPE_EXCLUDE"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"DOMAIN_NAME"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "excludeInfoTypes":{
                  "infoTypes":[
                    {
                      "name":"EMAIL_ADDRESS"
                    }
                  ]
                },
                "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

문자열 근처에 있는 일치 항목 생략

다음 예시에서는 'SKU'라는 단어가 10자 이내 또는 10자 이내인 경우 US_SOCIAL_SECURITY_NUMBER infoType 감지기에서 일치 항목을 제외하는 방법을 보여줍니다.

제외 규칙으로 인해 이 예시에서는 잠재적인 미국 사회보장번호로 222-22-2222를 분류하지 않습니다.

{
  "item": {
    "value": "The customer sent the product SKU 222-22-2222"
  },
  "inspectConfig": {
    "infoTypes": [
      {
        "name": "US_SOCIAL_SECURITY_NUMBER"
      }
    ],
    "ruleSet": [
      {
        "infoTypes": [
          {
            "name": "US_SOCIAL_SECURITY_NUMBER"
          }
        ],
        "rules": [
          {
            "exclusionRule": {
              "excludeByHotword": {
                "hotwordRegex": {
                  "pattern": "(SKU)"
                },
                "proximity": {
                  "windowBefore": 10,
                  "windowAfter": 10
                }
              },
              "matchingType": "MATCHING_TYPE_FULL_MATCH"
            }
          }
        ]
      }
    ],
    "includeQuote": true
  }
}

전체 데이터 열에서 발견 항목 생략

다음 예시에서는 해당 열의 이름이 정규 표현식과 일치하는 경우 테이블 형식의 전체 열에서 발견 항목을 제외하는 방법을 보여줍니다. 여기서 US_SOCIAL_SECURITY_NUMBER infoType 감지기와 일치하는 모든 발견 항목은 해당 결과가 모의 사회보장번호 열에 있으면 결과에서 제외됩니다.

111-11-1111가 가짜 사회보장번호 열에 있으므로 이 예시에서는 222-22-2222만 반환합니다.

{
  "item": {
    "table": {
      "headers": [
        {
          "name": "Fake Social Security Number"
        },
        {
          "name": "Real Social Security Number"
        }
      ],
      "rows": [
        {
          "values": [
            {
              "stringValue": "111-11-1111"
            },
            {
              "stringValue": "222-22-2222"
            }
          ]
        }
      ]
    }
  },
  "inspectConfig": {
    "infoTypes": [
      {
        "name": "US_SOCIAL_SECURITY_NUMBER"
      }
    ],
    "includeQuote": true,
    "ruleSet": [
      {
        "infoTypes": [
          {
            "name": "US_SOCIAL_SECURITY_NUMBER"
          }
        ],
        "rules": [
          {
            "exclusionRule": {
              "excludeByHotword": {
                "hotwordRegex": {
                  "pattern": "(Fake Social Security Number)"
                },
                "proximity": {
                  "windowBefore": 1
                }
              },
              "matchingType": "MATCHING_TYPE_FULL_MATCH"
            }
          }
        ]
      }
    ],
    "minLikelihood": "POSSIBLE"
  }
}

핫워드 규칙

핫워드 규칙은 다음과 같은 경우에 유용합니다.

• 스캔 일치 항목에 할당되는 가능성 값을 일치 항목의 핫워드 근접도를 기준으로 변경하려는 경우. 예를 들어 '환자'라는 단어의 근접성에 따라 환자 이름과 일치할 가능성이 높은 값을 설정할 수 있습니다.
• 구조화된 테이블 형식 데이터를 검사할 때 열 헤더 이름을 기준으로 일치 항목에 할당된 가능성 값을 변경하려는 경우 예를 들어 ACCOUNT_ID 헤더가 있는 열에 있는 US_SOCIAL_SECURITY_NUMBER의 가능성 값을 더 높게 설정할 수 있습니다.

핫워드 규칙 API 개요

Sensitive Data Protection의 InspectionRule 객체 내에서 핫워드의 특정 근접도에 맞게 발견 항목 가능성을 조정하는 HotwordRule 객체를 지정합니다.

