Set up a multi-cluster mesh outside Google Cloud

This guide explains how to set up a multi-cluster mesh for the following platforms:

• Google Distributed Cloud
• Google Distributed Cloud
• GKE on Azure
• GKE on AWS
• Attached clusters, including Amazon EKS clusters and Microsoft AKS clusters

This guide shows how to set up two clusters, but you can extend this process to incorporate any number of clusters into your mesh.

Platform note: The asmcli create-mesh command that you use to enable endpoint discovery requires all the clusters to be on the same platform. Currently, asmcli create-mesh only supports hybrid mesh in preview.

Before you begin

This guide assumes you installed Cloud Service Mesh using asmcli install. You need asmcli and the configuration package that asmcli downloads to the directory that you specified in --output_dir when you ran asmcli install. If need to get set up, follow the steps in Install dependent tools and validate cluster to:

• Install required tools
• Download asmcli
• Grant cluster admin permissions
• Validate your project and cluster

You need access to the kubeconfig files for all the clusters that you are setting up in the mesh.

Warning: Only use kubeconfig files from trusted sources. Using a specially-crafted kubeconfig file could result in malicious code execution or file exposure. If you must use an untrusted kubeconfig file, inspect it carefully first, much as you would a shell script.

Set up environment variables and placeholders

You need the following environment variables when you install the east-west gateway.

1. Create an environment variable for the project number. In the following command, replace FLEET_PROJECT_ID with the the project ID of the fleet host project.

   export PROJECT_NUMBER=$(gcloud projects describe FLEET_PROJECT_ID \
   --format="value(projectNumber)")
   

2. Create an environment variable for the mesh identifier.

   export MESH_ID="proj-${PROJECT_NUMBER}"
   

3. Create environment variables for the cluster names in the format that asmcli requires.

   export CLUSTER_1="cn-FLEET_PROJECT_ID-global-CLUSTER_NAME_1"
   export CLUSTER_2="cn-FLEET_PROJECT_ID-global-CLUSTER_NAME_2"
   

4. Get the context name for the clusters by using the values under the NAME column in the output of this command:

   kubectl config get-contexts

5. Set the environment variables to the cluster context names, which this guide uses in many steps later:

   export CTX_1=CLUSTER1_CONTEXT_NAME
   export CTX_2=CLUSTER2_CONTEXT_NAME
   

Install the east-west gateway

In the following commands:

• Replace CLUSTER_NAME_1 and CLUSTER_NAME_2 with the names of your clusters.

• Replace PATH_TO_KUBECONFIG_1 and PATH_TO_KUBECONFIG_2 with the kubeconfig files for your clusters.

Anthos Clusters

Mesh CA or CA Service

1. Install a gateway in cluster1 that is dedicated to east-west traffic to $CLUSTER_2. By default, this gateway will be public on the Internet. Production systems might require additional access restrictions, for example firewall rules, to prevent external attacks.

   Note: If you installed Cloud Service Mesh using different values for --network_id, then you should pass the same values into gen-eastwest-gateway.sh with the --network flag.

   asm/istio/expansion/gen-eastwest-gateway.sh \
       --mesh ${MESH_ID}  \
       --cluster ${CLUSTER_1}  \
       --network default \
       --revision asm-1234-1 | \
       ./istioctl --kubeconfig=PATH_TO_KUBECONFIG_1 \
       install -y --set spec.values.global.pilotCertProvider=kubernetes -f -
   

2. Install a gateway in $CLUSTER_2 that is dedicated to east-west traffic for $CLUSTER_1.

   asm/istio/expansion/gen-eastwest-gateway.sh \
       --mesh ${MESH_ID}  \
       --cluster ${CLUSTER_2}  \
       --network default \
       --revision asm-1234-1 | \
       ./istioctl --kubeconfig=PATH_TO_KUBECONFIG_2 \
       install -y --set spec.values.global.pilotCertProvider=kubernetes -f -
   

Istio CA

1. Install a gateway in cluster1 that is dedicated to east-west traffic to $CLUSTER_2. By default, this gateway will be public on the Internet. Production systems might require additional access restrictions, for example firewall rules, to prevent external attacks.

   Note: If you installed Cloud Service Mesh using different values for --network_id, then you should pass the same values into gen-eastwest-gateway.sh with the --network flag.

   asm/istio/expansion/gen-eastwest-gateway.sh \
       --mesh ${MESH_ID}  \
       --cluster ${CLUSTER_1}  \
       --network default \
       --revision asm-1234-1 | \
       ./istioctl --kubeconfig=PATH_TO_KUBECONFIG_1 \
       install -y --set spec.values.global.pilotCertProvider=istiod -f -
   

2. Install a gateway in $CLUSTER_2 that is dedicated to east-west traffic for $CLUSTER_1.

   asm/istio/expansion/gen-eastwest-gateway.sh \
       --mesh ${MESH_ID}  \
       --cluster ${CLUSTER_2}  \
       --network default \
       --revision asm-1234-1 | \
       ./istioctl --kubeconfig=PATH_TO_KUBECONFIG_2 \
       install -y --set spec.values.global.pilotCertProvider=istiod -f -
   

Azure, AWS, & Attached

Mesh CA

1. Install a gateway in cluster1 that is dedicated to east-west traffic to $CLUSTER_2. By default, this gateway will be public on the Internet. Production systems might require additional access restrictions, for example firewall rules, to prevent external attacks.

