Cloud Data Loss Prevention (Cloud DLP) kini menjadi bagian dari Sensitive Data Protection. Nama API tetap sama: Cloud Data Loss Prevention API (DLP API). Untuk informasi tentang layanan yang membentuk Perlindungan Data Sensitif, lihat Ringkasan Perlindungan Data Sensitif.

Halaman ini diterjemahkan oleh Cloud Translation API.

Mengubah detektor infoType untuk menyaring hasil pemindaian

Detektor infoType bawaan Sensitive Data Protection efektif dalam menemukan jenis data sensitif yang umum. Detektor infoType kustom memungkinkan Anda menyesuaikan sepenuhnya detector data sensitif Anda sendiri. Aturan pemeriksaan membantu meningkatkan hasil pemindaian yang ditampilkan Sensitive Data Protection dengan mengubah mekanisme deteksi detektor infoType tertentu.

Jika ingin mengecualikan atau menyertakan lebih banyak nilai dari hasil yang ditampilkan oleh detektor infoType bawaan, Anda dapat membuat infoType kustom baru dari awal dan menentukan semua kriteria yang harus dicari oleh Perlindungan Data Sensitif. Atau, Anda dapat menyaring temuan yang ditampilkan oleh detektor bawaan atau kustom Sensitive Data Protection sesuai dengan kriteria yang Anda tentukan. Anda dapat melakukannya dengan menambahkan aturan pemeriksaan yang dapat membantu mengurangi derau, meningkatkan presisi dan recall, atau menyesuaikan kepastian kemungkinan temuan pemindaian.

Topik ini membahas cara menggunakan dua jenis aturan pemeriksaan untuk mengecualikan temuan tertentu atau menambahkan temuan tambahan, semuanya sesuai dengan kriteria kustom yang Anda tentukan. Topik ini menyajikan beberapa skenario saat Anda mungkin ingin mengubah detektor infoType yang ada.

Dua jenis aturan inspeksi adalah:

Aturan pengecualian, yang membantu mengecualikan temuan yang salah atau tidak diinginkan.
Aturan frasa pengaktif, yang membantu mendeteksi temuan tambahan.

Aturan pengecualian

Aturan pengecualian berguna dalam situasi seperti berikut:

Anda ingin mengecualikan kecocokan pemindaian duplikat dalam hasil yang disebabkan oleh detektor infoType yang tumpang-tindih. Misalnya, Anda memindai alamat email dan nomor telepon, tetapi Anda menerima dua hit untuk alamat email yang berisi nomor telepon, seperti "206-555-0764@example.org".
Anda mengalami derau dalam hasil pemindaian. Misalnya, Anda melihat alamat email dummy yang sama (seperti example@example.com") atau domain (seperti "example.com") yang ditampilkan terlalu sering oleh pemindaian untuk alamat email yang sah.
Anda memiliki daftar istilah, frasa, atau kombinasi karakter yang ingin dikecualikan dari hasil.
Anda ingin mengecualikan seluruh kolom data dari hasil.
Anda ingin mengecualikan temuan yang berada di dekat string yang cocok dengan ekspresi reguler.

Ringkasan Exclusion rules API

Perlindungan Data Sensitif menentukan aturan pengecualian dalam objek ExclusionRule. Dalam ExclusionRule, Anda menentukan salah satu dari hal berikut:

Objek Dictionary, yang berisi daftar string yang akan dikecualikan dari hasil.
Objek Regex, yang menentukan pola ekspresi reguler. String yang cocok dengan pola akan dikecualikan dari hasil.
Objek ExcludeInfoTypes, yang berisi array pendeteksi infoType. Jika temuan cocok dengan salah satu pendeteksi infoType yang tercantum di sini, temuan tersebut akan dikecualikan dari hasil.
Objek ExcludeByHotword, yang berisi hal berikut:
- Ekspresi reguler yang menentukan kata kunci.
- Nilai kedekatan yang menentukan seberapa dekat kata kunci harus dengan penemuan.
Jika temuan berada dalam kedekatan yang ditetapkan, temuan tersebut akan dikecualikan dari hasil. Untuk tabel, jenis aturan pengecualian ini memungkinkan Anda mengecualikan seluruh kolom data dari hasil.

Contoh skenario aturan pengecualian

Setiap cuplikan JSON berikut mengilustrasikan cara mengonfigurasi Perlindungan Data Sensitif untuk skenario tertentu.

Menghapus alamat email tertentu dari pemindaian pendeteksi EMAIL_ADDRESS

Cuplikan dan kode JSON berikut dalam beberapa bahasa mengilustrasikan cara menunjukkan ke Perlindungan Data Sensitif menggunakan InspectConfig bahwa deteksi tersebut harus menghindari pencocokan pada "example@example.com" dalam pemindaian yang menggunakan EMAIL_ADDRESS detektor infoType:

C#

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

Untuk melakukan autentikasi ke Perlindungan Data Sensitif, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.


using System;
using System.Collections.Generic;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringWithExclusionDict
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, List<String> excludedMatchList)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteContentItem };

        var infoTypes = new string[] { "PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER" }.Select(it => new InfoType { Name = it });

        var exclusionRule = new ExclusionRule
        {
            MatchingType = MatchingType.FullMatch,
            Dictionary = new CustomInfoType.Types.Dictionary
            {
                WordList = new CustomInfoType.Types.Dictionary.Types.WordList
                {
                    Words = { excludedMatchList }
                }
            }
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "EMAIL_ADDRESS" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringWithExclusionDictionary inspects a string for sensitive data
// using exclusion dictionary, here the function omits a specific email address
// from an EMAIL_ADDRESS detector scan with an exclusion dictionary
func inspectStringWithExclusionDictionary(w io.Writer, projectID, textToInspect string, excludedMatchList []string) error {
	// projectID := "my-project-id"
	// textToInspect := "Some email addresses: gary@example.com, example@example.com"
	// excludedMatchList := []string{"example@example.com"}

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "PHONE_NUMBER"},
		{Name: "EMAIL_ADDRESS"},
		{Name: "CREDIT_CARD_NUMBER"},
	}

	// Exclude matches from the specified excludedMatchList.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Dictionary{
			Dictionary: &dlppb.CustomInfoType_Dictionary{
				Source: &dlppb.CustomInfoType_Dictionary_WordList_{
					WordList: &dlppb.CustomInfoType_Dictionary_WordList{
						Words: excludedMatchList,
					},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_FULL_MATCH,
	}

	// Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "EMAIL_ADDRESS"},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		// Construct the configuration for the Inspect request, including the ruleSet.
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes:    infoTypes,
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary.WordList;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.Arrays;
import java.util.List;

public class InspectStringWithExclusionDict {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Some email addresses: gary@example.com, example@example.com";
    List<String> excludedMatchList = Arrays.asList("example@example.com");
    inspectStringWithExclusionDict(projectId, textToInspect, excludedMatchList);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringWithExclusionDict(
      String projectId, String textToInspect, List<String> excludedMatchList) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName : new String[] {"PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Exclude matches from the specified excludedMatchList.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setMatchingType(MatchingType.MATCHING_TYPE_FULL_MATCH)
              .setDictionary(
                  Dictionary.newBuilder()
                      .setWordList(WordList.newBuilder().addAllWords(excludedMatchList)))
              .build();

      // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("EMAIL_ADDRESS"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Some email addresses: gary@example.com, example@example.com';

// The infoTypes of information to match
// const infoTypes = [{ name: 'EMAIL_ADDRESS' }];

// Words to exclude
// const excludedWords = ['gary@example.com'];

async function inspectStringWithExclusionDict() {
  // Specify the type and content to be inspected.
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Exclude matches from the specified excludedWords.
  const exclusionRule = {
    dictionary: {
      wordList: {
        words: excludedWords,
      },
    },
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
  };

  // Construct a ruleset that applies the exclusion rule to the specified infotype.
  const ruleSet = [
    {
      infoTypes: infoTypes,
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print Findings
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringWithExclusionDict();

PHP

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary\WordList;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, using exclusion dictionary
 * Omit a specific email address from an EMAIL_ADDRESS detector scan with an exclusion dictionary.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_with_exclusion_dict(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Some email addresses: gary@example.com, example@example.com'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $infotypes = [
        (new InfoType())->setName('PHONE_NUMBER'),
        (new InfoType())->setName('EMAIL_ADDRESS'),
        (new InfoType())->setName('CREDIT_CARD_NUMBER'),
    ];

    // Exclude matches from the specified excludedMatchList.
    $excludedMatchList = (new Dictionary())
        ->setWordList((new WordList())
            ->setWords(['example@example.com']));
    $matchingType = MatchingType::MATCHING_TYPE_FULL_MATCH;
    $exclusionRule = (new ExclusionRule())
        ->setMatchingType($matchingType)
        ->setDictionary($excludedMatchList);

    // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
    $emailAddress = (new InfoType())
        ->setName('EMAIL_ADDRESS');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$emailAddress])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infotypes)
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

from typing import List

import google.cloud.dlp


def inspect_string_with_exclusion_dict(
    project: str,
    content_string: str,
    exclusion_list: List[str] = ["example@example.com"],
) -> None:
    """Inspects the provided text, avoiding matches specified in the exclusion list

    Uses the Data Loss Prevention API to omit matches on EMAIL_ADDRESS if they are
    in the specified exclusion list.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        exclusion_list: The list of strings to ignore matches on

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "EMAIL_ADDRESS"}]

    # Construct a rule set that will only match on EMAIL_ADDRESS
    # if the match text is not in the exclusion list.
    rule_set = [
        {
            "info_types": info_types_to_locate,
            "rules": [
                {
                    "exclusion_rule": {
                        "dictionary": {"word_list": {"words": exclusion_list}},
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": info_types_to_locate,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Lihat panduan memulai JSON untuk mengetahui informasi selengkapnya tentang penggunaan DLP API dengan JSON.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"EMAIL_ADDRESS"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"EMAIL_ADDRESS"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "dictionary":{
                  "wordList":{
                    "words":[
                      "example@example.com"
                    ]
                  }
                },
                "matchingType": "MATCHING_TYPE_FULL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Menghapus alamat email yang diakhiri dengan domain tertentu dari pemindaian pendeteksi EMAIL_ADDRESS

Cuplikan dan kode JSON berikut dalam beberapa bahasa mengilustrasikan cara menunjukkan ke Perlindungan Data Sensitif menggunakan InspectConfig bahwa deteksi ini harus menghindari pencocokan pada alamat email apa pun yang diakhiri dengan "@example.com" dalam pemindaian yang menggunakan EMAIL_ADDRESS detektor infoType:

C#

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


using System;
using System.Collections.Generic;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringWithExclusionRegex
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, string excludedRegex)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteContentItem };

        var infoTypes = new string[] { "PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER" }.Select(it => new InfoType { Name = it });

        var exclusionRule = new ExclusionRule
        {
            MatchingType = MatchingType.FullMatch,
            Regex = new CustomInfoType.Types.Regex { Pattern = excludedRegex }
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "EMAIL_ADDRESS" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringWithExclusionRegex inspects a string excluding REGEX matches
// in this function specifically the function omits email addresses ending with a specific
// domain from EMAIL_ADDRESS detector scan.
func inspectStringWithExclusionRegex(w io.Writer, projectID, textToInspect, excludedRegex string) error {
	// projectID := "my-project-id"
	// textToInspect := "Some email addresses: gary@example.com, bob@example.org"
	// excludedRegex := ".+@example.com"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "PHONE_NUMBER"},
		{Name: "EMAIL_ADDRESS"},
		{Name: "CREDIT_CARD_NUMBER"},
	}

	// Exclude matches from the specified excludedMatchList.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Regex{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: excludedRegex,
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_FULL_MATCH,
	}

	// Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "EMAIL_ADDRESS"},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes:    infoTypes,
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class InspectStringWithExclusionRegex {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Some email addresses: gary@example.com, bob@example.org";
    String excludedRegex = ".+@example.com";
    inspectStringWithExclusionRegex(projectId, textToInspect, excludedRegex);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringWithExclusionRegex(
      String projectId, String textToInspect, String excludedRegex) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName : new String[] {"PHONE_NUMBER", "EMAIL_ADDRESS", "CREDIT_CARD_NUMBER"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Exclude matches from the specified excludedMatchList.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setMatchingType(MatchingType.MATCHING_TYPE_FULL_MATCH)
              .setRegex(Regex.newBuilder().setPattern(excludedRegex))
              .build();

      // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("EMAIL_ADDRESS"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Some email addresses: gary@example.com, bob@example.org';

// Exclusion Regex
// const exclusionRegex = '.+@example.com';

async function inspectStringMultipleRules() {
  // Specify the type and content to be inspected.
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Info Types for inspection
  const infoTypes = [{name: 'EMAIL_ADDRESS'}];

  // Construct a exclusion rule that uses a regex pattern
  const exclusionRule = {
    regex: {pattern: exclusionRegex},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
  };

  // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
  const ruleSet = [
    {
      infoTypes: infoTypes,
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringMultipleRules();

PHP

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string, excluding REGEX matches
 * Omit email addresses ending with a specific domain from an EMAIL_ADDRESS detector scan.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_with_exclusion_regex(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Some email addresses: gary@example.com, bob@example.org'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $infotypes = [
        (new InfoType())->setName('PHONE_NUMBER'),
        (new InfoType())->setName('EMAIL_ADDRESS'),
        (new InfoType())->setName('CREDIT_CARD_NUMBER'),
    ];

    // Exclude matches from the specified excludedRegex.
    $excludedRegex = '.+@example.com';
    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_FULL_MATCH)
        ->setRegex((new Regex())
            ->setPattern($excludedRegex));

    // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([
            (new InfoType())
                ->setName('EMAIL_ADDRESS')
        ])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infotypes)
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import google.cloud.dlp


def inspect_string_with_exclusion_regex(
    project: str, content_string: str, exclusion_regex: str = ".+@example.com"
) -> None:
    """Inspects the provided text, avoiding matches specified in the exclusion regex

    Uses the Data Loss Prevention API to omit matches on EMAIL_ADDRESS if they match
    the specified exclusion regex.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        exclusion_regex: The regular expression to exclude matches on

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "EMAIL_ADDRESS"}]

    # Construct a rule set that will only match on EMAIL_ADDRESS
    # if the specified regex doesn't also match.
    rule_set = [
        {
            "info_types": info_types_to_locate,
            "rules": [
                {
                    "exclusion_rule": {
                        "regex": {"pattern": exclusion_regex},
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": info_types_to_locate,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Lihat panduan memulai JSON untuk mengetahui informasi selengkapnya tentang penggunaan DLP API dengan JSON.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"EMAIL_ADDRESS"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"EMAIL_ADDRESS"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "regex":{
                  "pattern":".+@example.com"
                },
                "matchingType": "MATCHING_TYPE_FULL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Menghapus pencocokan pemindaian yang menyertakan substring "TEST"

Cuplikan dan kode JSON berikut dalam beberapa bahasa mengilustrasikan cara menunjukkan ke Perlindungan Data Sensitif menggunakan InspectConfig bahwa InspectConfig harus mengecualikan temuan apa pun yang menyertakan token "TEST" dari daftar infoTypes yang ditentukan.

Perhatikan bahwa ini cocok dengan "TEST" sebagai token, bukan substring, sehingga meskipun sesuatu seperti "TEST@email.com" akan cocok, "TESTER@email.com" tidak akan cocok. Jika pencocokan pada substring diinginkan, gunakan ekspresi reguler dalam aturan pengecualian, bukan kamus.

C#

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


using System;
using System.Collections.Generic;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringWithExclusionDictSubstring
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, List<String> excludedSubstringList)
    {
        var dlp = DlpServiceClient.Create();

        var byteItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteItem };

        var infoTypes = new string[]
        {
            "EMAIL_ADDRESS",
            "DOMAIN_NAME",
            "PHONE_NUMBER",
            "PERSON_NAME"
        }.Select(it => new InfoType { Name = it });

        var exclusionRule = new ExclusionRule
        {
            MatchingType = MatchingType.PartialMatch,
            Dictionary = new CustomInfoType.Types.Dictionary
            {
                WordList = new CustomInfoType.Types.Dictionary.Types.WordList
                {
                    Words = { excludedSubstringList }
                }
            }
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { infoTypes },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringWithExclusionDictSubstring inspects a string
// with an exclusion dictionary substring
func inspectStringWithExclusionDictSubstring(w io.Writer, projectID, textToInspect string, excludedSubString []string) error {
	// projectID := "my-project-id"
	// textToInspect := "Some email addresses: gary@example.com, TEST@example.com"
	// excludedSubString := []string{"TEST"}

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "EMAIL_ADDRESS"},
		{Name: "DOMAIN_NAME"},
		{Name: "PHONE_NUMBER"},
		{Name: "PERSON_NAME"},
	}

	// Exclude partial matches from the specified excludedSubstringList.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Dictionary{
			Dictionary: &dlppb.CustomInfoType_Dictionary{
				Source: &dlppb.CustomInfoType_Dictionary_WordList_{
					WordList: &dlppb.CustomInfoType_Dictionary_WordList{
						Words: excludedSubString,
					},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleSet that applies the exclusion rule to the EMAIL_ADDRESSES infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: infoTypes,
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes:    infoTypes,
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary.WordList;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.Arrays;
import java.util.List;

public class InspectStringWithExclusionDictSubstring {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Some email addresses: gary@example.com, TEST@example.com";
    List<String> excludedSubstringList = Arrays.asList("TEST");
    inspectStringWithExclusionDictSubstring(projectId, textToInspect, excludedSubstringList);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringWithExclusionDictSubstring(
      String projectId, String textToInspect, List<String> excludedSubstringList)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName :
          new String[] {"EMAIL_ADDRESS", "DOMAIN_NAME", "PHONE_NUMBER", "PERSON_NAME"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Exclude partial matches from the specified excludedSubstringList.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .setDictionary(
                  Dictionary.newBuilder()
                      .setWordList(WordList.newBuilder().addAllWords(excludedSubstringList)))
              .build();

      // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addAllInfoTypes(infoTypes)
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Some email addresses: gary@example.com, TEST@example.com';

// List of substrings to be used for exclusion
// const excludedSubstringList = ['Test'];

async function inspectStringExclusionDictSubstr() {
  // Specify the type and content to be inspected.
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Specify the type of info the inspection will look for.
  // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
  const infoTypes = [
    {name: 'EMAIL_ADDRESS'},
    {name: 'DOMAIN_NAME'},
    {name: 'PHONE_NUMBER'},
    {name: 'PERSON_NAME'},
  ];

  // Exclude partial matches from the specified excludedSubstringList.
  const exclusionRule = {
    dictionary: {wordList: {words: excludedSubstringList}},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
  const ruleSet = [
    {
      infoTypes: infoTypes,
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringExclusionDictSubstr();

PHP

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary\WordList;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string with an exclusion dictionary substring
 * Omit scan matches that include the substring "TEST".
 *
 * @param string $projectId                 The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect             The string to inspect.
 * @param array  $excludedSubStringArray    The sub string to excluded.
 */
function inspect_string_with_exclusion_dict_substring(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Some email addresses: gary@example.com, TEST@example.com',
    array  $excludedSubStringArray = ['Test']
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $infotypes = [
        (new InfoType())->setName('PHONE_NUMBER'),
        (new InfoType())->setName('EMAIL_ADDRESS'),
        (new InfoType())->setName('DOMAIN_NAME'),
        (new InfoType())->setName('PERSON_NAME'),
    ];

    // Exclude matches from the specified excludedSubstringList.
    $excludedSubstringList = (new Dictionary())
        ->setWordList((new WordList())
            ->setWords($excludedSubStringArray));

    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setDictionary($excludedSubstringList);

    // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes($infotypes)
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infotypes)
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

from typing import List

import google.cloud.dlp


def inspect_string_with_exclusion_dict_substring(
    project: str, content_string: str, exclusion_list: List[str] = ["TEST"]
) -> None:
    """Inspects the provided text, avoiding matches that contain excluded tokens

    Uses the Data Loss Prevention API to omit matches if they include tokens
    in the specified exclusion list.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        exclusion_list: The list of strings to ignore partial matches on

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "EMAIL_ADDRESS"}, {"name": "DOMAIN_NAME"}]

    # Construct a rule set that will only match if the match text does not
    # contains tokens from the exclusion list.
    rule_set = [
        {
            "info_types": info_types_to_locate,
            "rules": [
                {
                    "exclusion_rule": {
                        "dictionary": {"word_list": {"words": exclusion_list}},
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": info_types_to_locate,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Lihat panduan memulai JSON untuk mengetahui informasi selengkapnya tentang penggunaan DLP API dengan JSON.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"EMAIL_ADDRESS"
        },
        {
          "name":"DOMAIN_NAME"
        },
        {
          "name":"PHONE_NUMBER"
        },
        {
          "name":"PERSON_NAME"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"EMAIL_ADDRESS"
            },
            {
              "name":"DOMAIN_NAME"
            },
            {
              "name":"PHONE_NUMBER"
            },
            {
              "name":"PERSON_NAME"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "dictionary":{
                  "wordList":{
                    "words":[
                      "TEST"
                    ]
                  }
                },
                "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Menghapus pencocokan pemindaian yang menyertakan substring "Jimmy" dari pemindaian pendeteksi infoType kustom

Cuplikan dan kode JSON berikut dalam beberapa bahasa mengilustrasikan cara menunjukkan ke Perlindungan Data Sensitif menggunakan InspectConfig bahwa nama "Jimmy" tidak boleh cocok dalam pemindaian yang menggunakan pendeteksi ekspresi reguler kustom yang ditentukan:

C#

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


using System;
using System.Collections.Generic;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringCustomExcludingSubstring
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, string customDetectorPattern, List<String> excludedSubstringList)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteContentItem };

        var infoType = new InfoType
        {
            Name = "CUSTOM_NAME_DETECTOR"
        };
        var customInfoType = new CustomInfoType
        {
            InfoType = infoType,
            Regex = new CustomInfoType.Types.Regex { Pattern = customDetectorPattern }
        };

        var exclusionRule = new ExclusionRule
        {
            MatchingType = MatchingType.PartialMatch,
            Dictionary = new CustomInfoType.Types.Dictionary
            {
                WordList = new CustomInfoType.Types.Dictionary.Types.WordList
                {
                    Words = { excludedSubstringList }
                }
            }
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { infoType },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            CustomInfoTypes = { customInfoType },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringCustomExcludingSubstring inspects a string for sensitive data, excluding a custom substring
func inspectStringCustomExcludingSubstring(w io.Writer, projectID, textToInspect, customDetectorPattern string, excludedSubstringList []string) error {
	// projectId := "your-project-id"
	// textToInspect := "Name: Doe, John. Name: Example, Jimmy"
	// customDetectorPattern := "[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}"
	// excludedSubstringList := []string{"Jimmy"}

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	infoType := &dlppb.InfoType{
		Name: "CUSTOM_NAME_DETECTOR",
	}

	customInfotype := &dlppb.CustomInfoType{
		InfoType: infoType,
		Type: &dlppb.CustomInfoType_Regex_{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: customDetectorPattern,
			},
		},
	}

