Connect an environment to a VPC network

Cloud Composer 1 | Cloud Composer 2 | Cloud Composer 3

This page explains how your environment can access a VPC network in Cloud Composer 3, provides instructions for connecting an environment to a VPC network, and describes how to disable a previously configured connection.

About VPC network access

In Cloud Composer 3, you can enable access to a VPC network for an environment.

If you enable access to a VPC network for an environment:

  • Airflow components of your environment can access private network endpoints in your VPC network. For example, your DAG code can access resources located in your VPC network through a configured Airflow connection.

  • If your environment uses Private IP networking, all internal traffic except traffic to Google Services API is routed to your VPC network.

  • Depending on how you configure your VPC network, a Private IP environment can gain access to the internet through you VPC network.

  • Regardless of the VPC network access status, access to Google Services APIs is always possible.

  • Private DNS Zones defined in your VPC network are automatically available to your environment's Airflow components.

  • The environment reserves two IP addresses in your VPC subnetwork.

Cloud Composer uses a network attachment to connect your environment to a VPC network:

  • If you specify a VPC network and subnetwork, then Cloud Composer creates a new network attachment in your project. This attachment is deleted after you delete an environment, disable connection to a VPC network, or overwrite the VPC connection parameters.

  • If you specify an existing network attachment, then it must be located in the same project with the environment. This attachment is not deleted after you delete an environment, disable connection, or overwrite the VPC connection parameters.

  • In Shared VPC networking:

    • Make sure that you configured Shared VPC networking for Cloud Composer. See Configure Shared VPC for information about configuring projects and permissions for Cloud Composer.

    • After Shared VPC networking is configured, you can connect your environment to a VPC network from the host project. If you use an existing network attachment, it must be created in the service project (where the environment is located), and attached to a Shared VPC network.

About the environment's internal IP range

Cloud Composer 3 environments require several IP addresses for its components that run in the tenant project, such as your environment's cluster and Cloud SQL proxy. These IP addresses are taken from the environment's internal IP range.

  • The default internal IP range is 100.64.128.0/20.

  • You can specify a different internal IP range when you create an environment. This range must use a /20 mask.

  • You cannot change the internal IP range of an existing environment.

The internal IP range interacts with your VPC network in the following ways:

  • The internal IP range must not conflict with the VPC subnetwork that the Cloud Composer environment is connected to. It's not possible to enable a connection with a VPC subnetwork that overlaps with the internal IP range.

  • If the internal IP range of an environment overlaps with your VPC network ranges, then endpoints from your VPC network that have overlapping IP addresses are not accessible from the environment.

    For example, if the internal range is 100.64.128.0/20 then any request to the 100.64.128.1 endpoint in your VPC network fails because the request does not leave the tenant project.

  • The internal IP range is not reserved. You can use the same internal IP range for several environments without any additional setup because the internal VPC networks used by different environments are separated.

  • You can use the internal range IP addresses for other purposes, as long as DAGs and tasks in your environment do not make requests to them.

Connect to a VPC network

Console

  1. In the Google Cloud console, go to the Environments page.

    Go to Environments

  2. In the list of environments, click the name of your environment. The Environment details page opens.

  3. Go to the Environment configuration tab.

  4. In the Network configuration section, find the Network attachment item and click Edit.

  5. In the Network attachment dialog:

    • To create a new network attachment, in the Network attachment list, select Create a new network attachment. In the Network and Subnetwork lists, select a VPC network and a subnetwork.

    • To use an existing network attachment, in the Network attachment list, select an attachment.

  6. Click Save.

gcloud

The following Google Cloud CLI arguments specify VPC network connection parameters:

  • --network: VPC network ID.
  • --subnetwork: VPC subnetwork ID.
  • --network-attachment: Use an existing network attachment instead.

New network attachment

To connect your environment to a VPC network through a new network attachment, run the following Google Cloud CLI command:

gcloud beta composer environments update ENVIRONMENT_NAME \
  --location LOCATION \
  --network NETWORK_ID \
  --subnetwork SUBNETWORK_ID

Replace the following:

  • ENVIRONMENT_NAME: the name of the environment
  • LOCATION: the region where the environment is located
  • NETWORK_ID: VPC network ID
  • SUBNETWORK_ID: VPC subnetwork ID

Example:

gcloud beta composer environments update example-environment \
  --location us-central1 \
  --network projects/example-project/global/networks/example-network \
  --subnetwork projects/example-project/regions/us-central1/subnetworks/example-subnetwork

Existing network attachment

To connect your environment to a VPC network through a new network attachment, run the following Google Cloud CLI command:

gcloud beta composer environments update ENVIRONMENT_NAME \
  --location LOCATION \
  --network-attachment NETWORK_ATTACHMENT_ID

Replace the following:

  • ENVIRONMENT_NAME: the name of the environment
  • LOCATION: the region where the environment is located
  • NETWORK_ATTACHMENT_ID: the network attachment in the projects/{project}/regions/{region}/networkAttachments/{networkAttachment} format.

