Modifica dei rilevatori infoType per perfezionare i risultati della scansione

I rilevatori di infoType integrati di Sensitive Data Protection sono efficaci nel trovare tipi comuni di dati sensibili. I rilevatori di infoType personalizzati ti consentono di personalizzare completamente il tuo rilevatore di dati sensibili. Le regole di ispezione consentono di perfezionare i risultati della scansione restituiti da Sensitive Data Protection modificando il meccanismo di rilevamento di un determinato rilevatore infoType.

Se vuoi escludere o includere più valori dai risultati restituiti da un rilevatore infoType integrato, puoi creare un nuovo infoType personalizzato da zero e definire tutti i criteri che Sensitive Data Protection deve cercare. In alternativa, puoi perfezionare i risultati restituiti dai rilevatori integrati o personalizzati di Sensitive Data Protection in base ai criteri da te specificati. A questo scopo, aggiungi regole di ispezione che consentono di ridurre il rumore, aumentare la precisione e il richiamo oppure regolare la probabilità dei risultati dell'analisi.

Questo argomento illustra come utilizzare i due tipi di regole di ispezione per escludere determinati risultati o aggiungerne altri, il tutto in base a criteri personalizzati da te specificati. In questo argomento vengono presentati diversi scenari in cui potresti voler modificare un rilevatore infoType esistente.

Nota: i metodi descritti in questo argomento non sono pensati per velocizzare le scansioni, ma possono aiutare a ridurre il rumore riducendo il volume di output e il numero di risultati archiviati.

I due tipi di regole di ispezione sono:

• Regole di esclusione, che consentono di escludere risultati falsi o indesiderati.
• Regole hotword, che consentono di rilevare ulteriori risultati.

Regole di esclusione

Le regole di esclusione sono utili in situazioni come le seguenti:

• Vuoi escludere le corrispondenze di scansione duplicate nei risultati causati da rilevatori di infoType sovrapposti. Ad esempio, stai eseguendo la scansione di indirizzi email e numeri di telefono, ma ricevi due hit per gli indirizzi email contenenti numeri di telefono, ad esempio "[e-mail]".
• Rileva un rumore nei risultati della scansione. Ad esempio, vedi lo stesso indirizzo email fittizio (come [e-mail]) o dominio (ad esempio "example.com") che ha restituito un numero eccessivo di volte in seguito a una scansione di indirizzi email legittimi.
• Hai un elenco di termini, frasi o combinazioni di caratteri che vuoi escludere dai risultati.
• Vuoi escludere dai risultati un'intera colonna di dati.
• Vuoi escludere i risultati vicini a una stringa che corrisponde a un'espressione regolare.

Panoramica dell'API Esclusione regole

Sensitive Data Protection definisce una regola di esclusione nell'oggetto ExclusionRule. In ExclusionRule, specifichi una delle seguenti opzioni:

• Un oggetto Dictionary, che contiene un elenco di stringhe da escludere dai risultati.
• Un oggetto Regex, che definisce un modello di espressione regolare. Le stringhe che corrispondono al pattern vengono escluse dai risultati.
• Un oggetto ExcludeInfoTypes, che contiene un array di rilevatori infoType. Se uno dei rilevatori infoType elencati qui corrisponde a un risultato, viene escluso dai risultati.

• Un oggetto ExcludeByHotword, che contiene quanto segue:

  • Un'espressione regolare che definisce la hotword.
  • Un valore di proximity che definisce quanto deve essere vicina la hotword al risultato.

  Se il risultato è compreso nella prossimità impostata, viene escluso dai risultati. Per le tabelle, questo tipo di regola di esclusione consente di escludere un'intera colonna di dati dai risultati.

Scenari di esempio di regole di esclusione

Ciascuno dei seguenti snippet JSON illustra come configurare la protezione dei dati sensibili per lo scenario specifico.

Ometti un indirizzo email specifico dalla scansione del rilevatore EMAIL_ADDRESS

Il seguente snippet e codice JSON in diversi linguaggi illustra come indicare a Sensitive Data Protection utilizzando un elemento InspectConfig che dovrebbe evitare la corrispondenza su "[e-mail]" in una scansione che utilizza il rilevatore infoType EMAIL_ADDRESS:

Importante: il codice in questa pagina richiede prima la configurazione di un client Sensitive Data Protection. Per saperne di più sull'installazione e sulla creazione di un client Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection. (L'invio di JSON a endpoint REST di Sensitive Data Protection non richiede una libreria client.)

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

using System;
using System.Collections.Generic;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringWithExclusionDict
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, List<String> excludedMatchList)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteContentItem };

        var infoTypes = new string[] { "PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER" }.Select(it => new InfoType { Name = it });

        var exclusionRule = new ExclusionRule
        {
            MatchingType = MatchingType.FullMatch,
            Dictionary = new CustomInfoType.Types.Dictionary
            {
                WordList = new CustomInfoType.Types.Dictionary.Types.WordList
                {
                    Words = { excludedMatchList }
                }
            }
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "EMAIL_ADDRESS" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringWithExclusionDictionary inspects a string for sensitive data
// using exclusion dictionary, here the function omits a specific email address
// from an EMAIL_ADDRESS detector scan with an exclusion dictionary
func inspectStringWithExclusionDictionary(w io.Writer, projectID, textToInspect string, excludedMatchList []string) error {
	// projectID := "my-project-id"
	// textToInspect := "Some email addresses: [e-mail], [e-mail]"
	// excludedMatchList := []string{"[e-mail]"}

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "PHONE_NUMBER"},
		{Name: "EMAIL_ADDRESS"},
		{Name: "CREDIT_CARD_NUMBER"},
	}

	// Exclude matches from the specified excludedMatchList.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Dictionary{
			Dictionary: &dlppb.CustomInfoType_Dictionary{
				Source: &dlppb.CustomInfoType_Dictionary_WordList_{
					WordList: &dlppb.CustomInfoType_Dictionary_WordList{
						Words: excludedMatchList,
					},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_FULL_MATCH,
	}

	// Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "EMAIL_ADDRESS"},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		// Construct the configuration for the Inspect request, including the ruleSet.
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes:    infoTypes,
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary.WordList;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.Arrays;
import java.util.List;

public class InspectStringWithExclusionDict {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Some email addresses: [e-mail], [e-mail]";
    List<String> excludedMatchList = Arrays.asList("[e-mail]");
    inspectStringWithExclusionDict(projectId, textToInspect, excludedMatchList);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringWithExclusionDict(
      String projectId, String textToInspect, List<String> excludedMatchList) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName : new String[] {"PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Exclude matches from the specified excludedMatchList.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setMatchingType(MatchingType.MATCHING_TYPE_FULL_MATCH)
              .setDictionary(
                  Dictionary.newBuilder()
                      .setWordList(WordList.newBuilder().addAllWords(excludedMatchList)))
              .build();

      // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("EMAIL_ADDRESS"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Some email addresses: [e-mail], [e-mail]';

// The infoTypes of information to match
// const infoTypes = [{ name: 'EMAIL_ADDRESS' }];

// Words to exclude
// const excludedWords = ['[e-mail]'];

async function inspectStringWithExclusionDict() {
  // Specify the type and content to be inspected.
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Exclude matches from the specified excludedWords.
  const exclusionRule = {
    dictionary: {
      wordList: {
        words: excludedWords,
      },
    },
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
  };

  // Construct a ruleset that applies the exclusion rule to the specified infotype.
  const ruleSet = [
    {
      infoTypes: infoTypes,
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print Findings
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringWithExclusionDict();

PHP

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary\WordList;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, using exclusion dictionary
 * Omit a specific email address from an EMAIL_ADDRESS detector scan with an exclusion dictionary.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_with_exclusion_dict(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Some email addresses: [e-mail], [e-mail]'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $infotypes = [
        (new InfoType())->setName('PHONE_NUMBER'),
        (new InfoType())->setName('EMAIL_ADDRESS'),
        (new InfoType())->setName('CREDIT_CARD_NUMBER'),
    ];

    // Exclude matches from the specified excludedMatchList.
    $excludedMatchList = (new Dictionary())
        ->setWordList((new WordList())
            ->setWords(['[e-mail]']));
    $matchingType = MatchingType::MATCHING_TYPE_FULL_MATCH;
    $exclusionRule = (new ExclusionRule())
        ->setMatchingType($matchingType)
        ->setDictionary($excludedMatchList);

    // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
    $emailAddress = (new InfoType())
        ->setName('EMAIL_ADDRESS');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$emailAddress])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infotypes)
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

from typing import List

import google.cloud.dlp

def inspect_string_with_exclusion_dict(
    project: str,
    content_string: str,
    exclusion_list: List[str] = ["[e-mail]"],
) -> None:
    """Inspects the provided text, avoiding matches specified in the exclusion list

    Uses the Data Loss Prevention API to omit matches on EMAIL_ADDRESS if they are
    in the specified exclusion list.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        exclusion_list: The list of strings to ignore matches on

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "EMAIL_ADDRESS"}]

    # Construct a rule set that will only match on EMAIL_ADDRESS
    # if the match text is not in the exclusion list.
    rule_set = [
        {
            "info_types": info_types_to_locate,
            "rules": [
                {
                    "exclusion_rule": {
                        "dictionary": {"word_list": {"words": exclusion_list}},
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": info_types_to_locate,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Consulta la guida rapida di JSON per ulteriori informazioni sull'utilizzo dell'API DLP con JSON.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"EMAIL_ADDRESS"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"EMAIL_ADDRESS"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "dictionary":{
                  "wordList":{
                    "words":[
                      "[e-mail]"
                    ]
                  }
                },
                "matchingType": "MATCHING_TYPE_FULL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Ometti gli indirizzi email che terminano con un dominio specifico dalla scansione del rilevatore EMAIL_ADDRESS

Il seguente snippet e codice JSON in diversi linguaggi illustra come indicare a Sensitive Data Protection utilizzando un InspectConfig che dovrebbe evitare la corrispondenza su qualsiasi indirizzo email che termina con "@example.com" in una scansione che utilizza il rilevatore infoType EMAIL_ADDRESS:

Importante: il codice in questa pagina richiede prima la configurazione di un client Sensitive Data Protection. Per saperne di più sull'installazione e sulla creazione di un client Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection. (L'invio di JSON a endpoint REST di Sensitive Data Protection non richiede una libreria client.)

