Distributed Cloud connected version 1.6.1

For version information, see the Distributed Cloud connected release notes.

Available versions: 1.7.1 1.7.0 1.6.1 1.6.0 1.5.1

Network Function operator

This page describes the specialized Network Function Kubernetes operator that Google Distributed Cloud connected ships with. This operator implements a set of CustomResourceDefinitions (CRDs) that allow Distributed Cloud connected to execute high-performance workloads.

Network Function operator and SR-IOV functionality is not available on Distributed Cloud connected servers.

The Network Function operator lets you do the following:

Poll for existing network devices on a node.
Query the IP address and physical link state for each network device on a node.
Provision additional network interfaces on a node.
Configure low-level system features on the node's physical machine required to support high-performance workloads.
Use single-root input/output virtualization (SR-IOV) on PCI Express network interfaces to virtualize them into multiple virtual interfaces. You can then configure your Distributed Cloud connected workloads to use those virtual network interfaces.

Distributed Cloud connected support for SR-IOV is based on the following open source projects:

Prerequisites

The Network Function operator fetches network configuration from the Distributed Cloud Edge Network API. To allow this, you must grant the Network Function operator service account the Edge Network Viewer role (roles/edgenetwork.viewer) using the following command:

gcloud projects add-iam-policy-binding PROJECT_ID \
  --role roles/edgenetwork.viewer \
  --member "serviceAccount:PROJECT_ID.svc.id.goog[nf-operator/nf-angautomator-sa]"

Replace PROJECT_ID with the ID of the target Google Cloud project.

Network Function operator resources

The Distributed Cloud connected Network Function operator implements the following Kubernetes CRDs:

Network. Defines a virtual network that Pods can use to communicate with internal and external resources. You must create the corresponding VLAN using the Distributed Cloud Edge Network API before specifying it in this resource. For instructions, see Create a network.
NetworkInterfaceState. Enables the discovery of network interface states and querying a network interface for link state and IP address.
NodeSystemConfigUpdate. Enables the configuration of low-level system features such as kernel options and Kubelet flags.
SriovNetworkNodePolicy. Selects a group of SR-IOV virtualized network interfaces and instantiates the group as a Kubernetes resource. You can use this resource in a NetworkAttachmentDefinition resource.
SriovNetworkNodeState. Lets you query the provisioning state of the SriovNetworkNodePolicy resource on a Distributed Cloud node.
NetworkAttachmentDefinition. Lets you attach Distributed Cloud Pods to one or more logical or physical networks on your Distributed Cloud connected node. You must create the corresponding VLAN using the Distributed Cloud Edge Network API before specifying it in this resource. For instructions, see Create a network.

The Network Function operator also lets you define secondary network interfaces that do not use SR-IOV virtual functions.

`Network` resource

The Network resource defines a virtual network within the Distributed Cloud connected rack that Pods within your Distributed Cloud connected cluster can use to communicate with internal and external resources.

The Network resource provides the following configurable parameters for the network interface exposed as writable fields:

spec.type: specifies the network transport layer for this network. The only valid value is L2. You must also specify a nodeInterfaceMatcher.interfaceName value.
spec.nodeInterfaceMatcher.interfaceName: the name of the physical network interface on the target Distributed Cloud connected node to use with this network.
spec.gateway4: the IP address of the network gateway for this network.
spec.l2NetworkConfig.prefixLength4: specifies the CIDR range for this network.

The following example illustrates the structure of the resource:

apiVersion: networking.gke.io/v1
kind: Network
metadata:
  name: vlan200-network
  annotations:
    networking.gke.io/gdce-vlan-id: 200
    networking.gke.io/gdce-vlan-mtu: 1500
spec:
  type: L2
  nodeInterfaceMatcher:
    interfaceName: gdcenet0.200
  gateway4: 10.53.0.1

`NetworkInterfaceState` resource

The NetworkInterfaceState resource is a read-only resource that lets you discover physical network interfaces on the node and collect runtime statistics on the network traffic flowing through those interfaces. Distributed Cloud creates a NetworkInterfaceState resource for each node in a cluster.

