User guide for Windows Server OS node pools

With Google Distributed Cloud, you can create a node pool of Windows Server OS nodes. The user cluster that runs the Windows Server OS node pools can also run node pools that contain nodes using Ubuntu or Container-Optimized OS.

Requirements for a Windows Server OS node pool

The nodes in a node pool must all use the same operating system, indicated by the osImageType parameter.

Before you create, in your user cluster, a node pool that has Windows Server OS nodes, make sure you meet these requirements:

  • An admin cluster must already be in place before you can create a Windows node pool, because a Windows node pool is only supported in the user cluster.
  • The user cluster must run at least one Linux node pool, because the Linux node pool is required to create a Windows node pool.
  • A user cluster with Windows node pools must have the enabledataplanev2 field set to true in the user cluster configuration file. This enables Dataplane V2 on the Linux nodes in that cluster.
  • By default, Windows Dataplane V2 is enabled for the Windows node pools for new user clusters.

  • You have downloaded a Windows Server 2019 ISO from Microsoft to create a VM template specific for Windows node pools. The language/region tag for the ISO must be en-US.

  • Your vSphere environment must be vSphere 6.7, Update 3 or later.

Create a Windows node pool in a user cluster

Step 1: Create the Windows VM Template for Google Distributed Cloud

Before you begin, make sure that you have already created an admin cluster.

  1. Create a base Windows VM template from the Windows Server 2019 ISO.

    • The initial network adapter type for the Windows VM to install Windows Server 2019 ISO should be E1000E.
    • Follow these steps: Create a VMware vSphere template for Windows Server 2019.
    • Take note of the initial password that is set when you run the Windows ISO installer, to use it in the future.
    • Make sure you are using the latest qualified patch version for Windows Server 2019, check our release notes to find out the latest qualified Windows OS image version for a given Anthos release version. See Security patch process.
    • You can't attach any device that uses the IDE controller to the base VM template.
  2. Install VMware Tools on the base Windows VM template if not already installed, using the VMWare instructions.

  3. Create a Windows VM template:

    gkectl prepare windows \
        --kubeconfig ADMIN_CLUSTER_KUBECONFIG \
        --base-vm-template BASE_WINDOWS_VM_TEMPLATE \
        --bundle-path BUNDLE \
        [--skip-sysprep]
    

    Replace the following:

    • ADMIN_CLUSTER_KUBECONFIG: The path to the admin cluster kubeconfig file.

    • BASE_WINDOWS_VM_TEMPLATE: The path to the base Windows VM template

    • BUNDLE: The path to the Google Distributed Cloud bundle file

    As part of building the base Windows VM template, gkectl prepare windows runs Windows sysprep. This generalizes the VM template and cleans up network settings for the VM, and thus helps to avoid IP address conflicts when VMs are cloned from the same template. However, Windows sysprep runs as a closed box, so it is hard to handle certain sysprep failures.

    If you want to build a base Windows VM template without running Windows sysprep, include the --skip-sysprep in the gkectl prepare windows command.

  4. In the last line of the command output, you can find the name of the generated Windows VM template. Make a note of the name for future use. The name has the following format:

    Successfully created Anthos Windows VM template "gke-on-prem-windows-server-2019-VERSION"
    

Step 2: Upload Windows container images to a private registry

Omit this step if you are not using a private registry.

You can automate the upload of Windows container images to a private registry using containerd on a Linux admin workstation. But containerd cannot push the Windows container image base layer, which means the base layers must be pulled from the Microsoft registry when pulling the image. To push the base layers, follow the Option 2 steps.

Option 1: If you don't need to manually push the Windows base layer images to the private registry:

gkectl prepare --config <var class="edit">ADMIN_CLUSTER_CONFIG</var> --upload-windows-images

Replace ADMIN_CLUSTER_CONFIG with the path to the admin cluster configuration file.

The flag --upload-windows-images specifies that Windows Container images will be pushed. Only Linux container images will be pushed to the private registry without specifying this flag.