	// Exclude partial matches from the specified excludedSubstringList.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Dictionary{
			Dictionary: &dlppb.CustomInfoType_Dictionary{
				Source: &dlppb.CustomInfoType_Dictionary_WordList_{
					WordList: &dlppb.CustomInfoType_Dictionary_WordList{
						Words: excludedSubstringList,
					},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			infoType,
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			CustomInfoTypes: []*dlppb.CustomInfoType{
				customInfotype,
			},
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary.WordList;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.Arrays;
import java.util.List;

public class InspectStringCustomExcludingSubstring {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Name: Doe, John. Name: Example, Jimmy";
    String customDetectorPattern = "[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}";
    List<String> excludedSubstringList = Arrays.asList("Jimmy");
    inspectStringCustomExcludingSubstring(
        projectId, textToInspect, customDetectorPattern, excludedSubstringList);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringCustomExcludingSubstring(
      String projectId,
      String textToInspect,
      String customDetectorPattern,
      List<String> excludedSubstringList)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      InfoType infoType = InfoType.newBuilder().setName("CUSTOM_NAME_DETECTOR").build();
      CustomInfoType customInfoType =
          CustomInfoType.newBuilder()
              .setInfoType(infoType)
              .setRegex(Regex.newBuilder().setPattern(customDetectorPattern))
              .build();

      // Exclude partial matches from the specified excludedSubstringList.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .setDictionary(
                  Dictionary.newBuilder()
                      .setWordList(WordList.newBuilder().addAllWords(excludedSubstringList)))
              .build();

      // Construct a ruleset that applies the exclusion rule to the EMAIL_ADDRESSES infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(infoType)
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addCustomInfoTypes(customInfoType)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Name: Doe, John. Name: Example, Jimmy';

// Words to exclude
// const excludedWords = ['Jimmy'];

async function inspectStringCustomExclusionDict() {
  // Specify the content to be inspected.
  const item = {value: string};

  // Specify the type of info the inspection will look for.
  const customInfoTypes = [
    {
      infoType: {name: 'CUSTOM_NAME_DETECTOR'},
      regex: {pattern: '[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}'},
    },
  ];

  // Exclude partial matches from the specified excludedSubstringList.
  const exclusionRUle = {
    dictionary: {wordList: {words: excludedWords}},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // Construct a rule set that will only match if the match text does not
  // contains tokens from the exclusion list.
  const ruleSet = [
    {
      infoTypes: [{name: 'CUSTOM_NAME_DETECTOR'}],
      rules: [
        {
          exclusionRule: exclusionRUle,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    customInfoTypes: customInfoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringCustomExclusionDict();

PHP

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary\WordList;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, excluding a custom substring
 * Illustrates how to use an InspectConfig to instruct Cloud DLP to avoid matching on the name "Jimmy" in a scan that uses the specified custom regular expression detector.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_custom_excluding_substring(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Name: Doe, John. Name: Example, Jimmy'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();
    $customDetectorPattern = '[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}';

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $customerNameDetector = (new InfoType())
        ->setName('CUSTOM_NAME_DETECTOR');
    $customInfoType = (new CustomInfoType())
        ->setInfoType($customerNameDetector)
        ->setRegex((new Regex())
            ->setPattern($customDetectorPattern));

    // Exclude partial matches from the specified excludedSubstringList.
    $excludedSubstringList = (new Dictionary())
        ->setWordList((new WordList())
            ->setWords(['Jimmy']));

    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setDictionary($excludedSubstringList);

    // Construct a ruleset that applies the exclusion rule.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$customerNameDetector])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setCustomInfoTypes([$customInfoType])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

from typing import List

import google.cloud.dlp


def inspect_string_custom_excluding_substring(
    project: str, content_string: str, exclusion_list: List[str] = ["jimmy"]
) -> None:
    """Inspects the provided text with a custom detector, avoiding matches on specific tokens

    Uses the Data Loss Prevention API to omit matches on a custom detector
    if they include tokens in the specified exclusion list.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        exclusion_list: The list of strings to ignore matches on

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a custom regex detector for names
    custom_info_types = [
        {
            "info_type": {"name": "CUSTOM_NAME_DETECTOR"},
            "regex": {"pattern": "[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}"},
        }
    ]

    # Construct a rule set that will only match if the match text does not
    # contains tokens from the exclusion list.
    rule_set = [
        {
            "info_types": [{"name": "CUSTOM_NAME_DETECTOR"}],
            "rules": [
                {
                    "exclusion_rule": {
                        "dictionary": {"word_list": {"words": exclusion_list}},
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "custom_info_types": custom_info_types,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Lihat panduan memulai JSON untuk mengetahui informasi selengkapnya tentang penggunaan DLP API dengan JSON.

...
    "inspectConfig":{
      "customInfoTypes":[
        {
          "infoType":{
            "name":"CUSTOM_NAME_DETECTOR"
          },
          "regex":{
            "pattern":"[A-Z][a-z]{1,15}, [A-Z][a-z]{1,15}"
          }
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"CUSTOM_NAME_DETECTOR"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "dictionary":{
                  "wordList":{
                    "words":[
                      "Jimmy"
                    ]
                  }
                },
                "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Menghapus kecocokan pemindaian dari pemindaian pendeteksi PERSON_NAME yang tumpang-tindih dengan pendeteksi kustom

Dalam skenario ini, pengguna tidak ingin kecocokan dari pemindaian Perlindungan Data Sensitif menggunakan detektor bawaan PERSON_NAME ditampilkan jika kecocokan juga akan dikorelasi dalam pemindaian menggunakan detektor ekspresi reguler kustom yang ditentukan di bagian pertama cuplikan.

Cuplikan dan kode JSON berikut dalam beberapa bahasa menentukan pendeteksi ekspresi reguler kustom dan aturan pengecualian di InspectConfig. Pendeteksi ekspresi reguler kustom menentukan nama yang akan dikecualikan dari hasil. Aturan pengecualian menentukan bahwa jika ada hasil yang ditampilkan dari pemindaian untuk PERSON_NAME juga akan dicocokkan oleh pendeteksi ekspresi reguler kustom, hasil tersebut akan dihilangkan. Perhatikan bahwa VIP_DETECTOR dalam hal ini ditandai sebagai EXCLUSION_TYPE_EXCLUDE, sehingga tidak akan menghasilkan hasil. Hal ini hanya akan memengaruhi hasil yang dihasilkan oleh detektor PERSON_NAME.

C#

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


using System;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectStringCustomOmitOverlap
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect)
    {
        var dlp = DlpServiceClient.Create();

        var byteItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem { ByteItem = byteItem };

        var customInfoType = new CustomInfoType
        {
            InfoType = new InfoType { Name = "VIP_DETECTOR" },
            Regex = new CustomInfoType.Types.Regex { Pattern = "Larry Page|Sergey Brin" },
            ExclusionType = ExclusionType.Exclude
        };

        var exclusionRule = new ExclusionRule
        {
            ExcludeInfoTypes = new ExcludeInfoTypes { InfoTypes = { customInfoType.InfoType } },
            MatchingType = MatchingType.FullMatch
        };

        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "PERSON_NAME" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        var config = new InspectConfig
        {
            InfoTypes = { new InfoType { Name = "PERSON_NAME" } },
            CustomInfoTypes = { customInfoType },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringCustomOmitOverlap inspects a string for sensitive data with omitting custom matches
func inspectStringCustomOmitOverlap(w io.Writer, projectID, textToInspect, customInfoTypeName, infoTypeName, regex string) error {
	// projectID := "my-project-id"
	// textToInspect := "Name: Jane Doe. Name: Larry Page."
	// customInfoTypeName := "VIP_DETECTOR"
	// infoTypeName := "PERSON_NAME"
	// regex := "Larry Page|Sergey Brin"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}
	// Construct the custom infoType.
	customInfotype := &dlppb.CustomInfoType{
		InfoType: &dlppb.InfoType{
			Name: customInfoTypeName,
		},
		Type: &dlppb.CustomInfoType_Regex_{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: regex,
			},
		},
		ExclusionType: dlppb.CustomInfoType_EXCLUSION_TYPE_EXCLUDE,
	}

	// Exclude matches that also match the custom infoType.
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_ExcludeInfoTypes{
			ExcludeInfoTypes: &dlppb.ExcludeInfoTypes{
				InfoTypes: []*dlppb.InfoType{
					customInfotype.GetInfoType(),
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_FULL_MATCH,
	}

	// Construct a ruleSet that applies the exclusion rule to the PERSON_NAME infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: infoTypeName},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the configuration for the Inspect request, including the ruleSet.
	config := &dlppb.InspectConfig{
		InfoTypes: []*dlppb.InfoType{
			{Name: infoTypeName},
		},
		CustomInfoTypes: []*dlppb.CustomInfoType{
			customInfotype,
		},
		IncludeQuote: true,
		RuleSet: []*dlppb.InspectionRuleSet{
			ruleSet,
		},
	}

	// Create a configured request.
	req := &dlppb.InspectContentRequest{
		Parent:        fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:          contentItem,
		InspectConfig: config,
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Parse the response and process results
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.CustomInfoType.ExclusionType;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.ExcludeInfoTypes;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;

public class InspectStringCustomOmitOverlap {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "Name: Jane Doe. Name: Larry Page.";
    inspectStringCustomOmitOverlap(projectId, textToInspect);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringCustomOmitOverlap(String projectId, String textToInspect)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Construct the custom infotype.
      CustomInfoType customInfoType =
          CustomInfoType.newBuilder()
              .setInfoType(InfoType.newBuilder().setName("VIP_DETECTOR"))
              .setRegex(Regex.newBuilder().setPattern("Larry Page|Sergey Brin"))
              .setExclusionType(ExclusionType.EXCLUSION_TYPE_EXCLUDE)
              .build();

      // Exclude matches that also match the custom infotype.
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setExcludeInfoTypes(
                  ExcludeInfoTypes.newBuilder().addInfoTypes(customInfoType.getInfoType()))
              .setMatchingType(MatchingType.MATCHING_TYPE_FULL_MATCH)
              .build();

      // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .addCustomInfoTypes(customInfoType)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'Name: Jane Doe. Name: Larry Page.';

async function inspectStringCustomOmitOverlap() {
  // Construct item to inspect
  const item = {value: string};

  // Construct a custom regex detector for names
  const customInfoTypes = [
    {
      infoType: {name: 'VIP_DETECTOR'},
      regex: {pattern: 'Larry Page|Sergey Brin'},
      exclusionType:
        DLP.protos.google.privacy.dlp.v2.CustomInfoType.ExclusionType
          .EXCLUSION_TYPE_EXCLUDE,
    },
  ];

  // Construct a exclusion rule
  const exclusionRule = {
    excludeInfoTypes: {
      infoTypes: [{name: 'VIP_DETECTOR'}],
    },
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
  };

  // Construct a rule set that will only match if the match text does not
  // contains Info type matches.
  const ruleSet = [
    {
      infoTypes: [{name: 'PERSON_NAME'}],
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the inspect configuration
  const inspectConfig = {
    infoTypes: [{name: 'PERSON_NAME'}],
    customInfoTypes: customInfoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Combine configurations into a request for the service.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);

  // Print Findings
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringCustomOmitOverlap();

PHP

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType;
use Google\Cloud\Dlp\V2\CustomInfoType\ExclusionType;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\ExcludeInfoTypes;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, omitting custom matches
 * Omit scan matches from a PERSON_NAME detector scan that overlap with a custom detector.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_custom_omit_overlap(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'Name: Jane Doe. Name: Larry Page.'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $vipDetector = (new InfoType())
        ->setName('VIP_DETECTOR');
    $pattern = 'Larry Page|Sergey Brin';
    $customInfoType = (new CustomInfoType())
        ->setInfoType($vipDetector)
        ->setRegex((new Regex())
            ->setPattern($pattern))
        ->setExclusionType(ExclusionType::EXCLUSION_TYPE_EXCLUDE);

    // Exclude matches that also match the custom infotype.
    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_FULL_MATCH)
        ->setExcludeInfoTypes((new ExcludeInfoTypes())
                ->setInfoTypes([$customInfoType->getInfoType()])
        );

    // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
    $personName = (new InfoType())
        ->setName('PERSON_NAME');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$personName])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes([$personName])
        ->setCustomInfoTypes([$customInfoType])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import google.cloud.dlp


def inspect_string_custom_omit_overlap(project: str, content_string: str) -> None:
    """Matches PERSON_NAME and a custom detector,
    but if they overlap only matches the custom detector

    Uses the Data Loss Prevention API to omit matches on a built-in detector
    if they overlap with matches from a custom detector

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a custom regex detector for names
    custom_info_types = [
        {
            "info_type": {"name": "VIP_DETECTOR"},
            "regex": {"pattern": "Larry Page|Sergey Brin"},
            "exclusion_type": google.cloud.dlp_v2.CustomInfoType.ExclusionType.EXCLUSION_TYPE_EXCLUDE,
        }
    ]

    # Construct a rule set that will exclude PERSON_NAME matches
    # that overlap with VIP_DETECTOR matches
    rule_set = [
        {
            "info_types": [{"name": "PERSON_NAME"}],
            "rules": [
                {
                    "exclusion_rule": {
                        "exclude_info_types": {
                            "info_types": [{"name": "VIP_DETECTOR"}]
                        },
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_FULL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": [{"name": "PERSON_NAME"}],
        "custom_info_types": custom_info_types,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Lihat panduan memulai JSON untuk mengetahui informasi selengkapnya tentang penggunaan DLP API dengan JSON.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"PERSON_NAME"
        }
      ],
      "customInfoTypes":[
        {
          "infoType":{
            "name":"VIP_DETECTOR"
          },
          "regex":{
            "pattern":"Dana Williams|Quinn Garcia"
          },
          "exclusionType":"EXCLUSION_TYPE_EXCLUDE"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"PERSON_NAME"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "excludeInfoTypes":{
                  "infoTypes":[
                    {
                      "name":"VIP_DETECTOR"
                    }
                  ]
                },
                "matchingType": "MATCHING_TYPE_FULL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Menghapus kecocokan pada detektor PERSON_NAME jika juga cocok dengan detektor EMAIL_ADDRESS

Cuplikan dan kode JSON berikut dalam beberapa bahasa mengilustrasikan cara menunjukkan ke Perlindungan Data Sensitif menggunakan InspectConfig bahwa hanya boleh menampilkan satu kecocokan jika kecocokan untuk detektor PERSON_NAME tumpang-tindih dengan kecocokan untuk detektor EMAIL_ADDRESS. Tindakan ini dilakukan untuk menghindari situasi saat alamat email seperti "james@example.com" cocok di pendeteksi PERSON_NAME dan EMAIL_ADDRESS.

C#

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


using System;
using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;

public class InspectStringOmitOverlap
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect)
    {
        // Initialize client that will be used to send requests. This client only needs to be created
        // once, and can be reused for multiple requests. After completing all of your requests, call
        // the "close" method on the client to safely clean up any remaining background resources.
        var dlp = DlpServiceClient.Create();

        // Specify the type and content to be inspected.
        var byteItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };
        var contentItem = new ContentItem { ByteItem = byteItem };

        // Specify the type of info the inspection will look for.
        // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
        var infoTypes = new string[] { "PERSON_NAME", "EMAIL_ADDRESS" }.Select(it => new InfoType { Name = it });

        // Exclude EMAIL_ADDRESS matches
        var exclusionRule = new ExclusionRule
        {
            ExcludeInfoTypes = new ExcludeInfoTypes { InfoTypes = { new InfoType { Name = "EMAIL_ADDRESS" } } },
            MatchingType = MatchingType.PartialMatch
        };

        // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
        // If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
        // be excluded.
        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "PERSON_NAME" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        // Construct the configuration for the Inspect request, including the ruleset.
        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        // Construct the Inspect request to be sent by the client.
        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        // Use the client to send the API request.
        var response = dlp.InspectContent(request);

        // Parse the response and process results
        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringOmitOverlap inspects a string for sensitive data and
// omitting overlapping matches on person and email
func inspectStringOmitOverlap(w io.Writer, projectID, textToInspect string) error {
	// projectID := "my-project-id"
	// textToInspect := "gary@example.com"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "PERSON_NAME"},
		{Name: "EMAIL_ADDRESS"},
	}

	// Exclude EMAIL_ADDRESS matches
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_ExcludeInfoTypes{
			ExcludeInfoTypes: &dlppb.ExcludeInfoTypes{
				InfoTypes: []*dlppb.InfoType{
					{Name: "EMAIL_ADDRESS"},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleSet that applies the exclusion rule to the PERSON_NAME infoType.
	// If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
	// be excluded.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "PERSON_NAME"},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes:    infoTypes,
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.ExcludeInfoTypes;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class InspectStringOmitOverlap {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "james@example.com";
    inspectStringOmitOverlap(projectId, textToInspect);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringOmitOverlap(String projectId, String textToInspect)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName : new String[] {"PERSON_NAME", "EMAIL_ADDRESS"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Exclude EMAIL_ADDRESS matches
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setExcludeInfoTypes(
                  ExcludeInfoTypes.newBuilder()
                      .addInfoTypes(InfoType.newBuilder().setName("EMAIL_ADDRESS")))
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .build();

      // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
      // If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
      // be excluded.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'james@example.com';

async function inspectStringWithoutOverlapPersonEmail() {
  // Construct item to inspect
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Specify the type of info the inspection will look for.
  const infoTypes = [{name: 'PERSON_NAME'}, {name: 'EMAIL_ADDRESS'}];

  // Exclude EMAIL_ADDRESS matches
  const exclusionRule = {
    excludeInfoTypes: {
      infoTypes: [{name: 'EMAIL_ADDRESS'}],
    },
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
  // If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
  // be excluded.
  const ruleSet = [
    {
      infoTypes: [{name: 'PERSON_NAME'}],
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);

  // Print Findings
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringWithoutOverlapPersonEmail();

PHP

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\ExcludeInfoTypes;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, omitting overlapping matches on person and email
 * Omit matches on a PERSON_NAME detector if also matched by an EMAIL_ADDRESS detector.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_omit_overlap(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'james@example.org is an email.'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $personName = (new InfoType())
        ->setName('PERSON_NAME');
    $emailAddress = (new InfoType())
        ->setName('EMAIL_ADDRESS');
    $infoTypes = [$personName, $emailAddress];

    // Exclude EMAIL_ADDRESS matches
    $exclusionRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setExcludeInfoTypes((new ExcludeInfoTypes())
                ->setInfoTypes([$emailAddress])
        );

    // Construct a ruleset that applies the exclusion rule to the PERSON_NAME infotype.
    // If a PERSON_NAME match overlaps with an EMAIL_ADDRESS match, the PERSON_NAME match will
    // be excluded.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$personName])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infoTypes)
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import google.cloud.dlp


def inspect_string_omit_overlap(
    project: str,
    content_string: str,
) -> None:
    """Matches PERSON_NAME and EMAIL_ADDRESS, but not both.

    Uses the Data Loss Prevention API omit matches on PERSON_NAME if the
    EMAIL_ADDRESS detector also matches.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "PERSON_NAME"}, {"name": "EMAIL_ADDRESS"}]

    # Construct the configuration dictionary that will only match on PERSON_NAME
    # if the EMAIL_ADDRESS doesn't also match. This configuration helps reduce
    # the total number of findings when there is a large overlap between different
    # infoTypes.
    inspect_config = {
        "info_types": info_types_to_locate,
        "rule_set": [
            {
                "info_types": [{"name": "PERSON_NAME"}],
                "rules": [
                    {
                        "exclusion_rule": {
                            "exclude_info_types": {
                                "info_types": [{"name": "EMAIL_ADDRESS"}]
                            },
                            "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
                        }
                    }
                ],
            }
        ],
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Lihat panduan memulai JSON untuk mengetahui informasi selengkapnya tentang penggunaan DLP API dengan JSON.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"PERSON_NAME"
        },
        {
          "name":"EMAIL_ADDRESS"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"PERSON_NAME"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "excludeInfoTypes":{
                  "infoTypes":[
                    {
                      "name":"EMAIL_ADDRESS"
                    }
                  ]
                },
                "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Menghapus kecocokan pada nama domain yang merupakan bagian dari alamat email dalam pemindaian pendeteksi DOMAIN_NAME

Cuplikan dan kode JSON berikut dalam beberapa bahasa mengilustrasikan cara menunjukkan ke Perlindungan Data Sensitif menggunakan InspectConfig bahwa hanya boleh menampilkan kecocokan untuk pemindaian detector DOMAIN_NAME jika kecocokan tidak tumpang-tindih dengan kecocokan dalam pemindaian detector EMAIL_ADDRESS. Dalam skenario ini, pemindaian utama adalah pemindaian detektor DOMAIN_NAME. Pengguna tidak ingin kecocokan nama domain ditampilkan dalam temuan jika nama domain digunakan dalam alamat email:

C#

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


using System.Linq;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectStringWithoutOverlap
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect)
    {
        // Initialize client that will be used to send requests. This client only needs to be created
        // once, and can be reused for multiple requests. After completing all of your requests, call
        // the "close" method on the client to safely clean up any remaining background resources.
        var dlp = DlpServiceClient.Create();

        // Specify the type and content to be inspected.
        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };
        var contentItem = new ContentItem
        {
            ByteItem = byteContentItem
        };

        // Specify the type of info the inspection will look for.
        // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
        var infoTypes = new string[] { "DOMAIN_NAME", "EMAIL_ADDRESS" }.Select(it => new InfoType { Name = it });

        // Define a custom info type to exclude email addresses
        var customInfoType = new CustomInfoType
        {
            InfoType = new InfoType { Name = "EMAIL_ADDRESS" },
            ExclusionType = ExclusionType.Exclude
        };

        // Exclude EMAIL_ADDRESS matches
        var exclusionRule = new ExclusionRule
        {
            ExcludeInfoTypes = new ExcludeInfoTypes
            {
                InfoTypes = { new InfoType { Name = "EMAIL_ADDRESS" } }
            },
            MatchingType = MatchingType.PartialMatch
        };

        // Construct a ruleset that applies the exclusion rule to the DOMAIN_NAME infotype.
        // If a DOMAIN_NAME match is part of an EMAIL_ADDRESS match, the DOMAIN_NAME match will
        // be excluded.
        var ruleSet = new InspectionRuleSet
        {
            InfoTypes = { new InfoType { Name = "DOMAIN_NAME" } },
            Rules = { new InspectionRule { ExclusionRule = exclusionRule } }
        };

        // Construct the configuration for the Inspect request, including the ruleset.
        var config = new InspectConfig
        {
            InfoTypes = { infoTypes },
            CustomInfoTypes = { customInfoType },
            IncludeQuote = true,
            RuleSet = { ruleSet }
        };

        // Construct the Inspect request to be sent by the client.
        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = config
        };

        // Use the client to send the API request.
        var response = dlp.InspectContent(request);

        return response;
    }
}

Go

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringWithoutOverlap inspects a string for sensitive data
// and omit overlapping matches on domain and email
func inspectStringWithoutOverlap(w io.Writer, projectID, textToInspect string) error {
	// projectID := "my-project-id"
	// textToInspect := "example.com is a domain, james@example.org is an email."