InspectionRule 객체는 InspectionRuleSet 객체에서 규칙 집합이 적용되는 infoType 감지기 목록과 함께 '규칙 집합'으로 그룹화됩니다. 규칙 집합 내의 규칙은 지정된 순서에 따라 적용됩니다.

핫워드 규칙 예시 시나리오

다음 코드 스니펫에서는 특정 시나리오에서 Sensitive Data Protection을 구성하는 방법을 보여줍니다.

핫워드 '환자'가 근접한 위치에 있는 경우 PERSON_NAME 일치의 가능성을 높임

다음 JSON 스니펫과 여러 언어로 된 코드는 의료 데이터베이스에서 환자 이름을 스캔하기 위한 목적으로 InspectConfig 속성을 사용하는 방법을 보여줍니다. Sensitive Data Protection에서 기본 제공하는 PERSON_NAME infoType 감지기를 사용할 수 있지만 Sensitive Data Protection은 환자 이름뿐만 아니라 모든 사람의 이름에서 일치 항목을 검색합니다. 이 문제를 해결하려면 잠재적인 일치 항목의 첫 글자로부터 특정 문자 수 만큼의 근접도 내에서 '환자'라는 단어를 찾는 핫워드 규칙을 포함할 수 있습니다. 이는 특수한 기준에 해당하므로 이 패턴과 일치하는 결과에 'very likely' 가능성을 할당할 수 있습니다. InspectConfig 내에서 최소 Likelihood를 VERY_LIKELY로 설정하면 이 구성에 대한 일치 항목만 결과에 반환되도록 보장할 수 있습니다.

중요: 이 페이지의 코드를 사용하려면 먼저 Sensitive Data Protection 클라이언트를 설정해야 합니다. Sensitive Data Protection 클라이언트 설치 및 만들기에 대한 자세한 내용은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요. JSON을 Sensitive Data Protection REST 엔드포인트로 전송할 때는 클라이언트 라이브러리가 필요하지 않습니다.

C#

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using System;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectStringCustomHotword
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, string customHotword)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem
        {
            ByteItem = byteContentItem
        };

        var hotwordRule = new DetectionRule.Types.HotwordRule
        {
            HotwordRegex = new Regex { Pattern = customHotword },
            Proximity = new DetectionRule.Types.Proximity { WindowBefore = 50 },
            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment { FixedLikelihood = Likelihood.VeryLikely }
        };

        var infoType = new InfoType { Name = "PERSON_NAME" };

        var inspectionRuleSet = new InspectionRuleSet
        {
            InfoTypes = { infoType },
            Rules = { new InspectionRule { HotwordRule = hotwordRule } }
        };

        var inspectConfig = new InspectConfig
        {
            InfoTypes = { infoType },
            IncludeQuote = true,
            RuleSet = { inspectionRuleSet },
            MinLikelihood = Likelihood.VeryLikely
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = inspectConfig
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringCustomHotWord inspects a string from sensitive data by using a custom hot word
func inspectStringCustomHotWord(w io.Writer, projectID, textToInspect, customHotWord, infoTypeName string) error {
	// projectID := "my-project-id"
	// textToInspect := "patient name: John Doe"
	// customHotWord := "patient"
	// infoTypeName := "PERSON_NAME"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Increase likelihood of matches that have customHotword nearby
	hotwordRule := &dlppb.InspectionRule_HotwordRule{

		HotwordRule: &dlppb.CustomInfoType_DetectionRule_HotwordRule{
			HotwordRegex: &dlppb.CustomInfoType_Regex{
				Pattern: customHotWord,
			},
			Proximity: &dlppb.CustomInfoType_DetectionRule_Proximity{
				WindowBefore: 50,
			},
			LikelihoodAdjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
				Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
					FixedLikelihood: dlppb.Likelihood_VERY_LIKELY,
				},
			},
		},
	}