Option 2: If you need to manually push the Windows base layer images to the private registry:

  • Use a Windows machine with Docker installed, and with access to gcr.io, before attempting these steps. You can only pull Windows container images to a Windows machine.
  • Run docker login to authenticate to your private registry.
  • Upload the Windows Container images together with their base layers to your private registry, following these steps:

    • Go to the Docker daemon.json file on your Windows machine:

      PS C:> cat C:\ProgramData\docker\config\daemon.json
      

    • Add the following lines to configure your Docker daemon.json file to allow pushing foreign layers to your private registry:

    {
      "allow-nondistributable-artifacts": ["PRIVATE_REGISTRY_NAME"]
    }
    
    • Download the required Windows Container images to your local Windows machine, and then tag and push them to your private registry. The changes you made to the daemon.json Docker configuration file mean that the base layer can be pushed to the private registry. To complete these tasks, run the following commands:
# Pull the Windows container images
docker pull gcr.io/gke-on-prem-release/pause-win:gke_windows_pause_20210302_RC00_2019
docker pull gcr.io/gke-on-prem-release/fluent-bit-win:v1.8.3-gke.1_ltsc2019
docker pull gcr.io/gke-on-prem-release/gke-metrics-agent-windows:0.3.10-gke.0_2019

# Tag the images to use private registry
docker tag gcr.io/gke-on-prem-release/pause-win:gke_windows_pause_20210302_RC00_2019 $PRIVATE_REGISTRY_URL/pause-win:gke_windows_pause_20210302_RC00_2019
docker tag gcr.io/gke-on-prem-release/fluent-bit-win:v1.8.3-gke.1_ltsc2019 $PRIVATE_REGISTRY_URL/fluent-bit-win:v1.8.3-gke.1_ltsc2019
docker tag gcr.io/gke-on-prem-release/gke-metrics-agent-windows:0.3.10-gke.0_2019 $PRIVATE_REGISTRY_URL/gke-metrics-agent-windows:0.3.10-gke.0_2019

# Push to private registry
docker push PRIVATE_REGISTRY_URL/pause-win:gke_windows_pause_20210302_RC00_2019
docker push PRIVATE_REGISTRY_URL/fluent-bit-win:v1.8.3-gke.1_ltsc2019
docker push PRIVATE_REGISTRY_URL/gke-metrics-agent-windows:0.3.10-gke.0_2019

Step 3: (Required if using proxy) Allowlisting URLs for creating Windows node pools

If your cluster is behind a proxy server, add these URLs to your proxy server allowlist in addition to the other addresses that Google Distributed Cloud requires.

# Microsoft registry URLs, needed by every Windows node if using GCR
mcr.microsoft.com
.data.mcr.microsoft.com
go.microsoft.com
winlayers.cdn.mscr.io

# Microsoft WSUS server URLs, needed by `gkectl prepare windows` on the Windows VM
windowsupdate.microsoft.com
.windowsupdate.microsoft.com
.windowsupdate.microsoft.com
.update.microsoft.com
.windowsupdate.com
download.windowsupdate.com
download.microsoft.com
.download.windowsupdate.com
wustat.windows.com
ntservicepack.microsoft.com
go.microsoft.com
dl.delivery.mp.microsoft.com

# Cloudbase-Init URL, needed by `gkectl prepare windows` on the Windows VM
https://cloudbase.it

# Powershell Gallery URLs, needed by `gkectl prepare windows` on the Windows VM
psg-prod-eastus.azureedge.net
az818661.vo.msecnd.net
devopsgallerystorage.blob.core.windows.net
.powershellgallery.com

# Windows Update Service, needed by `gkectl prepare windows` on the Windows VM
onegetcdn.azureedge.net
sws.update.microsoft.com
tsfe.trafficshaping.dsp.mp.microsoft.com
fe3.delivery.mp.microsoft.com
.prod.do.dsp.mp.microsoft.com
emdl.ws.microsoft.com
adl.windows.com
activation-v2.sls.microsoft.com
crl.microsoft.com
ocsp.digicert.com
ctldl.windowsupdate.com
login.live.com
licensing.mp.microsoft.com
www.msftconnecttest.com
settings-win.data.microsoft.com
wdcp.microsoft.com
smartscreen-prod.microsoft.com
checkappexec.microsoft.com
arc.msn.com
ris.api.iris.microsoft.com
.tlu.dl.delivery.mp.microsoft.com
.au.windowsupdate.com
www.microsoft.com
fe3.delivery.dsp.mp.microsoft.com.nsatc.net
cs9.wac.phicdn.net
geo-prod.do.dsp.mp.microsoft.com
slscr.update.microsoft.com
v10.events.data.microsoft.com

