生成视频帧的精灵表

本页面介绍了如何从您转码的视频生成包含帧的精灵表。这些缩小的帧（也称为缩略图）有助于整理和预览内容。要生成精灵表，请在 JobConfig 模板中使用 spriteSheets 数组。

您可以通过以下两种方式生成精灵表：

• 生成一组缩略图，这些缩略图在整个输入视频时间轴中均匀分布。
• 定期生成缩略图，即在输入视频时间轴上每 n 秒生成一张缩略图。

生成一定数量的缩略图

以下配置生成一个 10x10 的大图片精灵表和一个 10x10 的小图片精灵表，每个精灵表有 100 张缩略图。请注意，精灵图集需要在作业配置中至少包含一个 VideoStream。

您可以将此配置添加到作业模板中，也可以将其添加到临时作业配置中。

REST

在使用任何请求数据之前，请先进行以下替换：

• PROJECT_ID：IAM 设置中列出的 Google Cloud 项目 ID。
• LOCATION：运行作业的位置。请使用其中一个受支持的区域。
  显示位置
  • us-central1
  • us-west1
  • us-west2
  • us-east1
  • us-east4
  • southamerica-east1
  • northamerica-northeast1
  • asia-east1
  • asia-northeast1
  • asia-northeast3
  • asia-south1
  • asia-southeast1
  • australia-southeast1
  • europe-west1
  • europe-west2
  • europe-west4
• STORAGE_BUCKET_NAME：您创建的 Cloud Storage 存储分区的名称。
• STORAGE_INPUT_VIDEO：您要对其进行转码的 Cloud Storage 存储分区中的视频的名称，例如 my-vid.mp4。此字段应考虑您在存储分区中创建的任何文件夹（例如 input/my-vid.mp4）。
• STORAGE_OUTPUT_FOLDER：您要在其中保存已编码视频输出的 Cloud Storage 文件夹名称。
  注意：您无需在创建作业之前创建输出文件夹对象。处理作业时，Transcoder API 会自动前置您指定的文件夹名称，作为保存到 Cloud Storage 的对象名称的一部分。

如需发送您的请求，请展开以下选项之一：

curl（Linux、macOS 或 Cloud Shell）

注意：以下命令假定您已使用您的用户账号通过运行 gcloud init 或 gcloud auth login 登录 gcloud CLI，或者使用了 Cloud Shell，这会使您自动登录 gcloud CLI。您可以运行 gcloud auth list 来检查当前活跃的账号。

将请求正文保存在名为 request.json 的文件中。在终端中运行以下命令，在当前目录中创建或覆盖此文件：

cat > request.json << 'EOF'
{
  "config": {
    "inputs": [
          {
            "key": "input0",
            "uri": "gs://STORAGE_BUCKET_NAME/STORAGE_INPUT_VIDEO"
          }
    ],
    "elementaryStreams": [
      {
        "key": "video-stream0",
        "videoStream": {
          "h264": {
            "heightPixels": 360,
            "widthPixels": 640,
            "bitrateBps": 550000,
            "frameRate": 60
          }
        }
      },
      {
        "key": "audio-stream0",
        "audioStream": {
          "codec": "aac",
          "bitrateBps": 64000
        }
      }
    ],
    "muxStreams": [
      {
        "key": "sd",
        "container": "mp4",
        "elementaryStreams": [
          "video-stream0",
          "audio-stream0"
        ]
      }
    ],
    "output": {
      "uri": "gs://STORAGE_BUCKET_NAME/STORAGE_OUTPUT_FOLDER/"
    },
    "spriteSheets": [
      {
        "filePrefix": "small-sprite-sheet",
        "spriteHeightPixels": 32,
        "spriteWidthPixels": 64,
        "columnCount": 10,
        "rowCount": 10,
        "totalCount": 100
      },
      {
        "filePrefix": "large-sprite-sheet",
        "spriteHeightPixels": 72,
        "spriteWidthPixels": 128,
        "columnCount": 10,
        "rowCount": 10,
        "totalCount": 100
      }
    ]
  }
}
EOF

然后，执行以下命令以发送 REST 请求：

curl -X POST \
     -H "Authorization: Bearer $(gcloud auth print-access-token)" \
     -H "Content-Type: application/json; charset=utf-8" \
     -d @request.json \
     "https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobs"

PowerShell (Windows)

注意：以下命令假定您已使用您的用户账号通过运行 gcloud init 或 gcloud auth login 登录 gcloud CLI。您可以运行 gcloud auth list 来检查当前活跃的账号。

将请求正文保存在名为 request.json 的文件中。在终端中运行以下命令，在当前目录中创建或覆盖此文件：

@'
{
  "config": {
    "inputs": [
          {
            "key": "input0",
            "uri": "gs://STORAGE_BUCKET_NAME/STORAGE_INPUT_VIDEO"
          }
    ],
    "elementaryStreams": [
      {
        "key": "video-stream0",
        "videoStream": {
          "h264": {
            "heightPixels": 360,
            "widthPixels": 640,
            "bitrateBps": 550000,
            "frameRate": 60
          }
        }
      },
      {
        "key": "audio-stream0",
        "audioStream": {
          "codec": "aac",
          "bitrateBps": 64000
        }
      }
    ],
    "muxStreams": [
      {
        "key": "sd",
        "container": "mp4",
        "elementaryStreams": [
          "video-stream0",
          "audio-stream0"
        ]
      }
    ],
    "output": {
      "uri": "gs://STORAGE_BUCKET_NAME/STORAGE_OUTPUT_FOLDER/"
    },
    "spriteSheets": [
      {
        "filePrefix": "small-sprite-sheet",
        "spriteHeightPixels": 32,
        "spriteWidthPixels": 64,
        "columnCount": 10,
        "rowCount": 10,
        "totalCount": 100
      },
      {
        "filePrefix": "large-sprite-sheet",
        "spriteHeightPixels": 72,
        "spriteWidthPixels": 128,
        "columnCount": 10,
        "rowCount": 10,
        "totalCount": 100
      }
    ]
  }
}
'@  | Out-File -FilePath request.json -Encoding utf8

然后，执行以下命令以发送 REST 请求：

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobs" | Select-Object -Expand Content

您应该收到类似以下内容的 JSON 响应：

{
  "name": "projects/PROJECT_NUMBER/locations/LOCATION/jobs/JOB_ID",
  "config": {
   ...
  },
  "state": "PENDING",
  "createTime": CREATE_TIME,
  "ttlAfterCompletionDays": 30
}

gcloud

1. 创建一个定义作业字段的 request.json 文件。 对 gcloud 命令进行以下替换：
   • STORAGE_BUCKET_NAME：您创建的 Cloud Storage 存储分区的名称。
   • STORAGE_INPUT_VIDEO：您要对其进行转码的 Cloud Storage 存储分区中的视频的名称，例如 my-vid.mp4。此字段应考虑您在存储分区中创建的任何文件夹（例如 input/my-vid.mp4）。
   • LOCATION：运行作业的位置。请使用以下列表中的某个位置。
     显示位置
     • us-central1
     • us-west1
     • us-west2
     • us-east1
     • us-east4
     • southamerica-east1
     • northamerica-northeast1
     • asia-east1
     • asia-northeast1
     • asia-northeast3
     • asia-south1
     • asia-southeast1
     • australia-southeast1
     • europe-west1
     • europe-west2
     • europe-west4
   • STORAGE_OUTPUT_FOLDER：您要在其中保存已编码视频输出的 Cloud Storage 文件夹名称。
     注意：您无需在创建作业之前创建输出文件夹对象。处理作业时，Transcoder API 会自动前置您指定的文件夹名称，作为保存到 Cloud Storage 的对象名称的一部分。