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Specify the type of info the inspection will look for.
	// See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
	infoTypes := []*dlppb.InfoType{
		{Name: "DOMAIN_NAME"},
		{Name: "EMAIL_ADDRESS"},
	}

	// Define a custom info type to exclude email addresses
	customInfotype := &dlppb.CustomInfoType{
		InfoType: &dlppb.InfoType{
			Name: "EMAIL_ADDRESS",
		},
		ExclusionType: dlppb.CustomInfoType_EXCLUSION_TYPE_EXCLUDE,
	}

	// Exclude EMAIL_ADDRESS matches
	exclusionRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_ExcludeInfoTypes{
			ExcludeInfoTypes: &dlppb.ExcludeInfoTypes{
				InfoTypes: []*dlppb.InfoType{
					{Name: "EMAIL_ADDRESS"},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleSet that applies the exclusion rule to the DOMAIN_NAME infoType.
	// If a DOMAIN_NAME match is part of an EMAIL_ADDRESS match, the DOMAIN_NAME match will
	// be excluded.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "DOMAIN_NAME"},
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_ExclusionRule{
					ExclusionRule: exclusionRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		// Construct the Inspect request to be sent by the client.
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes: infoTypes,
			CustomInfoTypes: []*dlppb.CustomInfoType{
				customInfotype,
			},
			IncludeQuote: true,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil
}

Java

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType;
import com.google.privacy.dlp.v2.CustomInfoType.ExclusionType;
import com.google.privacy.dlp.v2.ExcludeInfoTypes;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;

public class InspectStringWithoutOverlap {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "example.com is a domain, james@example.org is an email.";
    inspectStringWithoutOverlap(projectId, textToInspect);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringWithoutOverlap(String projectId, String textToInspect)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Specify the type of info the inspection will look for.
      // See https://cloud.google.com/dlp/docs/infotypes-reference for complete list of info types.
      List<InfoType> infoTypes = new ArrayList<>();
      for (String typeName : new String[] {"DOMAIN_NAME", "EMAIL_ADDRESS"}) {
        infoTypes.add(InfoType.newBuilder().setName(typeName).build());
      }

      // Define a custom info type to exclude email addresses
      CustomInfoType customInfoType =
          CustomInfoType.newBuilder()
              .setInfoType(InfoType.newBuilder().setName("EMAIL_ADDRESS"))
              .setExclusionType(ExclusionType.EXCLUSION_TYPE_EXCLUDE)
              .build();

      // Exclude EMAIL_ADDRESS matches
      ExclusionRule exclusionRule =
          ExclusionRule.newBuilder()
              .setExcludeInfoTypes(
                  ExcludeInfoTypes.newBuilder()
                      .addInfoTypes(InfoType.newBuilder().setName("EMAIL_ADDRESS")))
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .build();

      // Construct a ruleset that applies the exclusion rule to the DOMAIN_NAME infotype.
      // If a DOMAIN_NAME match is part of an EMAIL_ADDRESS match, the DOMAIN_NAME match will
      // be excluded.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("DOMAIN_NAME"))
              .addRules(InspectionRule.newBuilder().setExclusionRule(exclusionRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addAllInfoTypes(infoTypes)
              .addCustomInfoTypes(customInfoType)
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'example.com is a domain, james@example.org is an email.';

async function inspectStringWithoutOverlap() {
  // Construct item to inspect
  const item = {value: string};

  // The infoTypes of information to match
  const infoTypes = [{name: 'DOMAIN_NAME'}, {name: 'EMAIL_ADDRESS'}];

  // Define a custom info type to exclude email addresses
  const customInfoTypes = [
    {
      infoType: {name: 'EMAIL_ADDRESS'},
      exclusionType:
        DLP.protos.google.privacy.dlp.v2.CustomInfoType.ExclusionType
          .EXCLUSION_TYPE_EXCLUDE,
    },
  ];

  // Construct a exclusion rule
  const exclusionRule = {
    excludeInfoTypes: {
      infoTypes: [{name: 'EMAIL_ADDRESS'}],
    },
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // Construct a rule set with exclusions
  const ruleSet = [
    {
      infoTypes: [{name: 'DOMAIN_NAME'}],
      rules: [
        {
          exclusionRule: exclusionRule,
        },
      ],
    },
  ];

  // Construct the inspect configuration
  const inspectConfig = {
    infoTypes: infoTypes,
    customInfoTypes: customInfoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Combine configurations into a request for the service.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Run request
  const [response] = await dlp.inspectContent(request);

  // Print Findings
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringWithoutOverlap();

PHP

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType;
use Google\Cloud\Dlp\V2\CustomInfoType\ExclusionType;
use Google\Cloud\Dlp\V2\ExcludeInfoTypes;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data, omitting overlapping matches on domain and email
 * Omit matches on domain names that are part of email addresses in a DOMAIN_NAME detector scan.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_without_overlap(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'example.com is a domain, james@example.org is an email.'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Specify the type of info the inspection will look for.
    $domainName = (new InfoType())
        ->setName('DOMAIN_NAME');
    $emailAddress = (new InfoType())
        ->setName('EMAIL_ADDRESS');
    $infoTypes = [$domainName, $emailAddress];

    // Define a custom info type to exclude email addresses
    $customInfoType = (new CustomInfoType())
        ->setInfoType($emailAddress)
        ->setExclusionType(ExclusionType::EXCLUSION_TYPE_EXCLUDE);

    // Exclude EMAIL_ADDRESS matches
    $matchingType = MatchingType::MATCHING_TYPE_PARTIAL_MATCH;

    $exclusionRule = (new ExclusionRule())
        ->setMatchingType($matchingType)
        ->setExcludeInfoTypes((new ExcludeInfoTypes())
            ->setInfoTypes([$customInfoType->getInfoType()])
        );

    // Construct a ruleset that applies the exclusion rule to the DOMAIN_NAME infotype.
    // If a DOMAIN_NAME match is part of an EMAIL_ADDRESS match, the DOMAIN_NAME match will
    // be excluded.
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$domainName])
        ->setRules([
            (new InspectionRule())
                ->setExclusionRule($exclusionRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes($infoTypes)
        ->setCustomInfoTypes([$customInfoType])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf(
                '  Likelihood: %s' . PHP_EOL,
                Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import google.cloud.dlp


def inspect_string_without_overlap(project: str, content_string: str) -> None:
    """Matches EMAIL_ADDRESS and DOMAIN_NAME, but DOMAIN_NAME is omitted
    if it overlaps with EMAIL_ADDRESS

    Uses the Data Loss Prevention API to omit matches of one infotype
    that overlap with another.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a list of infoTypes for DLP to locate in `content_string`. See
    # https://cloud.google.com/dlp/docs/concepts-infotypes for more information
    # about supported infoTypes.
    info_types_to_locate = [{"name": "DOMAIN_NAME"}, {"name": "EMAIL_ADDRESS"}]

    # Define a custom info type to exclude email addresses
    custom_info_types = [
        {
            "info_type": {"name": "EMAIL_ADDRESS"},
            "exclusion_type": google.cloud.dlp_v2.CustomInfoType.ExclusionType.EXCLUSION_TYPE_EXCLUDE,
        }
    ]

    # Construct a rule set that will exclude DOMAIN_NAME matches
    # that overlap with EMAIL_ADDRESS matches
    rule_set = [
        {
            "info_types": [{"name": "DOMAIN_NAME"}],
            "rules": [
                {
                    "exclusion_rule": {
                        "exclude_info_types": {
                            "info_types": [{"name": "EMAIL_ADDRESS"}]
                        },
                        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
                    }
                }
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": info_types_to_locate,
        "custom_info_types": custom_info_types,
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Lihat panduan memulai JSON untuk mengetahui informasi selengkapnya tentang penggunaan DLP API dengan JSON.

...
    "inspectConfig":{
      "infoTypes":[
        {
          "name":"DOMAIN_NAME"
        },
        {
          "name":"EMAIL_ADDRESS"
        }
      ],
      "customInfoTypes":[
        {
          "infoType":{
            "name":"EMAIL_ADDRESS"
          },
          "exclusionType":"EXCLUSION_TYPE_EXCLUDE"
        }
      ],
      "ruleSet":[
        {
          "infoTypes":[
            {
              "name":"DOMAIN_NAME"
            }
          ],
          "rules":[
            {
              "exclusionRule":{
                "excludeInfoTypes":{
                  "infoTypes":[
                    {
                      "name":"EMAIL_ADDRESS"
                    }
                  ]
                },
                "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
              }
            }
          ]
        }
      ]
    }
...

Menghapus kecocokan jika terletak di dekat string

Contoh berikut mengilustrasikan cara mengecualikan kecocokan pada detektor infoType US_SOCIAL_SECURITY_NUMBER jika kata "SKU" berada dalam 10 karakter sebelum atau 10 karakter setelah temuan.

Karena aturan pengecualian, contoh ini tidak mengklasifikasikan 222-22-2222 sebagai kemungkinan nomor Jaminan Sosial AS.

{
  "item": {
    "value": "The customer sent the product SKU 222-22-2222"
  },
  "inspectConfig": {
    "infoTypes": [
      {
        "name": "US_SOCIAL_SECURITY_NUMBER"
      }
    ],
    "ruleSet": [
      {
        "infoTypes": [
          {
            "name": "US_SOCIAL_SECURITY_NUMBER"
          }
        ],
        "rules": [
          {
            "exclusionRule": {
              "excludeByHotword": {
                "hotwordRegex": {
                  "pattern": "(SKU)"
                },
                "proximity": {
                  "windowBefore": 10,
                  "windowAfter": 10
                }
              },
              "matchingType": "MATCHING_TYPE_FULL_MATCH"
            }
          }
        ]
      }
    ],
    "includeQuote": true
  }
}

Menghapus temuan di seluruh kolom data

Contoh berikut mengilustrasikan cara mengecualikan temuan di seluruh kolom data tabel jika nama kolom tersebut cocok dengan ekspresi reguler. Di sini, setiap temuan yang cocok dengan detektor infoType US_SOCIAL_SECURITY_NUMBER akan dikecualikan dari hasil jika temuan tersebut berada di kolom Nomor Jaminan Sosial Palsu.

Contoh ini hanya menampilkan 222-22-2222, karena 111-11-1111 berada di kolom Nomor Jaminan Sosial Palsu.

{
  "item": {
    "table": {
      "headers": [
        {
          "name": "Fake Social Security Number"
        },
        {
          "name": "Real Social Security Number"
        }
      ],
      "rows": [
        {
          "values": [
            {
              "stringValue": "111-11-1111"
            },
            {
              "stringValue": "222-22-2222"
            }
          ]
        }
      ]
    }
  },
  "inspectConfig": {
    "infoTypes": [
      {
        "name": "US_SOCIAL_SECURITY_NUMBER"
      }
    ],
    "includeQuote": true,
    "ruleSet": [
      {
        "infoTypes": [
          {
            "name": "US_SOCIAL_SECURITY_NUMBER"
          }
        ],
        "rules": [
          {
            "exclusionRule": {
              "excludeByHotword": {
                "hotwordRegex": {
                  "pattern": "(Fake Social Security Number)"
                },
                "proximity": {
                  "windowBefore": 1
                }
              },
              "matchingType": "MATCHING_TYPE_FULL_MATCH"
            }
          }
        ]
      }
    ],
    "minLikelihood": "POSSIBLE"
  }
}

Aturan frasa pengaktif

Aturan kata kunci berguna dalam situasi seperti berikut:

Anda ingin mengubah nilai kemungkinan yang ditetapkan untuk memindai kecocokan berdasarkan kedekatan kecocokan dengan kata panas. Misalnya, Anda ingin menetapkan nilai kemungkinan yang lebih tinggi untuk pencocokan pada nama pasien, bergantung pada kedekatan nama dengan kata "pasien".
Saat memeriksa data terstruktur berbentuk tabel, Anda ingin mengubah nilai kemungkinan yang ditetapkan ke kecocokan berdasarkan nama header kolom. Misalnya, Anda ingin menetapkan nilai kemungkinan yang lebih tinggi untuk US_SOCIAL_SECURITY_NUMBER saat ditemukan di kolom dengan header ACCOUNT_ID.

Ringkasan Hotword rules API

Dalam objek InspectionRule Perlindungan Data Sensitif, Anda menentukan objek HotwordRule, yang menyesuaikan kemungkinan temuan dalam kedekatan kata panas tertentu.

