Version 1.16. This version is no longer supported. For more information see the version support policy.

Configure a storage policy

This document shows how to configure a VM storage policy for a Google Distributed Cloud cluster.

Overview

In vSphere, Storage Policy Based Management (SPBM) helps to align storage with the application demands of virtual machines. It provides a storage policy framework that serves as a single unified control panel across a broad range of data services and storage solutions.

In an Anthos cluster on VMware, you can specify storage policies as an alternative to specifying datastores. You define storage policies based on your application requirements and then vSphere selects and manages datastores automatically. This can reduce the overhead and maintenance associated with storage.

Inheritance

You can specify a storage policy for an admin cluster, a user cluster, a node pool in a user cluster, or a set of control-plane nodes in a user cluster.

If you specify a storage policy for a user cluster, then the policy is inherited by the node pools in the user cluster. If you specify a storage policy for an individual node pool, that policy is used instead of the cluster-level storage policy. Likewise if you specify a datastore for an individual node pool, that datastore is used instead of the cluster-level storage policy.

In a user cluster that has Controlplane V2 enabled, the cluster-level storage policy is inherited by the control-plane nodes. If you specify a storage policy or datastore for the control-plane nodes, that storage policy or datastore is used instead of the cluster-level storage policy.

Applying storage policies to datastores

You can apply a storage policy to a single datastore or to multiple datastores. If you apply a storage policy to multiple datastores, then the storage resources for an admin cluster, user cluster, or node pool can be spread out among the datastores.

Example: Create a storage policy and a user cluster

This section gives an example creating a storage policy and a user cluster. This example illustrates the idea that a storage policy can apply to two datastores.

Apply tags to datastores

To do the steps in this example, your vSphere environment must have at least two datastores.

The vSphere cluster that will host the nodes for your user cluster must have access to the datastores that you plan to use for this exercise. There is a preflight check that verifies this.

The vCenter account that you use to apply tags must have the following vSphere tagging privileges privileges on the root vCenter Server:

vSphere Tagging.Create vSphere Tag
vSphere Tagging.Create vSphere Tag Category
vSphere Tagging.Assign or Unassign vSphere Tag

In the vSphere Client, assign the same tag to each of the datastores that you have chosen to use for this exercise. For instructions, see Assign Tags to Datastores.

For additional information, see vSphere Tags and Attributes.

Create a storage policy

In the vSphere Client, create a VM storage policy for tag-based placement. In the storage policy, specify the tag that you applied to your chosen datastores. For instructions, see Create a VM storage policy for Tag-Based Placement.

For additional information, see VM storage policy.

If you are using a vSAN datastore, see vSAN storage policy.

Create a user cluster

In this exercise, you create a user cluster that has a high-availability control plane, so there are three control-plane nodes. In addition to the control-plane nodes, there are six worker nodes, three in one node pool and three in a second node pool. All nodes use static IP addresses.

Start by following the instructions in Create a user cluster (ControlPlane V2).

As you fill in your user cluster configuration file:

Set the value of vCenter.storagePolicyName to the name of an existing storage policy. Do not set a value for vCenter.datastore.
Specify two node pools. For the first node pool, do not specify a datastore, and do not specify a storage policy. For the second node pool, set the value of vsphere.datastore to the name of an existing datastore.

Example cluster configuration file

Here is an example of an IP block file and a portion of a user cluster configuration file.

user-ipblock.yaml

blocks:
  - netmask: 255.255.255.0
    gateway: 172.16.21.1
    ips:
    - ip: 172.16.21.2
    - ip: 172.16.21.3
    - ip: 172.16.21.4
    - ip: 172.16.21.5
    - ip: 172.16.21.6
    - ip: 172.16.21.7
    - ip: 172.16.21.8

user-cluster-yaml

apiVersion: v1
kind: UserCluster
...
vCenter:
  storagePolicyName: "my-storage-policy"
network:
  hostConfig:
    dnsServers:
    - "203.0.113.2"
    - "198.51.100.2"
    ntpServers:
    - "216.239.35.4"
  ipMode:
    type: "static"
    ipBlockFilePath: "user-ipblock.yaml"
  controlPlaneIPBlock:
    netmask: "255.255.255.0"
    gateway: "172.16.21.1"
    ips:
    - ip: "172.16.21.9"
      hostname: "cp-vm-1"
    - ip: "172.16.21.10"
      hostname: "cp-vm-2"
    - ip: "172.16.21.11"
      hostname: "cp-vm-3"
loadBalancer:
  vips:
    controlPlaneVIP: "172.16.21.40"
    ingressVIP: "172.16.21.30"
  kind: MetalLB
  metalLB:
    addressPools:
    - name: "address-pool-1"
      addresses:
    - "172.16.21.30-172.16.21.39"
...
enableControlplaneV2: true
masterNode:
  cpus: 4
  memoryMB: 8192
  replicas: 3
nodePools:
- name: "worker-pool-1"
  enableLoadBalancer: true
- name: "worker-pool-2"
  vSphere:
    datastore: "my-np2-datastore"
...