   {
     "config": {
       "inputs": [
             {
               "key": "input0",
               "uri": "gs://STORAGE_BUCKET_NAME/STORAGE_INPUT_VIDEO"
             }
       ],
       "elementaryStreams": [
         {
           "key": "video-stream0",
           "videoStream": {
             "h264": {
               "heightPixels": 360,
               "widthPixels": 640,
               "bitrateBps": 550000,
               "frameRate": 60
             }
           }
         },
         {
           "key": "audio-stream0",
           "audioStream": {
             "codec": "aac",
             "bitrateBps": 64000
           }
         }
       ],
       "muxStreams": [
         {
           "key": "sd",
           "container": "mp4",
           "elementaryStreams": [
             "video-stream0",
             "audio-stream0"
           ]
         }
       ],
       "output": {
         "uri": "gs://STORAGE_BUCKET_NAME/STORAGE_OUTPUT_FOLDER/"
       },
       "spriteSheets": [
         {
           "filePrefix": "small-sprite-sheet",
           "spriteHeightPixels": 32,
           "spriteWidthPixels": 64,
           "columnCount": 10,
           "rowCount": 10,
           "totalCount": 100
         },
         {
           "filePrefix": "large-sprite-sheet",
           "spriteHeightPixels": 72,
           "spriteWidthPixels": 128,
           "columnCount": 10,
           "rowCount": 10,
           "totalCount": 100
         }
       ]
     }
   }

2. 运行以下命令：

   gcloud transcoder jobs create --location=LOCATION --file="request.json"

   您应该会看到如下所示的响应：

   {
     "name": "projects/PROJECT_NUMBER/locations/LOCATION/jobs/JOB_ID",
     "config": {
      ...
     },
     "state": "PENDING",
     "createTime": CREATE_TIME,
     "ttlAfterCompletionDays": 30
   }
   

C#

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 C# 设置说明进行操作。 如需了解详情，请参阅 Transcoder API C# API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

using Google.Api.Gax.ResourceNames;
using Google.Cloud.Video.Transcoder.V1;

public class CreateJobWithSetNumberImagesSpritesheetSample
{
    public const string SmallSpritesheetFilePrefix = "small-sprite-sheet";
    public const string LargeSpritesheetFilePrefix = "large-sprite-sheet";
    public Job CreateJobWithSetNumberImagesSpritesheet(
        string projectId, string location, string inputUri, string outputUri)
    {
        // Create the client.
        TranscoderServiceClient client = TranscoderServiceClient.Create();

        // Build the parent location name.
        LocationName parent = new LocationName(projectId, location);

        // Build the job config.
        VideoStream videoStream0 = new VideoStream
        {
            H264 = new VideoStream.Types.H264CodecSettings
            {
                BitrateBps = 550000,
                FrameRate = 60,
                HeightPixels = 360,
                WidthPixels = 640
            }
        };

        AudioStream audioStream0 = new AudioStream
        {
            Codec = "aac",
            BitrateBps = 64000
        };

        // Generates a 10x10 spritesheet of small images from the input video.
        // To preserve the source aspect ratio, you should set the
        // SpriteWidthPixels field or the SpriteHeightPixels field, but not
        // both (the API will automatically calculate the missing field). For
        // this sample, we don't care about the aspect ratio so we set both
        // fields.
        SpriteSheet smallSpriteSheet = new SpriteSheet
        {
            FilePrefix = SmallSpritesheetFilePrefix,
            SpriteHeightPixels = 32,
            SpriteWidthPixels = 64,
            ColumnCount = 10,
            RowCount = 10,
            TotalCount = 100
        };

        // Generates a 10x10 spritesheet of larger images from the input video.
        // input video. To preserve the source aspect ratio, you should set the
        // SpriteWidthPixels field or the SpriteHeightPixels field, but not
        // both (the API will automatically calculate the missing field). For
        // this sample, we don't care about the aspect ratio so we set both
        // fields.
        SpriteSheet largeSpriteSheet = new SpriteSheet
        {
            FilePrefix = LargeSpritesheetFilePrefix,
            SpriteHeightPixels = 72,
            SpriteWidthPixels = 128,
            ColumnCount = 10,
            RowCount = 10,
            TotalCount = 100
        };

        ElementaryStream elementaryStream0 = new ElementaryStream
        {
            Key = "video_stream0",
            VideoStream = videoStream0
        };

        ElementaryStream elementaryStream1 = new ElementaryStream
        {
            Key = "audio_stream0",
            AudioStream = audioStream0
        };

        MuxStream muxStream0 = new MuxStream
        {
            Key = "sd",
            Container = "mp4",
            ElementaryStreams = { "video_stream0", "audio_stream0" }
        };

        Input input = new Input
        {
            Key = "input0",
            Uri = inputUri
        };

        Output output = new Output
        {
            Uri = outputUri
        };

        JobConfig jobConfig = new JobConfig
        {
            Inputs = { input },
            Output = output,
            ElementaryStreams = { elementaryStream0, elementaryStream1 },
            MuxStreams = { muxStream0 },
            SpriteSheets = { smallSpriteSheet, largeSpriteSheet }
        };

        // Build the job.
        Job newJob = new Job();
        newJob.InputUri = inputUri;
        newJob.OutputUri = outputUri;
        newJob.Config = jobConfig;

        // Call the API.
        Job job = client.CreateJob(parent, newJob);

        // Return the result.
        return job;
    }
}

Go

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 Go 设置说明进行操作。 如需了解详情，请参阅 Transcoder API Go API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

import (
	"context"
	"fmt"
	"io"

	transcoder "cloud.google.com/go/video/transcoder/apiv1"
	"cloud.google.com/go/video/transcoder/apiv1/transcoderpb"
)

// createJobWithSetNumberImagesSpritesheet creates a job from an ad-hoc configuration and generates
// two spritesheets from the input video. Each spritesheet contains a set number of images.
func createJobWithSetNumberImagesSpritesheet(w io.Writer, projectID string, location string, inputURI string, outputURI string) error {
	// projectID := "my-project-id"
	// location := "us-central1"
	// inputURI := "gs://my-bucket/my-video-file"
	// outputURI := "gs://my-bucket/my-output-folder/"
	ctx := context.Background()
	client, err := transcoder.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("NewClient: %w", err)
	}
	defer client.Close()

	req := &transcoderpb.CreateJobRequest{
		Parent: fmt.Sprintf("projects/%s/locations/%s", projectID, location),
		Job: &transcoderpb.Job{
			InputUri:  inputURI,
			OutputUri: outputURI,
			JobConfig: &transcoderpb.Job_Config{
				Config: &transcoderpb.JobConfig{
					ElementaryStreams: []*transcoderpb.ElementaryStream{
						{
							Key: "video_stream0",
							ElementaryStream: &transcoderpb.ElementaryStream_VideoStream{
								VideoStream: &transcoderpb.VideoStream{
									CodecSettings: &transcoderpb.VideoStream_H264{
										H264: &transcoderpb.VideoStream_H264CodecSettings{
											BitrateBps:   550000,
											FrameRate:    60,
											HeightPixels: 360,
											WidthPixels:  640,
										},
									},
								},
							},
						},
						{
							Key: "audio_stream0",
							ElementaryStream: &transcoderpb.ElementaryStream_AudioStream{
								AudioStream: &transcoderpb.AudioStream{
									Codec:      "aac",
									BitrateBps: 64000,
								},
							},
						},
					},
					MuxStreams: []*transcoderpb.MuxStream{
						{
							Key:               "sd",
							Container:         "mp4",
							ElementaryStreams: []string{"video_stream0", "audio_stream0"},
						},
					},
					SpriteSheets: []*transcoderpb.SpriteSheet{
						{
							FilePrefix:         "small-sprite-sheet",
							SpriteWidthPixels:  64,
							SpriteHeightPixels: 32,
							ColumnCount:        10,
							RowCount:           10,
							ExtractionStrategy: &transcoderpb.SpriteSheet_TotalCount{
								TotalCount: 100,
							},
						},
						{
							FilePrefix:         "large-sprite-sheet",
							SpriteWidthPixels:  128,
							SpriteHeightPixels: 72,
							ColumnCount:        10,
							RowCount:           10,
							ExtractionStrategy: &transcoderpb.SpriteSheet_TotalCount{
								TotalCount: 100,
							},
						},
					},
				},
			},
		},
	}
	// Creates the job. Jobs take a variable amount of time to run. You can query for the job state.
	// See https://cloud.google.com/transcoder/docs/how-to/jobs#check_job_status for more info.
	response, err := client.CreateJob(ctx, req)
	if err != nil {
		return fmt.Errorf("createJobWithSetNumberImagesSpritesheet: %w", err)
	}

