Profile Vertex AI data in an organization or folder

Preview

This feature is subject to the "Pre-GA Offerings Terms" in the General Service Terms section of the Service Specific Terms. Pre-GA features are available "as is" and might have limited support. For more information, see the launch stage descriptions.

This page describes how to configure Vertex AI data discovery at the level of an organization or folder. If you want to profile a project, see Profile Vertex AI data in a single project.

To join this Preview, send an email to [e-mail].

For more information about the discovery service, see Data profiles.

Before you begin

1. Confirm that you have the IAM permissions that are required to configure data profiles at the organization level.

   If you don't have the Organization Administrator (roles/resourcemanager.organizationAdmin) or Security Admin (roles/iam.securityAdmin) role, you can still create a scan configuration. However, after you create the scan configuration, someone with either of those roles must grant data profiling access to your service agent.

2. You must have an inspection template in each region where you have data to be profiled. If you want to use a single template for multiple regions, you can use a template that is stored in the global region. If organizational policies prevent you from creating an inspection template in the global region, then you must set a dedicated inspection template for each region. For more information, see Data residency considerations.

   This task lets you create an inspection template in the global region only. If you need dedicated inspection templates for one or more regions, you must create those templates before performing this task.

3. To send Pub/Sub notifications to a topic when certain events occur—such as when Sensitive Data Protection profiles a new dataset—create a Pub/Sub topic before performing this task.

To generate data profiles, you need a service agent container and a service agent within it. This task lets you create them automatically.

Create a scan configuration

1. Go to the Create scan configuration page.

   Go to Create scan configuration

2. Go to your organization. On the toolbar, click the project selector and select your organization.

The following sections provide more information about the steps in the Create scan configuration page. At the end of each section, click Continue.

Select a discovery type

Select Vertex AI.

Select scope

Do one of the following:

• To configure profiling at the organization level, select Scan entire organization.
• To configure profiling at the level of a folder, select Scan selected folder. Click Browse and select the folder.

Manage schedules

If the default profiling frequency suits your needs, you can skip this section of the Create scan configuration page.

Configure this section for the following reasons:

• To make fine-grained adjustments to the profiling frequency of all your data or certain subsets of your data.
• To specify the datasets that you don't want to profile.
• To specify the datasets that you don't want profiled more than once.

To make fine-grained adjustments to profiling frequency, follow these steps:

1. Click Add schedule.

2. In the Filters section, you define one or more filters that specify which datasets are in the schedule's scope.

   Specify a project ID or a regular expression that specifies one or more projects. Regular expressions must follow the RE2 syntax.

   For example, if you want all datasets in a project to be included in the filter, enter the project ID in the Project ID field.

   If you want to add more filters, click Add filter and repeat this step.

3. Click Frequency.

4. In the Frequency section, specify whether the discovery service should profile the datasets that you selected and, if so, how often:

   • If you never want the datasets to be profiled, turn off Do profile this data.

   • If you want the datasets to be profiled at least once, leave Do profile this data on.

     In the succeeding fields in this section, you specify whether the system should reprofile your data and what events should trigger a reprofile operation. For more information, see Frequency of data profile generation.

     1. For On a schedule, specify how often you want the the datasets to be reprofiled. The datasets are reprofiled regardless of whether they underwent any changes.
     2. For When inspect template changes, specify whether you want your data to be reprofiled when the associated inspection template is updated, and if so, how often.
        Note: You specify the inspection templates to use in the Select inspection template step on this page.

        An inspection template change is detected when either of the following occurs:

        • The name of an inspection template changes in your scan configuration.
        • The updateTime of an inspection template changes.

     For example, if you set an inspection template for the us-west1 region and you update that inspection template, then only data in the us-west1 region will be reprofiled.

5. Optional: Click Conditions.

   In the Conditions section, you specify any conditions that the datasets—defined in your filters—must meet before Sensitive Data Protection profiles them.

   If needed, set the following:

   • Minimum condition: If you want to delay profiling of a dataset until it reaches a certain age, turn on this option. Then, enter the minimum duration.

