Create and manage clusters

This page describes how to create and manage Google Distributed Cloud Edge cluster resources.

For more information about Distributed Cloud Edge clusters, see How Distributed Cloud Edge works.

Local control plane clusters on Distributed Cloud Edge 1.5.x

After Google updates your Distributed Cloud Edge deployment to version 1.5.0 or later, you must manually delete and recreate all local control plane clusters that you have created with Distributed Cloud Edge version 1.4.0. Otherwise, unexpected behavior and data loss can occur. Clusters configured to use a cloud control plane continue to run normally after Google has updated Distributed Cloud Edge deployment to version 1.5.0 or later.

Create a cluster

To create a Distributed Cloud Edge cluster, complete the steps in this section. Creating a cluster is one of multiple steps required to deploy a workload on Distributed Cloud Edge.

To create a cluster with a local control plane that can run workloads while temporarily disconnected from Google Cloud, first read Survivability mode.

To complete this task, you must have the Edge Container Admin role (roles/edgecontainer.admin) in your Google Cloud project.

You must upgrade your Google Cloud SDK to version 450.0.0 or later to create local control plane clusters running Distributed Cloud Edge software version 1.5.0. Otherwise, creating such clusters will fail.

Console

  1. In the Google Cloud console, go to the Clusters page.

    Go to Clusters

  2. Click Create cluster.

  3. On the Create a cluster page, click the On-premises tab.

  4. Next to the Distributed Cloud Edge option, click Configure.

  5. On the Cluster basics page, provide the following information:

    • Name: a unique name that identifies this cluster. This name must be RFC 1213-compliant and consist only of lowercase alphanumeric characters and hyphens (-). It must begin and end with an alphanumeric character.
    • Location: the Google Cloud region in which you want to create this cluster.
    • Default max pods per node: the desired maximum number of Kubernetes Pods to execute on each node in this cluster.
    • Labels: lets you add one or more labels to this cluster by clicking Add label.
  6. In the left navigation, click Networking.

  7. On the Networking page, provide the following information:

    • Cluster default pod address range: the desired IPv4 CIDR block for Kubernetes Pods that run on this cluster.
    • Service address range: the desired IPv4 CIDR block for Kubernetes Services that run on this cluster.

    For more information, see Distributed Cloud Edge Pod and Service network address allocation.

  8. In the left navigation, click Authorization.

  9. On the Authorization page, provide the name of the user account within the target Google Cloud project that is authorized to modify cluster resources.

  10. In the left navigation, click Maintenance policy.

  11. On the Maintenance policy page, provide the following information:

    • Enable Maintenance Window: select this checkbox to configure a maintenance window for the cluster. To prevent unexpected downtime caused by Distributed Cloud Edge software updates, we strongly recommend that you always configure a maintenance window for each Distributed Cloud Edge cluster that you create. For more information, see Understand software updates and maintenance windows.
    • Start time: the desired date and time at which the maintenance window starts for this cluster.
    • End time: the desired date and time at which the maintenance window ends for this cluster.
    • RRule: the frequency of the maintenance window in the FREQ=WEEKLY|DAILY;BYDAY=MO,TU,WE,TH,FR,SA,SU format:
      • FREQ can be DAILY or WEEKLY.
      • BYDAY: a comma-delimited list of days during which maintenance can occur if FREQ is set to WEEKLY. If you omit the BYDAY parameter, Google chooses the day of the week for you.
      • If you set FREQ to DAILY, maintenance windows occur every day during the specified hours.
  12. Assign a node pool to the cluster by doing one of the following:

    • To assign an existing node pool to this cluster, in the Node pools section in the left navigation, select the existing node pool and verify that the node pool configuration on the Node pool details page is correct.
    • To create a new node pool to assign to this cluster, click Add node pool and provide the following information on the Node pool details page:
      • Node pool name: a unique name that identifies this node pool.
      • Node pool labels: click Add label to add one or more labels to this node pool.
      • Worker nodes preference: select the Distributed Cloud Edge nodes to assign to this node pool.
  13. To create the Distributed Cloud Edge cluster, click Create.