	fmt.Fprintf(w, "Job: %v", response.GetName())
	return nil
}

Java

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 Java 设置说明进行操作。 如需了解详情，请参阅 Transcoder API Java API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

import com.google.cloud.video.transcoder.v1.AudioStream;
import com.google.cloud.video.transcoder.v1.CreateJobRequest;
import com.google.cloud.video.transcoder.v1.ElementaryStream;
import com.google.cloud.video.transcoder.v1.Input;
import com.google.cloud.video.transcoder.v1.Job;
import com.google.cloud.video.transcoder.v1.JobConfig;
import com.google.cloud.video.transcoder.v1.LocationName;
import com.google.cloud.video.transcoder.v1.MuxStream;
import com.google.cloud.video.transcoder.v1.Output;
import com.google.cloud.video.transcoder.v1.SpriteSheet;
import com.google.cloud.video.transcoder.v1.TranscoderServiceClient;
import com.google.cloud.video.transcoder.v1.VideoStream;
import java.io.IOException;

public class CreateJobWithSetNumberImagesSpritesheet {

  public static final String smallSpritesheetFilePrefix = "small-sprite-sheet";
  public static final String largeSpritesheetFilePrefix = "large-sprite-sheet";
  public static final String spritesheetFileSuffix = "0000000000.jpeg";

  public static void main(String[] args) throws IOException {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "my-project-id";
    String location = "us-central1";
    String inputUri = "gs://my-bucket/my-video-file";
    String outputUri = "gs://my-bucket/my-output-folder/";

    createJobWithSetNumberImagesSpritesheet(projectId, location, inputUri, outputUri);
  }

  // Creates a job from an ad-hoc configuration and generates two spritesheets from the input video.
  // Each spritesheet contains a set number of images.
  public static void createJobWithSetNumberImagesSpritesheet(
      String projectId, String location, String inputUri, String outputUri) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests.
    try (TranscoderServiceClient transcoderServiceClient = TranscoderServiceClient.create()) {

      VideoStream videoStream0 =
          VideoStream.newBuilder()
              .setH264(
                  VideoStream.H264CodecSettings.newBuilder()
                      .setBitrateBps(550000)
                      .setFrameRate(60)
                      .setHeightPixels(360)
                      .setWidthPixels(640))
              .build();

      AudioStream audioStream0 =
          AudioStream.newBuilder().setCodec("aac").setBitrateBps(64000).build();

      // Generates a 10x10 spritesheet of small images from the input video. To preserve the source
      // aspect ratio, you should set the spriteWidthPixels field or the spriteHeightPixels
      // field, but not both.
      SpriteSheet smallSpriteSheet =
          SpriteSheet.newBuilder()
              .setFilePrefix(smallSpritesheetFilePrefix)
              .setSpriteHeightPixels(32)
              .setSpriteWidthPixels(64)
              .setColumnCount(10)
              .setRowCount(10)
              .setTotalCount(100)
              .build();

      // Generates a 10x10 spritesheet of larger images from the input video.
      SpriteSheet largeSpriteSheet =
          SpriteSheet.newBuilder()
              .setFilePrefix(largeSpritesheetFilePrefix)
              .setSpriteHeightPixels(72)
              .setSpriteWidthPixels(128)
              .setColumnCount(10)
              .setRowCount(10)
              .setTotalCount(100)
              .build();

      JobConfig config =
          JobConfig.newBuilder()
              .addInputs(Input.newBuilder().setKey("input0").setUri(inputUri))
              .setOutput(Output.newBuilder().setUri(outputUri))
              .addElementaryStreams(
                  ElementaryStream.newBuilder()
                      .setKey("video_stream0")
                      .setVideoStream(videoStream0))
              .addElementaryStreams(
                  ElementaryStream.newBuilder()
                      .setKey("audio_stream0")
                      .setAudioStream(audioStream0))
              .addMuxStreams(
                  MuxStream.newBuilder()
                      .setKey("sd")
                      .setContainer("mp4")
                      .addElementaryStreams("video_stream0")
                      .addElementaryStreams("audio_stream0")
                      .build())
              .addSpriteSheets(smallSpriteSheet) // Add the spritesheet config to the job config
              .addSpriteSheets(largeSpriteSheet) // Add the spritesheet config to the job config
              .build();

      CreateJobRequest createJobRequest =
          CreateJobRequest.newBuilder()
              .setJob(
                  Job.newBuilder()
                      .setInputUri(inputUri)
                      .setOutputUri(outputUri)
                      .setConfig(config)
                      .build())
              .setParent(LocationName.of(projectId, location).toString())
              .build();

      // Send the job creation request and process the response.
      Job job = transcoderServiceClient.createJob(createJobRequest);
      System.out.println("Job: " + job.getName());
    }
  }
}

Node.js

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 Node.js 设置说明进行操作。 如需了解详情，请参阅 Transcoder API Node.js API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// projectId = 'my-project-id';
// location = 'us-central1';
// inputUri = 'gs://my-bucket/my-video-file';
// outputUri = 'gs://my-bucket/my-output-folder/';

// Imports the Transcoder library
const {TranscoderServiceClient} =
  require('@google-cloud/video-transcoder').v1;

// Instantiates a client
const transcoderServiceClient = new TranscoderServiceClient();

async function createJobWithSetNumberImagesSpritesheet() {
  // Construct request
  const request = {
    parent: transcoderServiceClient.locationPath(projectId, location),
    job: {
      inputUri: inputUri,
      outputUri: outputUri,
      config: {
        elementaryStreams: [
          {
            key: 'video-stream0',
            videoStream: {
              h264: {
                heightPixels: 360,
                widthPixels: 640,
                bitrateBps: 550000,
                frameRate: 60,
              },
            },
          },
          {
            key: 'audio-stream0',
            audioStream: {
              codec: 'aac',
              bitrateBps: 64000,
            },
          },
        ],
        muxStreams: [
          {
            key: 'sd',
            container: 'mp4',
            elementaryStreams: ['video-stream0', 'audio-stream0'],
          },
        ],
        spriteSheets: [
          {
            filePrefix: 'small-sprite-sheet',
            spriteHeightPixels: 32,
            spriteWidthPixels: 64,
            columnCount: 10,
            rowCount: 10,
            totalCount: 100,
          },
          {
            filePrefix: 'large-sprite-sheet',
            spriteHeightPixels: 72,
            spriteWidthPixels: 128,
            columnCount: 10,
            rowCount: 10,
            totalCount: 100,
          },
        ],
      },
    },
  };

  // Run request
  const [response] = await transcoderServiceClient.createJob(request);
  console.log(`Job: ${response.name}`);
}

createJobWithSetNumberImagesSpritesheet();

PHP

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 PHP 设置说明进行操作。 如需了解详情，请参阅 Transcoder API PHP API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

use Google\Cloud\Video\Transcoder\V1\AudioStream;
use Google\Cloud\Video\Transcoder\V1\Client\TranscoderServiceClient;
use Google\Cloud\Video\Transcoder\V1\CreateJobRequest;
use Google\Cloud\Video\Transcoder\V1\ElementaryStream;
use Google\Cloud\Video\Transcoder\V1\Job;
use Google\Cloud\Video\Transcoder\V1\JobConfig;
use Google\Cloud\Video\Transcoder\V1\MuxStream;
use Google\Cloud\Video\Transcoder\V1\SpriteSheet;
use Google\Cloud\Video\Transcoder\V1\VideoStream;