These are the important points to understand in the preceding example:

The static IP addresses for the worker nodes are specified in an IP block file. The IP block file has seven addresses even though there are only six worker nodes. The extra IP address is needed during cluster upgrade, update, and auto repair.
The static IP addresses for the three control-plane nodes are specified in the network.controlPlaneIPBlock section of the user cluster configuration file. There is no need for an extra IP address in this block.
The masterNode.replicas field is set to 3, so there will be three control-plane nodes. Under masterNode, nothing is specified for vsphere.datastore or vsphere.storagePolicyName. So the control-plane nodes will use the storage policy specified in vCenter.storagePolicyName.
The user cluster configuration file includes a value for vCenter.storagePolicy, but it does not include a value for vCenter.datastore. The specified storage policy will be used by nodes in any pool that does not specify its own storage policy or its own datastore.
Under node-pool-1, nothing is specified for vsphere.datastore or vsphere.storagePolicyName. So the nodes in node-pool-1 will use the storage policy specified in vCenter.storagePolicyName.
Under node-pool-2, the value of vsphere.datastore is my-np2-datastore, so the nodes in node-pool-2 will use that one datastore, and will not use a storage policy.

Continue creating your user cluster as described in Create a user cluster (Controlplane V2).

Create a user cluster in a separate data center from your admin cluster

A user cluster can be in a separate data center from the admin cluster. The two data centers can use the same instance of vCenter Server or different instances of vCenter Server.

This section gives an example of how to create a user cluster that uses a separate instance of vCenter Server from the admin cluster. Because the user and admin clusters use separate instances of vCenter Server, they are also in separate data centers.

Start by following the instructions in Create a user cluster (ControlPlane V2).

As you fill in your user cluster configuration file:

Set the value of vCenter.storagePolicyName to the name of an existing storage policy. Do not set a value for vCenter.datastore.
Under vCenter, specify values for address, datacenter, cluster, and resourcePool.
Specify a value for network.vCenter.networkName.
Specify two node pools. For the first node pool, do not specify a datastore, and do not specify a storage policy. For the second node pool, set the value of vsphere.datastore to the name of an existing datastore.

Example cluster configuration file

Here is an example of an IP block file and a portion of a user cluster configuration file.

user-ipblock.yaml

blocks:
  - netmask: 255.255.255.0
    gateway: 172.16.21.1
    ips:
    - ip: 172.16.21.2
    - ip: 172.16.21.3
    - ip: 172.16.21.4
    - ip: 172.16.21.5
    - ip: 172.16.21.6
    - ip: 172.16.21.7
    - ip: 172.16.21.8

user-cluster-yaml

apiVersion: v1
kind: UserCluster
...
vCenter:
  address: "my-vcenter-server-2.my-domain.example"
  datacenter: "my-uc-data-center"
  cluster: "my-uc-vsphere-cluster"
  resourcePool: "my-uc-resource-pool"
  storagePolicyName: "my-storage-policy"
network:
  vCenter:
    networkName: "my-uc-network"
  hostConfig:
    dnsServers:
    - "203.0.113.2"
    - "198.51.100.2"
    ntpServers:
    - "216.239.35.4"
  ipMode:
    type: "static"
    ipBlockFilePath: "user-ipblock.yaml"
  controlPlaneIPBlock:
    netmask: "255.255.255.0"
    gateway: "172.16.21.1"
    ips:
    - ip: "172.16.21.9"
      hostname: "cp-vm-1"
    - ip: "172.16.21.10"
      hostname: "cp-vm-2"
    - ip: "172.16.21.11"
      hostname: "cp-vm-3"
loadBalancer:
  vips:
    controlPlaneVIP: "172.16.21.40"
    ingressVIP: "172.16.21.30"
  kind: MetalLB
  metalLB:
    addressPools:
    - name: "address-pool-1"
      addresses:
    - "172.16.21.30-172.16.21.39"
...
enableControlplaneV2: true
masterNode:
  cpus: 4
  memoryMB: 8192
  replicas: 3
nodePools:
- name: "worker-pool-1"
  enableLoadBalancer: true
- name: "worker-pool-2"
  vSphere:
    datastore: "my-np2-datastore"
...

These are the important points to understand in the preceding example:

The user cluster configuration file includes a value for vCenter.storagePolicy, but it does not include a value for vCenter.datastore. The specified storage policy will be used by nodes in any node pool that does not specify its own storage policy or its own datastore.
Under vCenter, there are values specified for address, datacenter, cluster, and resourcePool. So the user cluster will use a different vCenter Server, data center, vSphere cluster, and resource pool from the admin cluster.
There is a value specified for network.vCenter.networkName.
The masterNode.replicas field is set to 3, so there will be three control-plane nodes. Under masterNode, nothing is specified for vsphere.datastore or vsphere.storagePolicyName. So the control-plane nodes will use the storage policy specified in vCenter.storagePolicyName.
Under node-pool-1, nothing is specified for vsphere.datastore or vsphere.storagePolicyName. So the nodes in node-pool-1 will use the storage policy specified in vCenter.storagePolicyName.
Under node-pool-2, the value of vsphere.datastore is my-np2-datastore, so the nodes in node-pool-2 will use that one datastore, and will not use a storage policy.

Continue creating your user cluster as described in Create a user cluster (Controlplane V2).