	// Construct a ruleset that applies the hotword rule to the PERSON_NAME infotype.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: infoTypeName}, //"PERSON_NAME"
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_HotwordRule{
					HotwordRule: hotwordRule.HotwordRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes: []*dlppb.InfoType{
				{Name: infoTypeName}, //"PERSON_NAME"
			},
			IncludeQuote:  true,
			MinLikelihood: dlppb.Likelihood_VERY_LIKELY,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Parse the response and process results
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.HotwordRule;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.LikelihoodAdjustment;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.Proximity;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.Likelihood;
import com.google.privacy.dlp.v2.LocationName;
import com.google.protobuf.ByteString;
import java.io.IOException;

public class InspectStringCustomHotword {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "patient name: John Doe";
    String customHotword = "patient";
    inspectStringCustomHotword(projectId, textToInspect, customHotword);
  }

  // Inspects the provided text.
  public static void inspectStringCustomHotword(
      String projectId, String textToInspect, String customHotword) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Increase likelihood of matches that have customHotword nearby
      HotwordRule hotwordRule =
          HotwordRule.newBuilder()
              .setHotwordRegex(Regex.newBuilder().setPattern(customHotword))
              .setProximity(Proximity.newBuilder().setWindowBefore(50))
              .setLikelihoodAdjustment(
                  LikelihoodAdjustment.newBuilder().setFixedLikelihood(Likelihood.VERY_LIKELY))
              .build();

      // Construct a ruleset that applies the hotword rule to the PERSON_NAME infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME").build())
              .addRules(InspectionRule.newBuilder().setHotwordRule(hotwordRule))
              .build();

      // Construct the configuration for the Inspect request.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME").build())
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .setMinLikelihood(Likelihood.VERY_LIKELY)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'patient name: John Doe';

// Custom hotward
// const customHotword = 'patient';

async function inspectStringCustomHotword() {
  // Specify the type and content to be inspected.
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Increase likelihood of matches that have customHotword nearby.
  const hotwordRule = {
    hotwordRegex: {
      pattern: customHotword,
    },
    proximity: {
      windowBefore: 50,
    },
    likelihoodAdjustment: {
      fixedLikelihood:
        DLP.protos.google.privacy.dlp.v2.Likelihood.VERY_LIKELY,
    },
  };

  // Construct a ruleset that applies the hotword rule to the PERSON_NAME infotype.
  const ruleSet = [
    {
      infoTypes: [{name: 'PERSON_NAME'}],
      rules: [
        {
          hotwordRule: hotwordRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request.
  const inspectConfig = {
    infoTypes: [{name: 'PERSON_NAME'}],
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringCustomHotword();

PHP

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\HotwordRule;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\LikelihoodAdjustment;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\Proximity;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;

/**
 * Inspect a string from sensitive data by using a custom hotword
 * Increase the likelihood of a PERSON_NAME match if there is the hotword "patient" nearby. Illustrates using the InspectConfig property for the purpose of scanning a medical database for patient names. You can use Cloud DLP's built-in PERSON_NAME infoType detector, but that causes Cloud DLP to match on all names of people, not just names of patients. To fix this, you can include a hotword rule that looks for the word "patient" within a certain character proximity from the first character of potential matches. You can then assign findings that match this pattern a likelihood of "very likely," since they correspond to your special criteria. Setting the minimum likelihood to VERY_LIKELY within InspectConfig ensures that only matches to this configuration are returned in findings.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_custom_hotword(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'patient name: John Doe'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Construct hotword rules
    $hotwordRule = (new HotwordRule())
        ->setHotwordRegex(
            (new Regex())
                ->setPattern('patient')
        )
        ->setProximity(
            (new Proximity())
                ->setWindowBefore(50)
        )
        ->setLikelihoodAdjustment(
            (new LikelihoodAdjustment())
                ->setFixedLikelihood(Likelihood::VERY_LIKELY)
        );