/**
 * Creates a job that generates two spritesheets from the input video. Each
 * spritesheet contains a set number of images.
 *
 * @param string $projectId The ID of your Google Cloud Platform project.
 * @param string $location The location of the job.
 * @param string $inputUri Uri of the video in the Cloud Storage bucket.
 * @param string $outputUri Uri of the video output folder in the Cloud Storage bucket.
 */
function create_job_with_set_number_images_spritesheet($projectId, $location, $inputUri, $outputUri)
{
    // Instantiate a client.
    $transcoderServiceClient = new TranscoderServiceClient();

    $formattedParent = $transcoderServiceClient->locationName($projectId, $location);
    $jobConfig =
        (new JobConfig())->setElementaryStreams([
            (new ElementaryStream())
                ->setKey('video-stream0')
                ->setVideoStream(
                    (new VideoStream())
                        ->setH264(
                            (new VideoStream\H264CodecSettings())
                                ->setBitrateBps(550000)
                                ->setFrameRate(60)
                                ->setHeightPixels(360)
                                ->setWidthPixels(640)
                        )
                ),
            (new ElementaryStream())
                ->setKey('audio-stream0')
                ->setAudioStream(
                    (new AudioStream())
                        ->setCodec('aac')
                        ->setBitrateBps(64000)
                )
        ])->setMuxStreams([
            (new MuxStream())
                ->setKey('sd')
                ->setContainer('mp4')
                ->setElementaryStreams(['video-stream0', 'audio-stream0'])
        ])->setSpriteSheets([
            (new SpriteSheet())
                ->setFilePrefix('small-sprite-sheet')
                ->setSpriteWidthPixels(64)
                ->setSpriteHeightPixels(32)
                ->setColumnCount(10)
                ->setRowCount(10)
                ->setTotalCount(100),
            (new SpriteSheet())
                ->setFilePrefix('large-sprite-sheet')
                ->setSpriteWidthPixels(128)
                ->setSpriteHeightPixels(72)
                ->setColumnCount(10)
                ->setRowCount(10)
                ->setTotalCount(100)
        ]);

    $job = (new Job())
        ->setInputUri($inputUri)
        ->setOutputUri($outputUri)
        ->setConfig($jobConfig);
    $request = (new CreateJobRequest())
        ->setParent($formattedParent)
        ->setJob($job);

    $response = $transcoderServiceClient->createJob($request);

    // Print job name.
    printf('Job: %s' . PHP_EOL, $response->getName());
}

Python

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 Python 设置说明进行操作。 如需了解详情，请参阅 Transcoder API Python API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

import argparse

from google.cloud.video import transcoder_v1
from google.cloud.video.transcoder_v1.services.transcoder_service import (
    TranscoderServiceClient,
)


def create_job_with_set_number_images_spritesheet(
    project_id: str,
    location: str,
    input_uri: str,
    output_uri: str,
) -> transcoder_v1.types.resources.Job:
    """Creates a job based on an ad-hoc job configuration that generates two spritesheets.

    Args:
        project_id: The GCP project ID.
        location: The location to start the job in.
        input_uri: Uri of the video in the Cloud Storage bucket.
        output_uri: Uri of the video output folder in the Cloud Storage bucket.

    Returns:
        The job resource.
    """

    client = TranscoderServiceClient()

    parent = f"projects/{project_id}/locations/{location}"
    job = transcoder_v1.types.Job()
    job.input_uri = input_uri
    job.output_uri = output_uri
    job.config = transcoder_v1.types.JobConfig(
        # Create an ad-hoc job. For more information, see https://cloud.google.com/transcoder/docs/how-to/jobs#create_jobs_ad_hoc.
        # See all options for the job config at https://cloud.google.com/transcoder/docs/reference/rest/v1/JobConfig.
        elementary_streams=[
            # This section defines the output video stream.
            transcoder_v1.types.ElementaryStream(
                key="video-stream0",
                video_stream=transcoder_v1.types.VideoStream(
                    h264=transcoder_v1.types.VideoStream.H264CodecSettings(
                        height_pixels=360,
                        width_pixels=640,
                        bitrate_bps=550000,
                        frame_rate=60,
                    ),
                ),
            ),
            # This section defines the output audio stream.
            transcoder_v1.types.ElementaryStream(
                key="audio-stream0",
                audio_stream=transcoder_v1.types.AudioStream(
                    codec="aac", bitrate_bps=64000
                ),
            ),
        ],
        # This section multiplexes the output audio and video together into a container.
        mux_streams=[
            transcoder_v1.types.MuxStream(
                key="sd",
                container="mp4",
                elementary_streams=["video-stream0", "audio-stream0"],
            ),
        ],
        # Generate two sprite sheets from the input video into the GCS bucket. For more information, see
        # https://cloud.google.com/transcoder/docs/how-to/generate-spritesheet#generate_set_number_of_images.
        sprite_sheets=[
            # Generate a 10x10 sprite sheet with 64x32px images.
            transcoder_v1.types.SpriteSheet(
                file_prefix="small-sprite-sheet",
                sprite_width_pixels=64,
                sprite_height_pixels=32,
                column_count=10,
                row_count=10,
                total_count=100,
            ),
            # Generate a 10x10 sprite sheet with 128x72px images.
            transcoder_v1.types.SpriteSheet(
                file_prefix="large-sprite-sheet",
                sprite_width_pixels=128,
                sprite_height_pixels=72,
                column_count=10,
                row_count=10,
                total_count=100,
            ),
        ],
    )
    response = client.create_job(parent=parent, job=job)
    print(f"Job: {response.name}")
    return response

Ruby

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 Ruby 设置说明进行操作。 如需了解详情，请参阅 Transcoder API Ruby API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

# project_id  = "YOUR-GOOGLE-CLOUD-PROJECT"  # (e.g. "my-project")
# location    = "YOUR-JOB-LOCATION"  # (e.g. "us-central1")
# input_uri   = "YOUR-GCS-INPUT-VIDEO"  # (e.g. "gs://my-bucket/my-video-file")
# output_uri  = "YOUR-GCS-OUTPUT-FOLDER/"  # (e.g. "gs://my-bucket/my-output-folder/")

# Require the Transcoder client library.
require "google/cloud/video/transcoder"

# Create a Transcoder client.
client = Google::Cloud::Video::Transcoder.transcoder_service

# Build the resource name of the parent.
parent = client.location_path project: project_id, location: location

# Build the job config.
new_job = {
  input_uri: input_uri,
  output_uri: output_uri,
  config: {
    elementary_streams: [
      {
        key: "video-stream0",
        video_stream: {
          h264: {
            height_pixels: 360,
            width_pixels: 640,
            bitrate_bps: 550_000,
            frame_rate: 60
          }
        }
      },
      {
        key: "audio-stream0",
        audio_stream: {
          codec: "aac",
          bitrate_bps: 64_000
        }
      }
    ],
    mux_streams: [
      {
        key: "sd",
        container: "mp4",
        elementary_streams: [
          "video-stream0",
          "audio-stream0"
        ]
      }
    ],
    sprite_sheets: [
      {
        file_prefix: "small-sprite-sheet",
        sprite_width_pixels: 64,
        sprite_height_pixels: 32,
        column_count: 10,
        row_count: 10,
        total_count: 100
      },
      {
        file_prefix: "large-sprite-sheet",
        sprite_width_pixels: 128,
        sprite_height_pixels: 72,
        column_count: 10,
        row_count: 10,
        total_count: 100
      }
    ]
  }
}

job = client.create_job parent: parent, job: new_job

# Print the job name.
puts "Job: #{job.name}"

注意：如需保留源宽高比，请设置 spriteWidthPixels 字段或 spriteHeightPixels 字段，但不能同时设置这两者（API 会自动计算缺失的字段）。