gcloud

Use the gcloud edge-cloud container clusters create command:

gcloud edge-cloud container clusters create CLUSTER_ID \
    --project=PROJECT_ID \
    --location=REGION \
    --fleet-project=FLEET_PROJECT_ID \
    --cluster-ipv4-cidr=CLUSTER_IPV4_CIDR_BLOCK \
    --services-ipv4-cidr=SERVICE_IPV4_CIDR_BLOCK \
    --default-max-pods-per-node=MAX_PODS_PER_NODE \
    --release-channel RELEASE_CHANNEL \
    --control-plane-kms-key=CONTROL_PLANE_KMS_KEY \
    --control-plane-node-location=CONTROL_PLANE_LOCATION \
    --control-plane-node-count=CONTROL_PLANE_NODE_COUNT \
    --control-plane-machine-filter=CONTROL_PLANE_NODE_FILTER \
    --control-plane-shared-deployment-policy=CONTROL_PLANE_NODE_SHARING \
    --external-lb-ipv4-address-pools=IPV4_DATA_PLANE_ADDRESSES \
    --version SOFTWARE_VERSION

 

Replace the following:

  • CLUSTER_ID: a unique name that identifies this cluster. This name must be RFC 1213-compliant and consist only of lowercase alphanumeric characters and hyphens (-). It must begin and end with an alphanumeric character.
  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the cluster is created and in which the Kubernetes control plane for the cluster is provisioned.
  • FLEET_PROJECT_ID: the ID of the Fleet host project in which the cluster is registered. If this flag is omitted, the Distributed Cloud Edge cluster project is used as the Fleet host project.
  • CLUSTER_IPV4_CIDR_BLOCK: the desired IPv4 CIDR block for Kubernetes Pods that run on this cluster.
  • SERVICE_IPV4_CIDR_BLOCK: the desired IPv4 CIDR block for Kubernetes Services that run on this cluster.
  • MAX_PODS_PER_NODE (optional): the desired maximum number of Kubernetes Pods to execute on each node in this cluster.
  • RELEASE_CHANNEL: (optional): specifies the release channel for the version of the Distributed Cloud Edge software you want this cluster to run. Valid values are REGULAR (enable automatic cluster upgrades) and NONE (disable automatic cluster upgrades). If omitted, defaults to REGULAR.
  • CONTROL_PLANE_KMS_KEY (optional): the full path to the Cloud KMS key that you want to use with this cluster's control plane node. For example:

    /projects/myProject/locations/us-west1-a/keyRings/myKeyRing/cryptoKeys/myGDCE-Key
    

    This flag only applies if you have integrated Distributed Cloud Edge with Cloud Key Management Service as described in Enable support for customer-managed encryption keys (CMEK) for local storage.

If you are creating a cluster with a local control plane, in addition to replacing the previous variables, also replace the following:

  • CONTROL_PLANE_LOCATION: instructs Distributed Cloud Edge to deploy the control plane workloads for this cluster locally. The value is the name of the target Distributed Cloud Edge zone.
  • CONTROL_PLANE_NODE_COUNT (optional): specifies the number of nodes on which to run the local control plane workloads. Valid values are 3 for high availability and 1 for standard operation. If omitted, defaults to 3.
  • CONTROL_PLANE_NODE_FILTER (optional): specifies a regex-formatted list of nodes that run the local control plane workloads. If omitted, Distributed Cloud Edge selects the nodes automatically at random.
  • CONTROL_PLANE_NODE_SHARING: (optional) specifies whether application workloads can run on the nodes that run the local control plane workloads. Valid values are DISALLOWED an ALLOWED. If omitted, If omitted, defaults to DISALLOWED.
  • IPV4_DATA_PLANE_ADDRESSES: specifies a comma-delimited list of IPv4 addresses, address ranges, or subnetworks for ingress traffic for Services that run behind the Distributed Cloud Edge load balancer when the cluster is running in survivability mode.
  • SOFTWARE_VERSION: specifies the Distributed Cloud Edge software version that you want this cluster to run in the format 1.X.Y where X is the minor version, and Y is the patch version, for example 1.5.0. If omitted, defaults to the server-default software version, which typically is the latest available version of Distributed Cloud Edge. To get the software versions available for cluster creation, including the server-default version, see Get the available software versions for a cluster.