   • Time condition: If you don't want old datasets to ever be profiled, turn on this option. Then, use the date picker to select a date and time. Any dataset created on or before your selected timestamp is excluded from profiling.

   Example conditions

   Suppose that you have the following configuration:

   • Minimum conditions

     • Minimum duration: 24 hours

   • Time condition

     • Timestamp: 05/4/22, 11:59 PM

   In this case, Sensitive Data Protection excludes any dataset that was created on or before May 4, 2022, 11:59 PM. Among the datasets that were created after that date and time, Sensitive Data Protection profiles only the datasets that are at least 24 hours old.

6. Click Done.

7. If you want to add more schedules, click Add schedule and repeat the previous steps.

8. To specify precedence between schedules, reorder them using the up and down arrows.

   The order of the schedules specifies how conflicts between schedules are resolved. If a dataset matches the filters of two different schedules, the schedule higher in the schedules list dictates the profiling frequency for that dataset.

   Note: If your discovery pricing mode is subscription mode, the rate at which Sensitive Data Protection profiles your data is affected by how much capacity you purchased. To determine your daily profiling capacity, see Monitoring utilization. If you have under-provisioned capacity, then the profiling frequencies that you set in your schedules might not be followed. If there is a backlog of datasets to be profiled, the schedule order doesn't dictate the order in which Sensitive Data Protection profiles the datasets in the backlog. Rather, all datasets in scope get a randomly assigned slot in the queue.

   The last schedule in the list is always the one labeled Default schedule. This default schedule covers the datasets in your selected scope that don't match any of the schedules that you created. This default schedule follows the system default profiling frequency.

9. If you want to adjust the default schedule, click Edit schedule, and adjust the settings as needed.

Select inspection template

Depending on how you want to provide an inspection configuration, choose one of the following options. Regardless of which option you choose, Sensitive Data Protection scans your data in the region where that data is stored. That is, your data doesn't leave its region of origin.

Option 1: Create an inspection template

Choose this option if you want to create a new inspection template in the global region.

1. Click Create new inspection template.

2. Optional: To modify the default selection of infoTypes, click Manage infoTypes.

   For more information about how to manage built-in and custom infoTypes, see Manage infoTypes through the Google Cloud console.

   You must have at least one infoType selected to continue.

3. Optional: Configure the inspection template further by adding rulesets and setting a confidence threshold. For more information, see Configure detection.

When Sensitive Data Protection creates the scan configuration, it stores this new inspection template in the global region.

Option 2: Use an existing inspection template

Choose this option if you have existing inspection templates that you want to use.

1. Click Select existing inspection template.
2. Enter the full resource name of the inspection template that you want to use. The Region field is automatically populated with the name of the region where your inspection template is stored.

   The inspection template that you enter must be in the same region as the data to be profiled.

   To respect data residency, Sensitive Data Protection doesn't use an inspection template outside the region where that template is stored.

   To find the full resource name of an inspection template, follow these steps:

   1. Go to your inspection templates list. This page opens on a separate tab.

      Go to inspection templates

   2. Switch to the project that contains the inspection template that you want to use.
   3. On the Templates tab, click the template ID of the template that you want to use.
   4. On the page that opens, copy the full resource name of the template. The full resource name follows this format:

      projects/PROJECT_ID/locations/REGION/inspectTemplates/TEMPLATE_ID

   5. On the Create scan configuration page, in the Template name field, paste the full resource name of the template.
3. To add an inspection template for another region, click Add inspection template and enter the template's full resource name. Repeat this for each region where you have a dedicated inspection template.
4. Optional: Add an inspection template that's stored in the global region. Sensitive Data Protection automatically uses that template for data in regions where you don't have a dedicated inspection template.
Caution: If you don't include an inspection template that's stored in the global region, Sensitive Data Protection can't profile data in regions that don't have a dedicated inspection template. For more information, see Data residency considerations.