对示例视频使用此配置，以便生成以下精灵表：

图 1.小图片精灵表（100 张缩略图）

图 2.大图片精灵表（100 张缩略图）

定期生成缩略图

以下配置生成一个小图片精灵表和一个大图片精灵表。每个精灵图表都包含每 7 秒从输入视频生成的缩略图。请注意，精灵图集需要作业配置中至少包含一个 VideoStream。

您可以将此配置添加到作业模板中，也可以将其添加到临时作业配置中。

REST

在使用任何请求数据之前，请先进行以下替换：

• PROJECT_ID：IAM 设置中列出的 Google Cloud 项目 ID。
• LOCATION：运行作业的位置。请使用其中一个受支持的区域。
  显示位置
  • us-central1
  • us-west1
  • us-west2
  • us-east1
  • us-east4
  • southamerica-east1
  • northamerica-northeast1
  • asia-east1
  • asia-northeast1
  • asia-northeast3
  • asia-south1
  • asia-southeast1
  • australia-southeast1
  • europe-west1
  • europe-west2
  • europe-west4
• STORAGE_BUCKET_NAME：您创建的 Cloud Storage 存储分区的名称。
• STORAGE_INPUT_VIDEO：您要对其进行转码的 Cloud Storage 存储分区中的视频的名称，例如 my-vid.mp4。此字段应考虑您在存储分区中创建的任何文件夹（例如 input/my-vid.mp4）。
• STORAGE_OUTPUT_FOLDER：您要在其中保存已编码视频输出的 Cloud Storage 文件夹名称。
  注意：您无需在创建作业之前创建输出文件夹对象。处理作业时，Transcoder API 会自动前置您指定的文件夹名称，作为保存到 Cloud Storage 的对象名称的一部分。

如需发送您的请求，请展开以下选项之一：

curl（Linux、macOS 或 Cloud Shell）

注意：以下命令假定您已使用您的用户账号通过运行 gcloud init 或 gcloud auth login 登录 gcloud CLI，或者使用了 Cloud Shell，这会使您自动登录 gcloud CLI。您可以运行 gcloud auth list 来检查当前活跃的账号。

将请求正文保存在名为 request.json 的文件中。在终端中运行以下命令，在当前目录中创建或覆盖此文件：

cat > request.json << 'EOF'
{
  "config": {
    "inputs": [
          {
            "key": "input0",
            "uri": "gs://STORAGE_BUCKET_NAME/STORAGE_INPUT_VIDEO"
          }
    ],
    "elementaryStreams": [
      {
        "key": "video-stream0",
        "videoStream": {
          "h264": {
            "heightPixels": 360,
            "widthPixels": 640,
            "bitrateBps": 550000,
            "frameRate": 60
          }
        }
      },
      {
        "key": "audio-stream0",
        "audioStream": {
          "codec": "aac",
          "bitrateBps": 64000
        }
      }
    ],
    "muxStreams": [
      {
        "key": "sd",
        "container": "mp4",
        "elementaryStreams": [
          "video-stream0",
          "audio-stream0"
        ]
      }
    ],
    "output": {
      "uri": "gs://STORAGE_BUCKET_NAME/STORAGE_OUTPUT_FOLDER/"
    },
    "spriteSheets": [
      {
        "filePrefix": "small-sprite-sheet",
        "spriteHeightPixels": 32,
        "spriteWidthPixels": 64,
        "interval": "7s"
      },
      {
        "filePrefix": "large-sprite-sheet",
        "spriteHeightPixels": 72,
        "spriteWidthPixels": 128,
        "interval": "7s"
      }
    ]
  }
}
EOF

然后，执行以下命令以发送 REST 请求：

curl -X POST \
     -H "Authorization: Bearer $(gcloud auth print-access-token)" \
     -H "Content-Type: application/json; charset=utf-8" \
     -d @request.json \
     "https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobs"

PowerShell (Windows)

注意：以下命令假定您已使用您的用户账号通过运行 gcloud init 或 gcloud auth login 登录 gcloud CLI。您可以运行 gcloud auth list 来检查当前活跃的账号。

将请求正文保存在名为 request.json 的文件中。在终端中运行以下命令，在当前目录中创建或覆盖此文件：

@'
{
  "config": {
    "inputs": [
          {
            "key": "input0",
            "uri": "gs://STORAGE_BUCKET_NAME/STORAGE_INPUT_VIDEO"
          }
    ],
    "elementaryStreams": [
      {
        "key": "video-stream0",
        "videoStream": {
          "h264": {
            "heightPixels": 360,
            "widthPixels": 640,
            "bitrateBps": 550000,
            "frameRate": 60
          }
        }
      },
      {
        "key": "audio-stream0",
        "audioStream": {
          "codec": "aac",
          "bitrateBps": 64000
        }
      }
    ],
    "muxStreams": [
      {
        "key": "sd",
        "container": "mp4",
        "elementaryStreams": [
          "video-stream0",
          "audio-stream0"
        ]
      }
    ],
    "output": {
      "uri": "gs://STORAGE_BUCKET_NAME/STORAGE_OUTPUT_FOLDER/"
    },
    "spriteSheets": [
      {
        "filePrefix": "small-sprite-sheet",
        "spriteHeightPixels": 32,
        "spriteWidthPixels": 64,
        "interval": "7s"
      },
      {
        "filePrefix": "large-sprite-sheet",
        "spriteHeightPixels": 72,
        "spriteWidthPixels": 128,
        "interval": "7s"
      }
    ]
  }
}
'@  | Out-File -FilePath request.json -Encoding utf8

然后，执行以下命令以发送 REST 请求：

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }

Invoke-WebRequest `
    -Method POST `
    -Headers $headers `
    -ContentType: "application/json; charset=utf-8" `
    -InFile request.json `
    -Uri "https://transcoder.googleapis.com/v1/projects/PROJECT_ID/locations/LOCATION/jobs" | Select-Object -Expand Content

您应该收到类似以下内容的 JSON 响应：

{
  "name": "projects/PROJECT_NUMBER/locations/LOCATION/jobs/JOB_ID",
  "config": {
   ...
  },
  "state": "PENDING",
  "createTime": CREATE_TIME,
  "ttlAfterCompletionDays": 30
}

gcloud

1. 创建一个定义作业字段的 request.json 文件。 对 gcloud 命令进行以下替换：
   • STORAGE_BUCKET_NAME：您创建的 Cloud Storage 存储分区的名称。
   • STORAGE_INPUT_VIDEO：您要对其进行转码的 Cloud Storage 存储分区中的视频的名称，例如 my-vid.mp4。此字段应考虑您在存储分区中创建的任何文件夹（例如 input/my-vid.mp4）。
   • LOCATION：运行作业的位置。请使用以下列表中的某个位置。
     显示位置
     • us-central1
     • us-west1
     • us-west2
     • us-east1
     • us-east4
     • southamerica-east1
     • northamerica-northeast1
     • asia-east1
     • asia-northeast1
     • asia-northeast3
     • asia-south1
     • asia-southeast1
     • australia-southeast1
     • europe-west1
     • europe-west2
     • europe-west4
   • STORAGE_OUTPUT_FOLDER：您要在其中保存已编码视频输出的 Cloud Storage 文件夹名称。
     注意：您无需在创建作业之前创建输出文件夹对象。处理作业时，Transcoder API 会自动前置您指定的文件夹名称，作为保存到 Cloud Storage 的对象名称的一部分。

   {
     "config": {
       "inputs": [
             {
               "key": "input0",
               "uri": "gs://STORAGE_BUCKET_NAME/STORAGE_INPUT_VIDEO"
             }
       ],
       "elementaryStreams": [
         {
           "key": "video-stream0",
           "videoStream": {
             "h264": {
               "heightPixels": 360,
               "widthPixels": 640,
               "bitrateBps": 550000,
               "frameRate": 60
             }
           }
         },
         {
           "key": "audio-stream0",
           "audioStream": {
             "codec": "aac",
             "bitrateBps": 64000
           }
         }
       ],
       "muxStreams": [
         {
           "key": "sd",
           "container": "mp4",
           "elementaryStreams": [
             "video-stream0",
             "audio-stream0"
           ]
         }
       ],
       "output": {
         "uri": "gs://STORAGE_BUCKET_NAME/STORAGE_OUTPUT_FOLDER/"
       },
       "spriteSheets": [
         {
           "filePrefix": "small-sprite-sheet",
           "spriteHeightPixels": 32,
           "spriteWidthPixels": 64,
           "interval": "7s"
         },
         {
           "filePrefix": "large-sprite-sheet",
           "spriteHeightPixels": 72,
           "spriteWidthPixels": 128,
           "interval": "7s"
         }
       ]
     }
   }