    // Construct a ruleset that applies the hotword rule to the PERSON_NAME infotype.
    $personName = (new InfoType())
        ->setName('PERSON_NAME');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$personName])
        ->setRules([
            (new InspectionRule())
                ->setHotwordRule($hotwordRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes([$personName])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet])
        ->setMinLikelihood(Likelihood::VERY_LIKELY);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import google.cloud.dlp

def inspect_string_w_custom_hotword(
    project: str, content_string: str, custom_hotword: str = "patient"
) -> None:
    """Uses the Data Loss Prevention API increase likelihood for matches on
       PERSON_NAME if the user specified custom hot-word is present. Only
       includes findings with the increased likelihood by setting a minimum
       likelihood threshold of VERY_LIKELY.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        custom_hotword: The custom hot-word used for likelihood boosting.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a rule set with caller provided hotword, with a likelihood
    # boost to VERY_LIKELY when the hotword are present within the 50 character-
    # window preceding the PII finding.
    hotword_rule = {
        "hotword_regex": {"pattern": custom_hotword},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.VERY_LIKELY
        },
        "proximity": {"window_before": 50},
    }

    rule_set = [
        {
            "info_types": [{"name": "PERSON_NAME"}],
            "rules": [{"hotword_rule": hotword_rule}],
        }
    ]

    # Construct the configuration dictionary with the custom regex info type.
    inspect_config = {
        "rule_set": rule_set,
        "min_likelihood": google.cloud.dlp_v2.Likelihood.VERY_LIKELY,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

JSON과 함께 DLP API를 사용하는 데 대한 자세한 내용은 JSON 빠른 시작을 참조하세요.

...
  "inspectConfig":{
    "infoTypes":[
      {
        "name":"PERSON_NAME"
      }
    ],
    "ruleSet":[
      {
        "infoTypes":[
          {
            "name":"PERSON_NAME"
          }
        ],
        "rules":[
          {
            "hotwordRule":{
              "hotwordRegex":{
                "pattern":"patient"
              },
              "proximity":{
                "windowBefore":50
              },
              "likelihoodAdjustment":{
                "fixedLikelihood":"VERY_LIKELY"
              }
            }
          }
        ]
      }
    ],
    "minLikelihood":"VERY_LIKELY"
  }
...

핫워드에 대한 자세한 내용은 일치 가능성 맞춤설정을 참조하세요.

여러 검사 규칙 시나리오

다음 InspectConfig JSON 스니펫과 여러 언어로 된 코드는 제외 및 핫워드 규칙을 모두 적용하는 방법을 보여줍니다. 이 스니펫 규칙 집합에는 핫워드 규칙과 사전 및 정규 표현식 제외 규칙이 모두 포함됩니다. rules 요소의 배열 내에 4개의 규칙이 지정되어 있습니다.

중요: 이 페이지의 코드를 사용하려면 먼저 Sensitive Data Protection 클라이언트를 설정해야 합니다. Sensitive Data Protection 클라이언트 설치 및 만들기에 대한 자세한 내용은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요. JSON을 Sensitive Data Protection REST 엔드포인트로 전송할 때는 클라이언트 라이브러리가 필요하지 않습니다.

C#

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

using System;
using System.Text.RegularExpressions;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectStringMultipleRules
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem
        {
            ByteItem = byteContentItem
        };

        var patientRule = new DetectionRule.Types.HotwordRule
        {
            HotwordRegex = new CustomInfoType.Types.Regex { Pattern = "patient" },
            Proximity = new DetectionRule.Types.Proximity { WindowBefore = 10 },
            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment { FixedLikelihood = Likelihood.VeryLikely }
        };

        var doctorRule = new DetectionRule.Types.HotwordRule
        {
            HotwordRegex = new CustomInfoType.Types.Regex { Pattern = "doctor" },
            Proximity = new DetectionRule.Types.Proximity { WindowBefore = 10 },
            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment { FixedLikelihood = Likelihood.Unlikely }
        };

        // Construct exclusion rules
        var quasimodoRule = new ExclusionRule
        {
            Dictionary = new Dictionary { WordList = new Dictionary.Types.WordList { Words = { "Quasimodo" } } },
            MatchingType = MatchingType.PartialMatch
        };

        var redactedRule = new ExclusionRule
        {
            Regex = new CustomInfoType.Types.Regex { Pattern = "REDACTED" },
            MatchingType = MatchingType.PartialMatch
        };

        var infoType = new InfoType { Name = "PERSON_NAME" };