API

Make a POST request to the projects.locations.clusters method:

POST /v1/projects/PROJECT_ID/locations/REGION/clusters?clusterId=CLUSTER_ID&requestId=REQUEST_ID&fleetId=FLEET_PROJECT_ID

{
  "labels": { LABELS,
  },
  "authorization": {
    "adminUsers": {
      "username": "USERNAME"
    }
  },
  "fleet": {
    "project": "FLEET_PROJECT_ID"
  },
  "networking": {
    "clusterIpv4CidrBlocks": CLUSTER_IPV4_CIDR_BLOCK,
    "servicesIpv4CidrBlocks": SERVICE_IPV4_CIDR_BLOCK,
      },
  "defaultMaxPodsPerNode": MAX_PODS_PER_NODE,
  "releaseChannel": "RELEASE_CHANNEL",
  "controlPlaneEncryption": {
   "kmsKey": CONTROL_PLANE_KMS_KEY,
  },      
  "controlPlane": {
    "local": {
      "nodeLocation": "CONTROL_PLANE_LOCATION",
      "nodeCount": CONTROL_PLANE_NODE_COUNT,
      "machineFilter": "CONTROL_PLANE_NODE_FILTER",
      "sharedDeploymentPolicy": "CONTROL_PLANE_NODE_SHARING"
    }
  },
  "externalLoadBalancerIpv4AddressPools": [
    "IPV4_DATA_PLANE_ADDRESSES"
  ],
  "targetVersion": "SOFTWARE_VERSION",
}

Replace the following:

  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster is created.
  • CLUSTER_ID: a unique name that identifies this cluster. This name must be RFC 1213-compliant and consist only of lowercase alphanumeric characters and hyphens (-). It must begin and end with an alphanumeric character.
  • REQUEST_ID: a unique programmatic ID that identifies this request.
  • FLEET_PROJECT_ID: the ID of the Fleet host project in which the cluster is registered. This can be either a separate project or the Distributed Cloud Edge project to which this cluster belongs (PROJECT_ID). Fleet registration is mandatory.
  • LABELS: a list of labels to apply to this cluster resource.
  • USERNAME: the name of the user account within the target Google Cloud project authorized to modify cluster resources.
  • CLUSTER_IPV4_CIDR_BLOCK: the desired IPv4 CIDR block for Kubernetes Pods that run on this cluster.
  • SERVICE_IPV4_CIDR_BLOCK: the desired IPv4 CIDR block for Kubernetes Services that run on this cluster.
  • MAX_PODS_PER_NODE: the desired maximum number of Kubernetes Pods to execute on each node in this cluster.
  • RELEASE_CHANNEL: specifies the release channel for the version of the Distributed Cloud Edge software you want this cluster to run. Valid values are REGULAR and NONE. If omitted, defaults to REGULAR.
  • CONTROL_PLANE_KMS_KEY (optional): the full path to the Cloud KMS key that you want to use with this cluster's control plane node. For example:

    /projects/myProject/locations/us-west1-a/keyRings/myKeyRing/cryptoKeys/myGDCE-Key
    

    This parameter only applies if you have integrated Distributed Cloud Edge with Cloud Key Management Service as described in Enable support for customer-managed encryption keys (CMEK) for local storage.

If you are creating a cluster with a local control plane, in addition to replacing the previous variables, also replace the following:

  • CONTROL_PLANE_LOCATION: instructs Distributed Cloud Edge to deploy the control plane workloads for this cluster locally. The value is the name of the target Distributed Cloud Edge zone.
  • CONTROL_PLANE_NODE_COUNT: specifies the number of nodes on which to run the local control plane workloads. Valid values are 3 for high availability and 1 for standard operation.
  • CONTROL_PLANE_NODE_FILTER (optional): specifies a regex-formatted list of nodes that run the local control plane workloads. If omitted, Distributed Cloud Edge selects the nodes automatically at random.
  • CONTROL_PLANE_NODE_SHARING: specifies whether application workloads can run on the nodes that run the local control plane workloads. Valid values are DISALLOWED an ALLOWED. If omitted, defaults to DISALLOWED.
  • IPV4_DATA_PLANE_ADDRESSES: specifies a comma-delimited list of IPv4 addresses, address ranges, or subnetworks for ingress traffic for Services that run behind the Distributed Cloud Edge load balancer on a local control plane cluster. Does not apply to Cloud control plane clusters.
  • SOFTWARE_VERSION: specifies the Distributed Cloud Edge software version that you want this cluster to run in the format 1.X.Y where X is the minor version, and Y is the patch version, for example 1.5.0. If omitted, defaults to the server-default software version, which typically is the latest available version of Distributed Cloud Edge. To get the software versions available for cluster creation, including the server-default version, see Get the available software versions for a cluster.