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

using System;
using System.Collections.Generic;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringWithExclusionRegex
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, string excludedRegex)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteContentItem };

        var infoTypes = new string[] { "PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER" }.Select(it => new InfoType { Name = it });

        var exclusionRule = new ExclusionRule
        {
            MatchingType = MatchingType.FullMatch,
            Regex = new CustomInfoType.Types.Regex { Pattern = excludedRegex }
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "EMAIL_ADDRESS" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringWithExclusionRegex inspects a string excluding REGEX matches
// in this function specifically the function omits email addresses ending with a specific
// domain from EMAIL_ADDRESS detector scan.
func inspectStringWithExclusionRegex(w io.Writer, projectID, textToInspect, excludedRegex string) error {
	// projectID := "my-project-id"
	// textToInspect := "Some email addresses: [e-mail], [e-mail]"
	// excludedRegex := "[e-mail]"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "PHONE_NUMBER"},
		{Name: "EMAIL_ADDRESS"},
		{Name: "CREDIT_CARD_NUMBER"},
	}

	// Exclude matches from the specified excludedMatchList.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Regex{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: excludedRegex,
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_FULL_MATCH,
	}

	// Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "EMAIL_ADDRESS"},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes:    infoTypes,
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class InspectStringWithExclusionRegex {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Some email addresses: [e-mail], [e-mail]";
    String excludedRegex = "[e-mail]";
    inspectStringWithExclusionRegex(projectId, textToInspect, excludedRegex);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringWithExclusionRegex(
      String projectId, String textToInspect, String excludedRegex) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName : new String[] {"PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Exclude matches from the specified excludedMatchList.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setMatchingType(MatchingType.MATCHING_TYPE_FULL_MATCH)
              .setRegex(Regex.newBuilder().setPattern(excludedRegex))
              .build();

      // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("EMAIL_ADDRESS"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Some email addresses: [e-mail], [e-mail]';

// Exclusion Regex
// const exclusionRegex = '[e-mail]';

async function inspectStringMultipleRules() {
  // Specify the type and content to be inspected.
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Info Types for inspection
  const infoTypes = [{name: 'EMAIL_ADDRESS'}];

  // Construct a exclusion rule that uses a regex pattern
  const exclusionRule = {
    regex: {pattern: exclusionRegex},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
  };

  // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
  const ruleSet = [
    {
      infoTypes: infoTypes,
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringMultipleRules();

PHP

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string, excluding REGEX matches
 * Omit email addresses ending with a specific domain from an EMAIL_ADDRESS detector scan.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_with_exclusion_regex(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Some email addresses: [e-mail], [e-mail]'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $infotypes = [
        (new InfoType())->setName('PHONE_NUMBER'),
        (new InfoType())->setName('EMAIL_ADDRESS'),
        (new InfoType())->setName('CREDIT_CARD_NUMBER'),
    ];

    // Exclude matches from the specified excludedRegex.
    $excludedRegex = '[e-mail]';
    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_FULL_MATCH)
        ->setRegex((new Regex())
            ->setPattern($excludedRegex));

    // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([
            (new InfoType())
                ->setName('EMAIL_ADDRESS')
        ])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infotypes)
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import google.cloud.dlp

def inspect_string_with_exclusion_regex(
    project: str, content_string: str, exclusion_regex: str = "[e-mail]"
) -> None:
    """Inspects the provided text, avoiding matches specified in the exclusion regex

    Uses the Data Loss Prevention API to omit matches on EMAIL_ADDRESS if they match
    the specified exclusion regex.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        exclusion_regex: The regular expression to exclude matches on

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "EMAIL_ADDRESS"}]

    # Construct a rule set that will only match on EMAIL_ADDRESS
    # if the specified regex doesn't also match.
    rule_set = [
        {
            "info_types": info_types_to_locate,
            "rules": [
                {
                    "exclusion_rule": {
                        "regex": {"pattern": exclusion_regex},
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": info_types_to_locate,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Consulta la guida rapida di JSON per ulteriori informazioni sull'utilizzo dell'API DLP con JSON.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"EMAIL_ADDRESS"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"EMAIL_ADDRESS"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "regex":{
                  "pattern":"[e-mail]"
                },
                "matchingType": "MATCHING_TYPE_FULL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Ometti le corrispondenze di scansione che includono la sottostringa "TEST"

Il seguente snippet e codice JSON in diversi linguaggi illustra come indicare a Sensitive Data Protection utilizzando un InspectConfig che dovrebbe escludere eventuali risultati che includono il token "TEST" dall'elenco specificato di infoType.

Tieni presente che questo corrisponde a "TEST" come token e non come sottostringa, quindi anche se qualcosa come "[e-mail]" troverà una corrispondenza, "[e-mail]" non lo farà. Se vuoi la corrispondenza in una sottostringa, utilizza un'espressione regolare nella regola di esclusione anziché in un dizionario.

Importante: il codice in questa pagina richiede prima la configurazione di un client Sensitive Data Protection. Per saperne di più sull'installazione e sulla creazione di un client Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection. (L'invio di JSON a endpoint REST di Sensitive Data Protection non richiede una libreria client.)

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

using System;
using System.Collections.Generic;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringWithExclusionDictSubstring
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, List<String> excludedSubstringList)
    {
        var dlp = DlpServiceClient.Create();

        var byteItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteItem };

        var infoTypes = new string[]
        {
            "EMAIL_ADDRESS",
            "DOMAIN_NAME",
            "PHONE_NUMBER",
            "PERSON_NAME"
        }.Select(it => new InfoType { Name = it });

        var exclusionRule = new ExclusionRule
        {
            MatchingType = MatchingType.PartialMatch,
            Dictionary = new CustomInfoType.Types.Dictionary
            {
                WordList = new CustomInfoType.Types.Dictionary.Types.WordList
                {
                    Words = { excludedSubstringList }
                }
            }
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { infoTypes },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringWithExclusionDictSubstring inspects a string
// with an exclusion dictionary substring
func inspectStringWithExclusionDictSubstring(w io.Writer, projectID, textToInspect string, excludedSubString []string) error {
	// projectID := "my-project-id"
	// textToInspect := "Some email addresses: [e-mail], [e-mail]"
	// excludedSubString := []string{"TEST"}

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "EMAIL_ADDRESS"},
		{Name: "DOMAIN_NAME"},
		{Name: "PHONE_NUMBER"},
		{Name: "PERSON_NAME"},
	}

	// Exclude partial matches from the specified excludedSubstringList.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Dictionary{
			Dictionary: &dlppb.CustomInfoType_Dictionary{
				Source: &dlppb.CustomInfoType_Dictionary_WordList_{
					WordList: &dlppb.CustomInfoType_Dictionary_WordList{
						Words: excludedSubString,
					},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleSet that applies the exclusion rule to the EMAIL_ADDRESSES infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: infoTypes,
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes:    infoTypes,
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary.WordList;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.Arrays;
import java.util.List;

public class InspectStringWithExclusionDictSubstring {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Some email addresses: [e-mail], [e-mail]";
    List<String> excludedSubstringList = Arrays.asList("TEST");
    inspectStringWithExclusionDictSubstring(projectId, textToInspect, excludedSubstringList);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringWithExclusionDictSubstring(
      String projectId, String textToInspect, List<String> excludedSubstringList)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName :
          new String[] {"EMAIL_ADDRESS", "DOMAIN_NAME", "PHONE_NUMBER", "PERSON_NAME"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Exclude partial matches from the specified excludedSubstringList.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .setDictionary(
                  Dictionary.newBuilder()
                      .setWordList(WordList.newBuilder().addAllWords(excludedSubstringList)))
              .build();

      // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addAllInfoTypes(infoTypes)
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Some email addresses: [e-mail], [e-mail]';

// List of substrings to be used for exclusion
// const excludedSubstringList = ['Test'];

async function inspectStringExclusionDictSubstr() {
  // Specify the type and content to be inspected.
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Specify the type of info the inspection will look for.
  // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
  const infoTypes = [
    {name: 'EMAIL_ADDRESS'},
    {name: 'DOMAIN_NAME'},
    {name: 'PHONE_NUMBER'},
    {name: 'PERSON_NAME'},
  ];

  // Exclude partial matches from the specified excludedSubstringList.
  const exclusionRule = {
    dictionary: {wordList: {words: excludedSubstringList}},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
  const ruleSet = [
    {
      infoTypes: infoTypes,
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringExclusionDictSubstr();

PHP

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary\WordList;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string with an exclusion dictionary substring
 * Omit scan matches that include the substring "TEST".
 *
 * @param string $projectId                 The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect             The string to inspect.
 * @param array  $excludedSubStringArray    The sub string to excluded.
 */
function inspect_string_with_exclusion_dict_substring(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Some email addresses: [e-mail], [e-mail]',
    array  $excludedSubStringArray = ['Test']
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $infotypes = [
        (new InfoType())->setName('PHONE_NUMBER'),
        (new InfoType())->setName('EMAIL_ADDRESS'),
        (new InfoType())->setName('DOMAIN_NAME'),
        (new InfoType())->setName('PERSON_NAME'),
    ];

    // Exclude matches from the specified excludedSubstringList.
    $excludedSubstringList = (new Dictionary())
        ->setWordList((new WordList())
            ->setWords($excludedSubStringArray));

    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setDictionary($excludedSubstringList);

    // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes($infotypes)
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infotypes)
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

from typing import List

import google.cloud.dlp

def inspect_string_with_exclusion_dict_substring(
    project: str, content_string: str, exclusion_list: List[str] = ["TEST"]
) -> None:
    """Inspects the provided text, avoiding matches that contain excluded tokens

    Uses the Data Loss Prevention API to omit matches if they include tokens
    in the specified exclusion list.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        exclusion_list: The list of strings to ignore partial matches on

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "EMAIL_ADDRESS"}, {"name": "DOMAIN_NAME"}]