        var inspectionRuleSet = new InspectionRuleSet
        {
            InfoTypes = { infoType },
            Rules =
            {
                new InspectionRule { HotwordRule = patientRule },
                new InspectionRule { HotwordRule = doctorRule},
                new InspectionRule { ExclusionRule = quasimodoRule },
                new InspectionRule { ExclusionRule = redactedRule }
            }
        };

        var inspectConfig = new InspectConfig
        {
            InfoTypes = { infoType },
            IncludeQuote = true,
            RuleSet = { inspectionRuleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = inspectConfig
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringMultipleRules inspects the provided text,
// avoiding matches specified in the exclusion list.
// this function implements the both exclusion and hot word rules.
func inspectStringMultipleRules(w io.Writer, projectID, textToInspect string) error {
	// projectID := "my-project-id"
	// textToInspect := "patient: Jane Doe"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	ContentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Construct the rule that adjust the likelihood of findings
	// within a certain proximity of hot-word("patient").
	patientRule := &dlppb.InspectionRule_HotwordRule{
		HotwordRule: &dlppb.CustomInfoType_DetectionRule_HotwordRule{
			HotwordRegex: &dlppb.CustomInfoType_Regex{
				Pattern: "patient",
			},
			Proximity: &dlppb.CustomInfoType_DetectionRule_Proximity{
				WindowBefore: 10,
			},
			LikelihoodAdjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
				Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
					FixedLikelihood: dlppb.Likelihood_VERY_LIKELY,
				},
			},
		},
	}

	// Construct the rule that adjust the likelihood of findings
	// within a certain proximity of hot-word("doctor").
	doctorRule := &dlppb.InspectionRule_HotwordRule{
		HotwordRule: &dlppb.CustomInfoType_DetectionRule_HotwordRule{
			HotwordRegex: &dlppb.CustomInfoType_Regex{
				Pattern: "doctor",
			},
			Proximity: &dlppb.CustomInfoType_DetectionRule_Proximity{
				WindowBefore: 10,
			},
			LikelihoodAdjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
				Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
					FixedLikelihood: dlppb.Likelihood_UNLIKELY,
				},
			},
		},
	}

	// Construct the exclusion rule that avoids the matches for the specified word list.
	quasimodoRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Dictionary{
			Dictionary: &dlppb.CustomInfoType_Dictionary{
				Source: &dlppb.CustomInfoType_Dictionary_WordList_{
					WordList: &dlppb.CustomInfoType_Dictionary_WordList{
						Words: []string{"Quasimodo"},
					},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct the exclusion rule that avoids the matches for the specified regex pattern.
	redactedRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Regex{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: "REDACTED",
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleSet that applies the rules to the PERSON_NAME infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "PERSON_NAME"},
		},
		Rules: []*dlppb.InspectionRule{
			{Type: &dlppb.InspectionRule_HotwordRule{HotwordRule: doctorRule.HotwordRule}},
			{Type: &dlppb.InspectionRule_HotwordRule{HotwordRule: patientRule.HotwordRule}},
			{Type: &dlppb.InspectionRule_ExclusionRule{ExclusionRule: quasimodoRule}},
			{Type: &dlppb.InspectionRule_ExclusionRule{ExclusionRule: redactedRule}},
		},
	}

	// Construct the configuration for the Inspect request, including the ruleSet.
	inspectConfig := &dlppb.InspectConfig{
		InfoTypes: []*dlppb.InfoType{
			{Name: "PERSON_NAME"},
		},
		IncludeQuote: true,
		RuleSet: []*dlppb.InspectionRuleSet{
			ruleSet,
		},
	}

	// Create and send the request.
	req := &dlppb.InspectContentRequest{
		Parent:        fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:          ContentItem,
		InspectConfig: inspectConfig,
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.HotwordRule;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.LikelihoodAdjustment;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.Proximity;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary.WordList;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.Likelihood;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;

public class InspectStringMultipleRules {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "patient: Jane Doe";
    inspectStringMultipleRules(projectId, textToInspect);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringMultipleRules(String projectId, String textToInspect)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Construct hotword rules
      HotwordRule patientRule =
          HotwordRule.newBuilder()
              .setHotwordRegex(Regex.newBuilder().setPattern("patient"))
              .setProximity(Proximity.newBuilder().setWindowBefore(10))
              .setLikelihoodAdjustment(
                  LikelihoodAdjustment.newBuilder().setFixedLikelihood(Likelihood.VERY_LIKELY))
              .build();

