Troubleshoot Distributed Cloud Edge

Google remotely monitors and maintains the Google Distributed Cloud Edge hardware. For this purpose, Google engineers have Secure Shell (SSH) access to the Distributed Cloud Edge hardware. If Google detects an issue, a Google engineer contacts you to troubleshoot and resolve it. If you have identified an issue yourself, contact Google Support immediately to diagnose and resolve it.

Network connectivity loss

If the Distributed Cloud Edge hardware loses its connection to Google Cloud and remains disconnected for 120 seconds, the Distributed Cloud Edge control plane marks the affected Pods as "Not Ready" and initiates Pod eviction.

To mitigate this, you must plan your Distributed Cloud Edge configuration and architect your workloads for your chosen level of availability. For more information, see Availability best practices.

Corrupt BGP sessions in Cloud Router resources used by VPN connections

Distributed Cloud Edge VPN connections rely on BGP sessions established and managed by their corresponding Cloud Router resources to advertise routes between the Distributed Cloud Edge cluster and Google Cloud. If you modify the configuration of a Cloud Router resource associated with a Distributed Cloud Edge VPN connection, that connection can stop functioning.

To recover the corrupt BGP session configuration in the affected Cloud Router, complete the following steps:

  1. In the Google Cloud console, get the name of the corrupt BGP session. For example:

    INTERFACE=anthos-mcc-34987234
    
  2. Get the peer BGP and the Cloud Router BGP IP addresses for the corrupted BGP session, as well as the peer ASN used by the affected Distributed Cloud Edge VPN connection. For example:

    GDCE_BGP_IP=168.254.208.74
    CLOUD_ROUTER_BGP_IP=168.254.208.73
    PEER_ASN=65506
    

    If you deleted the BGP session, get this information from the Distributed Cloud Edge cluster instead:

    1. Get the cluster credentials:

      gcloud edge-cloud container clusters get-credentials CLUSTER_ID \
        --location REGION \
        --project PROJECT_ID
      

      Replace the following:

      • CLUSTER_ID: the name of the target cluster.
      • REGION: the Google Cloud region in which the target cluster is created.
      • PROJECT_ID: the ID of the target Google Cloud project.
    2. Get the configuration of the MultiClusterConnectivityConfig resource:

      kubectl get multiclusterconnectivityconfig -A
      

      The command returns output similar to the following:

       NAMESPACE     NAME                   LOCAL ASN              PEER ASN
       kube-system   MultiClusterConfig1    65505                   65506
       ```
      
    3. Get the peer BGP IP address, the Cloud Router IP address, and the BGP session ASN:

      kubectl describe multiclusterconnectivityconfig -n kube-system MCC_CONFIG_NAME   
      

      Replace MCC_CONFIG_NAME with the name of the MultiClusterConfigResource that you obtained in the previous step.

      The command returns output similar to the following:

       ​​Spec:
       Asns:
         Peer:  65505
         Self:  65506 # GDCE ASN
       Tunnels:
         Ike Key:
           Name:       MCC_CONFIG_NAME-0
           Namespace:  kube-system
         Peer:
           Bgp IP:      169.254.208.73 # Cloud Router BGP IP
           Private IP:  34.157.98.148
           Public IP:   34.157.98.148
         Self:
           Bgp IP:      169.254.208.74 # GDCE BGP IP
           Private IP:  10.100.29.49
           Public IP:   208.117.254.68
       ```
      
  3. In the Google Cloud console, get the name, region, and Google Cloud project name for the corrupted VPN tunnel. For example:

    VPN_TUNNEL=VPNTunnel1
    REGION=US-East1
    VPC_PROJECT_ID=VPC-Project-1
    
  4. Delete the corrupted BGP session from the Cloud Router configuration.

  5. Create a new Cloud Router interface:

    gcloud compute routers add-interface --interface-name=INTERFACE_NAME \
       --vpn-tunnel=TUNNEL_NAME \ 
       --ip-address=ROUTER_BGP_IP \
       --project=VPC_PROJECT_ID \
       --region=REGION \      
       --mask-length=30
    

    Replace the following:

    • INTERFACE_NAME: a descriptive name that uniquely identifies this interface.
    • TUNNEL_NAME: the name of the VPN tunnel that you obtained in the previous step.
    • ROUTER_BGP_IP: the BGP IP address of the Cloud Router that you obtained earlier in this procedure.
    • VPC_PROJECT_ID: the ID of the target VPC Google Cloud project.
    • REGION: the Google Cloud region in which the target VPC Google Cloud project has been created.
  6. Create the BGP peer:

    gcloud compute routers add-bgp-peer --interface=INTERFACE_NAME \
       --peer-name=TUNNEL_NAME \
       --region REGION \
       --project=VPC_PROJECT_ID \
       --peer-ip-address=GDCE_BGP_IP \
       --peer-asn=GDCE_BGP_ASN \
       --advertised-route-priority=100 \
       --advertisement-mode=DEFAULT
    

    Replace the following:

    • INTERFACE_NAME: the name of the interface that you created in the previous step.
    • TUNNEL_NAME: the name of the VPN tunnel that you used to create the interface in the previous step.
    • REGION: the Google Cloud region in which the target VPC Google Cloud project is created.
    • VPC_PROJECT_ID: the ID of the target VPC Google Cloud project.
    • GDCE_BGP_IP: the Distributed Cloud Edge peer BGP IP address that you obtained earlier in this procedure.
    • GDCE_BGP_ASN: the Distributed Cloud Edge peer BGP ASN that you obtained earlier in this procedure.

At this point, the BGP session is back up and operational.