This document describes how to set up private connectivity from hosts in a VPC network or on-premises network to Google APIs and services that VPC Service Controls supports.
Before you read this document, we recommend that you familiarize yourself with Private Google Access concepts, specifications, and network configuration. See example topology diagrams about using Private Google Access with VPC Service Controls.
Before you begin
- Enable the APIs that you want to access through the APIs & services page in the Google Cloud console.
- Ensure that you have the required role to create or update subnets. Project owners, editors, and IAM principals with the Network Admin role can create or update subnets and assign IP addresses. For more information about roles, read the IAM roles documentation.
- Verify that a VPC network is set up for Private Google Access and Private Google Access for on-premises hosts. Both auto and custom mode VPC networks are supported. Legacy networks are not supported.
- Ensure that VM instances in a VPC network have a private IP address (no public IP address) and are in a subnet with Private Google Access enabled.
- For on-premises hosts, ensure that you have an existing Cloud VPN tunnel or a Cloud Interconnect connection to your VPC network. To support on-premises hosts that have IPv6 addresses, see IPv6 support.
Overview of procedure
To set up private connectivity, complete the following tasks:
- Configure routes for the
restricted.googleapis.com
IP address ranges. For more information, see Configure routes. - Configure firewall rules to let the appropriate traffic reach the
restricted.googleapis.com
IP address ranges. For more information, see Configure firewall rules. - Configure DNS so that traffic to Google APIs resolves to the
restricted.googleapis.com
IP address ranges. For more information, see Configure DNS.
IPv6 support for restricted.googleapis.com
You can access Google APIs by using the IPv6 address range for
the restricted.googleapis.com
domain: 2600:2d00:0002:1000::/64
.
Consider configuring the IPv6 addresses if you want to use the restricted.googleapis.com
domain, and you
have clients that use IPv6 addresses. IPv6 clients that also have IPv4 addresses configured can
reach Google APIs and services by using the IPv4 addresses. Not all services accept traffic from
IPv6 clients.
To let IPv6 clients in your on-premises environment access Google APIs by using
restricted.googleapis.com
, you must configure the connection to your VPC
network to support IPv6. For more information, see the following pages:
On-premises clients can send requests from any IPv6 GUA or ULA addresses, except for the ULA range
fda3:e722:ac3:cc00::/64
, which is reserved for internal use.
For more information about the restricted.googleapis.com
VIP, see Configure
Private Google Access.
Direct connectivity to APIs and services
Some Google APIs and services offer direct connectivity from Compute Engine
virtual machine (VM) instances, bypassing Google Front Ends
(GFEs). To allow
this traffic, you must ensure that your routes and firewall rules allow egress
traffic to reach 34.126.0.0/18
and 2001:4860:8040::/42
.
You don't need to create DNS records for these addresses. Several Google Cloud
services support direct connectivity to provide enhanced performance for Google
gRPC APIs. To enable this enhanced performance, you must provide access to the
specified IP address ranges.
Direct connectivity is supported only from Google Cloud resources. You can't use direct connectivity from on-premises hosts.
Services that offer direct connectivity support VPC Service Controls.
Configure routes to restricted.googleapis.com
Although VPC Service Controls are enforced for compatible and configured
services, regardless of the domain you use, restricted.googleapis.com
provides
additional risk mitigation for data exfiltration. restricted.googleapis.com
denies access to Google APIs and services that are not supported by
VPC Service Controls.
For both Private Google Access and Private Google Access for on-premises
hosts, your VPC network must include a route for the
restricted.googleapis.com
IP address ranges whose next hop is the default
internet gateway. Even though the next hop is a default internet gateway, the
traffic sent to restricted.googleapis.com
remains within Google's network.
If your VPC network does not have a
default route whose next hop is the
default internet gateway, you can create a custom static route whose destination
is the restricted.googleapis.com
IP address range, and whose next hop is the
default internet gateway. To prevent access to the internet, you must remove
other routes whose next hop is the default internet gateway.
For more information about working with VPC routes, see Using Routes in the VPC documentation.