Objek InspectionRule dikelompokkan sebagai "kumpulan aturan" dalam objek InspectionRuleSet, bersama dengan daftar detektor infoType yang berlaku untuk kumpulan aturan. Aturan dalam kumpulan aturan diterapkan sesuai urutan yang ditentukan.

Contoh skenario aturan frasa pengaktif

Cuplikan kode berikut mengilustrasikan cara mengonfigurasi Perlindungan Data Sensitif untuk skenario tertentu.

Meningkatkan kemungkinan kecocokan PERSON_NAME jika ada kata kunci panas "pasien" di sekitar

Cuplikan dan kode JSON berikut dalam beberapa bahasa mengilustrasikan penggunaan properti InspectConfig untuk tujuan memindai database medis guna menemukan nama pasien. Anda dapat menggunakan detektor infoType PERSON_NAME bawaan Sensitive Data Protection, tetapi hal itu akan menyebabkan Sensitive Data Protection cocok dengan semua nama orang, bukan hanya nama pasien. Untuk memperbaikinya, Anda dapat menyertakan aturan frasa pengaktif yang mencari kata "pasien" dalam kedekatan karakter tertentu dari karakter pertama dari kemungkinan pencocokan. Kemudian, Anda dapat menetapkan temuan yang cocok dengan pola ini dengan kemungkinan "sangat mungkin", karena sesuai dengan kriteria khusus Anda. Menetapkan Likelihood minimum ke VERY_LIKELY dalam InspectConfig memastikan bahwa hanya kecocokan dengan konfigurasi ini yang ditampilkan dalam temuan.

C#

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using System;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectStringCustomHotword
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect, string customHotword)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem
        {
            ByteItem = byteContentItem
        };

        var hotwordRule = new DetectionRule.Types.HotwordRule
        {
            HotwordRegex = new Regex { Pattern = customHotword },
            Proximity = new DetectionRule.Types.Proximity { WindowBefore = 50 },
            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment { FixedLikelihood = Likelihood.VeryLikely }
        };

        var infoType = new InfoType { Name = "PERSON_NAME" };

        var inspectionRuleSet = new InspectionRuleSet
        {
            InfoTypes = { infoType },
            Rules = { new InspectionRule { HotwordRule = hotwordRule } }
        };

        var inspectConfig = new InspectConfig
        {
            InfoTypes = { infoType },
            IncludeQuote = true,
            RuleSet = { inspectionRuleSet },
            MinLikelihood = Likelihood.VeryLikely
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = inspectConfig
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringCustomHotWord inspects a string from sensitive data by using a custom hot word
func inspectStringCustomHotWord(w io.Writer, projectID, textToInspect, customHotWord, infoTypeName string) error {
	// projectID := "my-project-id"
	// textToInspect := "patient name: John Doe"
	// customHotWord := "patient"
	// infoTypeName := "PERSON_NAME"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	contentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Increase likelihood of matches that have customHotword nearby
	hotwordRule := &dlppb.InspectionRule_HotwordRule{

		HotwordRule: &dlppb.CustomInfoType_DetectionRule_HotwordRule{
			HotwordRegex: &dlppb.CustomInfoType_Regex{
				Pattern: customHotWord,
			},
			Proximity: &dlppb.CustomInfoType_DetectionRule_Proximity{
				WindowBefore: 50,
			},
			LikelihoodAdjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
				Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
					FixedLikelihood: dlppb.Likelihood_VERY_LIKELY,
				},
			},
		},
	}

	// Construct a ruleset that applies the hotword rule to the PERSON_NAME infotype.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: infoTypeName}, //"PERSON_NAME"
		},
		Rules: []*dlppb.InspectionRule{
			{
				Type: &dlppb.InspectionRule_HotwordRule{
					HotwordRule: hotwordRule.HotwordRule,
				},
			},
		},
	}

	// Construct the Inspect request to be sent by the client.
	req := &dlppb.InspectContentRequest{
		Parent: fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:   contentItem,
		InspectConfig: &dlppb.InspectConfig{
			InfoTypes: []*dlppb.InfoType{
				{Name: infoTypeName}, //"PERSON_NAME"
			},
			IncludeQuote:  true,
			MinLikelihood: dlppb.Likelihood_VERY_LIKELY,
			RuleSet: []*dlppb.InspectionRuleSet{
				ruleSet,
			},
		},
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Parse the response and process results
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.HotwordRule;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.LikelihoodAdjustment;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.Proximity;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.Likelihood;
import com.google.privacy.dlp.v2.LocationName;
import com.google.protobuf.ByteString;
import java.io.IOException;

public class InspectStringCustomHotword {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "patient name: John Doe";
    String customHotword = "patient";
    inspectStringCustomHotword(projectId, textToInspect, customHotword);
  }

  // Inspects the provided text.
  public static void inspectStringCustomHotword(
      String projectId, String textToInspect, String customHotword) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Increase likelihood of matches that have customHotword nearby
      HotwordRule hotwordRule =
          HotwordRule.newBuilder()
              .setHotwordRegex(Regex.newBuilder().setPattern(customHotword))
              .setProximity(Proximity.newBuilder().setWindowBefore(50))
              .setLikelihoodAdjustment(
                  LikelihoodAdjustment.newBuilder().setFixedLikelihood(Likelihood.VERY_LIKELY))
              .build();

      // Construct a ruleset that applies the hotword rule to the PERSON_NAME infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME").build())
              .addRules(InspectionRule.newBuilder().setHotwordRule(hotwordRule))
              .build();

      // Construct the configuration for the Inspect request.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME").build())
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .setMinLikelihood(Likelihood.VERY_LIKELY)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'patient name: John Doe';

// Custom hotward
// const customHotword = 'patient';

async function inspectStringCustomHotword() {
  // Specify the type and content to be inspected.
  const item = {
    byteItem: {
      type: DLP.protos.google.privacy.dlp.v2.ByteContentItem.BytesType
        .TEXT_UTF8,
      data: Buffer.from(string, 'utf-8'),
    },
  };

  // Increase likelihood of matches that have customHotword nearby.
  const hotwordRule = {
    hotwordRegex: {
      pattern: customHotword,
    },
    proximity: {
      windowBefore: 50,
    },
    likelihoodAdjustment: {
      fixedLikelihood:
        DLP.protos.google.privacy.dlp.v2.Likelihood.VERY_LIKELY,
    },
  };

  // Construct a ruleset that applies the hotword rule to the PERSON_NAME infotype.
  const ruleSet = [
    {
      infoTypes: [{name: 'PERSON_NAME'}],
      rules: [
        {
          hotwordRule: hotwordRule,
        },
      ],
    },
  ];

  // Construct the configuration for the Inspect request.
  const inspectConfig = {
    infoTypes: [{name: 'PERSON_NAME'}],
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringCustomHotword();

PHP

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\HotwordRule;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\LikelihoodAdjustment;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\Proximity;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;

/**
 * Inspect a string from sensitive data by using a custom hotword
 * Increase the likelihood of a PERSON_NAME match if there is the hotword "patient" nearby. Illustrates using the InspectConfig property for the purpose of scanning a medical database for patient names. You can use Cloud DLP's built-in PERSON_NAME infoType detector, but that causes Cloud DLP to match on all names of people, not just names of patients. To fix this, you can include a hotword rule that looks for the word "patient" within a certain character proximity from the first character of potential matches. You can then assign findings that match this pattern a likelihood of "very likely," since they correspond to your special criteria. Setting the minimum likelihood to VERY_LIKELY within InspectConfig ensures that only matches to this configuration are returned in findings.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_custom_hotword(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'patient name: John Doe'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Construct hotword rules
    $hotwordRule = (new HotwordRule())
        ->setHotwordRegex(
            (new Regex())
                ->setPattern('patient')
        )
        ->setProximity(
            (new Proximity())
                ->setWindowBefore(50)
        )
        ->setLikelihoodAdjustment(
            (new LikelihoodAdjustment())
                ->setFixedLikelihood(Likelihood::VERY_LIKELY)
        );

    // Construct a ruleset that applies the hotword rule to the PERSON_NAME infotype.
    $personName = (new InfoType())
        ->setName('PERSON_NAME');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$personName])
        ->setRules([
            (new InspectionRule())
                ->setHotwordRule($hotwordRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes([$personName])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet])
        ->setMinLikelihood(Likelihood::VERY_LIKELY);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import google.cloud.dlp


def inspect_string_w_custom_hotword(
    project: str, content_string: str, custom_hotword: str = "patient"
) -> None:
    """Uses the Data Loss Prevention API increase likelihood for matches on
       PERSON_NAME if the user specified custom hot-word is present. Only
       includes findings with the increased likelihood by setting a minimum
       likelihood threshold of VERY_LIKELY.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.
        custom_hotword: The custom hot-word used for likelihood boosting.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct a rule set with caller provided hotword, with a likelihood
    # boost to VERY_LIKELY when the hotword are present within the 50 character-
    # window preceding the PII finding.
    hotword_rule = {
        "hotword_regex": {"pattern": custom_hotword},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.VERY_LIKELY
        },
        "proximity": {"window_before": 50},
    }

    rule_set = [
        {
            "info_types": [{"name": "PERSON_NAME"}],
            "rules": [{"hotword_rule": hotword_rule}],
        }
    ]

    # Construct the configuration dictionary with the custom regex info type.
    inspect_config = {
        "rule_set": rule_set,
        "min_likelihood": google.cloud.dlp_v2.Likelihood.VERY_LIKELY,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Lihat panduan memulai JSON untuk mengetahui informasi selengkapnya tentang penggunaan DLP API dengan JSON.

...
  "inspectConfig":{
    "infoTypes":[
      {
        "name":"PERSON_NAME"
      }
    ],
    "ruleSet":[
      {
        "infoTypes":[
          {
            "name":"PERSON_NAME"
          }
        ],
        "rules":[
          {
            "hotwordRule":{
              "hotwordRegex":{
                "pattern":"patient"
              },
              "proximity":{
                "windowBefore":50
              },
              "likelihoodAdjustment":{
                "fixedLikelihood":"VERY_LIKELY"
              }
            }
          }
        ]
      }
    ],
    "minLikelihood":"VERY_LIKELY"
  }
...

Untuk informasi yang lebih mendetail tentang kata kunci panas, lihat Menyesuaikan kemungkinan pencocokan.

Skenario beberapa aturan inspeksi

Cuplikan dan kode JSON InspectConfig berikut dalam beberapa bahasa mengilustrasikan penerapan aturan pengecualian dan kata cepat. Kumpulan aturan cuplikan ini mencakup aturan kata cepat serta aturan pengecualian kamus dan ekspresi reguler. Perhatikan bahwa keempat aturan ditentukan dalam array dalam elemen rules.