    # Construct a rule set that will only match if the match text does not
    # contains tokens from the exclusion list.
    rule_set = [
        {
            "info_types": info_types_to_locate,
            "rules": [
                {
                    "exclusion_rule": {
                        "dictionary": {"word_list": {"words": exclusion_list}},
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": info_types_to_locate,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Consulta la guida rapida di JSON per ulteriori informazioni sull'utilizzo dell'API DLP con JSON.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"EMAIL_ADDRESS"
        },
        {
          "name":"DOMAIN_NAME"
        },
        {
          "name":"PHONE_NUMBER"
        },
        {
          "name":"PERSON_NAME"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"EMAIL_ADDRESS"
            },
            {
              "name":"DOMAIN_NAME"
            },
            {
              "name":"PHONE_NUMBER"
            },
            {
              "name":"PERSON_NAME"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "dictionary":{
                  "wordList":{
                    "words":[
                      "TEST"
                    ]
                  }
                },
                "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Ometti le corrispondenze della scansione che includono la sottostringa "Jimmy" da una scansione del rilevatore infoType personalizzata

Il seguente snippet e codice JSON in diversi linguaggi illustra come indicare a Sensitive Data Protection utilizzando un InspectConfig che dovrebbe evitare la corrispondenza con il nome "Jimmy" in una scansione che utilizza il rilevatore regex personalizzato specificato:

Importante: il codice in questa pagina richiede prima la configurazione di un client Sensitive Data Protection. Per saperne di più sull'installazione e sulla creazione di un client Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection. (L'invio di JSON a endpoint REST di Sensitive Data Protection non richiede una libreria client.)

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

using System;
using System.Collections.Generic;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringCustomExcludingSubstring
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, string customDetectorPattern, List<String> excludedSubstringList)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteContentItem };

        var infoType = new InfoType
        {
            Name = "CUSTOM_NAME_DETECTOR"
        };
        var customInfoType = new CustomInfoType
        {
            InfoType = infoType,
            Regex = new CustomInfoType.Types.Regex { Pattern = customDetectorPattern }
        };

        var exclusionRule = new ExclusionRule
        {
            MatchingType = MatchingType.PartialMatch,
            Dictionary = new CustomInfoType.Types.Dictionary
            {
                WordList = new CustomInfoType.Types.Dictionary.Types.WordList
                {
                    Words = { excludedSubstringList }
                }
            }
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { infoType },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            CustomInfoTypes = { customInfoType },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringCustomExcludingSubstring inspects a string for sensitive data, excluding a custom substring
func inspectStringCustomExcludingSubstring(w io.Writer, projectID, textToInspect, customDetectorPattern string, excludedSubstringList []string) error {
	// projectId := "your-project-id"
	// textToInspect := "Name: Doe, John. Name: Example, Jimmy"
	// customDetectorPattern := "[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}"
	// excludedSubstringList := []string{"Jimmy"}

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	infoType := &dlppb.InfoType{
		Name: "CUSTOM_NAME_DETECTOR",
	}

	customInfotype := &dlppb.CustomInfoType{
		InfoType: infoType,
		Type: &dlppb.CustomInfoType_Regex_{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: customDetectorPattern,
			},
		},
	}

	// Exclude partial matches from the specified excludedSubstringList.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Dictionary{
			Dictionary: &dlppb.CustomInfoType_Dictionary{
				Source: &dlppb.CustomInfoType_Dictionary_WordList_{
					WordList: &dlppb.CustomInfoType_Dictionary_WordList{
						Words: excludedSubstringList,
					},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			infoType,
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			CustomInfoTypes: []*dlppb.CustomInfoType{
				customInfotype,
			},
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary.WordList;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.Arrays;
import java.util.List;

public class InspectStringCustomExcludingSubstring {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Name: Doe, John. Name: Example, Jimmy";
    String customDetectorPattern = "[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}";
    List<String> excludedSubstringList = Arrays.asList("Jimmy");
    inspectStringCustomExcludingSubstring(
        projectId, textToInspect, customDetectorPattern, excludedSubstringList);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringCustomExcludingSubstring(
      String projectId,
      String textToInspect,
      String customDetectorPattern,
      List<String> excludedSubstringList)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      InfoType infoType = InfoType.newBuilder().setName("CUSTOM_NAME_DETECTOR").build();
      CustomInfoType customInfoType =
          CustomInfoType.newBuilder()
              .setInfoType(infoType)
              .setRegex(Regex.newBuilder().setPattern(customDetectorPattern))
              .build();

      // Exclude partial matches from the specified excludedSubstringList.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .setDictionary(
                  Dictionary.newBuilder()
                      .setWordList(WordList.newBuilder().addAllWords(excludedSubstringList)))
              .build();

      // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(infoType)
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addCustomInfoTypes(customInfoType)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Name: Doe, John. Name: Example, Jimmy';

// Words to exclude
// const excludedWords = ['Jimmy'];

async function inspectStringCustomExclusionDict() {
  // Specify the content to be inspected.
  const item = {value: string};

  // Specify the type of info the inspection will look for.
  const customInfoTypes = [
    {
      infoType: {name: 'CUSTOM_NAME_DETECTOR'},
      regex: {pattern: '[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}'},
    },
  ];

  // Exclude partial matches from the specified excludedSubstringList.
  const exclusionRUle = {
    dictionary: {wordList: {words: excludedWords}},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // Construct a rule set that will only match if the match text does not
  // contains tokens from the exclusion list.
  const ruleSet = [
    {
      infoTypes: [{name: 'CUSTOM_NAME_DETECTOR'}],
      rules: [
        {
          exclusionRule: exclusionRUle,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    customInfoTypes: customInfoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringCustomExclusionDict();

PHP

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary\WordList;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, excluding a custom substring
 * Illustrates how to use an InspectConfig to instruct Cloud DLP to avoid matching on the name "Jimmy" in a scan that uses the specified custom regular expression detector.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_custom_excluding_substring(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Name: Doe, John. Name: Example, Jimmy'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();
    $customDetectorPattern = '[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}';

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $customerNameDetector = (new InfoType())
        ->setName('CUSTOM_NAME_DETECTOR');
    $customInfoType = (new CustomInfoType())
        ->setInfoType($customerNameDetector)
        ->setRegex((new Regex())
            ->setPattern($customDetectorPattern));

    // Exclude partial matches from the specified excludedSubstringList.
    $excludedSubstringList = (new Dictionary())
        ->setWordList((new WordList())
            ->setWords(['Jimmy']));

    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setDictionary($excludedSubstringList);

    // Construct a ruleset that applies the exclusion rule.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$customerNameDetector])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setCustomInfoTypes([$customInfoType])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

from typing import List

import google.cloud.dlp

def inspect_string_custom_excluding_substring(
    project: str, content_string: str, exclusion_list: List[str] = ["jimmy"]
) -> None:
    """Inspects the provided text with a custom detector, avoiding matches on specific tokens

    Uses the Data Loss Prevention API to omit matches on a custom detector
    if they include tokens in the specified exclusion list.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        exclusion_list: The list of strings to ignore matches on

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a custom regex detector for names
    custom_info_types = [
        {
            "info_type": {"name": "CUSTOM_NAME_DETECTOR"},
            "regex": {"pattern": "[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}"},
        }
    ]

    # Construct a rule set that will only match if the match text does not
    # contains tokens from the exclusion list.
    rule_set = [
        {
            "info_types": [{"name": "CUSTOM_NAME_DETECTOR"}],
            "rules": [
                {
                    "exclusion_rule": {
                        "dictionary": {"word_list": {"words": exclusion_list}},
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "custom_info_types": custom_info_types,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Consulta la guida rapida di JSON per ulteriori informazioni sull'utilizzo dell'API DLP con JSON.

...
    "inspectConfig":{
      "customInfoTypes":[
        {
          "infoType":{
            "name":"CUSTOM_NAME_DETECTOR"
          },
          "regex":{
            "pattern":"[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}"
          }
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"CUSTOM_NAME_DETECTOR"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "dictionary":{
                  "wordList":{
                    "words":[
                      "Jimmy"
                    ]
                  }
                },
                "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Ometti le corrispondenze di scansione da una scansione del rilevatore di PERSON_NAME che si sovrappongono a un rilevatore personalizzato

In questo scenario, l'utente non vuole una corrispondenza da una scansione di Sensitive Data Protection utilizzando il rilevatore integrato PERSON_NAME restituito se la corrispondenza verrebbe trovata anche in una scansione con il rilevatore di regex personalizzate definito nella prima parte dello snippet.

Il seguente snippet e codice JSON in diversi linguaggi specifica sia un rilevatore regex personalizzato e una regola di esclusione in InspectConfig. Il rilevatore di regex personalizzate specifica i nomi da escludere dai risultati. La regola di esclusione specifica che se i risultati restituiti da un'analisi per PERSON_NAME corrispondono anche al rilevatore di regex personalizzate, questi vengono omessi. Tieni presente che VIP_DETECTOR in questo caso è contrassegnato come EXCLUSION_TYPE_EXCLUDE, quindi non produrrà risultati. Influirà solo sui risultati prodotti dal rilevatore PERSON_NAME.

Importante: il codice in questa pagina richiede prima la configurazione di un client Sensitive Data Protection. Per saperne di più sull'installazione e sulla creazione di un client Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection. (L'invio di JSON a endpoint REST di Sensitive Data Protection non richiede una libreria client.)