Configure custom static routes in a VPC network
Add custom static routes to enable access to Google-managed services that VPC Service Controls supports.
gcloud compute routes create ROUTE_NAME \ --network=NETWORK_NAME \ --destination-range=DESTINATION_RANGE \ --next-hop-gateway=default-internet-gateway
Replace the following:
ROUTE_NAME
: a name for the custom routeNETWORK_NAME
: the name of your VPC networkDESTINATION_RANGE
: the destination range for the route- To route traffic to the
restricted.googleapis.com
VIP, use the following ranges:- For IPv4 traffic:
199.36.153.4/30
- For IPv6 traffic:
2600:2d00:0002:1000::/64
- For IPv4 traffic:
- To route traffic to APIs that allow direct
connectivity, use the following ranges:
- For IPv4 traffic:
34.126.0.0/18
- For IPv6 traffic:
2001:4860:8040::/42
- For IPv4 traffic:
- To route traffic to the
Announce the restricted route to hosts in an on-premises network
If you're using Private Google Access for on-premises hosts, configure routes so that Google API traffic is forwarded through your Cloud VPN or Cloud Interconnect connection. To announce the restricted VIP address ranges to your on-premises network, use Cloud Router custom advertisement mode. The restricted VIP address ranges are only accessible to on-premises hosts that can reach your VPC network through private IP addresses.
You can add this custom advertised route to a Cloud Router (for all BGP sessions on the router) or a select BGP session (for a single Cloud VPN tunnel or VLAN attachment).
IPv6 routes are advertised only in BGP sessions where IPv6 is enabled.
To create a custom advertised route for the restricted range for all BGP sessions on an existing Cloud Router, follow these steps:
Console
In the Google Cloud console, go to the Cloud Routers page.
Select the Cloud Router to update.
In the Cloud Router's detail page, select Edit.
Expand the Advertised routes section.
For the Routes, select Create custom routes.
To continue advertising the subnets available to the Cloud Router, select Advertise all subnets visible to the Cloud Router. Enabling this option mimics the Cloud Router's default behavior.
To add an advertised route, select Add custom route .
Configure the route advertisement.
- Source: Select Custom IP range.
- IP address range:
- For IPv4 connectivity:
199.36.153.4/30
- For IPv6 connectivity:
2600:2d00:0002:1000::/64
- For IPv4 connectivity:
- Description: Add a description of
Restricted Google APIs IPs
.
After you add routes, select Save.
gcloud
Run the update
command, using either the --set-advertisement-ranges
or
--add-advertisement-ranges
flag to specify the custom IP ranges:
To set custom IP ranges, use the
--set-advertisement-ranges
flag. Any existing custom advertised routes are replaced. The following example updates themy-router
Cloud Router to advertise all subnets and therestricted.googleapis.com
IP address ranges.gcloud compute routers update my-router \ --advertisement-mode CUSTOM \ --set-advertisement-groups ALL_SUBNETS \ --set-advertisement-ranges RANGES
Replace
RANGES
with the ranges that you want to use:- For IPv4 connectivity:
199.36.153.4/30
- For IPv6 connectivity:
2600:2d00:0002:1000::/64
- For both IPv4 and IPv6 connectivity:
199.36.153.4/30,2600:2d00:0002:1000::/64
- For IPv4 connectivity:
To append custom IP ranges to an existing advertisement, use the
--add-advertisement-ranges
flag. Note that this flag requires the Cloud Router's advertisement mode to already be set tocustom
. The following example adds therestricted.googleapis.com
IP address ranges to the Cloud Router's advertisements:gcloud compute routers update my-router \ --add-advertisement-ranges RANGES
Replace
RANGES
with the ranges that you want to use:- For IPv4 connectivity:
199.36.153.4/30
- For IPv6 connectivity:
2600:2d00:0002:1000::/64
- For both IPv4 and IPv6 connectivity:
199.36.153.4/30,2600:2d00:0002:1000::/64
- For IPv4 connectivity:
To create a custom advertised route for the restricted range on a specific BGP session of an existing Cloud Router, follow these steps:
Console
In the Google Cloud console, go to the Cloud Routers page.
Select the Cloud Router that contains the BGP session to update.
In the Cloud Router's detail page, select the BGP session to update.
In the BGP session details page, select Edit.
For the Routes, select Create custom routes.
Select Advertise all subnets visible to the Cloud Router to continue advertising the subnets available to the Cloud Router. Enabling this option mimics the Cloud Router's default behavior.
Select Add custom route to add an advertised route.
Configure the route advertisement.
- Source: Select Custom IP range to specify a custom IP range.
- IP address range:
- For IPv4 connectivity:
199.36.153.4/30
- For IPv6 connectivity:
2600:2d00:0002:1000::/64
- For IPv4 connectivity:
- Description: Add a description of
Restricted Google APIs IPs
.
After you're done adding routes, select Save.
gcloud
Run the update-bgp-peer
command, using either the
--set-advertisement-ranges
or --add-advertisement-ranges
flag to specify
the custom IP ranges.