2. 运行以下命令：

   gcloud transcoder jobs create --location=LOCATION --file="request.json"

   您应该会看到如下所示的响应：

   {
     "name": "projects/PROJECT_NUMBER/locations/LOCATION/jobs/JOB_ID",
     "config": {
      ...
     },
     "state": "PENDING",
     "createTime": CREATE_TIME,
     "ttlAfterCompletionDays": 30
   }
   

C#

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 C# 设置说明进行操作。 如需了解详情，请参阅 Transcoder API C# API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

using Google.Api.Gax.ResourceNames;
using Google.Cloud.Video.Transcoder.V1;
using Google.Protobuf.WellKnownTypes;
using System;

public class CreateJobWithPeriodicImagesSpritesheetSample
{
    public const string SmallSpritesheetFilePrefix = "small-sprite-sheet";
    public const string LargeSpritesheetFilePrefix = "large-sprite-sheet";
    public Job CreateJobWithPeriodicImagesSpritesheet(
        string projectId, string location, string inputUri, string outputUri)
    {
        // Create the client.
        TranscoderServiceClient client = TranscoderServiceClient.Create();

        // Build the parent location name.
        LocationName parent = new LocationName(projectId, location);

        // Build the job config.
        VideoStream videoStream0 = new VideoStream
        {
            H264 = new VideoStream.Types.H264CodecSettings
            {
                BitrateBps = 550000,
                FrameRate = 60,
                HeightPixels = 360,
                WidthPixels = 640
            }
        };

        AudioStream audioStream0 = new AudioStream
        {
            Codec = "aac",
            BitrateBps = 64000
        };

        // Generates a spritesheet of small images taken periodically from the
        // input video. To preserve the source aspect ratio, you should set the
        // SpriteWidthPixels field or the SpriteHeightPixels field, but not
        // both (the API will automatically calculate the missing field). For
        // this sample, we don't care about the aspect ratio so we set both
        // fields.
        SpriteSheet smallSpriteSheet = new SpriteSheet
        {
            FilePrefix = SmallSpritesheetFilePrefix,
            SpriteHeightPixels = 32,
            SpriteWidthPixels = 64,
            Interval = Duration.FromTimeSpan(TimeSpan.FromSeconds(7))
        };

        // Generates a spritesheet of larger images taken periodically from the
        // input video. To preserve the source aspect ratio, you should set the
        // SpriteWidthPixels field or the SpriteHeightPixels field, but not
        // both (the API will automatically calculate the missing field). For
        // this sample, we don't care about the aspect ratio so we set both
        // fields.
        SpriteSheet largeSpriteSheet = new SpriteSheet
        {
            FilePrefix = LargeSpritesheetFilePrefix,
            SpriteHeightPixels = 72,
            SpriteWidthPixels = 128,
            Interval = Duration.FromTimeSpan(TimeSpan.FromSeconds(7))
        };

        ElementaryStream elementaryStream0 = new ElementaryStream
        {
            Key = "video_stream0",
            VideoStream = videoStream0
        };

        ElementaryStream elementaryStream1 = new ElementaryStream
        {
            Key = "audio_stream0",
            AudioStream = audioStream0
        };

        MuxStream muxStream0 = new MuxStream
        {
            Key = "sd",
            Container = "mp4",
            ElementaryStreams = { "video_stream0", "audio_stream0" }
        };

        Input input = new Input
        {
            Key = "input0",
            Uri = inputUri
        };

        Output output = new Output
        {
            Uri = outputUri
        };

        JobConfig jobConfig = new JobConfig
        {
            Inputs = { input },
            Output = output,
            ElementaryStreams = { elementaryStream0, elementaryStream1 },
            MuxStreams = { muxStream0 },
            SpriteSheets = { smallSpriteSheet, largeSpriteSheet }
        };

        // Build the job.
        Job newJob = new Job
        {
            InputUri = inputUri,
            OutputUri = outputUri,
            Config = jobConfig
        };

        // Call the API.
        Job job = client.CreateJob(parent, newJob);

        // Return the result.
        return job;
    }
}

Go

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 Go 设置说明进行操作。 如需了解详情，请参阅 Transcoder API Go API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

import (
	"context"
	"fmt"
	"io"

	"github.com/golang/protobuf/ptypes/duration"

	transcoder "cloud.google.com/go/video/transcoder/apiv1"
	"cloud.google.com/go/video/transcoder/apiv1/transcoderpb"
)

// createJobWithPeriodicImagesSpritesheet creates a job from an ad-hoc configuration and generates
// two spritesheets from the input video. Each spritesheet contains images that are captured
// periodically based on a user-defined time interval.
func createJobWithPeriodicImagesSpritesheet(w io.Writer, projectID string, location string, inputURI string, outputURI string) error {
	// projectID := "my-project-id"
	// location := "us-central1"
	// inputURI := "gs://my-bucket/my-video-file"
	// outputURI := "gs://my-bucket/my-output-folder/"
	ctx := context.Background()
	client, err := transcoder.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("NewClient: %w", err)
	}
	defer client.Close()

	req := &transcoderpb.CreateJobRequest{
		Parent: fmt.Sprintf("projects/%s/locations/%s", projectID, location),
		Job: &transcoderpb.Job{
			InputUri:  inputURI,
			OutputUri: outputURI,
			JobConfig: &transcoderpb.Job_Config{
				Config: &transcoderpb.JobConfig{
					ElementaryStreams: []*transcoderpb.ElementaryStream{
						{
							Key: "video_stream0",
							ElementaryStream: &transcoderpb.ElementaryStream_VideoStream{
								VideoStream: &transcoderpb.VideoStream{
									CodecSettings: &transcoderpb.VideoStream_H264{
										H264: &transcoderpb.VideoStream_H264CodecSettings{
											BitrateBps:   550000,
											FrameRate:    60,
											HeightPixels: 360,
											WidthPixels:  640,
										},
									},
								},
							},
						},
						{
							Key: "audio_stream0",
							ElementaryStream: &transcoderpb.ElementaryStream_AudioStream{
								AudioStream: &transcoderpb.AudioStream{
									Codec:      "aac",
									BitrateBps: 64000,
								},
							},
						},
					},
					MuxStreams: []*transcoderpb.MuxStream{
						{
							Key:               "sd",
							Container:         "mp4",
							ElementaryStreams: []string{"video_stream0", "audio_stream0"},
						},
					},
					SpriteSheets: []*transcoderpb.SpriteSheet{
						{
							FilePrefix:         "small-sprite-sheet",
							SpriteWidthPixels:  64,
							SpriteHeightPixels: 32,
							ExtractionStrategy: &transcoderpb.SpriteSheet_Interval{
								Interval: &duration.Duration{
									Seconds: 7,
								},
							},
						},
						{
							FilePrefix:         "large-sprite-sheet",
							SpriteWidthPixels:  128,
							SpriteHeightPixels: 72,
							ExtractionStrategy: &transcoderpb.SpriteSheet_Interval{
								Interval: &duration.Duration{
									Seconds: 7,
								},
							},
						},
					},
				},
			},
		},
	}
	// Creates the job. Jobs take a variable amount of time to run. You can query for the job state.
	// See https://cloud.google.com/transcoder/docs/how-to/jobs#check_job_status for more info.
	response, err := client.CreateJob(ctx, req)
	if err != nil {
		return fmt.Errorf("createJobWithPeriodicImagesSpritesheet: %w", err)
	}