      HotwordRule doctorRule =
          HotwordRule.newBuilder()
              .setHotwordRegex(Regex.newBuilder().setPattern("doctor"))
              .setProximity(Proximity.newBuilder().setWindowBefore(10))
              .setLikelihoodAdjustment(
                  LikelihoodAdjustment.newBuilder().setFixedLikelihood(Likelihood.UNLIKELY))
              .build();

      // Construct exclusion rules
      ExclusionRule quasimodoRule =
          ExclusionRule.newBuilder()
              .setDictionary(
                  Dictionary.newBuilder().setWordList(WordList.newBuilder().addWords("Quasimodo")))
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .build();

      ExclusionRule redactedRule =
          ExclusionRule.newBuilder()
              .setRegex(Regex.newBuilder().setPattern("REDACTED"))
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .build();

      // Construct a ruleset that applies the rules to the PERSON_NAME infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .addRules(InspectionRule.newBuilder().setHotwordRule(patientRule))
              .addRules(InspectionRule.newBuilder().setHotwordRule(doctorRule))
              .addRules(InspectionRule.newBuilder().setExclusionRule(quasimodoRule))
              .addRules(InspectionRule.newBuilder().setExclusionRule(redactedRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'patient: Jane Doe';

async function inspectStringMultipleRules() {
  // Construct item to inspect
  const item = {value: string};

  // Construct hotword rules
  const patientRule = {
    hotwordRegex: {pattern: 'patient'},
    proximity: {windowBefore: 10},
    likelihoodAdjustment: {
      fixedLikelihood:
        DLP.protos.google.privacy.dlp.v2.Likelihood.VERY_LIKELY,
    },
  };

  const doctorRule = {
    hotwordRegex: {pattern: 'doctor'},
    proximity: {windowBefore: 10},
    likelihoodAdjustment: {
      fixedLikelihood: DLP.protos.google.privacy.dlp.v2.Likelihood.UNLIKELY,
    },
  };

  // Construct exclusion rules
  const quasimodoRule = {
    dictionary: {wordList: {words: ['quasimodo']}},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  const redactedRule = {
    regex: {pattern: 'REDACTED'},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // The infoTypes of information to match
  const infoTypes = [{name: 'PERSON_NAME'}];

  // Construct a ruleset that applies the rules to the PERSON_NAME infotype.
  const ruleSet = [
    {
      infoTypes: infoTypes,
      rules: [
        {hotwordRule: patientRule},
        {hotwordRule: doctorRule},
        {exclusionRule: quasimodoRule},
        {exclusionRule: redactedRule},
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringMultipleRules();

PHP

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\HotwordRule;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\LikelihoodAdjustment;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\Proximity;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary\WordList;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data by using multiple rules
 * Illustrates applying both exclusion and hotword rules. This snippet's rule set includes both hotword rules and dictionary and regex exclusion rules. Notice that the four rules are specified in an array within the rules element.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_multiple_rules(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'patient: Jane Doe'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Construct hotword rules
    $patientRule = (new HotwordRule())
        ->setHotwordRegex((new Regex())
            ->setPattern('patient'))
        ->setProximity((new Proximity())
            ->setWindowBefore(10))
        ->setLikelihoodAdjustment((new LikelihoodAdjustment())
            ->setFixedLikelihood(Likelihood::VERY_LIKELY));

    $doctorRule = (new HotwordRule())
        ->setHotwordRegex((new Regex())
            ->setPattern('doctor'))
        ->setProximity((new Proximity())
            ->setWindowBefore(10))
        ->setLikelihoodAdjustment((new LikelihoodAdjustment())
            ->setFixedLikelihood(Likelihood::VERY_UNLIKELY));

    // Construct exclusion rules
    $wordList = (new Dictionary())
        ->setWordList((new WordList())
            ->setWords(['Quasimodo']));

    $quasimodoRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setDictionary($wordList);

    $redactedRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setRegex((new Regex())
            ->setPattern('REDACTED'));

