以下是运行 bmctl create cluster
命令时创建的 YAML 文件的示例。如需详细了解此命令以及如何使用它来创建不同类型的集群配置,请参阅以下主题:
集群配置文件
# bmctl configuration variables. Because this section is valid YAML but not a valid Kubernetes # resource, this section can only be included when using bmctl to # create the initial admin/hybrid cluster. Afterwards, when creating user clusters by directly # applying the cluster and node pool resources to the existing cluster, you must remove this # section. gcrKeyPath: <path to GCR service account key> sshPrivateKeyPath: <path to SSH private key, used for node access> gkeConnectAgentServiceAccountKeyPath: <path to Connect agent service account key> gkeConnectRegisterServiceAccountKeyPath: <path to Hub registration service account key> cloudOperationsServiceAccountKeyPath: <path to Cloud Operations service account key> --- apiVersion: v1 kind: Namespace metadata: name: cluster-example --- apiVersion: baremetal.cluster.gke.io/v1 kind: Cluster metadata: name: example namespace: cluster-example spec: # Cluster type. This can be: # 1) admin: to create an admin cluster. This can later be used to create user clusters. # 2) user: to create a user cluster. Requires an existing admin cluster. # 3) hybrid: to create a hybrid cluster that runs admin cluster components and user workloads. # 4) standalone: to create a cluster that manages itself, runs user workloads, but does not manage other clusters. type: admin # Anthos cluster version. anthosBareMetalVersion: 1.6.2 # GKE connect configuration gkeConnect: projectID: <GCP project ID> # Control plane configuration controlPlane: nodePoolSpec: nodes: # Control plane node pools. Typically, this is either a single machine # or 3 machines if using a high availability deployment. - address: <Machine 1 IP> # Cluster networking configuration clusterNetwork: # Pods specify the IP ranges from which pod networks are allocated. pods: cidrBlocks: - 192.168.0.0/16 # Services specify the network ranges from which service VIPs are allocated. # This can be any RFC1918 range that does not conflict with any other IP range # in the cluster and node pool resources. services: cidrBlocks: - 10.96.0.0/12 # Load balancer configuration loadBalancer: # Load balancer mode can be either 'bundled' or 'manual'. # In 'bundled' mode a load balancer will be installed on load balancer nodes during cluster creation. # In 'manual' mode the cluster relies on a manually-configured external load balancer. mode: bundled # Load balancer port configuration ports: # Specifies the port the load balancer serves the Kubernetes control plane on. # In 'manual' mode the external load balancer must be listening on this port. controlPlaneLBPort: 443 # There are two load balancer VIPs: one for the control plane and one for the L7 Ingress # service. The VIPs must be in the same subnet as the load balancer nodes. vips: # ControlPlaneVIP specifies the VIP to connect to the Kubernetes API server. # This address must not be in the address pools below. controlPlaneVIP: 10.0.0.8 # IngressVIP specifies the VIP shared by all services for ingress traffic. # Allowed only in non-admin clusters. # This address must be in the address pools below. # ingressVIP: 10.0.0.2 # AddressPools is a list of non-overlapping IP ranges for the data plane load balancer. # All addresses must be in the same subnet as the load balancer nodes. # Address pool configuration is only valid for 'bundled' LB mode in non-admin clusters. # addressPools: # - name: pool1 # addresses: # # Each address must be either in the CIDR form (1.2.3.0/24) # # or range form (1.2.3.1-1.2.3.5). # - 10.0.0.1-10.0.0.4 # A load balancer node pool can be configured to specify nodes used for load balancing. # These nodes are part of the Kubernetes cluster and run regular workloads as well as load balancers. # If the node pool config is absent then the control plane nodes are used. # Node pool configuration is only valid for 'bundled' load balancer mode. # nodePoolSpec: # nodes: # - address: <Machine 1 IP> # Proxy configuration # proxy: # url: http://[username:password@]domain # # A list of IPs, hostnames or domains that should not be proxied. # noProxy: # - 127.0.0.1 # - localhost # Logging and Monitoring clusterOperations: # Cloud project for logs and metrics. projectID: <GCP project ID> # Cloud location