# Access for Installing docker, needed by `gkectl prepare windows` on the Windows VM
dockermsft.azureedge.net

Step 4: Add a Windows node pool to the user cluster configuration file

  1. Dataplane V2 must be enabled in your user cluster to use Windows node pools. Add the following line to your user cluster configuration file to enable Dataplane V2:

    enableDataplaneV2: true
    
  2. Add a Windows node pool to your nodePools section in the user cluster configuration file. At least one Linux node pool is required in addition to your Windows node pools. Set the osImage and osImageType fields to create Windows node pools:

  • osImage: Replace WINDOWS_VM_TEMPLATE_NAME with the name of your prepared Windows VM template in step 1, which should be in the same vCenter datastore specified in the user cluster configuration file.
  • osImageType: Specify the OS image type to be windows.
# user-cluster.yaml

nodePools:
- name: windows-nodepool-1
  cpus: 8
  memoryMB: 16384
  replicas: 3
  bootDiskSizeGB: 100
  osImage: WINDOWS_VM_TEMPLATE_NAME
  osImageType: windows

Step 5: Create Windows node pools

Before you create Windows node pools, run a list of preflight validators for Windows. Skip this step if you already have a user cluster. - (Optional) Run either or both the fast and slow preflight checks, which create a test VM for Windows and validate the Windows VM template:

gkectl check-config --config USER_CLUSTER_CONFIG --kubeconfig ADMIN_CLUSTER_KUBECONFIG
  • This command is intended for you to run before creating a user cluster. If you already have a user cluster, certain checks might fail. For example, the IP addresses in the hostconfig.yaml file might already be in use by existing nodes in your user cluster.
  • Although not recommended, you can skip the Windows preflight checks with the --skip-validation-windows flag.
  • Managing Windows node pools is the same as it is for Linux node pools. See Managing node pools. The commands for creating, updating, and upgrading clusters and node pools also remain the same and are listed here.
# Create a new cluster
gkectl create cluster --kubeconfig ADMIN_CLUSTER_KUBECONFIG --config USER_CLUSTER_CONFIG

# Update an existing cluster with the new Windows node pool
gkectl update cluster --kubeconfig ADMIN_CLUSTER_KUBECONFIG --config USER_CLUSTER_CONFIG

# Upgrade an existing cluster with the new Windows node pool
gkectl upgrade cluster --kubeconfig ADMIN_CLUSTER_KUBECONFIG --config USER_CLUSTER_CONFIG

Step 6: Validate Windows nodes are running

  1. Check that your Windows nodes have been created and are Ready.

    kubectl --kubeconfig USER_KUBECONFIG get nodes 
    
  2. Diagnose the user cluster to check whether it's healthy.

    gkectl diagnose cluster --kubeconfig ADMIN_CLUSTER_KUBECONFIG  --cluster-name CLUSTER_NAME
    

Deploy a Windows Pod

Windows Server nodes are tainted with this key-value pair: node.kubernetes.io/os=windows:NoSchedule.

This taint ensures that the GKE scheduler does not attempt to run Linux containers on Windows Server nodes. To schedule Windows Server containers on Windows Server nodes, your manifest file must include this nodeSelector section:

nodeSelector:
    kubernetes.io/os: windows

With nodeSelector configured, an admission webhook running in the cluster checks new workloads for the presence of this Windows node selector and when found, applies the following toleration to the workload which allows it to run on the tainted Windows Server nodes:

tolerations:
- key: "node.kubernetes.io/os"
  operator: "Equal"
  value: "windows"
  effect: "NoSchedule"

Step 1: Create an Internet Information Services (IIS) deployment file

Here is a sample configuration, which deploys Microsoft's official IIS image to a single Pod.

