This document describes recommended topologies and the corresponding availability Service Level Agreement (SLA) for each HA VPN topology. For Classic VPN topologies, see Classic VPN topologies. For more information about Cloud VPN, including both VPN types, see the Cloud VPN overview.
For definitions of terms used on this page, see Key terms.
Overview
HA VPN supports one of the following recommended topologies:
Connect Google Cloud to your peer VPN gateway. This topology requires two VPN tunnels from the HA VPN gateway to achieve the high availability SLA. In this configuration, HA VPN has three typical peer gateway configurations:
- Two separate peer VPN gateways, each with its own IP address.
- One peer VPN gateway with two separate IP addresses.
- One peer VPN gateway with one IP address.
Connect multiple Google Cloud VPC networks. In this topology, you connect two Google Cloud VPC networks by using an HA VPN gateway in each VPC network. The VPC networks can be in the same region or different Google Cloud regions.
You receive a different availability SLA for HA VPN gateways deployed in the same region versus those deployed across different regions. For more information, see High availability Configurations for HA VPN.
Connect a HA VPN gateway to Compute Engine VM instances. In this topology, you connect an HA VPN gateway to a Compute Engine virtual machine (VM) instance. Your VM instances can be in same zone or different zones.
The availability SLA of the Compute Engine VM instance determines the availability SLA for the VPN connection.
HA VPN over Cloud Interconnect. In this topology, you create HA VPN tunnels to carry IPsec-encrypted traffic over VLAN attachments of either Dedicated Interconnect or Partner Interconnect. You can reserve regional internal IP address ranges for your HA VPN gateways. Your peer VPN gateway can also have internal IP addresses. For more information and architecture diagrams, see HA VPN over Cloud Interconnect deployment architecture.
In Google Cloud, all peer gateway scenarios are represented by a single external peer VPN resource.
High availability configurations for HA VPN
The following table outlines the availability SLAs offered by different HA VPN configurations:
| Topology | Description | Availability SLA |
|---|---|---|
| Connect Google Cloud to your peer VPN gateway | Connect an HA VPN gateway to one or two separate peer VPN gateways | 99.99% |
| Connect VPC networks by using HA VPN gateways | Connect two Google Cloud VPC networks by using an HA VPN gateway in each network. The HA VPN gateways are deployed in the same region. The VPC networks can be in the same region or different regions. | 99.99% |
| HA VPN to Compute Engine VM instances in multiple zones | Connect an HA VPN gateway to Compute Engine VM instances with external IP addresses | 99.9% |
| HA VPN to a single Compute Engine VM instance | Connect an HA VPN gateway to only one Compute Engine VM instance with an external IP address | The availability SLA is determined by the availability SLA provided for a single VM instance of memory-optimized machine family for Compute Engine. For more information, see Compute Engine Service Level Agreement (SLA). |
To help ensure the maximum availability SLA for your HA VPN connections, we recommend that you configure two tunnels from your HA VPN gateway to your peer VPN gateway or to another HA VPN gateway. Make sure that the peer VPN gateway is also configured to receive the same availability SLA.
To maintain connectivity in case of failure of one of the tunnels, connect all interfaces of the HA VPN gateway to all interfaces of the peer gateway or another HA VPN gateway.
Connect Google Cloud to your peer VPN gateway
There are three typical peer gateway configurations for HA VPN:
- An HA VPN gateway to two separate peer VPN gateways, each with its own IP address
- An HA VPN gateway to one peer VPN gateway that uses two separate IP addresses
- An HA VPN gateway to one peer VPN gateway that uses one IP address
To set up any of these configurations, see Create an HA VPN to a peer VPN gateway.
If you deploy an HA VPN gateway with IPV6_ONLY or IPV4_IPV6 stack type, then your VPN tunnels can support the exchange of IPv6 traffic. IPv6 must also be enabled in the BGP sessions that you create for the VPN tunnels. In this scenario, you can assign IPv6 addresses to the on-premises subnets and VPC subnets in the following topologies. For more information, see IPv6 support.
