Distributed Cloud Edge version 1.6.0

For version information, see the Distributed Cloud Edge release notes.

Available versions: 1.7.1 1.7.0 (current) 1.6.1 1.6.0 1.5.1

Deploy workloads

This page describes the steps to deploy workloads on your Google Distributed Cloud Edge hardware and the limitations that you must adhere to when configuring your workloads.

Before you complete these steps, you must meet the Distributed Cloud Edge installation requirements and order the Distributed Cloud Edge hardware.

When the Google Distributed Cloud Edge hardware arrives at your chosen destination, it is pre-configured with hardware, Google Cloud, and some network settings that you specified when you ordered Distributed Cloud Edge.

Google installers complete the physical installation, and your system administrator connects Distributed Cloud Edge to your local network.

After the hardware is connected to your local network, it communicates with Google Cloud to download software updates and connect with your Google Cloud project. You are then ready to provision node pools and deploy workloads on Distributed Cloud Edge.

Deployment overview

To deploy a workload on your Distributed Cloud Edge hardware, complete the following steps:

Optional: Enable the Distributed Cloud Edge Network API.
Optional: Initialize the network configuration of your Distributed Cloud Edge zone.
Optional: Configure Distributed Cloud Edge networking.
Create a Distributed Cloud Edge cluster.
Optional: Enable support for customer-managed encryption keys (CMEK) for local storage if you want to integrate with Cloud Key Management Service to enable support for CMEK for your workload data. For information about how Distributed Cloud Edge encrypts workload data, see Local storage security.
Create a node pool. In this step, you assign nodes to a node pool and optionally configure the node pool to use Cloud KMS to wrap and unwrap the Linux Unified Key Setup (LUKS) passphrase for encrypting workload data.
Obtain credentials for a cluster to test the cluster.
Grant users access to the cluster by assigning them the Edge Container Viewer role (roles/edgecontainer.viewer) or the Edge Container Admin role (roles/edgecontainer.admin) on the project.
Assign users granular role-based access to the cluster resources by using RoleBinding and ClusterRoleBinding.
Optional: Enable VM Runtime on Google Distributed Cloud support to run workloads on virtual machines on Distributed Cloud Edge.
Optional: Enable GPU support to run GPU-based workloads on Distributed Cloud Edge.
Optional: Connect the Distributed Cloud Edge cluster to Google Cloud:
1. Create a VPN connection to your Google Cloud project.
2. Check that the VPN connection is operational.
Optional: Configure Private Google Access to let your Pods access Google Cloud APIs and services by using Cloud VPN.
Optional: Configure Private Service Connect to let your Pods access Google Cloud APIs and services by using Cloud VPN.

Deploy the NGINX load balancer as a service

The following example illustrates how to deploy the NGINX server and expose it as a service on a Distributed Cloud Edge cluster:

Create a YAML file named nginx-deployment.yaml with the following contents:

apiVersion: apps/v1
kind: Deployment
metadata:
name: nginx
labels:
  app: nginx
spec:
replicas: 1
selector:
  matchLabels:
     app: nginx
template:
  metadata:
     labels:
     app: nginx
  spec:
     containers:
     - name: nginx
     image: nginx:latest
     ports:
     - containerPort: 80

Apply the YAML file to the cluster using the following command:
```
kubectl apply -f nginx-deployment.yaml
```

Create a YAML file named nginx-service.yaml with the following contents:

apiVersion: v1
kind: Service
metadata:
name: nginx-service
spec:
type: LoadBalancer
selector:
  app: nginx
  ports:
     - protocol: TCP
       port: 8080
       targetPort: 80

Apply the YAML file to the cluster using the following command:
```
kubectl apply -f nginx-deployment.yaml
```

Obtain the external IP address assigned to the service by the MetalLB load balancer using the following command:

kubectl get services

The command returns output similar to the following:

NAME            TYPE           CLUSTER-IP     EXTERNAL-IP     PORT(S)          AGE
nginx-service   LoadBalancer   10.51.195.25   10.100.68.104   8080:31966/TCP   11d

Deploy a container with SR-IOV functions

The following example illustrates how to deploy a Pod that uses the SR-IOV network function operator features of Distributed Cloud Edge.