List clusters in a region

To list the Distributed Cloud Edge clusters provisioned in a Google Cloud region, complete the steps in this section.

To complete this task, you must have the Edge Container Viewer role (roles/edgecontainer.viewer) in your Google Cloud project.

Console

  1. In the Google Cloud console, go to the Clusters page.

    Go to Clusters

  2. Examine the list of clusters.

gcloud

Use the gcloud edge-cloud container clusters list command:

gcloud edge-cloud container clusters list \
    --project=PROJECT_ID \
    --location=REGION

Replace the following:

  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which you created your Distributed Cloud Edge cluster.

API

Make a GET request to the projects.locations.clusters.list method:

GET /v1/projects/PROJECT_ID/locations/REGION/clusters?clusterId=CLUSTER_ID&filter=FILTER&pageSize=PAGE_SIZE&orderBy=SORT_BY&pageToken=PAGE_TOKEN

Replace the following:

  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster is created.
  • CLUSTER_ID: the name of the target cluster.
  • FILTER: an expression that constrains the returned results to specific values.
  • PAGE_SIZE: the number of results to return per page.
  • SORT_BY: a comma-delimited list of field names by which the returned results are sorted. The default sort order is ascending; for descending sort order, prefix the desired field with ~.
  • PAGE_TOKEN: a token received in the response to the last list request in the nextPageToken field in the response. Send this token to receive a page of results.

Get information about a cluster

To get information about a Distributed Cloud Edge cluster, complete the steps in this section.

To complete this task, you must have the Edge Container Viewer role (roles/edgecontainer.viewer) in your Google Cloud project.

Console

  1. In the Google Cloud console, go to the Clusters page.

    Go to Clusters

  2. Select the desired cluster.

    A fold-out panel with detailed information about the cluster appears in the right pane.

gcloud

Use the gcloud edge-cloud container clusters describe command:

gcloud edge-cloud container clusters describe CLUSTER_ID \
    --project=PROJECT_ID \
    --location=REGION

Replace the following:

  • CLUSTER_ID: the name of the target cluster.
  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which you created your Distributed Cloud Edge zone.

API

Make a GET request to the projects.locations.clusters.get method:

GET /v1/projects/PROJECT_ID/locations/REGION/clusters/CLUSTER_ID

Replace the following:

  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster is created.
  • CLUSTER_ID: the name of the target cluster.

Get the available software versions for a cluster

To find out which Distributed Cloud Edge software versions are available on your Distributed Cloud Edge zone to create clusters, complete the steps in this section.

To complete this task, you must have the Edge Container Viewer role (roles/edgecontainer.viewer) in your Google Cloud project.

gcloud

Use the gcloud edge-cloud container get-server-config command:

gcloud edge-cloud container get-server-config --location=REGION

Replace REGION: with the Google Cloud region in which you created your Distributed Cloud Edge zone.

API

Make a GET request to the projects.locations.serverConfig method:

GET /v1/projects/PROJECT_ID/locations/REGION/serverConfig

Replace the following:

  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster is created.

Upgrade the software version of a local control plane cluster

To upgrade the software version of a Distributed Cloud Edge local control plane cluster, complete the steps in this section. This feature is not available for Cloud control plane clusters.

To complete this task, you must have the Edge Container Admin role (roles/edgecontainer.admin) in your Google Cloud project.

gcloud

Use the gcloud edge-cloud container clusters upgrade command:

gcloud edge-cloud container clusters upgrade CLUSTER_ID \
   --location=REGION \
   --project=PROJECT_ID \
   --schedule=UPGRADE_SCHEDULE \
   --version=SOFTWARE_VERSION

Replace the following:

  • CLUSTER_ID: the name of the target cluster.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster has been created.
  • PROJECT_ID: the ID of the target Google Cloud project.
  • UPGRADE_SCHEDULE: specifies when to trigger the software upgrade. The only valid value is IMMEDIATELY.
  • SOFTWARE_VERSION: specifies the Distributed Cloud Edge software version that you want this cluster to run in the format 1.X.Y where X is the minor version, and Y is the patch version, for example 1.5.1. To get the software versions available for cluster creation, including the server-default version, see Get the available software versions for a cluster.