C#

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


using System;
using System.Text.RegularExpressions;
using Google.Api.Gax.ResourceNames;
using Google.Cloud.Dlp.V2;
using static Google.Cloud.Dlp.V2.CustomInfoType.Types;

public class InspectStringMultipleRules
{
    public static InspectContentResponse Inspect(string projectId, string textToInspect)
    {
        var dlp = DlpServiceClient.Create();

        var byteContentItem = new ByteContentItem
        {
            Type = ByteContentItem.Types.BytesType.TextUtf8,
            Data = Google.Protobuf.ByteString.CopyFromUtf8(textToInspect)
        };

        var contentItem = new ContentItem
        {
            ByteItem = byteContentItem
        };

        var patientRule = new DetectionRule.Types.HotwordRule
        {
            HotwordRegex = new CustomInfoType.Types.Regex { Pattern = "patient" },
            Proximity = new DetectionRule.Types.Proximity { WindowBefore = 10 },
            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment { FixedLikelihood = Likelihood.VeryLikely }
        };

        var doctorRule = new DetectionRule.Types.HotwordRule
        {
            HotwordRegex = new CustomInfoType.Types.Regex { Pattern = "doctor" },
            Proximity = new DetectionRule.Types.Proximity { WindowBefore = 10 },
            LikelihoodAdjustment = new DetectionRule.Types.LikelihoodAdjustment { FixedLikelihood = Likelihood.Unlikely }
        };

        // Construct exclusion rules
        var quasimodoRule = new ExclusionRule
        {
            Dictionary = new Dictionary { WordList = new Dictionary.Types.WordList { Words = { "Quasimodo" } } },
            MatchingType = MatchingType.PartialMatch
        };

        var redactedRule = new ExclusionRule
        {
            Regex = new CustomInfoType.Types.Regex { Pattern = "REDACTED" },
            MatchingType = MatchingType.PartialMatch
        };

        var infoType = new InfoType { Name = "PERSON_NAME" };

        var inspectionRuleSet = new InspectionRuleSet
        {
            InfoTypes = { infoType },
            Rules =
            {
                new InspectionRule { HotwordRule = patientRule },
                new InspectionRule { HotwordRule = doctorRule},
                new InspectionRule { ExclusionRule = quasimodoRule },
                new InspectionRule { ExclusionRule = redactedRule }
            }
        };

        var inspectConfig = new InspectConfig
        {
            InfoTypes = { infoType },
            IncludeQuote = true,
            RuleSet = { inspectionRuleSet }
        };

        var request = new InspectContentRequest
        {
            Parent = new LocationName(projectId, "global").ToString(),
            Item = contentItem,
            InspectConfig = inspectConfig
        };

        var response = dlp.InspectContent(request);

        Console.WriteLine($"Findings: {response.Result.Findings.Count}");
        foreach (var f in response.Result.Findings)
        {
            Console.WriteLine("\tQuote: " + f.Quote);
            Console.WriteLine("\tInfo type: " + f.InfoType.Name);
            Console.WriteLine("\tLikelihood: " + f.Likelihood);
        }

        return response;
    }
}

Go

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import (
	"context"
	"fmt"
	"io"

	dlp "cloud.google.com/go/dlp/apiv2"
	"cloud.google.com/go/dlp/apiv2/dlppb"
)

// inspectStringMultipleRules inspects the provided text,
// avoiding matches specified in the exclusion list.
// this function implements the both exclusion and hot word rules.
func inspectStringMultipleRules(w io.Writer, projectID, textToInspect string) error {
	// projectID := "my-project-id"
	// textToInspect := "patient: Jane Doe"

	ctx := context.Background()

	// Initialize a client once and reuse it to send multiple requests. Clients
	// are safe to use across goroutines. When the client is no longer needed,
	// call the Close method to cleanup its resources.
	client, err := dlp.NewClient(ctx)
	if err != nil {
		return err
	}

	// Closing the client safely cleans up background resources.
	defer client.Close()

	// Specify the type and content to be inspected.
	ContentItem := &dlppb.ContentItem{
		DataItem: &dlppb.ContentItem_ByteItem{
			ByteItem: &dlppb.ByteContentItem{
				Type: dlppb.ByteContentItem_TEXT_UTF8,
				Data: []byte(textToInspect),
			},
		},
	}

	// Construct the rule that adjust the likelihood of findings
	// within a certain proximity of hot-word("patient").
	patientRule := &dlppb.InspectionRule_HotwordRule{
		HotwordRule: &dlppb.CustomInfoType_DetectionRule_HotwordRule{
			HotwordRegex: &dlppb.CustomInfoType_Regex{
				Pattern: "patient",
			},
			Proximity: &dlppb.CustomInfoType_DetectionRule_Proximity{
				WindowBefore: 10,
			},
			LikelihoodAdjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
				Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
					FixedLikelihood: dlppb.Likelihood_VERY_LIKELY,
				},
			},
		},
	}

	// Construct the rule that adjust the likelihood of findings
	// within a certain proximity of hot-word("doctor").
	doctorRule := &dlppb.InspectionRule_HotwordRule{
		HotwordRule: &dlppb.CustomInfoType_DetectionRule_HotwordRule{
			HotwordRegex: &dlppb.CustomInfoType_Regex{
				Pattern: "doctor",
			},
			Proximity: &dlppb.CustomInfoType_DetectionRule_Proximity{
				WindowBefore: 10,
			},
			LikelihoodAdjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment{
				Adjustment: &dlppb.CustomInfoType_DetectionRule_LikelihoodAdjustment_FixedLikelihood{
					FixedLikelihood: dlppb.Likelihood_UNLIKELY,
				},
			},
		},
	}

	// Construct the exclusion rule that avoids the matches for the specified word list.
	quasimodoRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Dictionary{
			Dictionary: &dlppb.CustomInfoType_Dictionary{
				Source: &dlppb.CustomInfoType_Dictionary_WordList_{
					WordList: &dlppb.CustomInfoType_Dictionary_WordList{
						Words: []string{"Quasimodo"},
					},
				},
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct the exclusion rule that avoids the matches for the specified regex pattern.
	redactedRule := &dlppb.ExclusionRule{
		Type: &dlppb.ExclusionRule_Regex{
			Regex: &dlppb.CustomInfoType_Regex{
				Pattern: "REDACTED",
			},
		},
		MatchingType: dlppb.MatchingType_MATCHING_TYPE_PARTIAL_MATCH,
	}

	// Construct a ruleSet that applies the rules to the PERSON_NAME infoType.
	ruleSet := &dlppb.InspectionRuleSet{
		InfoTypes: []*dlppb.InfoType{
			{Name: "PERSON_NAME"},
		},
		Rules: []*dlppb.InspectionRule{
			{Type: &dlppb.InspectionRule_HotwordRule{HotwordRule: doctorRule.HotwordRule}},
			{Type: &dlppb.InspectionRule_HotwordRule{HotwordRule: patientRule.HotwordRule}},
			{Type: &dlppb.InspectionRule_ExclusionRule{ExclusionRule: quasimodoRule}},
			{Type: &dlppb.InspectionRule_ExclusionRule{ExclusionRule: redactedRule}},
		},
	}

	// Construct the configuration for the Inspect request, including the ruleSet.
	inspectConfig := &dlppb.InspectConfig{
		InfoTypes: []*dlppb.InfoType{
			{Name: "PERSON_NAME"},
		},
		IncludeQuote: true,
		RuleSet: []*dlppb.InspectionRuleSet{
			ruleSet,
		},
	}

	// Create and send the request.
	req := &dlppb.InspectContentRequest{
		Parent:        fmt.Sprintf("projects/%s/locations/global", projectID),
		Item:          ContentItem,
		InspectConfig: inspectConfig,
	}

	// Send the request.
	resp, err := client.InspectContent(ctx, req)
	if err != nil {
		return err
	}

	// Process the results.
	fmt.Fprintf(w, "Findings: %v\n", len(resp.Result.Findings))
	for _, v := range resp.GetResult().Findings {
		fmt.Fprintf(w, "Quote: %v\n", v.GetQuote())
		fmt.Fprintf(w, "Infotype Name: %v\n", v.GetInfoType().GetName())
		fmt.Fprintf(w, "Likelihood: %v\n", v.GetLikelihood())
	}
	return nil

}

Java

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.


import com.google.cloud.dlp.v2.DlpServiceClient;
import com.google.privacy.dlp.v2.ByteContentItem;
import com.google.privacy.dlp.v2.ByteContentItem.BytesType;
import com.google.privacy.dlp.v2.ContentItem;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.HotwordRule;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.LikelihoodAdjustment;
import com.google.privacy.dlp.v2.CustomInfoType.DetectionRule.Proximity;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary;
import com.google.privacy.dlp.v2.CustomInfoType.Dictionary.WordList;
import com.google.privacy.dlp.v2.CustomInfoType.Regex;
import com.google.privacy.dlp.v2.ExclusionRule;
import com.google.privacy.dlp.v2.Finding;
import com.google.privacy.dlp.v2.InfoType;
import com.google.privacy.dlp.v2.InspectConfig;
import com.google.privacy.dlp.v2.InspectContentRequest;
import com.google.privacy.dlp.v2.InspectContentResponse;
import com.google.privacy.dlp.v2.InspectionRule;
import com.google.privacy.dlp.v2.InspectionRuleSet;
import com.google.privacy.dlp.v2.Likelihood;
import com.google.privacy.dlp.v2.LocationName;
import com.google.privacy.dlp.v2.MatchingType;
import com.google.protobuf.ByteString;
import java.io.IOException;

public class InspectStringMultipleRules {

  public static void main(String[] args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String textToInspect = "patient: Jane Doe";
    inspectStringMultipleRules(projectId, textToInspect);
  }

  // Inspects the provided text, avoiding matches specified in the exclusion list.
  public static void inspectStringMultipleRules(String projectId, String textToInspect)
      throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (DlpServiceClient dlp = DlpServiceClient.create()) {
      // Specify the type and content to be inspected.
      ByteContentItem byteItem =
          ByteContentItem.newBuilder()
              .setType(BytesType.TEXT_UTF8)
              .setData(ByteString.copyFromUtf8(textToInspect))
              .build();
      ContentItem item = ContentItem.newBuilder().setByteItem(byteItem).build();

      // Construct hotword rules
      HotwordRule patientRule =
          HotwordRule.newBuilder()
              .setHotwordRegex(Regex.newBuilder().setPattern("patient"))
              .setProximity(Proximity.newBuilder().setWindowBefore(10))
              .setLikelihoodAdjustment(
                  LikelihoodAdjustment.newBuilder().setFixedLikelihood(Likelihood.VERY_LIKELY))
              .build();

      HotwordRule doctorRule =
          HotwordRule.newBuilder()
              .setHotwordRegex(Regex.newBuilder().setPattern("doctor"))
              .setProximity(Proximity.newBuilder().setWindowBefore(10))
              .setLikelihoodAdjustment(
                  LikelihoodAdjustment.newBuilder().setFixedLikelihood(Likelihood.UNLIKELY))
              .build();

      // Construct exclusion rules
      ExclusionRule quasimodoRule =
          ExclusionRule.newBuilder()
              .setDictionary(
                  Dictionary.newBuilder().setWordList(WordList.newBuilder().addWords("Quasimodo")))
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .build();

      ExclusionRule redactedRule =
          ExclusionRule.newBuilder()
              .setRegex(Regex.newBuilder().setPattern("REDACTED"))
              .setMatchingType(MatchingType.MATCHING_TYPE_PARTIAL_MATCH)
              .build();

      // Construct a ruleset that applies the rules to the PERSON_NAME infotype.
      InspectionRuleSet ruleSet =
          InspectionRuleSet.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .addRules(InspectionRule.newBuilder().setHotwordRule(patientRule))
              .addRules(InspectionRule.newBuilder().setHotwordRule(doctorRule))
              .addRules(InspectionRule.newBuilder().setExclusionRule(quasimodoRule))
              .addRules(InspectionRule.newBuilder().setExclusionRule(redactedRule))
              .build();

      // Construct the configuration for the Inspect request, including the ruleset.
      InspectConfig config =
          InspectConfig.newBuilder()
              .addInfoTypes(InfoType.newBuilder().setName("PERSON_NAME"))
              .setIncludeQuote(true)
              .addRuleSet(ruleSet)
              .build();

      // Construct the Inspect request to be sent by the client.
      InspectContentRequest request =
          InspectContentRequest.newBuilder()
              .setParent(LocationName.of(projectId, "global").toString())
              .setItem(item)
              .setInspectConfig(config)
              .build();

      // Use the client to send the API request.
      InspectContentResponse response = dlp.inspectContent(request);

      // Parse the response and process results
      System.out.println("Findings: " + response.getResult().getFindingsCount());
      for (Finding f : response.getResult().getFindingsList()) {
        System.out.println("\tQuote: " + f.getQuote());
        System.out.println("\tInfo type: " + f.getInfoType().getName());
        System.out.println("\tLikelihood: " + f.getLikelihood());
      }
    }
  }
}