for logs and metrics. location: us-central1 # Whether collection of application logs/metrics should be enabled (in addition to # collection of system logs/metrics which correspond to system components such as # Kubernetes control plane or cluster management agents). # enableApplication: false # Storage configuration storage: # lvpNodeMounts specifies the config for local PersistentVolumes backed by mounted disks. # These disks need to be formatted and mounted by the user, which can be done before or after # cluster creation. lvpNodeMounts: # path specifies the host machine path where mounted disks will be discovered and a local PV # will be created for each mount. path: /mnt/localpv-disk # storageClassName specifies the StorageClass that PVs will be created with. The StorageClass # is created during cluster creation. storageClassName: local-disks # lvpShare specifies the config for local PersistentVolumes backed by subdirectories in a shared filesystem. # These subdirectories are automatically created during cluster creation. lvpShare: # path specifies the host machine path where subdirectories will be created on each host. A local PV # will be created for each subdirectory. path: /mnt/localpv-share # storageClassName specifies the StorageClass that PVs will be created with. The StorageClass # is created during cluster creation. storageClassName: local-shared # numPVUnderSharedPath specifies the number of subdirectories to create under path. numPVUnderSharedPath: 5 # Authentication; uncomment this section if you wish to enable authentication to the cluster with OpenID Connect. # authentication: # oidc: # # issuerURL specifies the URL of your OpenID provider, such as "https://accounts.google.com". The Kubernetes API # # server uses this URL to discover public keys for verifying tokens. Must use HTTPS. # issuerURL: <URL for OIDC Provider; required> # # clientID specifies the ID for the client application that makes authentication requests to the OpenID # # provider. # clientID: <ID for OIDC client application; required> # # clientSecret specifies the secret for the client application. # clientSecret: <Secret for OIDC client application; optional> # # kubectlRedirectURL specifies the redirect URL (required) for the gcloud CLI, such as # # "http://localhost:[PORT]/callback". # kubectlRedirectURL: <Redirect URL for the gcloud CLI; optional, default is "http://kubectl.redirect.invalid"> # # username specifies the JWT claim to use as the username. The default is "sub", which is expected to be a # # unique identifier of the end user. # username: <JWT claim to use as the username; optional, default is "sub"> # # usernamePrefix specifies the prefix prepended to username claims to prevent clashes with existing names. # usernamePrefix: <Prefix prepended to username claims; optional> # # group specifies the JWT claim that the provider will use to return your security groups. # group: <JWT claim to use as the group name; optional> # # groupPrefix specifies the prefix prepended to group claims to prevent clashes with existing names. # groupPrefix: <Prefix prepended to group claims; optional> # # scopes specifies additional scopes to send to the OpenID provider as a comma-delimited list. # scopes: <Additional scopes to send to OIDC provider as a comma-separated list; optional> # # extraParams specifies additional key-value parameters to send to the OpenID provider as a comma-delimited # # list. # extraParams: <Additional key-value parameters to send to OIDC provider as a comma-separated list; optional> # # certificateAuthorityData specifies a Base64 PEM-encoded certificate authority certificate of your identity # # provider. It's not needed if your identity provider's certificate was issued by a well-known public CA. # certificateAuthorityData: <Base64 PEM-encoded certificate authority certificate of your OIDC provider; optional> # Node access configuration; uncomment this section if you wish to use a non-root user # with passwordless sudo capability for machine login. # nodeAccess: # loginUser: <login user name> --- # Node pools for worker nodes apiVersion: baremetal.cluster.gke.io/v1 kind: NodePool metadata: name: node-pool-1 namespace: cluster-example spec: clusterName: example nodes: - address: <Machine 2 IP> - address: <Machine 3 IP>