API

Make a POST request to the projects.locations.clusters.upgrade method:

POST /v1/projects/PROJECT_ID/locations/REGION/clusters/CLUSTER_ID:upgrade?requestId=REQUEST_ID
{
  "name": "projects/PROJECT_ID/locations/REGION/clusters/CLUSTER_ID",
  "targetVersion": "SOFTWARE_VERSION",
    "schedule": "UPGRADE_SCHEDULE",
}

Replace the following:

  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster is created.
  • CLUSTER_ID: the name of the target cluster.
  • REQUEST_ID: a unique programmatic ID that identifies this request.
  • UPGRADE_SCHEDULE: specifies when to trigger the software upgrade. The only valid value is IMMEDIATELY.
  • SOFTWARE_VERSION: specifies the Distributed Cloud Edge software version that you want this cluster to run in the format 1.X.Y where X is the minor version, and Y is the patch version, for example 1.5.1. To get the software versions available for cluster creation, including the server-default version, see Get the available software versions for a cluster.

A software upgrade typically takes about 2 hours per each node that's part of the cluster's node pool. The command returns an operation that lets you track the progress of the software upgrade. While the software upgrade is in progress, the status of the cluster is set to Reconciling and returns to Running once the upgrade completes. A cluster status of Error indicates the software upgrade failed. In such cases, run the upgrade process again. See Get information about a cluster for information about checking the cluster's status.

Obtain credentials for a cluster

To obtain credentials for a Distributed Cloud Edge cluster, complete the steps in this section.

To complete this task, you must have the Edge Container Viewer role (roles/edgecontainer.viewer) in your Google Cloud project.

gcloud

Use the gcloud edge-cloud container clusters get-credentials command:

gcloud edge-cloud container clusters get-credentials CLUSTER_ID \
    --project=PROJECT_ID \
    --location=REGION

Replace the following:

  • CLUSTER_ID: the name of the target cluster.
  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster is created.

API

Make a GET request to the projects.locations.clusters method:

GET /v1/projects/PROJECT_ID/locations/REGION/clusters/CLUSTER_ID

Replace the following:

  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge zone is created.
  • CLUSTER_ID: the name of the target cluster.

Configure a maintenance window for a cluster

This section describes how to specify a maintenance window and clear a maintenance window for a Distributed Cloud Edge cluster.

Specify a maintenance window for a cluster

To specify a maintenance window for a Distributed Cloud Edge cluster, complete the steps in this section. For more information about cluster maintenance, see Understand software updates and maintenance windows.

For date and time formats, use RFC 5545.

To complete this task, you must have the Edge Container Admin role (roles/edgecontainer.admin) in your Google Cloud project.

Console

If you are using the Google Cloud console, you can only specify a maintenance window when you create a cluster. To specify a maintenance window on an existing cluster, you must use the Google Cloud CLI or the Distributed Cloud Edge Container API.

gcloud

Use the gcloud edge-cloud container clusters update command:

gcloud edge-cloud container clusters update CLUSTER_ID \
    --project=PROJECT_ID \
    --location=REGION \
    --maintenance-window-start=MAINTENANCE_START \
    --maintenance-window-end=MAINTENANCE_END \
    --maintenance-window-recurrence=MAINTENANCE_FREQUENCY

Replace the following:

  • CLUSTER_ID: the name of the target cluster.
  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster is created.
  • MAINTENANCE_START: the start time of the maintenance window in the YYYY-MM-DDTHH:MM:SSZ format.
  • MAINTENANCE_END: the end time of the maintenance window in the YYYY-MM-DDTHH:MM:SSZ format.
  • MAINTENANCE_FREQUENCY: the frequency of the maintenance window in the FREQ=WEEKLY|DAILY;BYDAY=MO,TU,WE,TH,FR,SA,SU format:
    • BYDAY: a comma-delimited list of days during which maintenance can occur if FREQ is set to WEEKLY. If you omit the BYDAY parameter, Google chooses the day of the week for you.
    • If you set FREQ to daily, maintenance windows occur every day during the specified hours.