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

using System;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectStringCustomOmitOverlap
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect)
    {
        var dlp = DlpServiceClient.Create();

        var byteItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteItem };

        var customInfoType = new CustomInfoType
        {
            InfoType = new InfoType { Name = "VIP_DETECTOR" },
            Regex = new CustomInfoType.Types.Regex { Pattern = "Larry Page|Sergey Brin" },
            ExclusionType = ExclusionType.Exclude
        };

        var exclusionRule = new ExclusionRule
        {
            ExcludeInfoTypes = new ExcludeInfoTypes { InfoTypes = { customInfoType.InfoType } },
            MatchingType = MatchingType.FullMatch
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "PERSON_NAME" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            InfoTypes = { new InfoType { Name = "PERSON_NAME" } },
            CustomInfoTypes = { customInfoType },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringCustomOmitOverlap inspects a string for sensitive data with omitting custom matches
func inspectStringCustomOmitOverlap(w io.Writer, projectID, textToInspect, customInfoTypeName, infoTypeName, regex string) error {
	// projectID := "my-project-id"
	// textToInspect := "Name: Jane Doe. Name: Larry Page."
	// customInfoTypeName := "VIP_DETECTOR"
	// infoTypeName := "PERSON_NAME"
	// regex := "Larry Page|Sergey Brin"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}
	// Construct the custom infoType.
	customInfotype := &dlppb.CustomInfoType{
		InfoType: &dlppb.InfoType{
			Name: customInfoTypeName,
		},
		Type: &dlppb.CustomInfoType_Regex_{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: regex,
			},
		},
		ExclusionType: dlppb.CustomInfoType_EXCLUSION_TYPE_EXCLUDE,
	}

	// Exclude matches that also match the custom infoType.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_ExcludeInfoTypes{
			ExcludeInfoTypes: &dlppb.ExcludeInfoTypes{
				InfoTypes: []*dlppb.InfoType{
					customInfotype.GetInfoType(),
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_FULL_MATCH,
	}

	// Construct a ruleSet that applies the exclusion rule to the PERSON_NAME infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: infoTypeName},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the configuration for the Inspect request, including the ruleSet.
	config := &dlppb.InspectConfig{
		InfoTypes: []*dlppb.InfoType{
			{Name: infoTypeName},
		},
		CustomInfoTypes: []*dlppb.CustomInfoType{
			customInfotype,
		},
		IncludeQuote: true,
		RuleSet: []*dlppb.InspectionRuleSet{
			ruleSet,
		},
	}

	// Create a configured request.
	req := &dlppb.InspectContentRequest{
		Parent:        fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:          contentItem,
		InspectConfig: config,
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Parse the response and process results
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.CustomInfoType.ExclusionType;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.ExcludeInfoTypes;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;

public class InspectStringCustomOmitOverlap {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Name: Jane Doe. Name: Larry Page.";
    inspectStringCustomOmitOverlap(projectId, textToInspect);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringCustomOmitOverlap(String projectId, String textToInspect)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Construct the custom infotype.
      CustomInfoType customInfoType =
          CustomInfoType.newBuilder()
              .setInfoType(InfoType.newBuilder().setName("VIP_DETECTOR"))
              .setRegex(Regex.newBuilder().setPattern("Larry Page|Sergey Brin"))
              .setExclusionType(ExclusionType.EXCLUSION_TYPE_EXCLUDE)
              .build();

      // Exclude matches that also match the custom infotype.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setExcludeInfoTypes(
                  ExcludeInfoTypes.newBuilder().addInfoTypes(customInfoType.getInfoType()))
              .setMatchingType(MatchingType.MATCHING_TYPE_FULL_MATCH)
              .build();

      // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .addCustomInfoTypes(customInfoType)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Name: Jane Doe. Name: Larry Page.';

async function inspectStringCustomOmitOverlap() {
  // Construct item to inspect
  const item = {value: string};

  // Construct a custom regex detector for names
  const customInfoTypes = [
    {
      infoType: {name: 'VIP_DETECTOR'},
      regex: {pattern: 'Larry Page|Sergey Brin'},
      exclusionType:
        DLP.protos.google.privacy.dlp.v2.CustomInfoType.ExclusionType
          .EXCLUSION_TYPE_EXCLUDE,
    },
  ];

  // Construct a exclusion rule
  const exclusionRule = {
    excludeInfoTypes: {
      infoTypes: [{name: 'VIP_DETECTOR'}],
    },
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
  };

  // Construct a rule set that will only match if the match text does not
  // contains Info type matches.
  const ruleSet = [
    {
      infoTypes: [{name: 'PERSON_NAME'}],
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the inspect configuration
  const inspectConfig = {
    infoTypes: [{name: 'PERSON_NAME'}],
    customInfoTypes: customInfoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Combine configurations into a request for the service.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);

  // Print Findings
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringCustomOmitOverlap();

PHP

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType;
use Google\Cloud\Dlp\V2\CustomInfoType\ExclusionType;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\ExcludeInfoTypes;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, omitting custom matches
 * Omit scan matches from a PERSON_NAME detector scan that overlap with a custom detector.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_custom_omit_overlap(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Name: Jane Doe. Name: Larry Page.'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $vipDetector = (new InfoType())
        ->setName('VIP_DETECTOR');
    $pattern = 'Larry Page|Sergey Brin';
    $customInfoType = (new CustomInfoType())
        ->setInfoType($vipDetector)
        ->setRegex((new Regex())
            ->setPattern($pattern))
        ->setExclusionType(ExclusionType::EXCLUSION_TYPE_EXCLUDE);

    // Exclude matches that also match the custom infotype.
    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_FULL_MATCH)
        ->setExcludeInfoTypes((new ExcludeInfoTypes())
                ->setInfoTypes([$customInfoType->getInfoType()])
        );

    // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
    $personName = (new InfoType())
        ->setName('PERSON_NAME');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$personName])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes([$personName])
        ->setCustomInfoTypes([$customInfoType])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import google.cloud.dlp

def inspect_string_custom_omit_overlap(project: str, content_string: str) -> None:
    """Matches PERSON_NAME and a custom detector,
    but if they overlap only matches the custom detector

    Uses the Data Loss Prevention API to omit matches on a built-in detector
    if they overlap with matches from a custom detector

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a custom regex detector for names
    custom_info_types = [
        {
            "info_type": {"name": "VIP_DETECTOR"},
            "regex": {"pattern": "Larry Page|Sergey Brin"},
            "exclusion_type": google.cloud.dlp_v2.CustomInfoType.ExclusionType.EXCLUSION_TYPE_EXCLUDE,
        }
    ]

    # Construct a rule set that will exclude PERSON_NAME matches
    # that overlap with VIP_DETECTOR matches
    rule_set = [
        {
            "info_types": [{"name": "PERSON_NAME"}],
            "rules": [
                {
                    "exclusion_rule": {
                        "exclude_info_types": {
                            "info_types": [{"name": "VIP_DETECTOR"}]
                        },
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": [{"name": "PERSON_NAME"}],
        "custom_info_types": custom_info_types,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Consulta la guida rapida di JSON per ulteriori informazioni sull'utilizzo dell'API DLP con JSON.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"PERSON_NAME"
        }
      ],
      "customInfoTypes":[
        {
          "infoType":{
            "name":"VIP_DETECTOR"
          },
          "regex":{
            "pattern":"Dana Williams|Quinn Garcia"
          },
          "exclusionType":"EXCLUSION_TYPE_EXCLUDE"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"PERSON_NAME"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "excludeInfoTypes":{
                  "infoTypes":[
                    {
                      "name":"VIP_DETECTOR"
                    }
                  ]
                },
                "matchingType": "MATCHING_TYPE_FULL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Ometti le corrispondenze nel rilevatore di PERSON_NAME se trova corrispondenze anche nel rilevatore EMAIL_ADDRESS

Il seguente snippet e codice JSON in diversi linguaggi illustra come indicare a Sensitive Data Protection utilizzando un InspectConfig che deve restituire una sola corrispondenza nel caso in cui corrisponda alla sovrapposizione del rilevatore PERSON_NAME con le corrispondenze per il rilevatore EMAIL_ADDRESS. In questo modo eviterai i casi in cui un indirizzo email come "[e-mail]" corrisponda a entrambi i rilevatori PERSON_NAME e EMAIL_ADDRESS.

Importante: il codice in questa pagina richiede prima la configurazione di un client Sensitive Data Protection. Per saperne di più sull'installazione e sulla creazione di un client Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection. (L'invio di JSON a endpoint REST di Sensitive Data Protection non richiede una libreria client.)

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

using System;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringOmitOverlap
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect)
    {
        // Initialize client that will be used to send requests. This client only needs to be created
        // once, and can be reused for multiple requests. After completing all of your requests, call
        // the "close" method on the client to safely clean up any remaining background resources.
        var dlp = DlpServiceClient.Create();

        // Specify the type and content to be inspected.
        var byteItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };
        var contentItem = new ContentItem { ByteItem = byteItem };

        // Specify the type of info the inspection will look for.
        // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
        var infoTypes = new string[] { "PERSON_NAME", "EMAIL_ADDRESS" }.Select(it => new InfoType { Name = it });

        // Exclude EMAIL_ADDRESS matches
        var exclusionRule = new ExclusionRule
        {
            ExcludeInfoTypes = new ExcludeInfoTypes { InfoTypes = { new InfoType { Name = "EMAIL_ADDRESS" } } },
            MatchingType = MatchingType.PartialMatch
        };

        // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
        // If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
        // be excluded.
        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "PERSON_NAME" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        // Construct the configuration for the Inspect request, including the ruleset.
        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        // Construct the Inspect request to be sent by the client.
        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        // Use the client to send the API request.
        var response = dlp.InspectContent(request);

        // Parse the response and process results
        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringOmitOverlap inspects a string for sensitive data and
// omitting overlapping matches on person and email
func inspectStringOmitOverlap(w io.Writer, projectID, textToInspect string) error {
	// projectID := "my-project-id"
	// textToInspect := "[e-mail]"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "PERSON_NAME"},
		{Name: "EMAIL_ADDRESS"},
	}

	// Exclude EMAIL_ADDRESS matches
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_ExcludeInfoTypes{
			ExcludeInfoTypes: &dlppb.ExcludeInfoTypes{
				InfoTypes: []*dlppb.InfoType{
					{Name: "EMAIL_ADDRESS"},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleSet that applies the exclusion rule to the PERSON_NAME infoType.
	// If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
	// be excluded.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "PERSON_NAME"},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes:    infoTypes,
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.ExcludeInfoTypes;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class InspectStringOmitOverlap {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "[e-mail]";
    inspectStringOmitOverlap(projectId, textToInspect);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringOmitOverlap(String projectId, String textToInspect)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName : new String[] {"PERSON_NAME", "EMAIL_ADDRESS"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Exclude EMAIL_ADDRESS matches
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setExcludeInfoTypes(
                  ExcludeInfoTypes.newBuilder()
                      .addInfoTypes(InfoType.newBuilder().setName("EMAIL_ADDRESS")))
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .build();

      // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
      // If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
      // be excluded.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = '[e-mail]';

async function inspectStringWithoutOverlapPersonEmail() {
  // Construct item to inspect
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Specify the type of info the inspection will look for.
  const infoTypes = [{name: 'PERSON_NAME'}, {name: 'EMAIL_ADDRESS'}];

  // Exclude EMAIL_ADDRESS matches
  const exclusionRule = {
    excludeInfoTypes: {
      infoTypes: [{name: 'EMAIL_ADDRESS'}],
    },
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
  // If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
  // be excluded.
  const ruleSet = [
    {
      infoTypes: [{name: 'PERSON_NAME'}],
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);

  // Print Findings
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringWithoutOverlapPersonEmail();

PHP

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\ExcludeInfoTypes;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, omitting overlapping matches on person and email
 * Omit matches on a PERSON_NAME detector if also matched by an EMAIL_ADDRESS detector.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_omit_overlap(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = '[e-mail] is an email.'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $personName = (new InfoType())
        ->setName('PERSON_NAME');
    $emailAddress = (new InfoType())
        ->setName('EMAIL_ADDRESS');
    $infoTypes = [$personName, $emailAddress];

    // Exclude EMAIL_ADDRESS matches
    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setExcludeInfoTypes((new ExcludeInfoTypes())
                ->setInfoTypes([$emailAddress])
        );

    // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
    // If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
    // be excluded.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$personName])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infoTypes)
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import google.cloud.dlp

def inspect_string_omit_overlap(
    project: str,
    content_string: str,
) -> None:
    """Matches PERSON_NAME and EMAIL_ADDRESS, but not both.

    Uses the Data Loss Prevention API omit matches on PERSON_NAME if the
    EMAIL_ADDRESS detector also matches.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "PERSON_NAME"}, {"name": "EMAIL_ADDRESS"}]

    # Construct the configuration dictionary that will only match on PERSON_NAME
    # if the EMAIL_ADDRESS doesn't also match. This configuration helps reduce
    # the total number of findings when there is a large overlap between different
    # infoTypes.
    inspect_config = {
        "info_types": info_types_to_locate,
        "rule_set": [
            {
                "info_types": [{"name": "PERSON_NAME"}],
                "rules": [
                    {
                        "exclusion_rule": {
                            "exclude_info_types": {
                                "info_types": [{"name": "EMAIL_ADDRESS"}]
                            },
                            "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
                        }
                    }
                ],
            }
        ],
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Consulta la guida rapida di JSON per ulteriori informazioni sull'utilizzo dell'API DLP con JSON.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"PERSON_NAME"
        },
        {
          "name":"EMAIL_ADDRESS"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"PERSON_NAME"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "excludeInfoTypes":{
                  "infoTypes":[
                    {
                      "name":"EMAIL_ADDRESS"
                    }
                  ]
                },
                "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Ometti le corrispondenze per i nomi di dominio che fanno parte degli indirizzi email in una scansione del rilevatore diDOMAIN_NAME

Il seguente snippet e codice JSON in diversi linguaggi illustra come indicare a Sensitive Data Protection utilizzando un InspectConfig che deve restituire corrispondenze per una scansione del rilevatore DOMAIN_NAME se la corrispondenza non si sovrappone a una corrispondenza in una scansione del rilevatore EMAIL_ADDRESS. In questo scenario, la scansione principale è una scansione del rilevatore DOMAIN_NAME. L'utente non vuole che venga restituita una corrispondenza del nome di dominio nei risultati se il nome di dominio viene utilizzato in un indirizzo email:

Importante: il codice in questa pagina richiede prima la configurazione di un client Sensitive Data Protection. Per saperne di più sull'installazione e sulla creazione di un client Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection. (L'invio di JSON a endpoint REST di Sensitive Data Protection non richiede una libreria client.)

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectStringWithoutOverlap
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect)
    {
        // Initialize client that will be used to send requests. This client only needs to be created
        // once, and can be reused for multiple requests. After completing all of your requests, call
        // the "close" method on the client to safely clean up any remaining background resources.
        var dlp = DlpServiceClient.Create();

        // Specify the type and content to be inspected.
        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };
        var contentItem = new ContentItem
        {
            ByteItem = byteContentItem
        };

        // Specify the type of info the inspection will look for.
        // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
        var infoTypes = new string[] { "DOMAIN_NAME", "EMAIL_ADDRESS" }.Select(it => new InfoType { Name = it });

        // Define a custom info type to exclude email addresses
        var customInfoType = new CustomInfoType
        {
            InfoType = new InfoType { Name = "EMAIL_ADDRESS" },
            ExclusionType = ExclusionType.Exclude
        };

        // Exclude EMAIL_ADDRESS matches
        var exclusionRule = new ExclusionRule
        {
            ExcludeInfoTypes = new ExcludeInfoTypes
            {
                InfoTypes = { new InfoType { Name = "EMAIL_ADDRESS" } }
            },
            MatchingType = MatchingType.PartialMatch
        };

        // Construct a ruleset that applies the exclusion rule to the DOMAIN_NAME infotype.
        // If a DOMAIN_NAME match is part of an EMAIL_ADDRESS match, the DOMAIN_NAME match will
        // be excluded.
        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "DOMAIN_NAME" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        // Construct the configuration for the Inspect request, including the ruleset.
        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            CustomInfoTypes = { customInfoType },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        // Construct the Inspect request to be sent by the client.
        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        // Use the client to send the API request.
        var response = dlp.InspectContent(request);

        return response;
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringWithoutOverlap inspects a string for sensitive data
// and omit overlapping matches on domain and email
func inspectStringWithoutOverlap(w io.Writer, projectID, textToInspect string) error {
	// projectID := "my-project-id"
	// textToInspect := "example.com is a domain, [e-mail] is an email."

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "DOMAIN_NAME"},
		{Name: "EMAIL_ADDRESS"},
	}

	// Define a custom info type to exclude email addresses
	customInfotype := &dlppb.CustomInfoType{
		InfoType: &dlppb.InfoType{
			Name: "EMAIL_ADDRESS",
		},
		ExclusionType: dlppb.CustomInfoType_EXCLUSION_TYPE_EXCLUDE,
	}

	// Exclude EMAIL_ADDRESS matches
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_ExcludeInfoTypes{
			ExcludeInfoTypes: &dlppb.ExcludeInfoTypes{
				InfoTypes: []*dlppb.InfoType{
					{Name: "EMAIL_ADDRESS"},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleSet that applies the exclusion rule to the DOMAIN_NAME infoType.
	// If a DOMAIN_NAME match is part of an EMAIL_ADDRESS match, the DOMAIN_NAME match will
	// be excluded.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "DOMAIN_NAME"},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		// Construct the Inspect request to be sent by the client.
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes: infoTypes,
			CustomInfoTypes: []*dlppb.CustomInfoType{
				customInfotype,
			},
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.CustomInfoType.ExclusionType;
import com.google.privacy.dlp.v2.ExcludeInfoTypes;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class InspectStringWithoutOverlap {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "example.com is a domain, [e-mail] is an email.";
    inspectStringWithoutOverlap(projectId, textToInspect);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringWithoutOverlap(String projectId, String textToInspect)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName : new String[] {"DOMAIN_NAME", "EMAIL_ADDRESS"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Define a custom info type to exclude email addresses
      CustomInfoType customInfoType =
          CustomInfoType.newBuilder()
              .setInfoType(InfoType.newBuilder().setName("EMAIL_ADDRESS"))
              .setExclusionType(ExclusionType.EXCLUSION_TYPE_EXCLUDE)
              .build();

      // Exclude EMAIL_ADDRESS matches
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setExcludeInfoTypes(
                  ExcludeInfoTypes.newBuilder()
                      .addInfoTypes(InfoType.newBuilder().setName("EMAIL_ADDRESS")))
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .build();

      // Construct a ruleset that applies the exclusion rule to the DOMAIN_NAME infotype.
      // If a DOMAIN_NAME match is part of an EMAIL_ADDRESS match, the DOMAIN_NAME match will
      // be excluded.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("DOMAIN_NAME"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .addCustomInfoTypes(customInfoType)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'example.com is a domain, [e-mail] is an email.';

async function inspectStringWithoutOverlap() {
  // Construct item to inspect
  const item = {value: string};

  // The infoTypes of information to match
  const infoTypes = [{name: 'DOMAIN_NAME'}, {name: 'EMAIL_ADDRESS'}];

  // Define a custom info type to exclude email addresses
  const customInfoTypes = [
    {
      infoType: {name: 'EMAIL_ADDRESS'},
      exclusionType:
        DLP.protos.google.privacy.dlp.v2.CustomInfoType.ExclusionType
          .EXCLUSION_TYPE_EXCLUDE,
    },
  ];

  // Construct a exclusion rule
  const exclusionRule = {
    excludeInfoTypes: {
      infoTypes: [{name: 'EMAIL_ADDRESS'}],
    },
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // Construct a rule set with exclusions
  const ruleSet = [
    {
      infoTypes: [{name: 'DOMAIN_NAME'}],
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the inspect configuration
  const inspectConfig = {
    infoTypes: infoTypes,
    customInfoTypes: customInfoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Combine configurations into a request for the service.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);

  // Print Findings
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringWithoutOverlap();

PHP

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType;
use Google\Cloud\Dlp\V2\CustomInfoType\ExclusionType;
use Google\Cloud\Dlp\V2\ExcludeInfoTypes;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, omitting overlapping matches on domain and email
 * Omit matches on domain names that are part of email addresses in a DOMAIN_NAME detector scan.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_without_overlap(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'example.com is a domain, [e-mail] is an email.'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $domainName = (new InfoType())
        ->setName('DOMAIN_NAME');
    $emailAddress = (new InfoType())
        ->setName('EMAIL_ADDRESS');
    $infoTypes = [$domainName, $emailAddress];