   Note: If you installed Cloud Service Mesh using different values for --network_id, then you should pass the same values into gen-eastwest-gateway.sh with the --network flag.

   asm/istio/expansion/gen-eastwest-gateway.sh \
       --mesh ${MESH_ID}  \
       --cluster ${CLUSTER_1}  \
       --network default \
       --revision asm-1234-1 | \
       ./istioctl --kubeconfig=PATH_TO_KUBECONFIG_1 \
       install -y --set spec.values.global.pilotCertProvider=istiod -f -
   

2. Install a gateway in $CLUSTER_2 that is dedicated to east-west traffic for $CLUSTER_1.

   asm/istio/expansion/gen-eastwest-gateway.sh \
       --mesh ${MESH_ID}  \
       --cluster ${CLUSTER_2}  \
       --network default \
       --revision asm-1234-1 | \
       ./istioctl --kubeconfig=PATH_TO_KUBECONFIG_2 \
       install -y --set spec.values.global.pilotCertProvider=istiod -f -
   

Istio CA

1. Install a gateway in cluster1 that is dedicated to east-west traffic to $CLUSTER_2. By default, this gateway will be public on the Internet. Production systems might require additional access restrictions, for example firewall rules, to prevent external attacks.

   Note: If you installed Cloud Service Mesh using different values for --network_id, then you should pass the same values into gen-eastwest-gateway.sh with the --network flag.

   asm/istio/expansion/gen-eastwest-gateway.sh \
       --mesh ${MESH_ID}  \
       --cluster ${CLUSTER_1}  \
       --network default \
       --revision asm-1234-1 | \
       ./istioctl --kubeconfig=PATH_TO_KUBECONFIG_1 \
       install -y --set spec.values.global.pilotCertProvider=istiod -f -
   

2. Install a gateway in $CLUSTER_2 that is dedicated to east-west traffic for $CLUSTER_1.

   asm/istio/expansion/gen-eastwest-gateway.sh \
       --mesh ${MESH_ID}  \
       --cluster ${CLUSTER_2}  \
       --network default \
       --revision asm-1234-1 | \
       ./istioctl --kubeconfig=PATH_TO_KUBECONFIG_2 \
       install -y --set spec.values.global.pilotCertProvider=istiod -f -
   

Platform note: For Google Distributed Cloud, an external IP address won't be assigned until later, when you complete the steps described in Configure external IP addresses for Google Distributed Cloud.

Exposing services

Since the clusters are on separate networks, you need to expose all services (*.local) on the east-west gateway in both clusters. While this gateway is public on the Internet, services behind it can only be accessed by services with a trusted mTLS certificate and workload ID, just as if they were on the same network.

1. Expose services via the east-west gateway for CLUSTER_NAME_1.

   kubectl --kubeconfig=PATH_TO_KUBECONFIG_1 apply -n istio-system -f \
       asm/istio/expansion/expose-services.yaml
   

2. Expose services via the east-west gateway for CLUSTER_NAME_2.

   kubectl --kubeconfig=PATH_TO_KUBECONFIG_2 apply -n istio-system -f \
       asm/istio/expansion/expose-services.yaml
   

Enable endpoint discovery

Note: For more information on endpoint discovery, refer to Endpoint discovery with multiple control planes.

Run the asmcli create-mesh command to enable endpoint discovery. This example only shows two clusters, but you can run the command to enable endpoint discovery on additional clusters, subject to the GKE Hub service limit.

  ./asmcli create-mesh \
      FLEET_PROJECT_ID \
      PATH_TO_KUBECONFIG_1 \
      PATH_TO_KUBECONFIG_2

Verify multicluster connectivity

This section explains how to deploy the sample HelloWorld and Sleep services to your multi-cluster environment to verify that cross-cluster load balancing works.

Note: These sample services are located in the Istio samples directory included in the istioctl tarball (located in OUTPUT_DIR/istio-${ASM_VERSION%+*}/samples) and not the samples directory downloaded by asmcli (located in OUTPUT_DIR/samples).

Enable sidecar injection

Locate the revision label value, which you use in later steps.

Note: If your clusters each have different versions of Cloud Service Mesh you must run the following command for each cluster.

Use the following command to locate the revision label, which you will use in later steps.

kubectl -n istio-system get pods -l app=istiod --show-labels

The output looks similar to the following:

NAME                                READY   STATUS    RESTARTS   AGE   LABELS
istiod-asm-173-3-5788d57586-bljj4   1/1     Running   0          23h   app=istiod,istio.io/rev=asm-173-3,istio=istiod,pod-template-hash=5788d57586
istiod-asm-173-3-5788d57586-vsklm   1/1     Running   1          23h   app=istiod,istio.io/rev=asm-173-3,istio=istiod,pod-template-hash=5788d57586

In the output, under the LABELS column, note the value of the istiod revision label, which follows the prefix istio.io/rev=. In this example, the value is asm-173-3. Use the revision value in the steps in the next section.