Node.js

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

// Imports the Google Cloud Data Loss Prevention library
const DLP = require('@google-cloud/dlp');

// Instantiates a client
const dlp = new DLP.DlpServiceClient();

// The project ID to run the API call under
// const projectId = 'my-project';

// The string to inspect
// const string = 'patient: Jane Doe';

async function inspectStringMultipleRules() {
  // Construct item to inspect
  const item = {value: string};

  // Construct hotword rules
  const patientRule = {
    hotwordRegex: {pattern: 'patient'},
    proximity: {windowBefore: 10},
    likelihoodAdjustment: {
      fixedLikelihood:
        DLP.protos.google.privacy.dlp.v2.Likelihood.VERY_LIKELY,
    },
  };

  const doctorRule = {
    hotwordRegex: {pattern: 'doctor'},
    proximity: {windowBefore: 10},
    likelihoodAdjustment: {
      fixedLikelihood: DLP.protos.google.privacy.dlp.v2.Likelihood.UNLIKELY,
    },
  };

  // Construct exclusion rules
  const quasimodoRule = {
    dictionary: {wordList: {words: ['quasimodo']}},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  const redactedRule = {
    regex: {pattern: 'REDACTED'},
    matchingType:
      DLP.protos.google.privacy.dlp.v2.MatchingType
        .MATCHING_TYPE_PARTIAL_MATCH,
  };

  // The infoTypes of information to match
  const infoTypes = [{name: 'PERSON_NAME'}];

  // Construct a ruleset that applies the rules to the PERSON_NAME infotype.
  const ruleSet = [
    {
      infoTypes: infoTypes,
      rules: [
        {hotwordRule: patientRule},
        {hotwordRule: doctorRule},
        {exclusionRule: quasimodoRule},
        {exclusionRule: redactedRule},
      ],
    },
  ];

  // Construct the configuration for the Inspect request, including the ruleset.
  const inspectConfig = {
    infoTypes: infoTypes,
    ruleSet: ruleSet,
    includeQuote: true,
  };

  // Construct the Inspect request to be sent by the client.
  const request = {
    parent: `projects/${projectId}/locations/global`,
    inspectConfig: inspectConfig,
    item: item,
  };

  // Use the client to send the API request.
  const [response] = await dlp.inspectContent(request);

  // Print findings.
  const findings = response.result.findings;
  if (findings.length > 0) {
    console.log(`Findings: ${findings.length}\n`);
    findings.forEach(finding => {
      console.log(`InfoType: ${finding.infoType.name}`);
      console.log(`\tQuote: ${finding.quote}`);
      console.log(`\tLikelihood: ${finding.likelihood} \n`);
    });
  } else {
    console.log('No findings.');
  }
}
inspectStringMultipleRules();

PHP

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

use Google\Cloud\Dlp\V2\Client\DlpServiceClient;
use Google\Cloud\Dlp\V2\ContentItem;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\HotwordRule;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\LikelihoodAdjustment;
use Google\Cloud\Dlp\V2\CustomInfoType\DetectionRule\Proximity;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary;
use Google\Cloud\Dlp\V2\CustomInfoType\Dictionary\WordList;
use Google\Cloud\Dlp\V2\CustomInfoType\Regex;
use Google\Cloud\Dlp\V2\ExclusionRule;
use Google\Cloud\Dlp\V2\InfoType;
use Google\Cloud\Dlp\V2\InspectConfig;
use Google\Cloud\Dlp\V2\InspectContentRequest;
use Google\Cloud\Dlp\V2\InspectionRule;
use Google\Cloud\Dlp\V2\InspectionRuleSet;
use Google\Cloud\Dlp\V2\Likelihood;
use Google\Cloud\Dlp\V2\MatchingType;

/**
 * Inspect a string for sensitive data by using multiple rules
 * Illustrates applying both exclusion and hotword rules. This snippet's rule set includes both hotword rules and dictionary and regex exclusion rules. Notice that the four rules are specified in an array within the rules element.
 *
 * @param string $projectId         The Google Cloud project id to use as a parent resource.
 * @param string $textToInspect     The string to inspect.
 */
function inspect_string_multiple_rules(
    // TODO(developer): Replace sample parameters before running the code.
    string $projectId,
    string $textToInspect = 'patient: Jane Doe'
): void {
    // Instantiate a client.
    $dlp = new DlpServiceClient();

    $parent = "projects/$projectId/locations/global";

    // Specify what content you want the service to Inspect.
    $item = (new ContentItem())
        ->setValue($textToInspect);

    // Construct hotword rules
    $patientRule = (new HotwordRule())
        ->setHotwordRegex((new Regex())
            ->setPattern('patient'))
        ->setProximity((new Proximity())
            ->setWindowBefore(10))
        ->setLikelihoodAdjustment((new LikelihoodAdjustment())
            ->setFixedLikelihood(Likelihood::VERY_LIKELY));

    $doctorRule = (new HotwordRule())
        ->setHotwordRegex((new Regex())
            ->setPattern('doctor'))
        ->setProximity((new Proximity())
            ->setWindowBefore(10))
        ->setLikelihoodAdjustment((new LikelihoodAdjustment())
            ->setFixedLikelihood(Likelihood::VERY_UNLIKELY));

    // Construct exclusion rules
    $wordList = (new Dictionary())
        ->setWordList((new WordList())
            ->setWords(['Quasimodo']));

    $quasimodoRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setDictionary($wordList);

    $redactedRule = (new ExclusionRule())
        ->setMatchingType(MatchingType::MATCHING_TYPE_PARTIAL_MATCH)
        ->setRegex((new Regex())
            ->setPattern('REDACTED'));

    // Specify the exclusion rule and build-in info type the inspection will look for.
    $personName = (new InfoType())
        ->setName('PERSON_NAME');
    $inspectionRuleSet = (new InspectionRuleSet())
        ->setInfoTypes([$personName])
        ->setRules([
            (new InspectionRule())
                ->setHotwordRule($patientRule),
            (new InspectionRule())
                ->setHotwordRule($doctorRule),
            (new InspectionRule())
                ->setExclusionRule($quasimodoRule),
            (new InspectionRule())
                ->setExclusionRule($redactedRule),
        ]);

    // Construct the configuration for the Inspect request, including the ruleset.
    $inspectConfig = (new InspectConfig())
        ->setInfoTypes([$personName])
        ->setIncludeQuote(true)
        ->setRuleSet([$inspectionRuleSet]);

    // Run request
    $inspectContentRequest = (new InspectContentRequest())
        ->setParent($parent)
        ->setInspectConfig($inspectConfig)
        ->setItem($item);
    $response = $dlp->inspectContent($inspectContentRequest);

    // Print the results
    $findings = $response->getResult()->getFindings();
    if (count($findings) == 0) {
        printf('No findings.' . PHP_EOL);
    } else {
        printf('Findings:' . PHP_EOL);
        foreach ($findings as $finding) {
            printf('  Quote: %s' . PHP_EOL, $finding->getQuote());
            printf('  Info type: %s' . PHP_EOL, $finding->getInfoType()->getName());
            printf('  Likelihood: %s' . PHP_EOL, Likelihood::name($finding->getLikelihood()));
        }
    }
}

Python

Untuk mempelajari cara menginstal dan menggunakan library klien untuk Perlindungan Data Sensitif, lihat library klien Perlindungan Data Sensitif.

import google.cloud.dlp


def inspect_string_multiple_rules(project: str, content_string: str) -> None:
    """Uses the Data Loss Prevention API to modify likelihood for matches on
       PERSON_NAME combining multiple hotword and exclusion rules.

    Args:
        project: The Google Cloud project id to use as a parent resource.
        content_string: The string to inspect.

    Returns:
        None; the response from the API is printed to the terminal.
    """

    # Instantiate a client.
    dlp = google.cloud.dlp_v2.DlpServiceClient()

    # Construct hotword rules
    patient_rule = {
        "hotword_regex": {"pattern": "patient"},
        "proximity": {"window_before": 10},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.VERY_LIKELY
        },
    }
    doctor_rule = {
        "hotword_regex": {"pattern": "doctor"},
        "proximity": {"window_before": 10},
        "likelihood_adjustment": {
            "fixed_likelihood": google.cloud.dlp_v2.Likelihood.UNLIKELY
        },
    }

    # Construct exclusion rules
    quasimodo_rule = {
        "dictionary": {"word_list": {"words": ["quasimodo"]}},
        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
    }
    redacted_rule = {
        "regex": {"pattern": "REDACTED"},
        "matching_type": google.cloud.dlp_v2.MatchingType.MATCHING_TYPE_PARTIAL_MATCH,
    }

    # Construct the rule set, combining the above rules
    rule_set = [
        {
            "info_types": [{"name": "PERSON_NAME"}],
            "rules": [
                {"hotword_rule": patient_rule},
                {"hotword_rule": doctor_rule},
                {"exclusion_rule": quasimodo_rule},
                {"exclusion_rule": redacted_rule},
            ],
        }
    ]

    # Construct the configuration dictionary
    inspect_config = {
        "info_types": [{"name": "PERSON_NAME"}],
        "rule_set": rule_set,
        "include_quote": True,
    }

    # Construct the `item`.
    item = {"value": content_string}

    # Convert the project id into a full resource id.
    parent = f"projects/{project}"

    # Call the API.
    response = dlp.inspect_content(
        request={"parent": parent, "inspect_config": inspect_config, "item": item}
    )

    # Print out the results.
    if response.result.findings:
        for finding in response.result.findings:
            print(f"Quote: {finding.quote}")
            print(f"Info type: {finding.info_type.name}")
            print(f"Likelihood: {finding.likelihood}")
    else:
        print("No findings.")

REST

Lihat panduan memulai JSON untuk mengetahui informasi selengkapnya tentang penggunaan DLP API dengan JSON.

...
  "inspectConfig":{
    "infoTypes":[
      {
        "name":"PERSON_NAME"
      }
    ],
    "ruleSet":[
      {
        "infoTypes":[
          {
            "name":"PERSON_NAME"
          }
        ],
        "rules":[
          {
            "hotwordRule":{
              "hotwordRegex":{
                "pattern":"patient"
              },
              "proximity":{
                "windowBefore":10
              },
              "likelihoodAdjustment":{
                "fixedLikelihood":"VERY_LIKELY"
              }
            }
          },
          {
            "hotwordRule":{
              "hotwordRegex":{
                "pattern":"doctor"
              },
              "proximity":{
                "windowBefore":10
              },
              "likelihoodAdjustment":{
                "fixedLikelihood":"UNLIKELY"
              }
            }
          },
          {
            "exclusionRule":{
              "dictionary":{
                "wordList":{
                  "words":[
                    "Quasimodo"
                  ]
                }
              },
              "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
            }
          },
          {
            "exclusionRule":{
              "regex":{
                "pattern":"REDACTED"
              },
              "matchingType": "MATCHING_TYPE_PARTIAL_MATCH"
            }
          }
        ]
      }
    ]
  }
...

Pendeteksi infoType yang tumpang-tindih

Anda dapat menentukan pendeteksi infoType kustom yang memiliki nama yang sama dengan pendeteksi infoType bawaan. Seperti yang ditunjukkan dalam contoh di bagian "Skenario contoh aturan frasa pengaktif", saat Anda membuat detektor infoType kustom dengan nama yang sama seperti infoType bawaan, temuan apa pun yang terdeteksi oleh detektor infoType baru akan ditambahkan ke temuan yang terdeteksi oleh detektor bawaan. Hal ini hanya berlaku selama infoType bawaan ditentukan dalam daftar infoType di objek InspectConfig.

Saat membuat pendeteksi infoType kustom baru, uji secara menyeluruh pada contoh konten untuk memastikannya berfungsi seperti yang Anda inginkan.