    // Define a custom info type to exclude email addresses
    $customInfoType = (new CustomInfoType())
        ->setInfoType($emailAddress)
        ->setExclusionType(ExclusionType::EXCLUSION_TYPE_EXCLUDE);

    // Exclude EMAIL_ADDRESS matches
    $matchingType = MatchingType::MATCHING_TYPE_PARTIAL_MATCH;

    $exclusionRule = (new ExclusionRule())
        ->setMatchingType($matchingType)
        ->setExcludeInfoTypes((new ExcludeInfoTypes())
            ->setInfoTypes([$customInfoType->getInfoType()])
        );

    // Construct a ruleset that applies the exclusion rule to the DOMAIN_NAME infotype.
    // If a DOMAIN_NAME match is part of an EMAIL_ADDRESS match, the DOMAIN_NAME match will
    // be excluded.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$domainName])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infoTypes)
        ->setCustomInfoTypes([$customInfoType])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf(
                '  Likelihood: %s' . PHP_EOL,
                Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import google.cloud.dlp

def inspect_string_without_overlap(project: str, content_string: str) -> None:
    """Matches EMAIL_ADDRESS and DOMAIN_NAME, but DOMAIN_NAME is omitted
    if it overlaps with EMAIL_ADDRESS

    Uses the Data Loss Prevention API to omit matches of one infotype
    that overlap with another.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "DOMAIN_NAME"}, {"name": "EMAIL_ADDRESS"}]

    # Define a custom info type to exclude email addresses
    custom_info_types = [
        {
            "info_type": {"name": "EMAIL_ADDRESS"},
            "exclusion_type": google.cloud.dlp_v2.CustomInfoType.ExclusionType.EXCLUSION_TYPE_EXCLUDE,
        }
    ]

    # Construct a rule set that will exclude DOMAIN_NAME matches
    # that overlap with EMAIL_ADDRESS matches
    rule_set = [
        {
            "info_types": [{"name": "DOMAIN_NAME"}],
            "rules": [
                {
                    "exclusion_rule": {
                        "exclude_info_types": {
                            "info_types": [{"name": "EMAIL_ADDRESS"}]
                        },
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": info_types_to_locate,
        "custom_info_types": custom_info_types,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Consulta la guida rapida di JSON per ulteriori informazioni sull'utilizzo dell'API DLP con JSON.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"DOMAIN_NAME"
        },
        {
          "name":"EMAIL_ADDRESS"
        }
      ],
      "customInfoTypes":[
        {
          "infoType":{
            "name":"EMAIL_ADDRESS"
          },
          "exclusionType":"EXCLUSION_TYPE_EXCLUDE"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"DOMAIN_NAME"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "excludeInfoTypes":{
                  "infoTypes":[
                    {
                      "name":"EMAIL_ADDRESS"
                    }
                  ]
                },
                "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Ometti le corrispondenze se si trovano vicino a una stringa

L'esempio seguente illustra come escludere le corrispondenze nel rilevatore di infoType US_SOCIAL_SECURITY_NUMBER se la parola "SKU" contiene meno di 10 caratteri prima o 10 caratteri dopo il risultato.

A causa della regola di esclusione, questo esempio non classifica 222-22-2222 come possibile numero di previdenza sociale degli Stati Uniti.

{
  "item": {
    "value": "The customer sent the product SKU 222-22-2222"
  },
  "inspectConfig": {
    "infoTypes": [
      {
        "name": "US_SOCIAL_SECURITY_NUMBER"
      }
    ],
    "ruleSet": [
      {
        "infoTypes": [
          {
            "name": "US_SOCIAL_SECURITY_NUMBER"
          }
        ],
        "rules": [
          {
            "exclusionRule": {
              "excludeByHotword": {
                "hotwordRegex": {
                  "pattern": "(SKU)"
                },
                "proximity": {
                  "windowBefore": 10,
                  "windowAfter": 10
                }
              },
              "matchingType": "MATCHING_TYPE_FULL_MATCH"
            }
          }
        ]
      }
    ],
    "includeQuote": true
  }
}

Ometti i risultati in un'intera colonna di dati

L'esempio seguente illustra come escludere i risultati in un'intera colonna di dati tabulari se il nome di quella colonna corrisponde a un'espressione regolare. In questo caso, qualsiasi risultato corrispondente al rilevatore di infoType US_SOCIAL_SECURITY_NUMBER viene escluso dai risultati se questo risultato si trova nella colonna Numero di previdenza sociale falso.

Questo esempio restituisce solo 222-22-2222, perché 111-11-1111 si trova nella colonna Numero di previdenza sociale falso.

{
  "item": {
    "table": {
      "headers": [
        {
          "name": "Fake Social Security Number"
        },
        {
          "name": "Real Social Security Number"
        }
      ],
      "rows": [
        {
          "values": [
            {
              "stringValue": "111-11-1111"
            },
            {
              "stringValue": "222-22-2222"
            }
          ]
        }
      ]
    }
  },
  "inspectConfig": {
    "infoTypes": [
      {
        "name": "US_SOCIAL_SECURITY_NUMBER"
      }
    ],
    "includeQuote": true,
    "ruleSet": [
      {
        "infoTypes": [
          {
            "name": "US_SOCIAL_SECURITY_NUMBER"
          }
        ],
        "rules": [
          {
            "exclusionRule": {
              "excludeByHotword": {
                "hotwordRegex": {
                  "pattern": "(Fake Social Security Number)"
                },
                "proximity": {
                  "windowBefore": 1
                }
              },
              "matchingType": "MATCHING_TYPE_FULL_MATCH"
            }
          }
        ]
      }
    ],
    "minLikelihood": "POSSIBLE"
  }
}

Regole hotword

Le regole hotword sono utili in situazioni come le seguenti:

• Vuoi modificare i valori di probabilità assegnati alla scansione delle corrispondenze in base alla vicinanza della corrispondenza a una hotword. Ad esempio, vuoi impostare un valore di probabilità più alto per le corrispondenze con i nomi dei pazienti in base alla vicinanza dei nomi alla parola "paziente".
• Durante l'ispezione di dati tabulari strutturati, ti conviene modificare i valori di probabilità assegnati alle corrispondenze in base al nome di un'intestazione di colonna. Ad esempio, vuoi impostare un valore di probabilità più alto per US_SOCIAL_SECURITY_NUMBER quando trovati in una colonna con intestazione ACCOUNT_ID.

Panoramica dell'API Hotword Rules

All'interno dell'oggetto InspectionRule di Sensitive Data Protection, devi specificare un oggetto HotwordRule che regola la probabilità degli esiti entro una determinata vicinanza delle hotword.

InspectionRule oggetti sono raggruppati come "insieme di regole" in un oggetto InspectionRuleSet, insieme a un elenco di rilevatori infoType a cui si applica la serie di regole. Le regole all'interno di una serie di regole vengono applicate nell'ordine specificato.

Scenari di esempio di regole hotword

Lo snippet di codice riportato di seguito illustra come configurare Sensitive Data Protection per lo scenario specifico.

Aumenta la probabilità di una corrispondenza di PERSON_NAME se nelle vicinanze è presente la hotword "paziente"

Il seguente snippet e codice JSON in diversi linguaggi illustra l'utilizzo della proprietà InspectConfig allo scopo di analizzare un database medico al fine di individuare i nomi dei pazienti. Puoi utilizzare il rilevatore infoType PERSON_NAME integrato di Sensitive Data Protection, ma in questo modo Sensitive Data Protection troverà corrispondenze per tutti i nomi delle persone, non solo per i nomi dei pazienti. Per risolvere il problema, puoi includere una regola hotword che cerchi la parola "paziente" all'interno di una certa prossimità di un carattere dal primo carattere delle potenziali corrispondenze. Puoi quindi assegnare i risultati che corrispondono a questo pattern una probabilità di "molto probabile", poiché corrispondono ai tuoi criteri speciali. Se imposti il valore minimo Likelihood su VERY_LIKELY all'interno di InspectConfig, ti assicuri che nei risultati vengano restituite solo corrispondenze a questa configurazione.

Importante: il codice in questa pagina richiede prima la configurazione di un client Sensitive Data Protection. Per saperne di più sull'installazione e sulla creazione di un client Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection. (L'invio di JSON a endpoint REST di Sensitive Data Protection non richiede una libreria client.)

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using System;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectStringCustomHotword
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, string customHotword)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem
        {
            ByteItem = byteContentItem
        };

        var hotwordRule = new DetectionRule.Types.HotwordRule
        {
            HotwordRegex = new Regex { Pattern = customHotword },
            Proximity = new DetectionRule.Types.Proximity { WindowBefore = 50 },
            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment { FixedLikelihood = Likelihood.VeryLikely }
        };

        var infoType = new InfoType { Name = "PERSON_NAME" };

        var inspectionRuleSet = new InspectionRuleSet
        {
            InfoTypes = { infoType },
            Rules = { new InspectionRule { HotwordRule = hotwordRule } }
        };

        var inspectConfig = new InspectConfig
        {
            InfoTypes = { infoType },
            IncludeQuote = true,
            RuleSet = { inspectionRuleSet },
            MinLikelihood = Likelihood.VeryLikely
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = inspectConfig
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringCustomHotWord inspects a string from sensitive data by using a custom hot word
func inspectStringCustomHotWord(w io.Writer, projectID, textToInspect, customHotWord, infoTypeName string) error {
	// projectID := "my-project-id"
	// textToInspect := "patient name: John Doe"
	// customHotWord := "patient"
	// infoTypeName := "PERSON_NAME"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Increase likelihood of matches that have customHotword nearby
	hotwordRule := &dlppb.InspectionRule_HotwordRule{

		HotwordRule: &dlppb.CustomInfoType_DetectionRule_HotwordRule{
			HotwordRegex: &dlppb.CustomInfoType_Regex{
				Pattern: customHotWord,
			},
			Proximity: &dlppb.CustomInfoType_DetectionRule_Proximity{
				WindowBefore: 50,
			},
			LikelihoodAdjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
				Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
					FixedLikelihood: dlppb.Likelihood_VERY_LIKELY,
				},
			},
		},
	}