Create the Distributed Cloud Edge networking components

Create the required Distributed Cloud Edge networking components as follows. For more information on these components, see Distributed Cloud Edge networking features.

Create a network:
```
gcloud edge-cloud networking networks create NETWORK_NAME \
    --location=REGION \
    --zone=ZONE_NAME \
    --mtu=MTU_SIZE
```
Replace the following:
- NETWORK_NAME: a descriptive name that uniquely identifies this network.
- REGION: the Google Cloud region to which the target Distributed Cloud Edge zone belongs.
- ZONE_NAME: the name of the target Distributed Cloud Edge zone.
- MTU_SIZE: the maximum transmission unit (MTU) size for this network. Valid values are 1500 and 9000. This value must match the MTU size of the default network and be the same for all networks.
Create a subnetwork:
```
gcloud edge-cloud networking subnets create SUBNETWORK_NAME \
    --network=NETWORK_NAME \
    --ipv4-range=IPV4_RANGE \
    --vlan-id=VLAN_ID \
    --location=REGION \
    --zone=ZONE_NAME
```
Replace the following:
- SUBNETWORK_NAME: a descriptive name that uniquely identifies this subnetwork.
- NETWORK_NAME: the network that encapsulates this subnetwork.
- IPV4_RANGE: the IPv4 address range that this subnetwork covers in the IP address/prefix format.
- VLAN_ID: the target VLAN ID for this subnetwork.
- REGION: the Google Cloud region to which the target Distributed Cloud Edge zone belongs.
- ZONE_NAME: the name of the target Distributed Cloud Edge zone.
Monitor the subnetwork's status until it has been successfully created:
```
watch -n 30 'gcloud edge-cloud networking subnets list \
    --location=REGION \
    --zone=ZONE_NAME
```
Replace the following:
- REGION: the Google Cloud region to which the target Distributed Cloud Edge zone belongs.
- ZONE_NAME: the name of the target Distributed Cloud Edge zone.
The status progresses from PENDING to PROVISIONING and finally to RUNNING.

Record the VLAN ID, subnetwork CIDR block, and the gateway IP address for the CIDR block. You will use these values later in this procedure.

Configure the `NodeSystemConfigUpdate` resources

Configure a NodeSystemConfigUpdate network function operator resource for each node in the cluster as follows.

List the nodes running in the target cluster's node pool using the following command:
```
kubectl get nodes | grep -v master
```
The command returns output similar to the following:
```
NAME                                 STATUS   ROLES       AGE     VERSION
pool-example-node-1-01-b2d82cc7      Ready    <none>      2d      v1.22.8-gke.200
pool-example-node-1-02-52ddvfc9      Ready    <none>      2d      v1.22.8-gke.200
```
Record the returned node names and derive their short names. For example, for the pool-example-node-1-01-b2d82cc7 node, its short name is node101.

For each node you've recorded in the previous step, create a dedicated NodeSystemConfigUpdate resource file with the following contents:

apiVersion: networking.gke.io/v1
kind: NodeSystemConfigUpdate
metadata:
name: nodesystemconfigupdate-NODE_SHORT_NAME
namespace: nf-operator
spec:
kubeletConfig:
  cpuManagerPolicy: Static
  topologyManagerPolicy: SingleNumaNode
nodeName: NODE_NAME
osConfig:
  hugePagesConfig:
     ONE_GB: 2
     TWO_MB: 0
  isolatedCpusPerSocket:
     "0": 40
     "1": 40
sysctls:
  nodeLevel:
     net.core.rmem_max: "8388608"
     net.core.wmem_max: "8388608"

Replace the following:

NODE_NAME: the full name of the target node. For example, pool-example-node-1-01-b2d82cc7.
NODE_SHORT_NAME: the short name of the target node derived from its full name. For example, node101.

Name each file node-system-config-update-NODE_SHORT_NAME.yaml.