To set custom IP ranges, use the
--set-advertisement-ranges
flag. Any existing custom advertised routes are replaced.If you are adding IPv6 custom ranges, and if IPv6 traffic is disabled for the BGP session, you can enable it with the
--enable-ipv6
flag.The following example updates the
my-bgp-session
BGP session on themy-router
Cloud Router to advertise all subnets and the custom IP range:gcloud compute routers update-bgp-peer my-router \ --peer-name my-bgp-session \ --advertisement-mode CUSTOM \ --set-advertisement-groups ALL_SUBNETS \ --set-advertisement-ranges RANGES
Replace
RANGES
with the ranges that you want to use:- For IPv4 connectivity:
199.36.153.4/30
- For IPv6 connectivity:
2600:2d00:0002:1000::/64
- For both IPv4 and IPv6 connectivity:
199.36.153.4/30,2600:2d00:0002:1000::/64
- For IPv4 connectivity:
To append custom IP ranges to existing ones, use the
--add-advertisement-ranges
flag. Note that this flag requires the Cloud Router's advertisement mode to already be set tocustom
.If you are adding IPv6 custom ranges, and if IPv6 traffic is disabled for the BGP session, you can enable it with the
--enable-ipv6
flag.The following example adds the restricted VIP address ranges to the Cloud Router's advertisements:
gcloud compute routers update-bgp-peer my-router \ --peer-name my-bgp-session \ --add-advertisement-ranges RANGES
Replace
RANGES
with the ranges that you want to use:- For IPv4 connectivity:
199.36.153.4/30
- For IPv6 connectivity:
2600:2d00:0002:1000::/64
- For both IPv4 and IPv6 connectivity:
199.36.153.4/30,2600:2d00:0002:1000::/64
For more information about custom advertisement mode, see Custom advertised routes.
- For IPv4 connectivity:
Configure firewall rules
For Private Google Access, VM instances use internal IP addresses and don't require external IP addresses to reach protected Google API resources. However, it's possible for VM instances to possess external IP addresses or otherwise meet the requirements for internet access. In addition to custom advertised routes, you can restrict egress traffic from VM instances in your VPC network by creating firewall rules to deny egress traffic.
By default, the implied allow egress firewall
rule permits VM instances to send
traffic to any destination if an applicable route exists. You can first create an
egress deny rule to block all outbound traffic. You can then create higher
priority egress rules that permit traffic to selected destinations in your
VPC network and to the restricted.googleapis.com
IP address
ranges. All communication to restricted.googleapis.com
is on TCP
port 443
.
To let traffic from Google Cloud reach the restricted.googleapis.com
VIPs, add firewall rules for the following destinations:
- For IPv4 traffic:
199.36.153.4/30
- For IPv6 traffic:
2600:2d00:0002:1000::/64
To allow traffic from Google Cloud to reach APIs and services that allow direct connectivity, add firewall rules for the following destinations:
- For IPv4 traffic:
34.126.0.0/18
- For IPv6 traffic:
2001:4860:8040::/42
For more information about working with VPC firewall rules, see Use VPC firewall rules in the Cloud Next Generation Firewall documentation.
Configure your on-premises firewall rules to let traffic from your
on-premises hosts reach the restricted.googleapis.com
IP address
ranges.
- For IPv4 traffic:
199.36.153.4/30
- For IPv6 traffic:
2600:2d00:0002:1000::/64
Direct connectivity to Google APIs and services is not supported from on-premises networks.
Configure DNS
You can use managed private zones for your VPC networks.
Cloud DNS private DNS zones enable you to host a DNS zone accessible from
authorized VPC networks.
To configure forwarding from certain on-premises name servers, you can use the
restricted.googleapis.com
IP address ranges.
You can then create a private zone for googleapis.com
with a DNS A record that
maps restricted.googleapis.com
and appropriate CNAME records for each
*.googleapis.com
name. For more information, see
Managing zones.
For on-premises access, you can configure a Cloud DNS inbound forwarding policy to enable on-premises name servers to query a Cloud DNS managed private zone. You can also configure an on-premises name server, such as one using BIND:
Configure DNS with Cloud DNS
To enable DNS resolution for VM instances in your VPC network, hosts in an on-premises network, or both, use Cloud DNS. If you're using Shared VPC, see Private zones and Shared VPC in the Cloud DNS documentation. Also, if you're using Shared VPC, we recommend that you include the Shared VPC network host project in the same service perimeter as projects that connect to the network.