	// Construct a ruleset that applies the hotword rule to the PERSON_NAME infotype.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: infoTypeName}, //"PERSON_NAME"
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_HotwordRule{
					HotwordRule: hotwordRule.HotwordRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes: []*dlppb.InfoType{
				{Name: infoTypeName}, //"PERSON_NAME"
			},
			IncludeQuote:  true,
			MinLikelihood: dlppb.Likelihood_VERY_LIKELY,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Parse the response and process results
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.HotwordRule;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.LikelihoodAdjustment;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.Proximity;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.Likelihood;
import com.google.privacy.dlp.v2.LocationName;
import com.google.protobuf.ByteString;
import java.io.IOException;

public class InspectStringCustomHotword {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "patient name: John Doe";
    String customHotword = "patient";
    inspectStringCustomHotword(projectId, textToInspect, customHotword);
  }

  // Inspects the provided text.
  public static void inspectStringCustomHotword(
      String projectId, String textToInspect, String customHotword) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Increase likelihood of matches that have customHotword nearby
      HotwordRule hotwordRule =
          HotwordRule.newBuilder()
              .setHotwordRegex(Regex.newBuilder().setPattern(customHotword))
              .setProximity(Proximity.newBuilder().setWindowBefore(50))
              .setLikelihoodAdjustment(
                  LikelihoodAdjustment.newBuilder().setFixedLikelihood(Likelihood.VERY_LIKELY))
              .build();

      // Construct a ruleset that applies the hotword rule to the PERSON_NAME infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME").build())
              .addRules(InspectionRule.newBuilder().setHotwordRule(hotwordRule))
              .build();

      // Construct the configuration for the Inspect request.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME").build())
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .setMinLikelihood(Likelihood.VERY_LIKELY)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'patient name: John Doe';

// Custom hotward
// const customHotword = 'patient';

async function inspectStringCustomHotword() {
  // Specify the type and content to be inspected.
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Increase likelihood of matches that have customHotword nearby.
  const hotwordRule = {
    hotwordRegex: {
      pattern: customHotword,
    },
    proximity: {
      windowBefore: 50,
    },
    likelihoodAdjustment: {
      fixedLikelihood:
        DLP.protos.google.privacy.dlp.v2.Likelihood.VERY_LIKELY,
    },
  };

  // Construct a ruleset that applies the hotword rule to the PERSON_NAME infotype.
  const ruleSet = [
    {
      infoTypes: [{name: 'PERSON_NAME'}],
      rules: [
        {
          hotwordRule: hotwordRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request.
  const inspectConfig = {
    infoTypes: [{name: 'PERSON_NAME'}],
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringCustomHotword();

PHP

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\HotwordRule;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\LikelihoodAdjustment;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\Proximity;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;

/**
 * Inspect a string from sensitive data by using a custom hotword
 * Increase the likelihood of a PERSON_NAME match if there is the hotword "patient" nearby. Illustrates using the InspectConfig property for the purpose of scanning a medical database for patient names. You can use Cloud DLP's built-in PERSON_NAME infoType detector, but that causes Cloud DLP to match on all names of people, not just names of patients. To fix this, you can include a hotword rule that looks for the word "patient" within a certain character proximity from the first character of potential matches. You can then assign findings that match this pattern a likelihood of "very likely," since they correspond to your special criteria. Setting the minimum likelihood to VERY_LIKELY within InspectConfig ensures that only matches to this configuration are returned in findings.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_custom_hotword(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'patient name: John Doe'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Construct hotword rules
    $hotwordRule = (new HotwordRule())
        ->setHotwordRegex(
            (new Regex())
                ->setPattern('patient')
        )
        ->setProximity(
            (new Proximity())
                ->setWindowBefore(50)
        )
        ->setLikelihoodAdjustment(
            (new LikelihoodAdjustment())
                ->setFixedLikelihood(Likelihood::VERY_LIKELY)
        );

    // Construct a ruleset that applies the hotword rule to the PERSON_NAME infotype.
    $personName = (new InfoType())
        ->setName('PERSON_NAME');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$personName])
        ->setRules([
            (new InspectionRule())
                ->setHotwordRule($hotwordRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes([$personName])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet])
        ->setMinLikelihood(Likelihood::VERY_LIKELY);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import google.cloud.dlp

def inspect_string_w_custom_hotword(
    project: str, content_string: str, custom_hotword: str = "patient"
) -> None:
    """Uses the Data Loss Prevention API increase likelihood for matches on
       PERSON_NAME if the user specified custom hot-word is present. Only
       includes findings with the increased likelihood by setting a minimum
       likelihood threshold of VERY_LIKELY.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        custom_hotword: The custom hot-word used for likelihood boosting.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a rule set with caller provided hotword, with a likelihood
    # boost to VERY_LIKELY when the hotword are present within the 50 character-
    # window preceding the PII finding.
    hotword_rule = {
        "hotword_regex": {"pattern": custom_hotword},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.VERY_LIKELY
        },
        "proximity": {"window_before": 50},
    }

    rule_set = [
        {
            "info_types": [{"name": "PERSON_NAME"}],
            "rules": [{"hotword_rule": hotword_rule}],
        }
    ]

    # Construct the configuration dictionary with the custom regex info type.
    inspect_config = {
        "rule_set": rule_set,
        "min_likelihood": google.cloud.dlp_v2.Likelihood.VERY_LIKELY,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Consulta la guida rapida di JSON per ulteriori informazioni sull'utilizzo dell'API DLP con JSON.

...
  "inspectConfig":{
    "infoTypes":[
      {
        "name":"PERSON_NAME"
      }
    ],
    "ruleSet":[
      {
        "infoTypes":[
          {
            "name":"PERSON_NAME"
          }
        ],
        "rules":[
          {
            "hotwordRule":{
              "hotwordRegex":{
                "pattern":"patient"
              },
              "proximity":{
                "windowBefore":50
              },
              "likelihoodAdjustment":{
                "fixedLikelihood":"VERY_LIKELY"
              }
            }
          }
        ]
      }
    ],
    "minLikelihood":"VERY_LIKELY"
  }
...

Per informazioni più dettagliate sulle hotword, vedi Personalizzazione della probabilità di corrispondenza.

Scenario con più regole di ispezione

Il seguente snippet e codice JSON InspectConfig in diversi linguaggi illustra l'applicazione delle regole di esclusione e hotword. Il set di regole di questo snippet include sia regole per hotword sia regole di esclusione dizionari ed regex. Nota che le quattro regole sono specificate in un array all'interno dell'elemento rules.

Importante: il codice in questa pagina richiede prima la configurazione di un client Sensitive Data Protection. Per saperne di più sull'installazione e sulla creazione di un client Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection. (L'invio di JSON a endpoint REST di Sensitive Data Protection non richiede una libreria client.)

C#

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

using System;
using System.Text.RegularExpressions;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectStringMultipleRules
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem
        {
            ByteItem = byteContentItem
        };

        var patientRule = new DetectionRule.Types.HotwordRule
        {
            HotwordRegex = new CustomInfoType.Types.Regex { Pattern = "patient" },
            Proximity = new DetectionRule.Types.Proximity { WindowBefore = 10 },
            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment { FixedLikelihood = Likelihood.VeryLikely }
        };

        var doctorRule = new DetectionRule.Types.HotwordRule
        {
            HotwordRegex = new CustomInfoType.Types.Regex { Pattern = "doctor" },
            Proximity = new DetectionRule.Types.Proximity { WindowBefore = 10 },
            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment { FixedLikelihood = Likelihood.Unlikely }
        };

        // Construct exclusion rules
        var quasimodoRule = new ExclusionRule
        {
            Dictionary = new Dictionary { WordList = new Dictionary.Types.WordList { Words = { "Quasimodo" } } },
            MatchingType = MatchingType.PartialMatch
        };

        var redactedRule = new ExclusionRule
        {
            Regex = new CustomInfoType.Types.Regex { Pattern = "REDACTED" },
            MatchingType = MatchingType.PartialMatch
        };

        var infoType = new InfoType { Name = "PERSON_NAME" };

        var inspectionRuleSet = new InspectionRuleSet
        {
            InfoTypes = { infoType },
            Rules =
            {
                new InspectionRule { HotwordRule = patientRule },
                new InspectionRule { HotwordRule = doctorRule},
                new InspectionRule { ExclusionRule = quasimodoRule },
                new InspectionRule { ExclusionRule = redactedRule }
            }
        };

        var inspectConfig = new InspectConfig
        {
            InfoTypes = { infoType },
            IncludeQuote = true,
            RuleSet = { inspectionRuleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = inspectConfig
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringMultipleRules inspects the provided text,
// avoiding matches specified in the exclusion list.
// this function implements the both exclusion and hot word rules.
func inspectStringMultipleRules(w io.Writer, projectID, textToInspect string) error {
	// projectID := "my-project-id"
	// textToInspect := "patient: Jane Doe"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	ContentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Construct the rule that adjust the likelihood of findings
	// within a certain proximity of hot-word("patient").
	patientRule := &dlppb.InspectionRule_HotwordRule{
		HotwordRule: &dlppb.CustomInfoType_DetectionRule_HotwordRule{
			HotwordRegex: &dlppb.CustomInfoType_Regex{
				Pattern: "patient",
			},
			Proximity: &dlppb.CustomInfoType_DetectionRule_Proximity{
				WindowBefore: 10,
			},
			LikelihoodAdjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
				Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
					FixedLikelihood: dlppb.Likelihood_VERY_LIKELY,
				},
			},
		},
	}

	// Construct the rule that adjust the likelihood of findings
	// within a certain proximity of hot-word("doctor").
	doctorRule := &dlppb.InspectionRule_HotwordRule{
		HotwordRule: &dlppb.CustomInfoType_DetectionRule_HotwordRule{
			HotwordRegex: &dlppb.CustomInfoType_Regex{
				Pattern: "doctor",
			},
			Proximity: &dlppb.CustomInfoType_DetectionRule_Proximity{
				WindowBefore: 10,
			},
			LikelihoodAdjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
				Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
					FixedLikelihood: dlppb.Likelihood_UNLIKELY,
				},
			},
		},
	}