Apply each of the NodeSystemConfigUpdate resource files to the cluster using the following command:
```
kubectl apply -f node-system-config-update-NODE_SHORT_NAME.yaml
```
Replace NODE_SHORT_NAME with the short name of the corresponding target node.

When you apply the resources to the cluster, each affected node reboots, which can take up to 30 minutes.
1. Monitor the status of the affected nodes until all have successfully rebooted:
```
kubectl get nodes | grep -v master
```
The status of each node transitions from not-ready to ready as their reboots complete.

Configure the ToR switches for SR-IOV network functions

Follow the steps in this section to configure the network interfaces in each Distributed Cloud Edge ToR switch in the Distributed Cloud Edge rack for SR-IOV network functions operation.

Create a file named mlnc6-pcie1-tor1-sriov.yaml with the following contents. This file configures the first network interface on the first ToR switch.

  apiVersion: sriovnetwork.k8s.cni.cncf.io/v1
  kind: SriovNetworkNodePolicy
  metadata:
  name: mlnx6-pcie1-tor1-sriov
  namespace: sriov-network-operator
  spec:
  deviceType: netdevice
  isRdma: false
  linkType: eth
  mtu: 9000
  nicSelector:
     pfNames:
     - enp59s0f0np0
  nodeSelector:
     edgecontainer.googleapis.com/network-sriov.capable: "true"
  numVfs: 31
  priority: 99
  resourceName: mlnx6_pcie1_tor1_sriov

Create a file named mlnc6-pcie1-tor2-sriov.yaml with the following contents. This file configures the second network interface on the first ToR switch.

  apiVersion: sriovnetwork.k8s.cni.cncf.io/v1
  kind: SriovNetworkNodePolicy
  metadata:
  name: mlnx6-pcie1-tor2-sriov
  namespace: sriov-network-operator
  spec:
  deviceType: netdevice
  isRdma: false
  linkType: eth
  mtu: 9000
  nicSelector:
     pfNames:
     - enp59s0f1np1
  nodeSelector:
     edgecontainer.googleapis.com/network-sriov.capable: "true"
  numVfs: 31
  priority: 99
  resourceName: mlnx6_pcie1_tor2_sriov

Create a file named mlnc6-pcie2-tor1-sriov.yaml with the following contents. This file configures the first network interface on the second ToR switch.

  apiVersion: sriovnetwork.k8s.cni.cncf.io/v1
  kind: SriovNetworkNodePolicy
  metadata:
  name: mlnx6-pcie2-tor1-sriov
  namespace: sriov-network-operator
  spec:
  deviceType: netdevice
  isRdma: false
  linkType: eth
  mtu: 9000
  nicSelector:
     pfNames:
     - enp216s0f0np0
  nodeSelector:
     edgecontainer.googleapis.com/network-sriov.capable: "true"
  numVfs: 31
  priority: 99
  resourceName: mlnx6_pcie2_tor1_sriov

Create a file named mlnc6-pcie2-tor2-sriov.yaml with the following contents. This file configures the second network interface on the second ToR switch.

  apiVersion: sriovnetwork.k8s.cni.cncf.io/v1
  kind: SriovNetworkNodePolicy
  metadata:
  name: mlnx6-pcie2-tor2-sriov
  namespace: sriov-network-operator
  spec:
  deviceType: netdevice
  isRdma: false
  linkType: eth
  mtu: 9000
  nicSelector:
     pfNames:
     - enp216s0f1np1
  nodeSelector:
     edgecontainer.googleapis.com/network-sriov.capable: "true"
  numVfs: 31
  priority: 99
  resourceName: mlnx6_pcie2_tor2_sriov

Apply the ToR configuration files to the cluster using the following commands:

kubectl apply -f mlnc6-pcie1-tor1-sriov.yaml
kubectl apply -f mlnc6-pcie1-tor2-sriov.yaml
kubectl apply -f mlnc6-pcie2-tor1-sriov.yaml
kubectl apply -f mlnc6-pcie2-tor2-sriov.yaml

The affected nodes are cordoned off, drained, and rebooted.