Create an IIS file named iis.yaml with the following content:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: iis
  labels:
    app: iis
spec:
  replicas: 1
  selector:
    matchLabels:
      app: iis
  template:
    metadata:
      labels:
        app: iis
    spec:
      nodeSelector:
        kubernetes.io/os: windows
      containers:
      - name: iis-server
        image: mcr.microsoft.com/windows/servercore/iis
        ports:
        - containerPort: 80
---
apiVersion: v1
kind: Service
metadata:
  labels:
    app: iis
  name: iis
spec:
  ports:
  - port: 80
    protocol: TCP
    targetPort: 80
  selector:
    app: iis
  sessionAffinity: None
  type: LoadBalancer
  loadBalancerIP: [Fill in with an available IP address]

Step 2: Create the deployment and expose it via a service

# Create the deployment
kubectl --kubeconfig USER_CLUSTER_KUBECONFIG create -f iis.yaml

Step 3: Validate the Pod

Check the status of the Pod using kubectl.

kubectl --kubeconfig USER_CLUSTER_KUBECONFIG get pods

Wait until the returned output shows that the Pod has a status of "Running".

NAME                   READY     STATUS    RESTARTS   AGE
iis-5c997657fb-w95dl   1/1       Running   0          28s

Get the status of the service, and wait until the external IP field is populated.

kubectl --kubeconfig USER_CLUSTER_KUBECONFIG  get service iis

Expected output:

NAME   TYPE           CLUSTER-IP    EXTERNAL-IP   PORT(S)        AGE
iis    LoadBalancer   10.44.2.112   35.x.x.x     80:32233/TCP   17s

You can use your browser to open http://EXTERNAL_IP to see the IIS web page!

Upgrade user cluster with Windows node pools

The upgrade process for a user cluster with Windows node pools is similar to that for upgrading Linux-only user clusters, except that you must create a Windows VM template from a base VM template before upgrading.

You can update the patch build version of the base VM template during upgrade by downloading a newer patch version of Windows Server 2019 from Microsoft as a security patch. See Security patch process.

gkectl prepare windows --base-vm-template $BASE_WINDOWS_VM_TEMPLATE_NAME --bundle-path BUNDLE_PATH --kubeconfig ADMIN_CLUSTER_KUBECONFIG

Update the node pool's osImage field at the config file with the new VM template name. Run the command below for upgrading the user cluster:

gkectl upgrade cluster --kubeconfig ADMIN_CLUSTER_KUBECONFIG --config USER_CLUSTER_CONFIG

Replace the following:

  • ADMIN_CLUSTER_KUBECONFIG with the path of your admin kubeconfig file
  • ADMIN_CLUSTER_CONFIG with the path of your admin cluster configuration file

Accessing Windows nodes

The standard way to access Windows nodes is with a username and password, which differs from Linux nodes, which are typically accessed via ssh key pairs for authentication.

For Windows nodes on vSphere, the username is Administrator. The password is generated by the clusterapi-controller and stored in the windows-node-password secret in the admin cluster's user namespace. The command for getting the password from that secret is:

kubectl get secret windows-node-password -n [USER_CLUSTER_NAME] --kubeconfig admin-kubeconfig.yaml -o jsonpath={.data.*} | base64 -d

You can also use get the password using the vCenter user interface. Navigate to the VM that you want to log into, and then you can find the password at the password vApp property of that VM.

Once you have the username and password, you can access your Windows VM using any of the following approaches:

Using Remote Desktop Protocol

Because the RDP has been enabled during the template build, you can access your Windows VM by using a RDP client.

Using SSH

To ssh into a Windows VM:

ssh Administrator@[VM_IP_ADDRESS]

Follow the prompt to type in the password to connect to your VM.

Transferring files from and to your Windows VM

You can transfer files from and to your Windows VM with the scp command:

Upload files to Windows VM:

scp [LOCAL_FILE_PATH] Administrator@[VM_IP_ADDRESS]:/[REMOTE_FILE_PATH]

Download files from Windows VM:

scp Administrator@[VM_IP_ADDRESS]:/[REMOTE_FILE_PATH] [LOCAL_FILE_PATH]

Type the password when prompted.

Alternatively, you can also transfer files by using Cloud Storage or using RDP, as described in  Transferring files to Windows VMs.

Updating your Windows Server configuration

Containerd and Windows Dataplane V2 are now general availability as of version 1.11.

Docker and Flannel for Windows nodes will be deprecated in a subsequent release. We recommend that you update your configuration now, if applicable, to use containerd and Windows Dataplane V2 instead. See Update Windows Server configuration.

Cannot SSH/RDP to the Windows VM

Check if the VM has a network connection by running Test-NetConnection on your vCenter web console.