	fmt.Fprintf(w, "Job: %v", response.GetName())
	return nil
}

Java

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 Java 设置说明进行操作。 如需了解详情，请参阅 Transcoder API Java API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

import com.google.cloud.video.transcoder.v1.AudioStream;
import com.google.cloud.video.transcoder.v1.CreateJobRequest;
import com.google.cloud.video.transcoder.v1.ElementaryStream;
import com.google.cloud.video.transcoder.v1.Input;
import com.google.cloud.video.transcoder.v1.Job;
import com.google.cloud.video.transcoder.v1.JobConfig;
import com.google.cloud.video.transcoder.v1.LocationName;
import com.google.cloud.video.transcoder.v1.MuxStream;
import com.google.cloud.video.transcoder.v1.Output;
import com.google.cloud.video.transcoder.v1.SpriteSheet;
import com.google.cloud.video.transcoder.v1.TranscoderServiceClient;
import com.google.cloud.video.transcoder.v1.VideoStream;
import com.google.protobuf.Duration;
import java.io.IOException;

public class CreateJobWithPeriodicImagesSpritesheet {

  public static final String smallSpritesheetFilePrefix = "small-sprite-sheet";
  public static final String largeSpritesheetFilePrefix = "large-sprite-sheet";
  public static final String spritesheetFileSuffix = "0000000000.jpeg";

  public static void main(String[] args) throws IOException {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "my-project-id";
    String location = "us-central1";
    String inputUri = "gs://my-bucket/my-video-file";
    String outputUri = "gs://my-bucket/my-output-folder/";

    createJobWithPeriodicImagesSpritesheet(projectId, location, inputUri, outputUri);
  }

  // Creates a job from an ad-hoc configuration and generates two spritesheets from the input video.
  // Each spritesheet contains images that are captured periodically based on a user-defined time
  // interval.
  public static void createJobWithPeriodicImagesSpritesheet(
      String projectId, String location, String inputUri, String outputUri) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests.
    try (TranscoderServiceClient transcoderServiceClient = TranscoderServiceClient.create()) {

      VideoStream videoStream0 =
          VideoStream.newBuilder()
              .setH264(
                  VideoStream.H264CodecSettings.newBuilder()
                      .setBitrateBps(550000)
                      .setFrameRate(60)
                      .setHeightPixels(360)
                      .setWidthPixels(640))
              .build();

      AudioStream audioStream0 =
          AudioStream.newBuilder().setCodec("aac").setBitrateBps(64000).build();

      // Generates a spritesheet of small images taken periodically from the input video. To
      // preserve the source aspect ratio, you should set the spriteWidthPixels field or the
      // spriteHeightPixels field, but not both.
      SpriteSheet smallSpriteSheet =
          SpriteSheet.newBuilder()
              .setFilePrefix(smallSpritesheetFilePrefix)
              .setSpriteHeightPixels(32)
              .setSpriteWidthPixels(64)
              .setInterval(Duration.newBuilder().setSeconds(7).build())
              .build();

      // Generates a spritesheet of larger images taken periodically from the input video. To
      SpriteSheet largeSpriteSheet =
          SpriteSheet.newBuilder()
              .setFilePrefix(largeSpritesheetFilePrefix)
              .setSpriteHeightPixels(72)
              .setSpriteWidthPixels(128)
              .setInterval(Duration.newBuilder().setSeconds(7).build())
              .build();

      JobConfig config =
          JobConfig.newBuilder()
              .addInputs(Input.newBuilder().setKey("input0").setUri(inputUri))
              .setOutput(Output.newBuilder().setUri(outputUri))
              .addElementaryStreams(
                  ElementaryStream.newBuilder()
                      .setKey("video_stream0")
                      .setVideoStream(videoStream0))
              .addElementaryStreams(
                  ElementaryStream.newBuilder()
                      .setKey("audio_stream0")
                      .setAudioStream(audioStream0))
              .addMuxStreams(
                  MuxStream.newBuilder()
                      .setKey("sd")
                      .setContainer("mp4")
                      .addElementaryStreams("video_stream0")
                      .addElementaryStreams("audio_stream0")
                      .build())
              .addSpriteSheets(smallSpriteSheet) // Add the spritesheet config to the job config
              .addSpriteSheets(largeSpriteSheet) // Add the spritesheet config to the job config
              .build();

      CreateJobRequest createJobRequest =
          CreateJobRequest.newBuilder()
              .setJob(
                  Job.newBuilder()
                      .setInputUri(inputUri)
                      .setOutputUri(outputUri)
                      .setConfig(config)
                      .build())
              .setParent(LocationName.of(projectId, location).toString())
              .build();

      // Send the job creation request and process the response.
      Job job = transcoderServiceClient.createJob(createJobRequest);
      System.out.println("Job: " + job.getName());
    }
  }
}

Node.js

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 Node.js 设置说明进行操作。 如需了解详情，请参阅 Transcoder API Node.js API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// projectId = 'my-project-id';
// location = 'us-central1';
// inputUri = 'gs://my-bucket/my-video-file';
// outputUri = 'gs://my-bucket/my-output-folder/';

// Imports the Transcoder library
const {TranscoderServiceClient} =
  require('@google-cloud/video-transcoder').v1;

// Instantiates a client
const transcoderServiceClient = new TranscoderServiceClient();

async function createJobWithPeriodicImagesSpritesheet() {
  // Construct request
  const request = {
    parent: transcoderServiceClient.locationPath(projectId, location),
    job: {
      inputUri: inputUri,
      outputUri: outputUri,
      config: {
        elementaryStreams: [
          {
            key: 'video-stream0',
            videoStream: {
              h264: {
                heightPixels: 360,
                widthPixels: 640,
                bitrateBps: 550000,
                frameRate: 60,
              },
            },
          },
          {
            key: 'audio-stream0',
            audioStream: {
              codec: 'aac',
              bitrateBps: 64000,
            },
          },
        ],
        muxStreams: [
          {
            key: 'sd',
            container: 'mp4',
            elementaryStreams: ['video-stream0', 'audio-stream0'],
          },
        ],
        spriteSheets: [
          {
            filePrefix: 'small-sprite-sheet',
            spriteHeightPixels: 32,
            spriteWidthPixels: 64,
            interval: {
              seconds: 7,
            },
          },
          {
            filePrefix: 'large-sprite-sheet',
            spriteHeightPixels: 72,
            spriteWidthPixels: 128,
            interval: {
              seconds: 7,
            },
          },
        ],
      },
    },
  };

  // Run request
  const [response] = await transcoderServiceClient.createJob(request);
  console.log(`Job: ${response.name}`);
}

createJobWithPeriodicImagesSpritesheet();

PHP

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 PHP 设置说明进行操作。 如需了解详情，请参阅 Transcoder API PHP API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

use Google\Cloud\Video\Transcoder\V1\AudioStream;
use Google\Cloud\Video\Transcoder\V1\Client\TranscoderServiceClient;
use Google\Cloud\Video\Transcoder\V1\CreateJobRequest;
use Google\Cloud\Video\Transcoder\V1\ElementaryStream;
use Google\Cloud\Video\Transcoder\V1\Job;
use Google\Cloud\Video\Transcoder\V1\JobConfig;
use Google\Cloud\Video\Transcoder\V1\MuxStream;
use Google\Cloud\Video\Transcoder\V1\SpriteSheet;
use Google\Cloud\Video\Transcoder\V1\VideoStream;
use Google\Protobuf\Duration;

/**
 * Creates a job that generates two spritesheets from the input video. Each
 * spritesheet contains images that are captured periodically.
 *
 * @param string $projectId The ID of your Google Cloud Platform project.
 * @param string $location The location of the job.
 * @param string $inputUri Uri of the video in the Cloud Storage bucket.
 * @param string $outputUri Uri of the video output folder in the Cloud Storage bucket.
 */
function create_job_with_periodic_images_spritesheet($projectId, $location, $inputUri, $outputUri)
{
    // Instantiate a client.
    $transcoderServiceClient = new TranscoderServiceClient();