Connect two peer VPN gateways
If your peer-side gateway is hardware-based, having a second peer-side gateway provides redundancy and failover on that side of the connection. A second physical gateway lets you take one of the gateways offline for software upgrades or other scheduled maintenance. It also protects you if there is a failure in one of the physical gateways.
In this topology, one HA VPN gateway connects to two peer VPN gateways. Each peer VPN gateway has one interface and one external IP address. The HA VPN gateway uses two tunnels, one tunnel to each peer VPN gateway.
In Google Cloud, the REDUNDANCY_TYPE for this configuration takes the
value TWO_IPS_REDUNDANCY.
The following example provides 99.99% availability SLA.
Connect one peer VPN gateway with two IP addresses
This topology describes one HA VPN gateway that connects to one peer VPN gateway that has two separate external IP addresses. The HA VPN gateway uses two tunnels, one tunnel to each external IP address on the peer VPN gateway.
In Google Cloud, the REDUNDANCY_TYPE for this configuration takes
the value TWO_IPS_REDUNDANCY.
The following example provides 99.99% availability SLA.
Connect one peer VPN gateway with one IP address
This topology describes one HA VPN gateway that connects to one peer VPN gateway that has one external IP address. The HA VPN gateway uses two tunnels, both tunnels to the single external IP address on the peer VPN gateway.
In Google Cloud, the REDUNDANCY_TYPE for this configuration takes the value
SINGLE_IP_INTERNALLY_REDUNDANT.
The following example provides 99.99% availability SLA.
Configure for 99.99% availability SLA
To meet the 99.99% availability SLA on the Google Cloud side, there must be a tunnel from each of the two interfaces on the HA VPN gateway to the corresponding interfaces on the peer gateway.
If the peer gateway has two interfaces, then configuring two tunnels, one from each peer interface to each HA VPN gateway interface, meets the requirements for the 99.99% availability SLA. A full mesh configuration is not required for 99.99% availability SLA on the Google Cloud side. In this case, a full mesh is defined as two tunnels from each HA VPN interface to each of the two interfaces on the peer gateway. To confirm if your VPN vendor recommends a full mesh configuration, see the documentation for your peer (on-premises) VPN gateway or contact your VPN vendor.
In configurations with two peer interfaces, tunnels on each of the following interfaces on the HA VPN gateway match the corresponding interfaces on the peer gateway or gateways:
- HA VPN
interface 0to peerinterface 0 - HA VPN
interface 1to peerinterface 1
Examples are shown in the diagrams for two peer VPN gateways, two interfaces and one peer VPN gateway, two interfaces.
If there is only one peer interface on one peer gateway, each tunnel from each HA VPN gateway interface must connect to the single peer interface. See the diagram for one peer VPN gateway, one interface.
The following example does not provide 99.99% availability SLA:
- HA VPN
interface 0to peerinterface 0
Connect VPC networks by using HA VPN gateways
You can connect two Google Cloud VPC networks by using an HA VPN gateway in each network. The VPC networks and the HA VPN gateways can be in the same or different regions.
You can connect more than two VPC networks by using transitive routing. To achieve transitive routing, create a hub VPC network and connect your other VPC networks to this hub by using individual HA VPN connections.
The availability SLA in this topology on whether the HA VPN gateways are in the same region or different regions. You get a higher availability SLA if the HA VPN gateways are in the same region.
Connect VPC networks
You can connect two VPC networks together by using an HA VPN gateway in each network. The HA VPN gateways must be deployed in the same region to get the best availability SLA even if the VPC networks are in different regions. Each HA VPN gateway identifies the other gateway by its name.
The following example provides 99.99% availability SLA.
To set up this configuration, see Create two fully configured HA VPN gateways that connect to each other.
Configure for 99.99% availability SLA
To help ensure 99.99% availability SLA, configure each HA VPN gateway with two tunnels so that both of the following are true:
Tunnel 0connectsinterface 0on one HA VPN gateway tointerface 0on the other HA VPN gateway.Tunnel 1connectsinterface 1on one HA VPN gateway tointerface 1on the other HA VPN gateway.