The result should contain PingSucceeded: true if there is a network connection. If the VM does not have a network connection, check the network adapter used for this VM. Make sure that the network allows inbound connections to the VM from your workstation where you want to run the SSH/RDP.

Verify that the kubelet, kube-proxy, and CNI service are running on the Windows VM

Connect to your VM following the steps here and run the following commands, depending on your setup:

  1. For all configurations, run these commands:

    # Check that kubelet and kube-proxy services have status 'Running'
    Get-Service kubelet
    Get-Service kube-proxy
    
  2. If your cluster is configured with windowsDataplaneV2 set to true, check that the antrea-agent, ovsdb-server and ovs-vswitchd services are 'Running'.

    # Check that CNI services have the status of 'Running'
    Get-Service antrea-agent
    Get-Service ovsdb-server
    Get-Service ovs-vswitchd
    
  3. Otherwise, check that the flanneld process is 'Running':

    # Check that the flanneld process exists
    Get-Process flanneld
    

Using the snapshot tool

Use the snapshot tool to grab the snapshot tarball. This tarball contains the log files on nodes as well as outputs for troubleshooting commands running on the node.

gkectl diagnose snapshot --scenario system-with-logs --cluster-name [USER_CLUSTER_NAME] --kubeconfig [PATH_TO_KUBECONFIG]

Windows VM creation fails

Check the logs from the vsphere-controller-manager container in the clusterapi-controllers Pod in the user namespace of the admin cluster.

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONFIG -n USER_CLUSTER_NAME logs clusterapi-controllers-POD_NAME_SUFFIX vsphere-controller-manager

Ensure that your VM template is located in the same datacenter and datastore as specified in your user cluster configuration file.

Windows VM is created, but the node fails to start properly or show up

  • Check the startup logs on the node located at C:\var\log\startup.log to see if anything failed to start.

    • If flanneld is not running, try to rerun the startup script located at C:\etc\startup\startup-script.ps1
    • If kubelet is not running, check the kubelet logs under C:\var\log.
    • If kube-proxy is not running, check the kube-proxy logs under C:\var\log.
  • Check if the cloudbase-init has already executed the UserDataPlugin before running the startup script.

To check this, get an SSH connection to the Windows VM and run the following command:

ls "HKLM:\\Software\Cloudbase Solutions\Cloudbase-Init\id-ovf\"

If you find UserDataPlugin: 1 in the output, that means the cloudbase-init has already executed that plugin, which will cause the startup script execution to be skipped, and windows node won't be bootstrapped at all.

This is usually caused by converting the VM template generated by gkectl prepare windows back to an VM and powering it on.

To resolve this, create a new VM template by running gkectl prepare windows again and use it for create/upgrade/update windows node pool.

Logging and Monitoring

Google Distributed Cloud supports logging and monitoring for Windows nodes and Pods, as it does for Linux nodes and Pods.

When logging and monitoring are configured, agents are deployed on Windows nodes. These agents collect, process, and export the node's logs and metrics.

Windows logging Agent

The Windows logging agent collects the following logs:

  • Pod resource type: system and user application workloads.

    Note that Windows user application workloads logs are collected by default. To disable application logs:

    • Edit the fluent-bit-windows-config configmap and comment out the [Input] item that collects the application logs (the first [Input] item):
      kubectl --kubeconfig KUBECONFIG edit configmap fluent-bit-windows-config -n kube-system
      
      Make sure to comment out all fields under this item. For example:
      #    [INPUT]
      #      # https://docs.fluentbit.io/manual/input/tail
      #      Name               tail
      #      Tag_Regex          var.log.containers.(?a-z0-9?(?:.a-z0-9?))_(?[^]+)(?.+)-(?[a-z0-9]{64}).log$
      #      Tag                k8s_container...
      #      Path               C:\var\log\containers\.log
      #      Exclude_Path       kube-system.log,gke-connect.log,knative-serving.log,gke-system.log,istio-system.log,monitoring-system.log,config-management-system.log,gatekeeper-system.log,cnrm-system.log
      #      DB                 C:\var\log\fluent-bit-k8s-container-application.db
      #      Mem_Buf_Limit      30MB
      #      Skip_Long_Lines    On
      #      Refresh_Interval   10
      #      # storage.type       filesystem
      #      Buffer_Chunk_Size  512KB
      #      Buffer_Max_Size    5M
      #      Rotate_Wait        30
      #      Ignore_Older       4h
      
    • Run the rollout restart command to restart the fluent-bit-windows daemonset:
      kubectl --kubeconfig KUBECONFIG rollout restart daemonset fluent-bit-windows -n kube-system
      
  • Node resource type: kubelet, kube-proxy and Windows event-logs

You can access logs using the Logs Explorer in the console. See Access logs for more information.