Configure Cloud DNS by using private zones
You can use private zones to configure Cloud DNS:
Create a managed private zone for your VPC network.
gcloud dns managed-zones create ZONE_NAME \ --visibility=private \ --networks=https://www.googleapis.com/compute/v1/projects/PROJECT_ID/global/networks/NETWORK_NAME \ --description=DESCRIPTION \ --dns-name=googleapis.com
Replace the following:
ZONE_NAME
: a name for the zone that you are creating. For example,vpc
. This name is used in each of the following steps.PROJECT_ID
: the ID of the project that hosts your VPC network.NETWORK_NAME
: the name of your VPC network.DESCRIPTION
: an optional, human-readable description of the managed zone.
Start a transaction.
gcloud dns record-sets transaction start --zone=ZONE_NAME
Replace
ZONE_NAME
with the name of the zone that you created in the first step.Add DNS records.
gcloud dns record-sets transaction add --name=*.googleapis.com. \ --type=CNAME restricted.googleapis.com. \ --zone=ZONE_NAME \ --ttl=300
Replace
ZONE_NAME
with the name of the zone that you created in the first step.gcloud dns record-sets transaction add --name=restricted.googleapis.com. \ --type=A 199.36.153.4 199.36.153.5 199.36.153.6 199.36.153.7 \ --zone=ZONE_NAME \ --ttl=300
Replace
ZONE_NAME
with the name of the zone that you created in the first step.If you're configuring the IPv6 addresses for
restricted.googleapis.com
, also create the following record set:gcloud dns record-sets transaction add --name=restricted.googleapis.com. \ --type=AAAA 2600:2d00:0002:1000:: \ --zone=ZONE_NAME \ --ttl=300
Execute the transaction.
gcloud dns record-sets transaction execute --zone=ZONE_NAME
Replace
ZONE_NAME
with the name of the zone that you created in the first step.Optional. To enable on-premises hosts to reach the restricted VIP, complete the following steps:
Create a DNS policy and enable inbound DNS forwarding to make VPC network's name resolution services externally available to systems in on-premises networks,
gcloud dns policies create POLICY_NAME \ --networks=https://www.googleapis.com/compute/v1/projects/PROJECT_ID/global/networks/NETWORK_NAME \ --enable-inbound-forwarding \ --description=DESCRIPTION
Replace the following:
POLICY_NAME
: a name for the policy that you are creating. For example,apipolicy
.PROJECT_ID
: the ID of the project that hosts your VPC network.NETWORK_NAME
: the name of your VPC network.DESCRIPTION
: an optional, human-readable description of the managed zone.
In your on-premises network, point your on-premises DNS to the Cloud DNS forwarder IP address. To find the forwarder IP address, use the
compute addresses list
command:gcloud compute addresses list --filter='name ~ ^dns-forwarding.*' \ --format='csv[no-heading](address, subnetwork)'
Configure DNS with BIND
If you use BIND for DNS resolution, you can configure it to resolve Google API requests to the restricted Google APIs. Use the following example BIND configuration, which makes use of response policy zones (RPZ) to achieve this behavior:
Add the following lines to
/etc/bind/named.conf
:include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local";
Add the following lines to
/etc/bind/named.conf.options
:options { directory "/var/cache/bind"; dnssec-validation no; auth-nxdomain no; # conform to RFC 1035 listen-on-v6 { any; }; listen-on { any; }; response-policy { zone "googleapis.zone"; }; allow-query { any;}; };
Add the following lines to
/etc/bind/named.conf.local
:include "/etc/bind/named.conf.default-zones";
zone "googleapis.zone" { type master; file "/etc/bind/db.googleapis.zone"; allow-query {none;}; };
Add the following lines to
/etc/bind/db.googleapis.zone
:$TTL 1H @ SOA LOCALHOST. noreply.localhost(1 1h 15m 30d 2h) NS LOCALHOST.
*.googleapis.com CNAME restricted.googleapis.com. restricted.googleapis.com CNAME rpz-passthru.
Configure DNS in special cases
When you need to configure DNS in special cases, keep the following in mind:
- Custom BIND is not supported when using Dataflow. To customize DNS resolution when using Dataflow with VPC Service Controls, use Cloud DNS private zones instead of using custom BIND servers. To use your own on-premises DNS resolution, consider using a Google Cloud DNS forwarding method.
You might need to also configure DNS for
gcr.io
if, for example, you're using Google Kubernetes Engine (GKE). For more information, see Setting up Container Registry for GKE private clusters.