The default configuration of Distributed Cloud connected machines includes a bonded network interface on the Rack Select Network Daughter Card (rNDC) named gdcenet0. This interface bonds the eno1np0 and eno2np1 network interfaces. Each of those is connected to one Distributed Cloud ToR switch, respectively.

The NetworkInterfaceState resource provides the following categories of network interface information exposed as read-only status fields.

General information:

status.interfaces.ifname: the name of the target network interface.
status.lastReportTime: the time and date of the last status report for the target interface.

IP address configuration information:

status.interfaces.interfaceinfo.address: the IP address assigned to the target interface.
status.interfaces.interfaceinfo.dns: the IP address of the DNS server assigned to the target interface.
status.interfaces.interfaceinfo.gateway: the IP address of the network gateway serving the target interface.
status.interfaces.interfaceinfo.prefixlen: the length of the IP prefix.

Hardware information:

status.interfaces.linkinfo.broadcast: the broadcast MAC address of the target interface.
status.interfaces.linkinfo.businfo: the PCIe device path in bus:slot.function format.
status.interfaces.linkinfo.flags: the interface flags—for example, BROADCAST.
status.interfaces.linkinfo.macAddress: the Unicast MAC address of the target interface.
status.interfaces.linkinfo.mtu: the MTU value for the target interface.

Reception statistics:

status.interfaces.statistics.rx.bytes: the total bytes received by the target interface.
status.interfaces.statistics.rx.dropped: the total packets dropped by the target interface.
status.interfaces.statistics.rx.errors: the total packet receive errors for the target interface.
status.interfaces.statistics.rx.multicast: the total multicast packets received by the target interface.
status.interfaces.statistics.rx.overErrors: the total packet receive over errors for the target interface.
status.interfaces.statistics.rx.packets: the total packets received by the target interface.

Transmission statistics:

status.interfaces.statistics.tx.bytes: the total bytes transmitted by the target interface.
status.interfaces.statistics.tx.carrierErrors: the total carrier errors encountered by the target interface.
status.interfaces.statistics.tx.collisions: the total packet collisions encountered by the target interface.
status.interfaces.statistics.tx.dropped: the total packets dropped by the target interface.
status.interfaces.statistics.tx.errors: the total transmission errors for the target interface.
status.interfaces.statistics.tx.packets: the total packets transmitted by the target interface.

The following example illustrates the structure of the resource:

apiVersion: networking.gke.io/v1
kind: NetworkInterfaceState
metadata:
  name: MyNode1
nodeName: MyNode1
status:
  interfaces:
  - ifname: eno1np0
    linkinfo:
      businfo: 0000:1a:00.0
      flags: up|broadcast|multicast
      macAddress: ba:16:03:9e:9c:87
      mtu: 9000
    statistics:
      rx:
        bytes: 1098522811
        errors: 2
        multicast: 190926
        packets: 4988200
      tx:
        bytes: 62157709961
        packets: 169847139
  - ifname: eno2np1
    linkinfo:
      businfo: 0000:1a:00.1
      flags: up|broadcast|multicast
      macAddress: ba:16:03:9e:9c:87
      mtu: 9000
    statistics:
      rx:
        bytes: 33061895405
        multicast: 110203
        packets: 110447356
      tx:
        bytes: 2370516278
        packets: 11324730
  - ifname: enp95s0f0np0
    interfaceinfo:
    - address: fe80::63f:72ff:fec4:2bf4
      prefixlen: 64
    linkinfo:
      businfo: 0000:5f:00.0
      flags: up|broadcast|multicast
      macAddress: 04:3f:72:c4:2b:f4
      mtu: 9000
    statistics:
      rx:
        bytes: 37858381
        multicast: 205645
        packets: 205645
      tx:
        bytes: 1207334
        packets: 6542
  - ifname: enp95s0f1np1
    interfaceinfo:
    - address: fe80::63f:72ff:fec4:2bf5
      prefixlen: 64
    linkinfo:
      businfo: 0000:5f:00.1
      flags: up|broadcast|multicast
      macAddress: 04:3f:72:c4:2b:f5
      mtu: 9000
    statistics:
      rx:
        bytes: 37852406
        multicast: 205607
        packets: 205607
      tx:
        bytes: 1207872
        packets: 6545
  - ifname: enp134s0f0np0
    interfaceinfo:
    - address: fe80::63f:72ff:fec4:2b6c
      prefixlen: 64
    linkinfo:
      businfo: 0000:86:00.0
      flags: up|broadcast|multicast
      macAddress: 04:3f:72:c4:2b:6c
      mtu: 9000
    statistics:
      rx:
        bytes: 37988773
        multicast: 205584
        packets: 205584
      tx:
        bytes: 1212385
        packets: 6546
  - ifname: enp134s0f1np1
    interfaceinfo:
    - address: fe80::63f:72ff:fec4:2b6d
      prefixlen: 64
    linkinfo:
      businfo: 0000:86:00.1
      flags: up|broadcast|multicast
      macAddress: 04:3f:72:c4:2b:6d
      mtu: 9000
    statistics:
      rx:
        bytes: 37980702
        multicast: 205548
        packets: 205548
      tx:
        bytes: 1212297
        packets: 6548
  - ifname: gdcenet0
    interfaceinfo:
    - address: 208.117.254.36
      prefixlen: 28
    - address: fe80::b816:3ff:fe9e:9c87
      prefixlen: 64
    linkinfo:
      flags: up|broadcast|multicast
      macAddress: ba:16:03:9e:9c:87
      mtu: 9000
    statistics:
      rx:
        bytes: 34160422968
        errors: 2
        multicast: 301129
        packets: 115435591
      tx:
        bytes: 64528301111
        packets: 181171964
     .. <remaining interfaces omitted>
   lastReportTime: "2022-03-30T07:35:44Z"

`NodeSystemConfigUpdate` resource

The NodeSystemConfigUpdate resource lets you make changes to the node's operating system configuration as well as modify Kubelet flags. Changes other than sysctl changes require a node reboot.

When instantiating this resource, you must specify the target nodes in the nodeSelector field. You must include all key-value pairs for each target node in the nodeSelector field. When you specify more than one target node in this field, the target nodes are updated one node at a time.

CAUTION: The nodeName field has been deprecated. Using it immediately reboots the target nodes, including local control plane nodes, which can halt critical workloads.

The NodeSystemConfigUpdate resource provides the following configuration fields specific to Distributed Cloud connected:

spec.containerRuntimeDNSConfig.ip: specifies a list of IP addresses for private image registries.
spec.containerRuntimeDNSConfig: specifies a list of custom DNS entries used by the Container Runtime Environment on each Distributed Cloud connected node. Each entry consists of the following fields:
- ip: specifies the target IPv4 address,
- domain: specifies the corresponding domain,
- interface: specifies the network egress interface through which the IP address specified in the ip field is reachable. You can specify an interface defined through the following resources: CustomNetworkInterfaceConfig, Network (by annotation), NetworkAttachmentDefinition, (by annotation). This is a preview-level feature.
spec.kubeletConfig.cpuManagerPolicy: specifies the Kubernetes CPUManager policy. Valid values are None and Static.
spec.kubeletConfig.topologyManagerPolicy: specifies the Kubernetes TopologyManager policy. Valid values are None, BestEffort, Restricted, and SingleNumaMode.
spec.osConfig.hugePagesConfig: specifies the huge page configuration per NUMA node. Valid values are 2MB and 1GB. The number of huge pages requested is evenly distributed across both NUMA nodes in the system. For example, if you allocate 16 huge pages at 1 GB each, then each node receives a pre-allocation of 8 GB.
spec.osConfig.isolatedCpusPerSocket: specifies the number of isolated CPUs per socket. Required if cpuManagerPolicy is set to Static. The maximum number of isolated CPUs must be fewer than 80% of the total CPUs in the node.
spec.osConfig.cpuIsolationPolicy: specifies the CPU isolation policy. The Default policy only isolates systemd tasks from CPUs reserved for workloads. The Kernel policy marks the CPUs as isolcpus and sets the rcu_nocb, nohz_full, and rcu_nocb_poll flags on each CPU.
spec.sysctls.NodeLevel: specifies the sysctls parameters that you can configure globally on a node by using the Network Function operator. The configurable parameters are as follows:
- fs.inotify.max_user_instances
- fs.inotify.max_user_watches
- kernel.sched_rt_runtime_us
- kernel.core_pattern
- net.ipv4.tcp_wmem
- net.ipv4.tcp_rmem
- net.ipv4.tcp_slow_start_after_idle
- net.ipv4.udp_rmem_min
- net.ipv4.udp_wmem_min
- net.ipv4.tcp_rmem
- net.ipv4.tcp_wmem
- net.core.rmem_max
- net.core.wmem_max
- net.core.rmem_default
- net.core.wmem_default
- net.netfilter.nf_conntrack_tcp_timeout_unacknowledged
- net.netfilter.nf_conntrack_tcp_timeout_max_retrans
- net.sctp.auth_enable
- net.sctp.sctp_mem
- net.ipv4.udp_mem
- net.ipv4.tcp_mem
- net.ipv4.tcp_slow_start_after_idle
- net.sctp.auth_enable
- vm.max_map_count
You can also scope both safe and unsafe sysctls parameters to a specific Pod or namespace by using the tuning Container Networking Interface (CNI) plug-in.

The NodeSystemConfigUpdate resource provides the following read-only general status fields:

status.lastReportTime: the most recent time that status was reported for the target interface.
status.conditions.lastTransitionTime: the most recent time that the condition of the interface has changed.
status.conditions.observedGeneration: denotes the .metadata.generation value on which the initial condition was based.
status.conditions.message: an informative message describing the change of the interface's condition.
status.conditions.reason: a programmatic identifier denoting the reason for the last change of the interface's condition.
status.conditions.status: the status descriptor of the condition. Valid values are True, False, and Unknown.
status.conditions.type: the condition type in camelCase.

The following example illustrates the structure of the resource:

apiVersion: networking.gke.io/v1
kind: NodeSystemConfigUpdate
metadata:
  name: node-pool-1-config
  namespace: default
spec:
  nodeSelector:
    baremetal.cluster.gke.io/node-pool: node-pool-1
    networking.gke.io/worker-network-sriov.capable: true
  sysctls:
    nodeLevel:
      "net.ipv4.udp_mem" : "12348035 16464042 24696060"
  kubeletConfig:
    topologyManagerPolicy: BestEffort
    cpuManagerPolicy: Static
  osConfig:
    hugePagesConfig:
      "TWO_MB": 0
      "ONE_GB": 16
    isolatedCpusPerSocket:
      "0": 10
      "1": 10

`SriovNetworkNodePolicy` resource

The SriovNetworkNodePolicy resource lets you allocate a group of SR-IOV virtual functions (VFs) on a Distributed Cloud connected physical machine and instantiate that group as a Kubernetes resource. You can then use this resource in a NetworkAttachmentDefinition resource.

You can select each target VF by its PCIe vendor and device ID, its PCIe device addresses, or by its Linux enumerated device name. The SR-IOV Network Operator configures each physical network interface to provision the target VFs. This includes updating the network interface firmware, configuring the Linux kernel driver, and rebooting the Distributed Cloud connected machine, if necessary.

To discover the network interfaces available on your node, you can look up the NetworkInterfaceState resources on that node in the nf-operator namespace.