Example:

gcloud beta composer environments update example-environment \
  --location us-central1 \
  --network-attachment projects/example-project/regions/us-central1/networkAttachments/example-network-attachment

API

  1. Create an environments.patch API request.

  2. In this request:

    • To create a new network attachment:

      1. In the updateMask parameter, specify the config.node_config.network,config.node_config.subnetwork mask.

      2. In the request body, in the network and subnetwork fields, specify your VPC network and subnetwork IDs.

    • To use an existing network attachment:

      1. In the updateMask parameter, specify the config.node_config.composer_network_attachment mask.

      2. In the request body, provide a value for the existing network attachment in the projects/{project}/regions/{region}/networkAttachments/{networkAttachment} format.

Example (new network attachment):

// PATCH https://composer.googleapis.com/v1beta1/projects/example-project/
// locations/us-central1/environments/example-environment?updateMask=
// config.node_config.network,config.node_config.subnetwork

"config": {
  "nodeConfig": {
    "network": "projects/example-project/global/networks/example-network",
    "subnetwork": "projects/example-project/regions/us-central1/subnetworks/example-subnetwork"
  }
}

Example (existing network attachment):

// PATCH https://composer.googleapis.com/v1beta1/projects/example-project/
// locations/us-central1/environments/example-environment?updateMask=
// config.node_config.composer_network_attachment

"config": {
  "nodeConfig": {
    "composerNetworkAttachment": "projects/example-project/regions/us-central1/networkAttachments/example-network-attachment"
  }
}

Terraform

The following fields in the node_config block specify VPC network connection parameters:

  • network: VPC network ID.
  • subnetwork: VPC subnetwork ID.
  • composer_network_attachment: Use an existing network attachment instead.

New network attachment

resource "google_composer_environment" "example" {
  provider = google-beta
  name = "ENVIRONMENT_NAME"
  region = "LOCATION"

  config {

    node_config {
      network = NETWORK_ID
      subnetwork = SUBNETWORK_ID
    }

  }
}

Replace the following:

  • ENVIRONMENT_NAME: the name of your environment.
  • LOCATION: the region where the environment is located.
  • NETWORK_ID: VPC network ID
  • SUBNETWORK_ID: VPC subnetwork ID

Example (new network attachment):

resource "google_composer_environment" "example" {
  provider = google-beta
  name = "example-environment"
  region = "us-central1"

  config {

    node_config {
      network = "projects/example-project/global/networks/example-network"
      subnetwork = "projects/example-project/regions/us-central1/subnetworks/example-subnetwork"
    }

    ... other configuration parameters
  }
}

Existing network attachment

resource "google_composer_environment" "example" {
  provider = google-beta
  name = "ENVIRONMENT_NAME"
  region = "LOCATION"

  config {

    node_config {
      composer_network_attachment = NETWORK_ATTACHMENT_ID
    }

  }
}

Replace the following:

  • ENVIRONMENT_NAME: the name of your environment.
  • LOCATION: the region where the environment is located.
  • NETWORK_ATTACHMENT_ID: the network attachment ID.

Example (existing network attachment):

resource "google_composer_environment" "example" {
  provider = google-beta
  name = "example-environment"
  region = "us-central1"

  config {

    node_config {
      composer_network_attachment = projects/example-project/regions/us-central1/networkAttachments/example-network-attachment
    }

    ... other configuration parameters
  }
}

Disable connection to a VPC network

Console

  1. In the Google Cloud console, go to the Environments page.

    Go to Environments

  2. In the list of environments, click the name of your environment. The Environment details page opens.

  3. Go to the Environment configuration tab.

  4. In the Network configuration section, find the Network attachment item and click Edit.

  5. In the Network attachment dialog, select None and click Save.

gcloud

The --disable-vpc-connectivity arguments disables the VPC network connection of your environment:

gcloud beta composer environments update ENVIRONMENT_NAME \
  --location LOCATION \
  --disable-vpc-connectivity

Replace the following:

  • ENVIRONMENT_NAME: the name of the environment
  • LOCATION: the region where the environment is located

Example:

gcloud beta composer environments update example-environment \
  --location us-central1 \
  --disable-vpc-connectivity

API

  1. Create an environments.patch API request.

  2. In this request:

    1. In the updateMask parameter, specify the config.node_config.network,config.node_config.subnetwork mask.

    2. In the request body, in the network and subnetwork fields, specify empty values.

Example:

// PATCH https://composer.googleapis.com/v1beta1/projects/example-project/
// locations/us-central1/environments/example-environment?updateMask=
// config.node_config.network,config.node_config.subnetwork

"config": {
  "nodeConfig": {
    "network": "",
    "subnetwork": ""
  }
}

Terraform

It's not possible to detach a VPC network using Terraform. Instead, you can attach a different VPC network in its place, or detach the network using other tools like Google Cloud CLI.

What's next