Add actions

In the following sections, you specify actions that you want Sensitive Data Protection to take after it generates the data profiles.

For information about how other Google Cloud services may charge you for configuring actions, see Pricing for exporting data profiles.

Publish to Google Security Operations

Metrics gathered from data profiles can add context to your Google Security Operations findings. The added context can help you determine the most important security issues to address.

For example, if you're investigating a particular service agent, Google Security Operations can determine what resources the service agent accessed and whether any of those resources had high-sensitivity data.

To send your data profiles to your Google Security Operations instance, turn on Google Security Operations.

If you don't have a Google Security Operations instance enabled for your organization—through the standalone product or through Security Command Center Enterprise—turning on this option has no effect.

Publish to Security Command Center

Findings from data profiles provide context when you triage and develop response plans for your vulnerability and threat findings in Security Command Center.

Note: You can also configure Security Command Center to automatically prioritize resources for the attack path simulation feature according to the calculated sensitivity of the data that the resources contain. For more information, see Set resource priority values automatically by data sensitivity.

Before you can use this action, Security Command Center must be activated at the organization level. Turning on Security Command Center at the organization level enables the flow of findings from integrated services like Sensitive Data Protection. Sensitive Data Protection works with Security Command Center in all service tiers.

If Security Command Center isn't activated at the organization level, Sensitive Data Protection findings won't appear in Security Command Center. For more information, see Check the activation level of Security Command Center.

To send the results of your data profiles to Security Command Center, make sure the Publish to Security Command Center option is turned on.

For more information, see Publish data profiles to Security Command Center.

Save data profile copies to BigQuery

Turning on Save data profile copies to BigQuery lets you keep a saved copy or history of all of your generated profiles. Doing so can be useful for creating audit reports and visualizing data profiles. You can also load this information into other systems.

Also, this option lets you see all of your data profiles in a single view, regardless of which region your data resides in. If you turn off this option, you can still view the data profiles in the Google Cloud console. However, in the Google Cloud console, you select one region at a time, and see only the data profiles for that region.

Note: When Sensitive Data Protection fails to profile a dataset, it periodically retries. To minimize noise in the exported data, Sensitive Data Protection exports only the successfully generated profiles to BigQuery.

To export copies of the data profiles to a BigQuery table, follow these steps:

1. Turn on Save data profile copies to BigQuery.

2. Enter the details of the BigQuery table where you want to save the data profiles:

   • For Project ID, enter the ID of an existing project where you want data profiles to be exported to.

   • For Dataset ID, enter the name of an existing dataset in the project where you want data profiles to be exported to.

   • For Table ID, enter a name for the BigQuery table where data profiles will be exported to. If you haven't created this table, Sensitive Data Protection automatically creates it for you using the name you provide.

Sensitive Data Protection starts exporting profiles from the time you turn on this option. Profiles that were generated before you turned on exporting aren't saved to BigQuery.

Note: Your service agent must have write access on the output table. If you don't have a service agent yet, Sensitive Data Protection lets you create one later in the Create scan configuration page.

Publish to Pub/Sub

Turning on Publish to Pub/Sub lets you take programmatic actions based on profiling results. You can use Pub/Sub notifications to develop a workflow for catching and remediating findings with significant data risk or sensitivity.

To send notifications to a Pub/Sub topic, follow these steps:

1. Turn on Publish to Pub/Sub.

   A list of options appears. Each option describes an event that causes Sensitive Data Protection to send a notification to Pub/Sub.

2. Select the events that should trigger a Pub/Sub notification.

   If you select Send a Pub/Sub notification each time a profile is updated, Sensitive Data Protection sends a notification when there's a change in the sensitivity level, data risk level, detected infoTypes, public access, and other important metrics in the profile.

3. For each event you select, follow these steps:

   1. Enter the name of the topic. The name must be in the following format:

      projects/PROJECT_ID/topics/TOPIC_ID
      

      Replace the following:

      • PROJECT_ID: the ID of the project associated with the Pub/Sub topic.
      • TOPIC_ID: the ID of the Pub/Sub topic.