The following example illustrates the structure of the resource:

apiVersion: sriovnetwork.k8s.cni.cncf.io/v1
kind: SriovNetworkNodePolicy
metadata:
  name: mlnx6-p2-sriov-en2
  namespace: sriov-network-operator
spec:
  deviceType: netdevice
  isRdma: true
  mtu: 9000
  nicSelector:
    pfNames:
    - enp134s0f1np1
  nodeSelector:
    edgecontainer.googleapis.com/network-sriov.capable: "true"
  numVfs: 31
  priority: 99
  resourceName: mlnx6_p2_sriov_en2

The preceding example creates a maximum of 31 VFs from the second port on the network interface named enp134s0f1np1 with an MTU value of 9000 (the maximum allowed value). Use the node selector label edgecontainer.googleapis.com/network-sriov.capable, which is present on all Distributed Cloud connected nodes capable of SR-IOV.

For information about using this resource, see SriovNetworkNodeState.

`SriovNetworkNodeState` resource

The SriovNetworkNodeState read-only resource lets you query the provisioning state of the SriovNetworkNodePolicy resource on a Distributed Cloud connected node. It returns the complete configuration of the SriovNetworkNodePolicy resource on the node as well as a list of active VFs on the node. The status.syncStatus field indicates whether all SriovNetworkNodePolicy resources defined for the node have been properly applied.

The following example illustrates the structure of the resource:

apiVersion: sriovnetwork.k8s.cni.cncf.io/v1
kind: SriovNetworkNodeState
metadata:
  name: MyNode1
  namespace: sriov-network-operator
spec:
  dpConfigVersion: "1969684"
  interfaces:
  - mtu: 9000
    name: enp134s0f1np1
    numVfs: 31
    pciAddress: 0000:86:00.1
    vfGroups:
    - deviceType: netdevice
      mtu: 9000
      policyName: mlnx6-p2-sriov-en2
      resourceName: mlnx6_p2_sriov_en2
      vfRange: 0-30
status:

Status:
  Interfaces:
    Device ID:    1015
    Driver:       mlx5_core
    Link Speed:   25000 Mb/s
    Link Type:    ETH
    Mac:          ba:16:03:9e:9c:87
    Mtu:          9000
    Name:         eno1np0
    Pci Address:  0000:1a:00.0
    Vendor:       15b3
    Device ID:    1015
    Driver:       mlx5_core
    Link Speed:   25000 Mb/s
    Link Type:    ETH
    Mac:          ba:16:03:9e:9c:87
    Mtu:          9000
    Name:         eno2np1
    Pci Address:  0000:1a:00.1
    Vendor:       15b3
    Vfs:
  - Vfs:
    - deviceID: 101e
      driver: mlx5_core
      mac: c2:80:29:b5:63:55
      mtu: 9000
      name: enp134s0f1v0
      pciAddress: 0000:86:04.1
      vendor: 15b3
      vfID: 0
    - deviceID: 101e
      driver: mlx5_core
      mac: 7e:36:0c:82:d4:20
      mtu: 9000
      name: enp134s0f1v1
      pciAddress: 0000:86:04.2
      vendor: 15b3
      vfID: 1
      .. <omitted 29 other VFs here>
  syncStatus: Succeeded

For information about using this resource, see SriovNetworkNodeState.

`NetworkAttachmentDefinition` resource

The NetworkAttachmentDefinition resource lets you attach Distributed Cloud Pods to one or more logical or physical networks on your Distributed Cloud connected node. It leverages the Multus-CNI framework and the SRIOV-CNI plugin.

Use an annotation to reference the name of the appropriate SriovNetworkNodePolicy resource. When you create this annotation, do the following:

Use the key k8s.v1.cni.cncf.io/resourceName.
Use the prefix gke.io/ in its value, followed by the name of the target SriovNetworkNodePolicy resource.