    $formattedParent = $transcoderServiceClient->locationName($projectId, $location);
    $jobConfig =
        (new JobConfig())->setElementaryStreams([
            (new ElementaryStream())
                ->setKey('video-stream0')
                ->setVideoStream(
                    (new VideoStream())
                        ->setH264(
                            (new VideoStream\H264CodecSettings())
                                ->setBitrateBps(550000)
                                ->setFrameRate(60)
                                ->setHeightPixels(360)
                                ->setWidthPixels(640)
                        )
                ),
            (new ElementaryStream())
                ->setKey('audio-stream0')
                ->setAudioStream(
                    (new AudioStream())
                        ->setCodec('aac')
                        ->setBitrateBps(64000)
                )
        ])->setMuxStreams([
            (new MuxStream())
                ->setKey('sd')
                ->setContainer('mp4')
                ->setElementaryStreams(['video-stream0', 'audio-stream0'])
        ])->setSpriteSheets([
            (new SpriteSheet())
                ->setFilePrefix('small-sprite-sheet')
                ->setSpriteWidthPixels(64)
                ->setSpriteHeightPixels(32)
                ->setInterval(
                    (new Duration())
                        ->setSeconds(7)
                ),
            (new SpriteSheet())
                ->setFilePrefix('large-sprite-sheet')
                ->setSpriteWidthPixels(128)
                ->setSpriteHeightPixels(72)
                ->setInterval(new Duration(['seconds' => 7]))
        ]);

    $job = (new Job())
        ->setInputUri($inputUri)
        ->setOutputUri($outputUri)
        ->setConfig($jobConfig);
    $request = (new CreateJobRequest())
        ->setParent($formattedParent)
        ->setJob($job);

    $response = $transcoderServiceClient->createJob($request);

    // Print job name.
    printf('Job: %s' . PHP_EOL, $response->getName());
}

Python

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 Python 设置说明进行操作。 如需了解详情，请参阅 Transcoder API Python API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

import argparse

from google.cloud.video import transcoder_v1
from google.cloud.video.transcoder_v1.services.transcoder_service import (
    TranscoderServiceClient,
)
from google.protobuf import duration_pb2 as duration


def create_job_with_periodic_images_spritesheet(
    project_id: str,
    location: str,
    input_uri: str,
    output_uri: str,
) -> transcoder_v1.types.resources.Job:
    """Creates a job based on an ad-hoc job configuration that generates two spritesheets.

    Args:
        project_id: The GCP project ID.
        location: The location to start the job in.
        input_uri: Uri of the video in the Cloud Storage bucket.
        output_uri: Uri of the video output folder in the Cloud Storage bucket.

    Returns:
        The job resource.
    """

    client = TranscoderServiceClient()

    parent = f"projects/{project_id}/locations/{location}"
    job = transcoder_v1.types.Job()
    job.input_uri = input_uri
    job.output_uri = output_uri
    job.config = transcoder_v1.types.JobConfig(
        # Create an ad-hoc job. For more information, see https://cloud.google.com/transcoder/docs/how-to/jobs#create_jobs_ad_hoc.
        # See all options for the job config at https://cloud.google.com/transcoder/docs/reference/rest/v1/JobConfig.
        elementary_streams=[
            # This section defines the output video stream.
            transcoder_v1.types.ElementaryStream(
                key="video-stream0",
                video_stream=transcoder_v1.types.VideoStream(
                    h264=transcoder_v1.types.VideoStream.H264CodecSettings(
                        height_pixels=360,
                        width_pixels=640,
                        bitrate_bps=550000,
                        frame_rate=60,
                    ),
                ),
            ),
            # This section defines the output audio stream.
            transcoder_v1.types.ElementaryStream(
                key="audio-stream0",
                audio_stream=transcoder_v1.types.AudioStream(
                    codec="aac", bitrate_bps=64000
                ),
            ),
        ],
        # This section multiplexes the output audio and video together into a container.
        mux_streams=[
            transcoder_v1.types.MuxStream(
                key="sd",
                container="mp4",
                elementary_streams=["video-stream0", "audio-stream0"],
            ),
        ],
        # Generate two sprite sheets from the input video into the GCS bucket. For more information, see
        # https://cloud.google.com/transcoder/docs/how-to/generate-spritesheet#generate_image_periodically.
        sprite_sheets=[
            # Generate a sprite sheet with 64x32px images. An image is taken every 7 seconds from the video.
            transcoder_v1.types.SpriteSheet(
                file_prefix="small-sprite-sheet",
                sprite_width_pixels=64,
                sprite_height_pixels=32,
                interval=duration.Duration(
                    seconds=7,
                ),
            ),
            # Generate a sprite sheet with 128x72px images. An image is taken every 7 seconds from the video.
            transcoder_v1.types.SpriteSheet(
                file_prefix="large-sprite-sheet",
                sprite_width_pixels=128,
                sprite_height_pixels=72,
                interval=duration.Duration(
                    seconds=7,
                ),
            ),
        ],
    )
    response = client.create_job(parent=parent, job=job)
    print(f"Job: {response.name}")
    return response

Ruby

在试用此示例之前，请按照 Transcoder API 快速入门：使用客户端库中的 Ruby 设置说明进行操作。 如需了解详情，请参阅 Transcoder API Ruby API 参考文档。

如需向 Transcoder API 进行身份验证，请设置应用默认凭据。 如需了解详情，请参阅为本地开发环境设置身份验证。

# project_id  = "YOUR-GOOGLE-CLOUD-PROJECT"  # (e.g. "my-project")
# location    = "YOUR-JOB-LOCATION"  # (e.g. "us-central1")
# input_uri   = "YOUR-GCS-INPUT-VIDEO"  # (e.g. "gs://my-bucket/my-video-file")
# output_uri  = "YOUR-GCS-OUTPUT-FOLDER/"  # (e.g. "gs://my-bucket/my-output-folder/")

# Require the Transcoder client library.
require "google/cloud/video/transcoder"

# Create a Transcoder client.
client = Google::Cloud::Video::Transcoder.transcoder_service

# Build the resource name of the parent.
parent = client.location_path project: project_id, location: location

# Build the job config.
new_job = {
  input_uri: input_uri,
  output_uri: output_uri,
  config: {
    elementary_streams: [
      {
        key: "video-stream0",
        video_stream: {
          h264: {
            height_pixels: 360,
            width_pixels: 640,
            bitrate_bps: 550_000,
            frame_rate: 60
          }
        }
      },
      {
        key: "audio-stream0",
        audio_stream: {
          codec: "aac",
          bitrate_bps: 64_000
        }
      }
    ],
    mux_streams: [
      {
        key: "sd",
        container: "mp4",
        elementary_streams: [
          "video-stream0",
          "audio-stream0"
        ]
      }
    ],
    sprite_sheets: [
      {
        file_prefix: "small-sprite-sheet",
        sprite_width_pixels: 64,
        sprite_height_pixels: 32,
        interval: {
          seconds: 7
        }
      },
      {
        file_prefix: "large-sprite-sheet",
        sprite_width_pixels: 128,
        sprite_height_pixels: 72,
        interval: {
          seconds: 7
        }
      }
    ]
  }
}

job = client.create_job parent: parent, job: new_job

# Print the job name.
puts "Job: #{job.name}"

注意：如需保留源宽高比，请设置 spriteWidthPixels 字段或 spriteHeightPixels 字段，但不能同时设置这两者（API 会自动计算缺失的字段）。

对示例视频使用此配置，以便生成以下精灵表：

图 3.小图片精灵表（每 7 秒钟生成 1 张缩略图）

图 4.大图片精灵表（每 7 秒钟生成 1 张缩略图）

示例视频中生成 8 张缩略图，时长为 60 秒。