   2. Specify whether to include the full dataset profile in the notification, or just the full resource name of the dataset that was profiled.

   3. Set the minimum data risk and sensitivity levels that must be met for Sensitive Data Protection to send a notification.

   4. Specify whether only one or both of the data risk and sensitivity conditions must be met. For example, if you choose AND, then both the data risk and the sensitivity conditions must be met before Sensitive Data Protection sends a notification.

Note: Your service agent must have publishing access on the Pub/Sub topic. An example of a role that has publishing access is the Pub/Sub Publisher role (roles/pubsub.publisher). If you don't have a service agent yet, Sensitive Data Protection lets you create one later in the Create scan configuration page. If there are configuration or permission issues with the Pub/Sub topic, Sensitive Data Protection retries sending the Pub/Sub notification for up to two weeks. After two weeks, the notification is discarded.

Manage service agent container and billing

In this section, you specify the project to use as a service agent container. You can have Sensitive Data Protection automatically create a new project, or you can choose an existing project.

Regardless of whether you're using a newly created service agent or reusing an existing one, make sure it has read access to the data to be profiled.

Automatically create a project

If you don't have the permissions needed to create a project in the organization, you need to select an existing project instead or obtain the required permissions. For information about the required permissions, see Roles required to work with data profiles at the organization or folder level.

To automatically create a project to use as your service agent container, follow these steps:

1. In the Service agent container field, review the suggested project ID and edit it as needed.
2. Click Create.
3. Optional: Update the default project name.

4. Select the account to bill for all billable operations related to this new project, including operations that aren't related to discovery.

   Note: If you already have an organization-level discovery subscription, this billing account is still required to create the project. However, for all discovery operations, you are billed through the project associated with your subscription.

5. Click Create.

Sensitive Data Protection creates the new project. The service agent within this project will be used to authenticate to Sensitive Data Protection and other APIs.

Select an existing project

To select an existing project as your service agent container, click the Service agent container field and select the project.

Set location to store configuration

Click the Resource location list, and select the region where you want to store this scan configuration. All scan configurations that you later create will also be stored in this location.

Where you choose to store your scan configuration doesn't affect the data to be scanned. Your data is scanned in the same region where that data is stored. For more information, see Data residency considerations.

Note: If you already have an existing scan configuration, you can't change the value set in this field. All scan configurations are stored in the same location. If you want to change the location of all your scan configurations, you must delete them, recreate them, and store them in the new location.

Review and create

1. If you want to make sure that profiling doesn't start automatically after you create the scan configuration, select Create scan in paused mode.

   This option is useful in the following cases:

   • Your Google Cloud administrator still needs to grant data profiling access to the service agent.
   • You want to create multiple scan configurations and you want some configurations to override others.
   • You opted to save data profiles to BigQuery, and you want to make sure the service agent has write access to your output table.
   • You configured Pub/Sub notifications and you want to grant publishing access to the service agent.
2. Review your settings and click Create.

   Sensitive Data Protection creates the scan configuration and adds it to the discovery scan configurations list.

To view or manage your scan configurations, see Manage scan configurations.

Note: We regularly improve our detection algorithm. If we find that your organization or project would benefit from a new improvement that we implement, we might automatically regenerate your data profiles and redo the actions in your scan configuration. You won't incur Sensitive Data Protection charges for this operation. However, because we will redo the actions, you might incur charges for your use of other Google Cloud services. For example, if you configured Sensitive Data Protection to save the data profiles to BigQuery, you might incur BigQuery charges.

What's next

• If you don't have the Organization Administrator (roles/resourcemanager.organizationAdmin) or Security Admin (roles/iam.securityAdmin) role, someone with one of those roles must grant data profiling access to your service agent.
• Learn how to manage data profiles.
• Learn how to manage scan configurations.
• Learn how to receive and parse Pub/Sub messages published by the data profiler.
• Learn how to troubleshoot issues with data profiles.