    // Specify the exclusion rule and build-in info type the inspection will look for.
    $personName = (new InfoType())
        ->setName('PERSON_NAME');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$personName])
        ->setRules([
            (new InspectionRule())
                ->setHotwordRule($patientRule),
            (new InspectionRule())
                ->setHotwordRule($doctorRule),
            (new InspectionRule())
                ->setExclusionRule($quasimodoRule),
            (new InspectionRule())
                ->setExclusionRule($redactedRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes([$personName])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Sensitive Data Protection의 클라이언트 라이브러리를 설치하고 사용하는 방법은 Sensitive Data Protection 클라이언트 라이브러리를 참조하세요.

Sensitive Data Protection에 인증하려면 애플리케이션 기본 사용자 인증 정보를 설정합니다. 자세한 내용은 로컬 개발 환경의 인증 설정을 참조하세요.

GitHub에서 보기 의견 보내기

import google.cloud.dlp

def inspect_string_multiple_rules(project: str, content_string: str) -> None:
    """Uses the Data Loss Prevention API to modify likelihood for matches on
       PERSON_NAME combining multiple hotword and exclusion rules.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct hotword rules
    patient_rule = {
        "hotword_regex": {"pattern": "patient"},
        "proximity": {"window_before": 10},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.VERY_LIKELY
        },
    }
    doctor_rule = {
        "hotword_regex": {"pattern": "doctor"},
        "proximity": {"window_before": 10},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.UNLIKELY
        },
    }

    # Construct exclusion rules
    quasimodo_rule = {
        "dictionary": {"word_list": {"words": ["quasimodo"]}},
        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
    }
    redacted_rule = {
        "regex": {"pattern": "REDACTED"},
        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
    }

    # Construct the rule set, combining the above rules
    rule_set = [
        {
            "info_types": [{"name": "PERSON_NAME"}],
            "rules": [
                {"hotword_rule": patient_rule},
                {"hotword_rule": doctor_rule},
                {"exclusion_rule": quasimodo_rule},
                {"exclusion_rule": redacted_rule},
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": [{"name": "PERSON_NAME"}],
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

JSON과 함께 DLP API를 사용하는 데 대한 자세한 내용은 JSON 빠른 시작을 참조하세요.

...
  "inspectConfig":{
    "infoTypes":[
      {
        "name":"PERSON_NAME"
      }
    ],
    "ruleSet":[
      {
        "infoTypes":[
          {
            "name":"PERSON_NAME"
          }
        ],
        "rules":[
          {
            "hotwordRule":{
              "hotwordRegex":{
                "pattern":"patient"
              },
              "proximity":{
                "windowBefore":10
              },
              "likelihoodAdjustment":{
                "fixedLikelihood":"VERY_LIKELY"
              }
            }
          },
          {
            "hotwordRule":{
              "hotwordRegex":{
                "pattern":"doctor"
              },
              "proximity":{
                "windowBefore":10
              },
              "likelihoodAdjustment":{
                "fixedLikelihood":"UNLIKELY"
              }
            }
          },
          {
            "exclusionRule":{
              "dictionary":{
                "wordList":{
                  "words":[
                    "Quasimodo"
                  ]
                }
              },
              "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
            }
          },
          {
            "exclusionRule":{
              "regex":{
                "pattern":"REDACTED"
              },
              "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
            }
          }
        ]
      }
    ]
  }
...

겹치는 infoType 감지기

기본 제공 infoType 감지기와 이름이 같은 커스텀 infoType 감지기를 정의하는 경우도 가능합니다. '핫워드 규칙 예 시나리오' 섹션의 예에서 볼 수 있듯이, 기본 제공 infoType과 이름이 같은 커스텀 infoType 감지기를 만드는 경우 새로운 infoType 감지기에서 감지된 모든 결과가 기본 제공 감지기에 감지된 결과에 추가됩니다. 이는 기본 제공 infoType이 InspectConfig 객체의 infoType 목록에 지정된 경우에만 해당됩니다.

새 커스텀 infoType 감지기를 만들 때는 예시 콘텐츠로 철저히 테스트하여 의도한 대로 작동하는지 확인해야 합니다.