Cette page fournit des exemples d'utilisation de la commande gcloud container vmware clusters create pour créer un cluster d'utilisateur.
Après avoir créé le cluster d'utilisateur, vous devez créer au moins un pool de nœuds.
Vous pouvez utiliser la commande gcloud container vmware node-pools create pour créer un pool de nœuds.
Tous les exemples utilisent les valeurs par défaut pour le plan de contrôle. Ces indicateurs ne sont donc pas inclus.
PPDC
Cette section présente des exemples d'obtention d'adresses IP pour vos nœuds de cluster à partir d'un serveur DHCP.
Pour obtenir une description des options F5, consultez la section Équilibreur de charge.
IP statiques
Cette section fournit des exemples d'utilisation d'adresses IP statiques pour vos nœuds de cluster. Un cluster d'utilisateur doit disposer d'une adresse IP pour chaque nœud et d'une adresse IP supplémentaire pour un nœud temporaire, nécessaire lors des mises à niveau, des mises à jour et de la réparation automatique du cluster. Pour obtenir une description de l'option --static-ip-config-ip-blocks, consultez la section Mise en réseau.
Sauf indication contraire, le contenu de cette page est régi par une licence Creative Commons Attribution 4.0, et les échantillons de code sont régis par une licence Apache 2.0. Pour en savoir plus, consultez les Règles du site Google Developers. Java est une marque déposée d'Oracle et/ou de ses sociétés affiliées.
Dernière mise à jour le 2024/05/03 (UTC).
[[["Facile à comprendre","easyToUnderstand","thumb-up"],["J'ai pu résoudre mon problème","solvedMyProblem","thumb-up"],["Autre","otherUp","thumb-up"]],[["Difficile à comprendre","hardToUnderstand","thumb-down"],["Informations ou exemple de code incorrects","incorrectInformationOrSampleCode","thumb-down"],["Il n'y a pas l'information/les exemples dont j'ai besoin","missingTheInformationSamplesINeed","thumb-down"],["Problème de traduction","translationIssue","thumb-down"],["Autre","otherDown","thumb-down"]],["Dernière mise à jour le 2024/05/03 (UTC)."],[[["\u003cp\u003eThis page provides examples of using the \u003ccode\u003egcloud container vmware clusters create\u003c/code\u003e command to create user clusters with different configurations.\u003c/p\u003e\n"],["\u003cp\u003eExamples are provided using DHCP or static IPs for node addressing, and can be used with a MetalLB, F5, or manual load balancer.\u003c/p\u003e\n"],["\u003cp\u003eAfter creating a user cluster, a node pool must be created using the \u003ccode\u003egcloud container vmware node-pools create\u003c/code\u003e command, as shown in the final example.\u003c/p\u003e\n"],["\u003cp\u003eThe examples use default settings for the control plane, so those flags are not included in the command.\u003c/p\u003e\n"],["\u003cp\u003eIt is important to replace the provided IP addresses and CIDR ranges in the examples with values that match your network, as detailed in the "Plan your IP addresses" section.\u003c/p\u003e\n"]]],[],null,["# Examples using the gcloud CLI to create a user cluster\n\n\u003cbr /\u003e\n\nThis page provides examples of using the command\n`gcloud container vmware clusters create` to create a user cluster.\nAfter creating the user cluster, you need to create at least one node pool.\nYou can use the command\n`gcloud container vmware node-pools create` to\n[create a node pool](#create_a_node_pool).\n| **Important:** These are examples. You must replace the IP addresses and CIDR ranges with values from your network. See [Plan your IP addresses](/anthos/clusters/docs/on-prem/1.16/how-to/plan-ip-addresses) for more information.\n\nAll of the examples use the defaults for the\n[control plane](/anthos/clusters/docs/on-prem/1.16/how-to/create-user-cluster-api#control_plane),\nso those flags aren't included.\n\nDCHP\n----\n\nThis section shows examples of getting IP addresses for you cluster nodes from\na DHCP server. \n\n### MetalLB\n\n```\ngcloud container vmware clusters create user-cluster-1 \\\n --project=example-project-12345 \\\n --location=us-west1 \\\n --admin-cluster-membership=projects/example-project-12345/locations/global/memberships/admin-cluster-1 \\\n --version=1.16.7-gke.46 \\\n --admin-users=sara@example.com \\\n --admin-users=amal@example.com \\\n --enable-dhcp \\\n --service-address-cidr-blocks=10.96.232.0/24 \\\n --pod-address-cidr-blocks=192.168.0.0/16 \\\n --metal-lb-config-address-pools='pool=lb-pool-1,manual-assign=False,avoid-buggy-ips=True,addresses=10.251.133.0/24;10.251.134.80/32;10.251.134.81/32' \\\n --metal-lb-config-address-pools='pool=lb-pool-2,manual-assign=True,addresses=172.16.20.62/32' \\\n --control-plane-vip=172.16.20.61 \\\n --ingress-vip=172.16.20.62\n```\n\nFor a description of the `--metal-lb-config-address-pools` flag,\nsee [Load balancer](/anthos/clusters/docs/on-prem/1.16/how-to/create-user-cluster-api#load_balancer).