Install the HelloWorld service

Note: The HelloWorld service example uses Docker Hub. In a private cluster, the container runtime can pull container images from Artifact Registry by default. The container runtime cannot pull images from any other container image registry on the internet. You can download the image and push to Artifact Registry or use Cloud NAT to provide outbound internet access for certain private nodes. For more information, see Migrate external containers and Creating a private cluster.

1. Create the sample namespace and the Service Definition in each cluster. In the following command, substitute REVISION with the istiod revision label that you noted from the previous step.

   for CTX in ${CTX_1} ${CTX_2}
   do
       kubectl create --context=${CTX} namespace sample
       kubectl label --context=${CTX} namespace sample \
           istio-injection- istio.io/rev=REVISION --overwrite
   done
   

   where REVISION is the istiod revision label that you previously noted.

   The output is:

   label "istio-injection" not found.
   namespace/sample labeled
   

   You can safely ignore label "istio-injection" not found.

2. Create the HelloWorld service in both clusters:

   kubectl create --context=${CTX_1} \
       -f ${SAMPLES_DIR}/samples/helloworld/helloworld.yaml \
       -l service=helloworld -n sample
   

   kubectl create --context=${CTX_2} \
       -f ${SAMPLES_DIR}/samples/helloworld/helloworld.yaml \
       -l service=helloworld -n sample
   

Deploy HelloWorld v1 and v2 to each cluster

1. Deploy HelloWorld v1 to CLUSTER_1 and v2 to CLUSTER_2, which helps later to verify cross-cluster load balancing:

   kubectl create --context=${CTX_1} \
     -f ${SAMPLES_DIR}/samples/helloworld/helloworld.yaml \
     -l version=v1 -n sample

   kubectl create --context=${CTX_2} \
     -f ${SAMPLES_DIR}/samples/helloworld/helloworld.yaml \
     -l version=v2 -n sample

2. Confirm HelloWorld v1 and v2 are running using the following commands. Verify that the output is similar to that shown.:

   kubectl get pod --context=${CTX_1} -n sample

   NAME                            READY     STATUS    RESTARTS   AGE
   helloworld-v1-86f77cd7bd-cpxhv  2/2       Running   0          40s

   kubectl get pod --context=${CTX_2} -n sample

   NAME                            READY     STATUS    RESTARTS   AGE
   helloworld-v2-758dd55874-6x4t8  2/2       Running   0          40s

Deploy the Sleep service

1. Deploy the Sleep service to both clusters. This pod generates artificial network traffic for demonstration purposes:

   for CTX in ${CTX_1} ${CTX_2}
   do
       kubectl apply --context=${CTX} \
           -f ${SAMPLES_DIR}/samples/sleep/sleep.yaml -n sample
   done
   

2. Wait for the Sleep service to start in each cluster. Verify that the output is similar to that shown:

   kubectl get pod --context=${CTX_1} -n sample -l app=sleep

   NAME                             READY   STATUS    RESTARTS   AGE
   sleep-754684654f-n6bzf           2/2     Running   0          5s

   kubectl get pod --context=${CTX_2} -n sample -l app=sleep

   NAME                             READY   STATUS    RESTARTS   AGE
   sleep-754684654f-dzl9j           2/2     Running   0          5s

Verify cross-cluster load balancing

Call the HelloWorld service several times and check the output to verify alternating replies from v1 and v2:

1. Call the HelloWorld service:

   kubectl exec --context="${CTX_1}" -n sample -c sleep \
       "$(kubectl get pod --context="${CTX_1}" -n sample -l \
       app=sleep -o jsonpath='{.items[0].metadata.name}')" \
       -- /bin/sh -c 'for i in $(seq 1 20); do curl -sS helloworld.sample:5000/hello; done'
   

   The output is similar to that shown:

   Hello version: v2, instance: helloworld-v2-758dd55874-6x4t8
   Hello version: v1, instance: helloworld-v1-86f77cd7bd-cpxhv
   ...

2. Call the HelloWorld service again:

   kubectl exec --context="${CTX_2}" -n sample -c sleep \
       "$(kubectl get pod --context="${CTX_2}" -n sample -l \
       app=sleep -o jsonpath='{.items[0].metadata.name}')" \
       -- /bin/sh -c 'for i in $(seq 1 20); do curl -sS helloworld.sample:5000/hello; done'
   

   The output is similar to that shown:

   Hello version: v2, instance: helloworld-v2-758dd55874-6x4t8
   Hello version: v1, instance: helloworld-v1-86f77cd7bd-cpxhv
   ...

Congratulations, you've verified your load-balanced, multi-cluster Cloud Service Mesh!

Clean up

When you finish verifying load balancing, remove the HelloWorld and Sleep service from your cluster.

kubectl delete ns sample --context ${CTX_1}
kubectl delete ns sample --context ${CTX_2}