Voici un exemple de fichier YAML créé lors de l'exécution de la commande bmctl create cluster. Pour en savoir plus sur cette commande et sur la façon dont vous l'utilisez pour créer différents types de configurations de cluster, consultez les rubriques suivantes :
- Présentation de l'installation : choisir un modèle de déploiement
- Créer des clusters d'administrateur
- Créer des clusters d'utilisateur
- Créer des clusters hybrides
- Créer des clusters autonomes
Fichier de configuration de cluster
# bmctl configuration variables. Because this section is valid YAML but not a valid Kubernetes
# resource, this section can only be included when using bmctl to
# create the initial admin/hybrid cluster. Afterwards, when creating user clusters by directly
# applying the cluster and node pool resources to the existing cluster, you must remove this
# section.
gcrKeyPath: <path to GCR service account key>
sshPrivateKeyPath: <path to SSH private key, used for node access>
gkeConnectAgentServiceAccountKeyPath: <path to Connect agent service account key>
gkeConnectRegisterServiceAccountKeyPath: <path to Hub registration service account key>
cloudOperationsServiceAccountKeyPath: <path to Cloud Operations service account key>
---
apiVersion: v1
kind: Namespace
metadata:
name: cluster-example
---
apiVersion: baremetal.cluster.gke.io/v1
kind: Cluster
metadata:
name: example
namespace: cluster-example
spec:
# Cluster type. This can be:
# 1) admin: to create an admin cluster. This can later be used to create user clusters.
# 2) user: to create a user cluster. Requires an existing admin cluster.
# 3) hybrid: to create a hybrid cluster that runs admin cluster components and user workloads.
# 4) standalone: to create a cluster that manages itself, runs user workloads, but does not manage other clusters.
type: admin
# Anthos cluster version.
anthosBareMetalVersion: 1.6.2
# GKE connect configuration
gkeConnect:
projectID: <GCP project ID>
# Control plane configuration
controlPlane:
nodePoolSpec:
nodes:
# Control plane node pools. Typically, this is either a single machine
# or 3 machines if using a high availability deployment.
- address: <Machine 1 IP>
# Cluster networking configuration
clusterNetwork:
# Pods specify the IP ranges from which pod networks are allocated.
pods:
cidrBlocks:
- 192.168.0.0/16
# Services specify the network ranges from which service VIPs are allocated.
# This can be any RFC1918 range that does not conflict with any other IP range
# in the cluster and node pool resources.
services:
cidrBlocks:
- 10.96.0.0/12
# Load balancer configuration
loadBalancer:
# Load balancer mode can be either 'bundled' or 'manual'.
# In 'bundled' mode a load balancer will be installed on load balancer nodes during cluster creation.
# In 'manual' mode the cluster relies on a manually-configured external load balancer.
mode: bundled
# Load balancer port configuration
ports:
# Specifies the port the load balancer serves the Kubernetes control plane on.
# In 'manual' mode the external load balancer must be listening on this port.
controlPlaneLBPort: 443
# There are two load balancer VIPs: one for the control plane and one for the L7 Ingress
# service. The VIPs must be in the same subnet as the load balancer nodes.
vips:
# ControlPlaneVIP specifies the VIP to connect to the Kubernetes API server.
# This address must not be in the address pools below.
controlPlaneVIP: 10.0.0.8
# IngressVIP specifies the VIP shared by all services for ingress traffic.
# Allowed only in non-admin clusters.
# This address must be in the address pools below.
# ingressVIP: 10.0.0.2
# AddressPools is a list of non-overlapping IP ranges for the data plane load balancer.
# All addresses must be in the same subnet as the load balancer nodes.
# Address pool configuration is only valid for 'bundled' LB mode in non-admin clusters.
# addressPools:
# - name: pool1
# addresses:
# # Each address must be either in the CIDR form (1.2.3.0/24)
# # or range form (1.2.3.1-1.2.3.5).
# - 10.0.0.1-10.0.0.4
# A load balancer node pool can be configured to specify nodes used for load balancing.
# These nodes are part of the Kubernetes cluster and run regular workloads as well as load balancers.
# If the node pool config is absent then the control plane nodes are used.
# Node pool configuration is only valid for 'bundled' load balancer mode.
# nodePoolSpec:
# nodes:
# - address: <Machine 1 IP>
# Proxy configuration
# proxy:
# url: http://[username:password@]domain
# # A list of IPs, hostnames or domains that should not be proxied.
# noProxy:
# - 127.0.0.1
# - localhost
# Logging and Monitoring
clusterOperations:
# Cloud project for logs and metrics.
projectID: <GCP project ID>
# Cloud location for logs and metrics.
location: us-central1
# Whether collection of application logs/metrics should be enabled (in addition to
# collection of system logs/metrics which correspond to system components such as
# Kubernetes control plane or cluster management agents).
# enableApplication: false
# Storage configuration
storage:
# lvpNodeMounts specifies the config for local PersistentVolumes backed by mounted disks.
# These disks need to be formatted and mounted by the user, which can be done before or after
# cluster creation.
lvpNodeMounts:
# path specifies the host machine path where mounted disks will be discovered and a local PV
# will be created for each mount.
path: /mnt/localpv-disk
# storageClassName specifies the StorageClass that PVs will be created with. The StorageClass
# is created during cluster creation.
storageClassName: local-disks
# lvpShare specifies the config for local PersistentVolumes backed by subdirectories in a shared filesystem.
# These subdirectories are automatically created during cluster creation.
lvpShare:
# path specifies the host machine path where subdirectories will be created on each host. A local PV
# will be created for each subdirectory.
path: /mnt/localpv-share
# storageClassName specifies the StorageClass that PVs will be created with. The StorageClass
# is created during cluster creation.
storageClassName: local-shared
# numPVUnderSharedPath specifies the number of subdirectories to create under path.
numPVUnderSharedPath: 5
# Authentication; uncomment this section if you wish to enable authentication to the cluster with OpenID Connect.
# authentication:
# oidc:
# # issuerURL specifies the URL of your OpenID provider, such as "https://accounts.google.com". The Kubernetes API
# # server uses this URL to discover public keys for verifying tokens. Must use HTTPS.
# issuerURL: <URL for OIDC Provider; required>
# # clientID specifies the ID for the client application that makes authentication requests to the OpenID
# # provider.
# clientID: <ID for OIDC client application; required>
# # clientSecret specifies the secret for the client application.
# clientSecret: <Secret for OIDC client application; optional>
# # kubectlRedirectURL specifies the redirect URL (required) for the gcloud CLI, such as
# # "http://localhost:[PORT]/callback".
# kubectlRedirectURL: <Redirect URL for the gcloud CLI; optional, default is "http://kubectl.redirect.invalid">
# # username specifies the JWT claim to use as the username. The default is "sub", which is expected to be a
# # unique identifier of the end user.
# username: <JWT claim to use as the username; optional, default is "sub">
# # usernamePrefix specifies the prefix prepended to username claims to prevent clashes with existing names.
# usernamePrefix: <Prefix prepended to username claims; optional>
# # group specifies the JWT claim that the provider will use to return your security groups.
# group: <JWT claim to use as the group name; optional>
# # groupPrefix specifies the prefix prepended to group claims to prevent clashes with existing names.
# groupPrefix: <Prefix prepended to group claims; optional>
# # scopes specifies additional scopes to send to the OpenID provider as a comma-delimited list.
# scopes: <Additional scopes to send to OIDC provider as a comma-separated list; optional>
# # extraParams specifies additional key-value parameters to send to the OpenID provider as a comma-delimited
# # list.
# extraParams: <Additional key-value parameters to send to OIDC provider as a comma-separated list; optional>
# # certificateAuthorityData specifies a Base64 PEM-encoded certificate authority certificate of your identity
# # provider. It's not needed if your identity provider's certificate was issued by a well-known public CA.
# certificateAuthorityData: <Base64 PEM-encoded certificate authority certificate of your OIDC provider; optional>
# Node access configuration; uncomment this section if you wish to use a non-root user
# with passwordless sudo capability for machine login.
# nodeAccess:
# loginUser: <login user name>
---
# Node pools for worker nodes
apiVersion: baremetal.cluster.gke.io/v1
kind: NodePool
metadata:
name: node-pool-1
namespace: cluster-example
spec:
clusterName: example
nodes:
- address: <Machine 2 IP>
- address: <Machine 3 IP>