This page shows you how to create a standalone cluster, which is a self-managing cluster that runs workloads. Standalone clusters do not manage other clusters, eliminating the need for running a separate admin cluster in resource- constrained scenarios. Furthermore, standalone clusters offer two installation profiles to choose from:
- Default: The default profile has limited resource requirements.
- Edge: The edge profile has significantly reduced system resource requirements and is recommended for edge devices with high resource constraints.
Before creating a standalone cluster, consider the tradeoff between reducing resources and overall security. Since standalone clusters manage themselves, running workloads on the same cluster increases the risk of exposing sensitive administrative data, like SSH keys.
Before you create a standalone cluster, ensure the following:
bmctlis downloaded (
gs://anthos-baremetal-release/bmctl/1.13.7/linux-amd64/bmctl) from Cloud Storage.
- Workstation running
bmctlhas network connectivity to all nodes in the target standalone cluster.
- Workstation running
bmctlhas network connectivity to the control plane VIP of the target standalone cluster.
- SSH key used to create the standalone cluster is available to root, or there is SUDO user access on all nodes in the target standalone cluster.
- Connect-register service account is configured for use with Connect.
If you want to enable SELinux to secure your containers, you must make sure that
SELinux is enabled in
Enforced mode on all your host machines. Starting with
Anthos clusters on bare metal release 1.9.0 or later, you can enable or disable SELinux
before or after cluster creation or cluster upgrades. SELinux is enabled by
default on Red Hat Enterprise Linux (RHEL) and CentOS. If SELinux is disabled on
your host machines or you aren't sure, see
Securing your containers using SELinux
for instructions on how to enable it.
Anthos clusters on bare metal supports SELinux in only RHEL and CentOS systems.
Create a standalone cluster
You can create a standalone cluster that has a single control node plane using
bmctl command. This type of configuration reduces resource consumption but
does not provide high availability (HA), and the resulting cluster has a single
You can also create an HA standalone cluster. In HA mode, if a node fails, then others will take its place. To create an HA standalone cluster, you must specify at least three nodes for the control plane.
bmctl command can typically be run on a separate workstation or on one of
the standalone cluster nodes. However, if you are creating a standalone cluster
with the edge profile enabled and have the minimum required resources
configured, we recommend running
bmctl on a separate workstation.
gcloudas a user:
gcloud auth application-default login
You need to have a Project Owner or Editor role to use the automatic API enablement and Service Account creation features described below.
You can also add the following IAM roles to the user:
- Service Account Admin
- Service Account Key Admin
- Project IAM Admin
- Compute Viewer
- Service Usage Admin
Alternatively, if you already have a service account with those roles, run:
Replace JSON_KEY_FILE with the path to your service account JSON key file.
Get your Google Cloud project ID to use with cluster creation:
export CLOUD_PROJECT_ID=$(gcloud config get-value project)
Create a standalone cluster config file
After you've logged into gcloud and have your project set up, you can create the
cluster config file with the
bmctl command. In this example, all service
accounts are automatically created by the
bmctl create config command:
bmctl create config -c STANDALONE_CLUSTER_NAME --enable-apis \ --create-service-accounts --project-id=$CLOUD_PROJECT_ID
Replace the following:
- STANDALONE_CLUSTER_NAME with the name of the standalone cluster that you want to create.
The following command creates a config file for a standalone cluster
standalone1 associated with project ID
bmctl create config -c standalone1 --create-service-accounts --project-id=my-gcp-project
The file is written to
As an alternative to automatically enabling APIs and creating service accounts,
you can also provide your existing service accounts if you have the
proper IAM permissions.
This way, you can skip the automatic service account creation in the previous
step in the
bmctl create config -c standalone1
Edit the cluster config file
Now that you have a cluster config file, make the following changes to it:
Add the SSH private key to access the standalone cluster nodes:
# bmctl configuration variables. Because this section is valid YAML but not a valid Kubernetes # resource, this section can only be included when using bmctl to # create the initial admin/hybrid cluster. Afterwards, when creating user clusters by directly # applying the cluster and node pool resources to the existing cluster, you must remove this # section. gcrKeyPath: bmctl-workspace/.sa-keys/my-gcp-project-anthos-baremetal-gcr.json sshPrivateKeyPath: /path/to/your/ssh_private_key gkeConnectAgentServiceAccountKeyPath: bmctl-workspace/.sa-keys/my-gcp-project-anthos-baremetal-connect.json gkeConnectRegisterServiceAccountKeyPath: bmctl-workspace/.sa-keys/my-gcp-project-anthos-baremetal-register.json cloudOperationsServiceAccountKeyPath: bmctl-workspace/.sa-keys/my-gcp-project-anthos-baremetal-cloud-ops.json
Register your clusters to a fleet. The project ID that you specified in the
bmctl create configcommand is automatically added to the
gkeConnect.projectIDfield in the cluster config file. This project is referred to as the fleet host project.
- If you created your config file using automatic API enablement and Service Account creation features, you can skip this step.
- If you created the config file without using the automatic API enablement
and Service Account creation features, reference the downloaded service
account JSON keys in the corresponding
gkeConnectRegisterServiceAccountKeyPathfields of the cluster config file.
Change the config to specify a cluster type of
admin. If you want to enable the edge profile to minimize resource consumption, specify
spec: # Cluster type. This can be: # 1) admin: to create an admin cluster. This can later be used to create user clusters. # 2) user: to create a user cluster. Requires an existing admin cluster. # 3) hybrid: to create a hybrid cluster that runs admin cluster components and user workloads. # 4) standalone: to create a cluster that manages itself, runs user workloads, but does not manage other clusters. type: standalone # Edge profile minimizes the resource consumption of Anthos clusters on bare metal. It is only available for standalone clusters. profile: edge
(Optional) Change the config to specify a multi-node, high availability, control plane. Specify an odd number of nodes to be able to have a majority quorum for HA:
# Control plane configuration controlPlane: nodePoolSpec: nodes: # Control plane node pools. Typically, this is either a single machine # or 3 machines if using a high availability deployment. - address: 10.200.0.4 - address: 10.200.0.5 - address: 10.200.0.6
If you have an even number of nodes temporarily while adding or removing nodes for maintenance or replacement, your deployment maintains HA as long as you have quorum.
Specify the pod density of cluster nodes:
.... # NodeConfig specifies the configuration that applies to all nodes in the cluster. nodeConfig: # podDensity specifies the pod density configuration. podDensity: # maxPodsPerNode specifies at most how many pods can be run on a single node. maxPodsPerNode: 250 ....
For standalone clusters, allowable values for
32-250for HA clusters and
64-250for non-HA clusters. The default value if unspecified is
110. Once the cluster is created, this value cannot be updated.
Pod density is also limited by your cluster's available IP resources. For details, see Pod networking.
Create the standalone cluster with the cluster config
bmctl command to deploy the standalone cluster:
bmctl create cluster -c CLUSTER_NAME
Replace CLUSTER_NAME with the name of the cluster you created in the previous section.
The following shows an example of the command to create a cluster
bmctl create cluster -c standalone1
Sample standalone cluster configurations
For example standalone cluster configurations, see Standalone clusters in the Cluster configuration samples.