Windows monitoring Agent

The Windows monitoring agent collect a different set of CPU and memory usage metrics than the Linux monitoring agent. To monitor the Windows nodes and Pods status, use the prepared dashboards. From the console, select Monitoring > Dashboards, and then select "GKE on-prem Windows node status" and "GKE on-prem Windows pod status" from the All Dashboards list.

These dashboards are automatically created during admin cluster installation if Cloud Monitoring is enabled. If you already have an admin cluster running, follow these instructions to create these dashboards, using the following json files:

See the full list of metrics collected by the Windows agents.

Windows persistent storage

When working with Windows Server containers with persistent storage, you must create a StorageClass object, and specify the name of that object in the storageClassName field of the PersistentVolumeClaim object, because the default StorageClass in on-prem user cluster uses ext4 as the file system type, which only works for Linux containers. For Windows, we need to set the file system type to ntfs.

Example Windows storage class:

kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
  name: my-storage-class
provisioner: kubernetes.io/vsphere-volume
parameters:
  datastore: my-datastore
  diskformat: thin
  fstype: ntfs

CSI proxy is deployed automatically onto Windows nodes. You can install and use a Windows CSI driver of your choice, such as the SMB CSI driver.

Node Problem Detector on Windows nodes

The Node Problem Detector daemon is available on Windows nodes. If you have upgraded to version 1.9, Node Problem Detector is enabled automatically. Node Problem Detector helps with quick detection of some common node problems. Node Problem Detector keeps checking for possible problems and reports them as events and conditions on the node. When a node misbehaves, you can use the kubectl command to find corresponding events and conditions.

The following monitor configurations are enabled for Node Problem Detector:

To get events and conditions on a node:

kubectl --kubeconfig KUBECONFIG describe nodes NODE_NAME

Replace:

  • KUBECONFIG with the path of the kubeconfig file for the cluster that contains the node.
  • NODE_NAME with the name of the node.

To identify the events generated by the Node Problem Detector monitors, look for the monitor name in the reason field of a rule specified in the rules section.

Node Problem Detector monitors also generate the following conditions on the node. Each of these is set to true if Node Problem Detector detects the corresponding failure scenario on the node.

  • KubeletUnhealthy
  • KubeProxyUnhealthy
  • ContainerRuntimeUnhealthy

Whenever one of the conditions is set to true, the node's Ready condition will become false, which prevents new Pods from being scheduled on the node.

When an unhealthy condition is found, Node Problem Detector attempts to auto-repair the node by restarting the relevant system service.

Node Problem Detector logs are located in the node's C:\var\log\node-problem-detector folder. If logging and monitoring are enabled, the log is exported to Cloud Logging and you can view them in the Logs Explorer.

Use this filter to get Node Problem Detector logs in Logs Explorer:

resource.type="k8s_node"
log_name="projects/PROJECT_NAME/logs/node-problem-detector"

Replace PROJECT_NAME with the project name.

Security patch process

Besides the regular patch releases for the supported Anthos versions, the Anthos team also continuously qualifies newer Windows patch updates during non-release time periods, and publishes the results for your reference. If an urgent security patch update is needed between Anthos patch releases, you can build a new VM template using the latest version, and then perform a rolling update for the existing Windows node pools to use the new template.

The security patch process includes these steps:

  • Microsoft releases a new security patch for Windows Server 2019.
  • Anthos qualifies the latest security patch version and announces the qualification result.
  • If qualified, users will:
    • Download the latest patch version from Microsoft
    • Build a new Windows VM template using this patch version following the steps here.
    • Update the Windows node pools to use the new template by running:
gkectl update cluster --kubeconfig ADMIN_CLUSTER_KUBECONFIG --config USER_CLUSTER_CONFIG
  • If the new version requires changes from Anthos's side, you must wait for the next monthly Anthos patch release and upgrade the clusters.