Monitor the status of the nodes using the following command:

watch -n 5 'kubectl get sriovnetworknodestates -o yaml -A | \ 
grep "syncStatus\|pool-"|sed "N;s/\n/ /"'

When all affected nodes show syncStatus: Succeeded, press Ctrl+C to exit the monitoring command loop.

The command returns output similar to the following, indicating that the SR-IOV network function features have been enabled on the ToR switches:

Allocated resources:
(Total limits may be over 100 percent, i.e., overcommitted.)
Resource                       Requests     Limits
--------                       --------     ------
cpu                            2520m (3%)   7310m (9%)
memory                         3044Mi (1%)  9774Mi (3%)
ephemeral-storage              0 (0%)       0 (0%)
hugepages-1Gi                  0 (0%)       0 (0%)
hugepages-2Mi                  0 (0%)       0 (0%)
devices.kubevirt.io/kvm        0            0
devices.kubevirt.io/tun        0            0
devices.kubevirt.io/vhost-net  0            0
gke.io/mlnx6_pcie1_tor1_sriov  3            3
gke.io/mlnx6_pcie1_tor2_sriov  0            0
gke.io/mlnx6_pcie2_tor1_sriov  0            0
gke.io/mlnx6_pcie2_tor2_sriov  0            0

Configure a `NetworkAttachmentDefinition` resource

Configure a NetworkAttachmentDefinition resource for the cluster as follows:

Create a file named network-attachment-definition.yaml with the following contents:

apiVersion: "k8s.cni.cncf.io/v1"
kind: NetworkAttachmentDefinition
metadata:
name: sriov-net1
annotations:
  k8s.v1.cni.cncf.io/resourceName: gke.io/mlnx6_pcie1_tor1_sriov
spec:
config: '{
"type": "sriov",
"cniVersion": "0.3.1",
"vlan": VLAN_ID,
"name": "sriov-network",
"ipam": {
  "type": "host-local",
  "subnet": "SUBNETWORK_CIDR",
  "routes": [{
     "dst": "0.0.0.0/0"
  }],
  "gateway": "GATEWAY_ADDRESS"
}
}'

Replace the following:

VLAN_ID: the VLAN ID of the subnetwork you created earlier in this guide.
SUBNETWORK_CIDR: the CIDR block for the subnetwork.
GATEWAY_ADDRESS: the gateway IP address for the subnetwork.

Apply the resource to the cluster using the following command:
```
kubectl apply -f network-attachment-definition.yaml
```

Deploy a Pod with SR-IOV network functions

Complete the steps in this section to deploy a Pod with SR-IOV network functions on the cluster. The annotations field in the Pod's configuration file specifies the name of the NetworkAttachmentDefinition resource you created earlier in this guide and the namespace in which it has been deployed (default in this example).

Create a Pod specification file named sriovpod.yaml with the following contents:

     apiVersion: v1
     kind: Pod
     metadata:
     name: sriovpod
     annotations:
        k8s.v1.cni.cncf.io/networks: default/sriov-net1
     spec:
     containers:
     - name: sleeppodsriov
        command: ["sh", "-c", "trap : TERM INT; sleep infinity & wait"]
        image: busybox
        securityContext:
           capabilities:
           add:
              - NET_ADMIN

Apply the Pod specification file to the cluster using the following command:
```
kubectl apply -f sriovpod.yaml
```
Verify that the Pod has successfully started using the following command:
```
kubectl get pods
```
Establish a command-line shell for the Pod using the following command:
```
kubectl exec -it sriovpod -- sh
```

Confirm that the Pod is communicating with the ToR switches using the SR-IOV network function operator feature using the following command in the Pod shell:

ip addr

The command returns output similar to the following:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
   inet 127.0.0.1/8 scope host lo
      valid_lft forever preferred_lft forever
   inet6 ::1/128 scope host 
      valid_lft forever preferred_lft forever
51: net1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 9000 qdisc mq qlen 1000
   link/ether 2a:af:96:a5:42:ab brd ff:ff:ff:ff:ff:ff
   inet 192.168.100.11/25 brd 192.168.100.127 scope global net1
      valid_lft forever preferred_lft forever
228: eth0@if229: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue qlen 1000
   link/ether 46:c9:1d:4c:bf:32 brd ff:ff:ff:ff:ff:ff
   inet 10.10.3.159/32 scope global eth0
      valid_lft forever preferred_lft forever
   inet6 fe80::44c9:1dff:fe4c:bf32/64 scope link 
      valid_lft forever preferred_lft forever

The information returned for the net1 interface denotes that network connectivity between the ToR switches and the Pod has been established.