API

Make a PATCH request to the projects.locations.clusters.update method:

PATCH /v1/projects/PROJECT_ID/locations/REGION/clusters/CLUSTER_ID?updateMask=maintenancePolicy&requestId=REQUEST_ID
{
 "maintenance_policy": {
   "window": {
     "recurring_window": {
       "window": {
         "start_time": "MAINTENANCE_START",
         "end_time": "MAINTENANCE_END"
         },
       "recurrence": "MAINTENANCE_FREQUENCY"
     }
   }
 }
}

Replace the following:

  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster is created.
  • CLUSTER_ID: the name of the target cluster.
  • UPDATE_MASK: a comma-separated list of fully qualified field names to update in this request in FieldMask format.
  • REQUEST_ID: a unique programmatic ID that identifies this request.
  • CLUSTER_ID: the name of the target cluster.
  • USERNAME: the name of the user account within the target Google Cloud project authorized to modify cluster resources.
  • MAINTENANCE_START: the start time of the maintenance window in the YYYY-MM-DDTHH:MM:SSZ format.
  • MAINTENANCE_END: the end time of the maintenance window in the YYYY-MM-DDTHH:MM:SSZ format.
  • MAINTENANCE_FREQUENCY: the frequency of the maintenance window in the FREQ=WEEKLY|DAILY;BYDAY=MO,TU,WE,TH,FR,SA,SU format:
    • FREQ can be DAILY or WEEKLY.
    • BYDAY: a comma-delimited list of days during which maintenance can occur if FREQ is set to WEEKLY. If you omit the BYDAY parameter, Google chooses the day of the week for you.
    • If you set FREQ to daily, maintenance windows occur every day during the specified hours.

For more information, see Resource: cluster.

Clear the maintenance window for a cluster

To clear the maintenance window for a Distributed Cloud Edge cluster, complete the steps in this section. For more information about cluster maintenance, see Understand software updates and maintenance windows.

To complete this task, you must have the Edge Container Admin role (roles/edgecontainer.admin) in your Google Cloud project.

gcloud

Use the gcloud edge-cloud container clusters update command:

gcloud edge-cloud container clusters update CLUSTER_ID \
    --project=PROJECT_ID \
    --location=REGION \
    --clear-maintenance-window

Replace the following:

  • CLUSTER_ID: the name of the target cluster.
  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster is created.

API

Make a PATCH request to the projects.locations.clusters.update method:

PATCH /v1/projects/PROJECT_ID/locations/REGION/clusters/CLUSTER_ID?updateMask=maintenancePolicy&requestId=REQUEST_ID
{
 "maintenance_policy": null
}

Replace the following:

  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster is created.
  • CLUSTER_ID: the name of the target cluster.
  • UPDATE_MASK: a comma-separated list of fully qualified field names to update in this request in FieldMask format.
  • REQUEST_ID: a unique programmatic ID that identifies this request.
  • USERNAME: the name of the user account within the target Google Cloud project authorized to modify cluster resources.

For more information, see Resource: cluster.

Delete a cluster

To delete a Distributed Cloud Edge cluster, complete the steps in this section. Before you can delete a cluster, you must first do the following:

To complete this task, you must have the Edge Container Admin role (roles/edgecontainer.admin) in your Google Cloud project.

gcloud

Use the gcloud edge-cloud container clusters delete command:

gcloud edge-cloud container clusters delete CLUSTER_ID \
    --project=PROJECT_ID \
    --location=REGION

Replace the following:

  • CLUSTER_ID: the name of the target cluster.
  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster is created.

API

Make a DELETE request to the projects.locations.clusters.delete method:

DELETE /v1/projects/PROJECT_ID/locations/REGION/clusters/CLUSTER_ID?requestId=REQUEST_ID

Replace the following:

  • PROJECT_ID: the ID of the target Google Cloud project.
  • REGION: the Google Cloud region in which the target Distributed Cloud Edge cluster is created.
  • CLUSTER_ID: the name of the target cluster.
  • REQUEST_ID: a unique programmatic ID that identifies this request.

What's next