  • If the new Windows version is not compatible with Anthos at all, the Anthos team will skip that version and wait for the next security update from Microsoft.

Active Directory domain join

Active Directory domain join requires the length of the VM hostname to be <= 15 characters. For IPAM mode, because the VM hostname is set in the user cluster configuration file, you must ensure the length is <= 15 characters. These instructions are based on the instructions for creating Windows node pools, with the additional step of supplying a customized script during the Windows VM template build.

Verify the Active Domain DNS server is reachable

Active Directory Domain Services (AD DS) uses Domain Name System (DNS) name resolution services to make it possible for clients to locate domain controllers and for the domain controllers that host the directory service to communicate with each other.

The DNS server was created when the AD DS role installed the root forest. For any Windows VM to join the AD domain, it must be able to reach the DNS server. Configure the DNS and firewall configurations following the guidance of the DNS service provider that you are using. You can verify whether the Windows VMs in the current network can contact the AD domain DNS server by running this command:

PS C:\> nslookup DOMAIN_NAME DOMAIN_SERVER_IP
Server:  example-1-2-3-4.anthos
Address:  1.2.3.4
Name:    example.org
Address:  1.2.3.4

Step 1: Create Windows VM template with a customized script

  1. Execute a customized script before the Windows node joins the user cluster for Active Directory domain join. Store this script to a local path on your admin workstation. Note that:

    • You can replace the script with your own script for doing the Active Directory domain join.
    • It is recommended that you use a user account with the minimum permissions required for an Active Directory domain join, instead of using an Administrator user.
    • (Optional) To avoid storing the password as cleartext in this script, place the password in a file on the VM template, let the script read from that password file, then delete the file after the domain join.
    $domain = "[DOMAIN_NAME]"
    $password = "[PASSWORD]" | ConvertTo-SecureString -asPlainText -Force
    $username = "$domain\[USERNAME]"
    $credential = New-Object System.Management.Automation.PSCredential($username,$password)
    Add-Computer -DomainName $domain -Credential $credential -restart –force
    
  2. Create a Windows VM template with a customized script:

    gkectl prepare windows --base-vm-template BASE_WINDOWS_VM_TEMPLATE_NAME --bundle-path BUNDLE_PATH --kubeconfig ADMIN_CLUSTER_KUBECONFIG --customized-script CUSTOMIZED_SCRIPT_PATH
    

Replace BUNDLE_PATH with the path to the bundle.

Step 2: Create a Windows node pool

Proceed with the standard instructions in Steps 2-6 to create a Windows node pool using the customized Windows VM template.

Step 3: Verify the Active Domain joining for the Windows nodes

On the AD domain controller VM, run the following command:

PS C:\> Get-ADComputer -Filter 'Name -like "user-host-prefix*"'

DistinguishedName : CN=AD-VM-1,CN=Computers,DC=example,DC=org
DNSHostName       : ad-vm-1.example.org
Enabled           : True
Name              : AD-VM-1
ObjectClass       : computer
ObjectGUID        : b3609717-d24b-4df6-bccb-26ca8e8b9eb0
SamAccountName    : AD-VM-1$
SID               : S-1-5-21-3236879623-1561052741-2808297733-1103

Step 4: Configure Group Managed Service Accounts (optional)

Follow these instructions: Configure GMSA for Windows Pods and containers. You can configure GMSA for Windows pods and containers after the nodes are domain joined.

Troubleshooting

Logs for the customized script execution of cloudbase-init are located at C:\Program Files\Cloudbase Solutions\Cloudbase-Init\log\cloudbase-init.log. Look for LocalScriptPlugin in the log file, and check the related logs. - Build a new Windows VM template. - Update the Windows node pools to use the new template by running:

gkectl update cluster --kubeconfig ADMIN_CLUSTER_KUBECONFIG --config USER_CLUSTER_CONFIG

Considerations for Windows containers

Some notable differences between Windows and Linux containers are:

  • Version compatibility of Windows container images and the host/node OS images.
    • The Windows Server OS version tuple has four parts: major, minor, build, and revision.
    • The Windows server container base image must match the first three parts of the version tuple of the host OS image. The revision need not match, although it is recommended that you update both the host and container base images.
    • Users need to rebuild their container images whenever the OS image version changes
  • Privileged containers and host namespaces are not supported.
    • Users cannot configure/change nodes by deploying containers, such as Daemonsets.