Limitations for Distributed Cloud Edge workloads

When you configure your Distributed Cloud Edge workloads, you must adhere to the limitations described in this section. These limitations are enforced by Distributed Cloud Edge on all the workloads that you deploy on your Distributed Cloud Edge hardware.

Linux workload limitations

Distributed Cloud Edge supports only the following Linux capabilities for workloads:

AUDIT_READ
AUDIT_WRITE
CHOWN
DAC_OVERRIDE
FOWNER
FSETID
IPC_LOCK
IPC_OWNER
KILL
MKNOD
NET_ADMIN
NET_BIND_SERVICE
NET_RAW
SETFCAP
SETGID
SETPCAP
SETUID
SYS_CHROOT
SYS_NICE
SYS_PACCT
SYS_RESOURCE
SYS_TIME

Namespace restrictions

Distributed Cloud Edge does not support the following namespaces:

hostPID
hostIPC
hostNetwork

Resource type restrictions

Distributed Cloud Edge does not support the CertificateSigningRequest resource type, which allows a client to ask for an X.509 certificate to be issued, based on a signing request.

Security context restrictions

Distributed Cloud Edge does not support the privileged mode security context.

Pod binding restrictions

Distributed Cloud Edge does not support binding Pods to host ports in the HostNetwork namespace. Additionally, the HostNetwork namespace is not available.

`hostPath` volume restrictions

Distributed Cloud Edge only allows the following hostPath volumes with read/write access:

/dev/hugepages
/dev/infiniband
/dev/vfio
/dev/char
/sys/devices

`PersistentVolumeClaim` resource type restrictions

Distributed Cloud Edge only allows the following PersistentVolumeClaim resource types:

csi
nfs
local

Volume type restrictions

Distributed Cloud Edge only allows the following volume types:

configMap
csi
downwardAPI
emptyDir
hostPath
nfs
persistentVolumeClaim
projected
secret

Pod toleration restrictions

Distributed Cloud Edge does not allow user-created Pods on control plane nodes. Specifically, Distributed Cloud Edge does not allow scheduling Pods that have the following toleration keys:

""
node-role.kubernetes.io/master
node-role.kubernetes.io/control-plane

Impersonation restrictions

Distributed Cloud Edge does not support user or group impersonation.

Management namespace restrictions

Distributed Cloud Edge does not allow access to the following namespaces:

ai-system
ai-speech-system
ai-ocr-system
ai-translation-system
anthos-identity-service
cert-manager
dataproc-system
dataproc-PROJECT_ID
dns-system
g-istio-system
gke-connect
gke-managed-metrics-server
gke-operators
g-ospf-servicecontrol-system
g-ospf-system
gke-system
gpc-backup-system
iam-system
kube-node-lease
kube-public
kube-system with the exception of deleting ippools.whereabouts.cni.cncf.io
metallb-system with the exception of editing configMap resources to set load-balancing IP address ranges
nf-operator
oclcm-system
prediction
rm-system
robinio
saas-system
sriov-fec-system
sriov-network-operator
vm-system

PROJECT_ID denotes the ID of the target Google Cloud project.

Avoid the use of any namespace with the g- prefix in its name. Such namespaces are typically a reserved namespace used by Distributed Cloud Edge.

Webhook restrictions

Distributed Cloud Edge restricts webhooks as follows:

Any mutating webhook that you create automatically excludes the kube-system namespace.
Mutating webhooks are disabled for the following resource types:
- nodes
- persistentvolumes
- certificatesigningrequests
- tokenreviews

What's next

Apply security best practices