	// Construct the exclusion rule that avoids the matches for the specified word list.
	quasimodoRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Dictionary{
			Dictionary: &dlppb.CustomInfoType_Dictionary{
				Source: &dlppb.CustomInfoType_Dictionary_WordList_{
					WordList: &dlppb.CustomInfoType_Dictionary_WordList{
						Words: []string{"Quasimodo"},
					},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct the exclusion rule that avoids the matches for the specified regex pattern.
	redactedRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Regex{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: "REDACTED",
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleSet that applies the rules to the PERSON_NAME infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "PERSON_NAME"},
		},
		Rules: []*dlppb.InspectionRule{
			{Type: &dlppb.InspectionRule_HotwordRule{HotwordRule: doctorRule.HotwordRule}},
			{Type: &dlppb.InspectionRule_HotwordRule{HotwordRule: patientRule.HotwordRule}},
			{Type: &dlppb.InspectionRule_ExclusionRule{ExclusionRule: quasimodoRule}},
			{Type: &dlppb.InspectionRule_ExclusionRule{ExclusionRule: redactedRule}},
		},
	}

	// Construct the configuration for the Inspect request, including the ruleSet.
	inspectConfig := &dlppb.InspectConfig{
		InfoTypes: []*dlppb.InfoType{
			{Name: "PERSON_NAME"},
		},
		IncludeQuote: true,
		RuleSet: []*dlppb.InspectionRuleSet{
			ruleSet,
		},
	}

	// Create and send the request.
	req := &dlppb.InspectContentRequest{
		Parent:        fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:          ContentItem,
		InspectConfig: inspectConfig,
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.HotwordRule;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.LikelihoodAdjustment;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.Proximity;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary.WordList;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.Likelihood;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;

public class InspectStringMultipleRules {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "patient: Jane Doe";
    inspectStringMultipleRules(projectId, textToInspect);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringMultipleRules(String projectId, String textToInspect)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Construct hotword rules
      HotwordRule patientRule =
          HotwordRule.newBuilder()
              .setHotwordRegex(Regex.newBuilder().setPattern("patient"))
              .setProximity(Proximity.newBuilder().setWindowBefore(10))
              .setLikelihoodAdjustment(
                  LikelihoodAdjustment.newBuilder().setFixedLikelihood(Likelihood.VERY_LIKELY))
              .build();

      HotwordRule doctorRule =
          HotwordRule.newBuilder()
              .setHotwordRegex(Regex.newBuilder().setPattern("doctor"))
              .setProximity(Proximity.newBuilder().setWindowBefore(10))
              .setLikelihoodAdjustment(
                  LikelihoodAdjustment.newBuilder().setFixedLikelihood(Likelihood.UNLIKELY))
              .build();

      // Construct exclusion rules
      ExclusionRule quasimodoRule =
          ExclusionRule.newBuilder()
              .setDictionary(
                  Dictionary.newBuilder().setWordList(WordList.newBuilder().addWords("Quasimodo")))
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .build();

      ExclusionRule redactedRule =
          ExclusionRule.newBuilder()
              .setRegex(Regex.newBuilder().setPattern("REDACTED"))
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .build();

      // Construct a ruleset that applies the rules to the PERSON_NAME infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .addRules(InspectionRule.newBuilder().setHotwordRule(patientRule))
              .addRules(InspectionRule.newBuilder().setHotwordRule(doctorRule))
              .addRules(InspectionRule.newBuilder().setExclusionRule(quasimodoRule))
              .addRules(InspectionRule.newBuilder().setExclusionRule(redactedRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'patient: Jane Doe';

async function inspectStringMultipleRules() {
  // Construct item to inspect
  const item = {value: string};

  // Construct hotword rules
  const patientRule = {
    hotwordRegex: {pattern: 'patient'},
    proximity: {windowBefore: 10},
    likelihoodAdjustment: {
      fixedLikelihood:
        DLP.protos.google.privacy.dlp.v2.Likelihood.VERY_LIKELY,
    },
  };

  const doctorRule = {
    hotwordRegex: {pattern: 'doctor'},
    proximity: {windowBefore: 10},
    likelihoodAdjustment: {
      fixedLikelihood: DLP.protos.google.privacy.dlp.v2.Likelihood.UNLIKELY,
    },
  };

  // Construct exclusion rules
  const quasimodoRule = {
    dictionary: {wordList: {words: ['quasimodo']}},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  const redactedRule = {
    regex: {pattern: 'REDACTED'},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // The infoTypes of information to match
  const infoTypes = [{name: 'PERSON_NAME'}];

  // Construct a ruleset that applies the rules to the PERSON_NAME infotype.
  const ruleSet = [
    {
      infoTypes: infoTypes,
      rules: [
        {hotwordRule: patientRule},
        {hotwordRule: doctorRule},
        {exclusionRule: quasimodoRule},
        {exclusionRule: redactedRule},
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringMultipleRules();

PHP

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\HotwordRule;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\LikelihoodAdjustment;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\Proximity;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary\WordList;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data by using multiple rules
 * Illustrates applying both exclusion and hotword rules. This snippet's rule set includes both hotword rules and dictionary and regex exclusion rules. Notice that the four rules are specified in an array within the rules element.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_multiple_rules(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'patient: Jane Doe'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Construct hotword rules
    $patientRule = (new HotwordRule())
        ->setHotwordRegex((new Regex())
            ->setPattern('patient'))
        ->setProximity((new Proximity())
            ->setWindowBefore(10))
        ->setLikelihoodAdjustment((new LikelihoodAdjustment())
            ->setFixedLikelihood(Likelihood::VERY_LIKELY));

    $doctorRule = (new HotwordRule())
        ->setHotwordRegex((new Regex())
            ->setPattern('doctor'))
        ->setProximity((new Proximity())
            ->setWindowBefore(10))
        ->setLikelihoodAdjustment((new LikelihoodAdjustment())
            ->setFixedLikelihood(Likelihood::VERY_UNLIKELY));

    // Construct exclusion rules
    $wordList = (new Dictionary())
        ->setWordList((new WordList())
            ->setWords(['Quasimodo']));

    $quasimodoRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setDictionary($wordList);

    $redactedRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setRegex((new Regex())
            ->setPattern('REDACTED'));

    // Specify the exclusion rule and build-in info type the inspection will look for.
    $personName = (new InfoType())
        ->setName('PERSON_NAME');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$personName])
        ->setRules([
            (new InspectionRule())
                ->setHotwordRule($patientRule),
            (new InspectionRule())
                ->setHotwordRule($doctorRule),
            (new InspectionRule())
                ->setExclusionRule($quasimodoRule),
            (new InspectionRule())
                ->setExclusionRule($redactedRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes([$personName])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Per scoprire come installare e utilizzare la libreria client per Sensitive Data Protection, consulta Librerie client di Sensitive Data Protection.

Per eseguire l'autenticazione in Sensitive Data Protection, configura Credenziali predefinite dell'applicazione. Per maggiori informazioni, consulta Configurare l'autenticazione per un ambiente di sviluppo locale.

Visualizza su GitHub Feedback

import google.cloud.dlp

def inspect_string_multiple_rules(project: str, content_string: str) -> None:
    """Uses the Data Loss Prevention API to modify likelihood for matches on
       PERSON_NAME combining multiple hotword and exclusion rules.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct hotword rules
    patient_rule = {
        "hotword_regex": {"pattern": "patient"},
        "proximity": {"window_before": 10},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.VERY_LIKELY
        },
    }
    doctor_rule = {
        "hotword_regex": {"pattern": "doctor"},
        "proximity": {"window_before": 10},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.UNLIKELY
        },
    }

    # Construct exclusion rules
    quasimodo_rule = {
        "dictionary": {"word_list": {"words": ["quasimodo"]}},
        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
    }
    redacted_rule = {
        "regex": {"pattern": "REDACTED"},
        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
    }

    # Construct the rule set, combining the above rules
    rule_set = [
        {
            "info_types": [{"name": "PERSON_NAME"}],
            "rules": [
                {"hotword_rule": patient_rule},
                {"hotword_rule": doctor_rule},
                {"exclusion_rule": quasimodo_rule},
                {"exclusion_rule": redacted_rule},
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": [{"name": "PERSON_NAME"}],
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Consulta la guida rapida di JSON per ulteriori informazioni sull'utilizzo dell'API DLP con JSON.

...
  "inspectConfig":{
    "infoTypes":[
      {
        "name":"PERSON_NAME"
      }
    ],
    "ruleSet":[
      {
        "infoTypes":[
          {
            "name":"PERSON_NAME"
          }
        ],
        "rules":[
          {
            "hotwordRule":{
              "hotwordRegex":{
                "pattern":"patient"
              },
              "proximity":{
                "windowBefore":10
              },
              "likelihoodAdjustment":{
                "fixedLikelihood":"VERY_LIKELY"
              }
            }
          },
          {
            "hotwordRule":{
              "hotwordRegex":{
                "pattern":"doctor"
              },
              "proximity":{
                "windowBefore":10
              },
              "likelihoodAdjustment":{
                "fixedLikelihood":"UNLIKELY"
              }
            }
          },
          {
            "exclusionRule":{
              "dictionary":{
                "wordList":{
                  "words":[
                    "Quasimodo"
                  ]
                }
              },
              "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
            }
          },
          {
            "exclusionRule":{
              "regex":{
                "pattern":"REDACTED"
              },
              "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
            }
          }
        ]
      }
    ]
  }
...

Rilevatori di infoType sovrapposti

È possibile definire un rilevatore infoType personalizzato con lo stesso nome di un rilevatore infoType integrato. Come mostrato nell'esempio nella sezione "Scenari di esempio con regole hotword", quando crei un rilevatore di infoType personalizzato con lo stesso nome di un infoType integrato, tutti i risultati rilevati dal nuovo rilevatore di infoType vengono aggiunti a quelli rilevati da quest'ultimo. Questo è vero solo purché l'infoType integrato sia specificato nell'elenco di infoType nell'oggetto InspectConfig.

Quando crei nuovi rilevatori infoType personalizzati, testali a fondo sui contenuti di esempio per assicurarti che funzionino come previsto.