The following example illustrates the structure of the resource:

apiVersion: "k8s.cni.cncf.io/v1"
kind: NetworkAttachmentDefinition
metadata:
  name: sriov-net1
  namespace: mynamespace
  annotations:
    k8s.v1.cni.cncf.io/resourceName: gke.io/mlnx6_p2_sriov_en2

spec:
  config: '{
  "type": "sriov",
  "cniVersion": "0.3.1",
  "name": "sriov-network",
  "ipam": {
    "type": "host-local",
    "subnet": "10.56.217.0/24",
    "routes": [{
      "dst": "0.0.0.0/0"
    }],
    "gateway": "10.56.217.1"
  }
}'

Configure a secondary interface on a Pod using SR-IOV VFs

After you configure a SriovNetworkNodePolicy resource and a corresponding NetworkAttachmentDefinition resource, you can configure a secondary network interface on a Distributed Cloud Pod by using SR-IOV virtual functions.

To do so, add an annotation to your Distributed Cloud Pod definition as follows:

Key: k8s.v1.cni.cncf.io/networks
Value: nameSpace/<NetworkAttachmentDefinition1,nameSpace/NetworkAttachmentDefinition2...

The following example illustrates this annotation:

apiVersion: v1
kind: Pod
metadata:
  name: sriovpod
  annotations:
    k8s.v1.cni.cncf.io/networks: mynamespace/sriov-net1
spec:
  containers:
  - name: sleeppodsriov
    command: ["sh", "-c", "trap : TERM INT; sleep infinity & wait"]
    image: alpine
    securityContext:
      capabilities:
        add:
          - NET_ADMIN

Configure a secondary interface on a Pod using the MacVLAN driver

Distributed Cloud connected also supports creating a secondary network interface on a Pod by using the MacVLAN driver. Only the gdcenet0 interface supports this configuration and only on Pods that run containerized workloads.

To configure an interface to use the MacVLAN driver:

Configure a NetworkAttachmentDefinition resource as shown in the following example:

 apiVersion: "k8s.cni.cncf.io/v1"
 kind: NetworkAttachmentDefinition
 metadata:
   name: macvlan-b400-1
   annotations:
     networking.gke.io/gdce-vlan-id: 400
 spec:
   config: '{
   "type": "macvlan",
   "master": "gdcenet0.400",
   "ipam": {
     "type": "static",
     "addresses": [
       {
         "address": "192.168.100.20/27",
         "gateway": "192.168.100.1"
       }
     ]
   ...
   }
 }'

Add an annotation to your Distributed Cloud Pod definition as follows:

 apiVersion: v1
 kind: Pod
 metadata:
   name: macvlan-testpod1
   annotations:
     k8s.v1.cni.cncf.io/networks: macvlan-b400-1

Configure a secondary interface on a Pod using Distributed Cloud multi-networking

Distributed Cloud connected supports creating a secondary network interface on a Pod by using its multi-network feature. To do so, complete the following steps:

Configure a Network resource. For example:

apiVersion: networking.gke.io/v1
kind: Network
metadata:
  name: vlan200-network
spec:
  type: L2
  nodeInterfaceMatcher:
    interfaceName: vlan200-interface
  gateway4: 10.53.0.1

Add an annotation to your Distributed Cloud Pod definition as follows:

apiVersion: v1
kind: Pod
metadata:
  name: myPod
  annotations:
    networking.gke.io/interfaces: '[{"interfaceName":"eth1","network":"vlan200-network"}]'
    networking.gke.io/default-interface: eth1
...

What's next

Installation requirements

Network Function operator

Prerequisites

Network Function operator resources

Network resource

NetworkInterfaceState resource

NodeSystemConfigUpdate resource

SriovNetworkNodePolicy resource

SriovNetworkNodeState resource

NetworkAttachmentDefinition resource

Configure a secondary interface on a Pod using SR-IOV VFs

Configure a secondary interface on a Pod using the MacVLAN driver

Configure a secondary interface on a Pod using Distributed Cloud multi-networking

What's next

`Network` resource

`NetworkInterfaceState` resource

`NodeSystemConfigUpdate` resource

`SriovNetworkNodePolicy` resource

`SriovNetworkNodeState` resource

`NetworkAttachmentDefinition` resource