\n\n### F5 load balancer\n\n```\ngcloud container vmware clusters create user-cluster-2 \\\n --project=example-project-12345 \\\n --location=us-west1 \\\n --admin-cluster-membership=projects/example-project-12345/locations/global/memberships/admin-cluster-1 \\\n --version=1.16.7-gke.46 \\\n --admin-users=sara@example.com \\\n --admin-users=amal@example.com \\\n --enable-dhcp \\\n --service-address-cidr-blocks=10.96.232.0/24 \\\n --pod-address-cidr-blocks=192.168.0.0/16 \\\n --f5-config-address=203.0.113.2 \\\n --f5-config-partition=my-f5-admin-partition \\\n --control-plane-vip=172.16.20.61 \\\n --ingress-vip=172.16.20.62\n```\n\nFor a description of the F5 flags, see\n[Load balancer](/anthos/clusters/docs/on-prem/1.16/how-to/create-user-cluster-api#load_balancer).\n\nStatic IPs\n----------\n\nThis section provides examples using static IPs for your cluster nodes. A user\ncluster needs to have one IP address for each node and an additional IP address\nfor a temporary node that is needed during cluster upgrades, updates, and\nauto repair. For a description of the `--static-ip-config-ip-blocks` flag\nsee [Networking](/anthos/clusters/docs/on-prem/1.16/how-to/create-user-cluster-api#networking). \n\n### MetalLB\n\n```\ngcloud container vmware clusters create user-cluster-3 \\\n --project=example-project-12345 \\\n --location=europe-west1 \\\n --admin-cluster-membership=projects/example-project-12345/locations/global/memberships/admin-cluster-1 \\\n --version=1.16.7-gke.46 \\\n --admin-users=sara@example.com \\\n --admin-users=amal@example.com \\\n --static-ip-config-ip-blocks='gateway=172.16.23.254,netmask=255.255.252.0,ips=172.16.20.10 user-vm-1;172.16.20.11 user-vm-2' \\\n --static-ip-config-ip-blocks='gateway=172.16.23.255,netmask=255.255.252.0,ips=172.16.20.12 user-vm-3;172.16.20.13 extra-vm' \\\n --dns-servers=203.0.113.1,198.51.100.1 \\\n --dns-search-domains=example.com,altostrat.com \\\n --ntp-servers=216.239.35.4,216.239.35.5 \\\n --service-address-cidr-blocks=10.96.232.0/24 \\\n --pod-address-cidr-blocks=192.168.0.0/16 \\\n --metal-lb-config-address-pools='pool=lb-pool-1,manual-assign=False,avoid-buggy-ips=True,addresses=10.251.133.0/24;10.251.134.80/32;10.251.134.81/32' \\\n --metal-lb-config-address-pools='pool=lb-pool-2,manual-assign=True,addresses=172.16.20.62/32' \\\n --control-plane-vip=172.16.20.61 \\\n --ingress-vip=172.16.20.62\n```\n\n### Manual load balancer\n\n```\ngcloud container vmware clusters create user-cluster-4 \\\n --project=example-project-12345 \\\n --location=asia-east1 \\\n --admin-cluster-membership=projects/example-project-12345/locations/global/memberships/admin-cluster-1 \\\n --version=1.16.7-gke.46 \\\n --admin-users=sara@example.com \\\n --admin-users=amal@example.com \\\n --static-ip-config-ip-blocks='gateway=172.16.23.254,netmask=255.255.252.0,ips=172.16.20.10 user-vm-1;172.16.20.11 user-vm-2' \\\n --static-ip-config-ip-blocks='gateway=172.16.23.255,netmask=255.255.252.0,ips=172.16.20.12 user-vm-3;172.16.20.13 extra-vm' \\\n --dns-servers=203.0.113.1,198.51.100.1 \\\n --ntp-servers=216.239.35.4,216.239.35.5 \\\n --service-address-cidr-blocks=10.96.232.0/24 \\\n --pod-address-cidr-blocks=192.168.0.0/16 \\\n --control-plane-vip=172.16.20.61 \\\n --control-plane-node-port=30968 \\\n --ingress-vip=172.16.20.62 \\\n --ingress-http-node-port=32527 \\\n --ingress-https-node-port=30139 \\\n --konnectivity-server-node-port=30969\n```\n\nCreate a node pool\n------------------\n\nYou can use the following command to create a node pool:\n\n```\ngcloud container vmware node-pools create default-pool \\\n --cluster=user-cluster-1 \\\n --project=example-project-12345 \\\n --location=us-west1 \\\n --image-type=ubuntu_containerd \\\n --boot-disk-size=40 \\\n --cpus=8 \\\n --memory=8192 \\\n --replicas=5 \\\n --min-replicas=5 \\\n --max-replicas=10 \\\n --enable-load-balancer\n \n```\n\nFor descriptions of the flags, see\n[Create a node pool](/anthos/clusters/docs/on-prem/1.16/how-to/create-user-cluster-api#create_the_cluster_and_node_pools).\n\nWhat's next\n-----------\n\n- [Create a user cluster](/anthos/clusters/docs/on-prem/1.16/how-to/create-user-cluster-api#create_a_user_cluster)\n- [The gcloud CLI reference](/sdk/gcloud/reference/beta/container/vmware)"]]