You can connect two VPC networks together by using an HA VPN gateway in each network, where the HA VPN gateways are in different regions. However, this topology provides a 99.9% availability SLA.
Unless you have a requirement for the HA VPN gateways to be in different regions, we don't recommend having the HA VPN gateways in different regions. VPC networks are global resources, which means you can use HA VPN to connect resources in different regions while the HA VPN gateways are deployed in the same region.
The following example provides 99.9% availability SLA.
To set up this configuration, see Create two fully configured HA VPN gateways that connect to each other.
Configure for 99.9% availability SLA
To help ensure 99.9% availability SLA if the VPN gateways are in different regions, configure each HA VPN gateway with two tunnels so that both of the following are true:
Tunnel 0connectsinterface 0on one HA VPN gateway tointerface 0on the other HA VPN gateway.Tunnel 1connectsinterface 1on one HA VPN gateway tointerface 1on the other HA VPN gateway.
To receive a better availability SLA, deploy the HA VPN gateways in the same region . This configuration also lets you connect VPC networks in different regions.
Connect a HA VPN gateway to Compute Engine VM instances
With HA VPN, you can establish a secure connection between an HA VPN gateway and Compute Engine VM instances that function as network virtual appliances with an IPsec implementation. This topology provides 99.9% availability SLA when configured correctly.
Connect HA VPN gateway to multiple VM instances
In this topology, an HA VPN gateway connects to two Compute Engine VM instances. The HA VPN gateway and the VMs are in two different Virtual Private Cloud networks. The two VMs are in different zones, with each VM having an external IP address. The VM instances behave like peer VPN gateways.
This topology is especially useful when you want to connect HA VPN to a third-party network virtual appliance VM hosted in a Compute Engine VM instance. For example, by using this topology, you can upgrade one of the network virtual appliance VMs without any downtime to the VPN connection.
In the diagram, the HA VPN gateway is in a VPC
network named network-a, and the two VMs are in network-b. Both VPC
networks are located in us-central1. The HA VPN
gateway in network-a is configured with the external IP addresses of each of
the VMs in network-b. You can also have the HA VPN gateway and
the VMs in two different regions. We recommend that you use this topology to
improve availability.
The following example provides 99.9% availability SLA.
To set up this configuration, see Connect HA VPN to Compute Engine VMs.
Configure for 99.9% availability SLA
To meet the 99.9% SLA, there must be at least two tunnels from each of the two interfaces on the HA VPN gateway to the corresponding interfaces on each of the VMs. We recommend that you use this topology to get higher availability SLA.
Two tunnels on each of the following interfaces on the HA VPN gateway connect to the interfaces on the VM:
Tunnel 0frominterface 0tous-central1-vm-ain theus-central1-azoneTunnel 1frominterface 1tous-central1-vm-ain theus-central1-azoneTunnel 2frominterface 0tous-central1-vm-bin theus-central1-bzoneTunnel 3frominterface 1tous-central1-vm-bin theus-central1-bzone
Connect HA VPN gateway HA VPN to a single VM instance
HA VPN lets you connect a HA VPN gateway to a Compute Engine virtual machine (VM) instance that works as a network virtual appliance and runs an IPsec VPN implementation. The HA VPN gateway and the VM are in two different VPCs. The VM has an external IP address.
Overall availability is determined by the availability SLA provided for a single VM instance of memory-optimized machine family for Compute Engine. For more information, see Compute Engine Service Level Agreement (SLA).
To set up this configuration, see Connect HA VPN to Compute Engine VMs.
Configure for 99.9% availability SLA
To meet the 99.9% availability SLA, there must be two tunnels from each of the two interfaces on the HA VPN gateway to the interface of the Compute Engine VM.
Two tunnels on each of the following interfaces on the HA VPN gateway connect to the interfaces on VM:
Tunnel 0frominterface 0tous-central1-vm-ain theus-central1-azoneTunnel 1frominterface 1tous-central1-vm-ain theus-central1-azone
What's next
- To use high-availability and high-throughput scenarios or multiple subnet scenarios, see Advanced configurations.
- To help you solve common issues that you might encounter when using Cloud VPN, see Troubleshooting.