Limitations for Google Distributed Cloud on vSphere Windows

  • User clusters must contain at least one Linux node pool.

    • You cannot create a cluster with only a Windows node pool
    • The Linux node pools are required to run critical add-ons.
  • Because 1.5 times more resources are reserved for Windows nodes than Linux nodes, the allocatable resources for Windows are lower.

  • The use of Windows nodes might require a larger minimum machine size than the Google Distributed Cloud Linux minimum machine size. Windows nodes typically require more resources because of the higher overhead of running node components/services.

Known Issues

This section lists known issues with Windows nodes used with Google Distributed Cloud, along with workarounds to avoid or recover from these issues.

Windows Pods cannot talk to external IP addresses

This issue is described in Microsoft documentation, which states "You need to exclude the external IP you are trying to query from the ExceptionList."

Contact Google Cloud Support to proceed with a workaround solution.

Windows containers are not cleaned up after removing Windows Pods

This is a known issue, in which docker RemoveContainer also tries to call CreateFile on Windows. As a workaround, log in to the Windows node that has the issue, run Restart-Service docker and the issue should be mitigated. From Google Distributed Cloud 1.9, the fluent-bit-win container image version and docker version have been updated to pick up the upstream fixes for this issue, this shouldn't reproduce any more. If you encounter this issue, contact Google Cloud Support.

Windows nodes having IP address conflicts

This is a known issue that happens very rarely, if you encounter this during Windows node pool creation, you can mitigate this following the steps:

  • If you are using IPAM mode, you can manually remove the VMs that having IP conflicts from vCenter, new VMs will be created automatically which should have correct IP allocations. Or you could just wait for the node auto repair to detect this issue and recreate the Windows nodes.

  • If you are using DHCP mode, the newly created VMs are likely to have duplicated IPs again since the DHCP server is encountering issues for IP allocation, you can delete the pending Windows node pool by running gkectl update cluster, and add it back in user-cluster.yaml, run gkectl update cluster again for creating it, the newly created node pool should have correct IP allocations.

Windows node becomes NotReady after rebooting the VM

Currently, the node startup script only runs the first time the VM is powered on, so if you reboot the VM, the startup script does not run again. This will cause some Windows services to stop running, including the kubelet, kube-proxy services, and so forth. This causes the node to be in NotReady status. If you are using Windows Dataplane V2, the stale network also needs to be cleaned up before the Dataplane V2 services can restart, and it will require running a script for cleanup, which might cause complications. Therefore, re-create the node instead. As a workaround, you can delete the node by running the command below and wait for the controller to automatically recreate it.

kubectl --kubeconfig USER_KUBECONFIG delete node NODE_NAME

Diagnose command fails when Windows VM hardware versions are lower than expected

When the Windows VM template is using an old hardware version, the gkectl diagnose cluster command fails with the following message:

Checking storage...FAILURE
    Reason: 1 storage error(s).
    Unhealthy Resources:
    CSIPrerequisites [VM Hardware]: The current VM hardware versions are lower than vmx-15 which is unexpected. Please contact Anthos support to resolve this issue. Use --detailed=true for the list of VMs.
    Debug Information:
    {
      "NODE_NAME": "vmx-XX",
    }

To fix this issue, follow these steps:

  1. Rename the VM template currently in use.

    This is needed to be able to create a new VM template in the next steps.

  2. Convert the Windows base VM template to a VM.

  3. Follow the steps in Upgrading a virtual machine to the latest hardware version to upgrade the hardware version of the VM.

  4. Convert the VM back to a VM template.

  5. Run the following command to prepare a new VM template, using the upgraded VM template from previous steps as the base VM template.

    gkectl prepare windows
    

    The new generated VM template name should match the windows node pool osImage field value in the user cluster config file. If the values match, continue to the next step to recreate the Windows node.

    If the template name doesn't match the osImage field value, update the osImage value to match the new generated VM template name and run the following command:

    gkectl update cluster
    
  6. Re-create the Windows node by running the following command:

    kubectl --kubeconfig USER_KUBECONFIG delete node NODE_NAME
    

    Wait for the controller to automatically recreate the node.