보안 비밀 키를 업데이트하려는 경우 또는 보안 비밀 키를 처음 추가하지 않은 경우 다음 안내에 따라 Windows 호스트에 추가할 수 있습니다.
관리를 클릭한 다음 호스트를 선택합니다.
Windows 호스트를 마우스 오른쪽 버튼으로 클릭하고 수정을 선택합니다.
백업 및 DR 에이전트 설정 섹션으로 스크롤하여 비밀 필드를 찾습니다.
앞서 저장한 보안 비밀 키를 보안 비밀 입력란에 붙여넣고 저장을 클릭합니다. 인증서 상태가 유효함으로 변경되었는지 확인합니다.
Windows 서버 호스트에서 로그 및 스크립트 찾기
Microsoft Windows 서버 호스트에서 UDSAgent.logs는 C:\Program Files\Google Cloud Backup and DR\log에 저장됩니다.
Windows 호스트의 애플리케이션에 대한 전처리 및 후처리 작업을 실행하는 스크립트를 만들 수 있습니다. 모든 스크립트를 저장할 새 폴더 C:\Program Files\Google Cloud Backup and DR\scripts를 만듭니다.
로컬 파일 시스템 탐색
이 안내에 따라 로컬 파일 시스템을 추가하려면 다음을 실행해야 합니다.
다음 방법 중 하나로 로컬 파일 시스템을 찾습니다.
백업 및 복구로 이동하여 백업을 선택합니다.
앱 관리자로 이동하여 애플리케이션을 클릭한 다음 애플리케이션 추가를 선택합니다.
모든 앱 카드를 선택합니다. 모든 앱 카드를 선택하면 Microsoft SQL Server 앱도 표시됩니다.
로컬 파일 시스템이 검색되면 애플리케이션 페이지의 파일 시스템 필터를 사용하여 파일 시스템을 찾을 수 있습니다.
클러스터 지원을 위한 서비스 액세스 포인트 IP 주소
파일 시스템이 클러스터 리소스이고 파일 시스템을 호스팅하는 클러스터 노드와 관계없이 백업하려면 클러스터 리소스 IP 주소를 서비스 액세스 포인트 IP로 지정합니다. 이렇게 하면 백업/복구 어플라이언스가 클러스터 리소스 IP를 사용하여 백업 및 DR 에이전트에 연결하고 활성 클러스터 노드에서 파일 시스템을 백업할 수 있습니다.
모든 클러스터 노드에서 백업이 올바르게 작동하려면 모든 클러스터 노드에 백업 및 DR 에이전트를 설치해야 합니다.
[[["이해하기 쉬움","easyToUnderstand","thumb-up"],["문제가 해결됨","solvedMyProblem","thumb-up"],["기타","otherUp","thumb-up"]],[["이해하기 어려움","hardToUnderstand","thumb-down"],["잘못된 정보 또는 샘플 코드","incorrectInformationOrSampleCode","thumb-down"],["필요한 정보/샘플이 없음","missingTheInformationSamplesINeed","thumb-down"],["번역 문제","translationIssue","thumb-down"],["기타","otherDown","thumb-down"]],["최종 업데이트: 2025-09-04(UTC)"],[[["\u003cp\u003eThe Backup and DR service supports backing up Windows server applications like Microsoft SQL Server, SMB, and local file systems, requiring the Backup and DR agent to be installed on the Windows host.\u003c/p\u003e\n"],["\u003cp\u003eTo add a new Windows host, navigate to Manage > Hosts, select "+ Add Host," and complete the form with the host's details, including its name, IP address, and appliance association.\u003c/p\u003e\n"],["\u003cp\u003eIf the Windows server is already added as a Compute Engine instance or a VMware VM, you can edit the existing host instead of adding it again, and must enter the Application Discovery Credentials for the supported databases.\u003c/p\u003e\n"],["\u003cp\u003eA secret key is required for the Backup and DR agent settings and can be added during host setup or afterward by editing the host, and it must be supplied before running the application discovery.\u003c/p\u003e\n"],["\u003cp\u003eLocal file systems can be discovered by going to either Back up & Recover and selecting Back up, or App Manager and then selecting Add application, where all apps can be selected.\u003c/p\u003e\n"]]],[],null,["# Add Windows server hosts to the management console\n\nBackup and DR Service supports Windows server application types that include Microsoft\nSQL Server, SMB, and local file systems. Before you can discover and back up\ndata from these hosts, you must do the following:\n\n- [Install the Backup and DR agent on Windows host](/backup-disaster-recovery/docs/configuration/windows-agent)\n\n- Add the Windows host\n\nAdd Windows host\n----------------\n\nIf you have added the Windows server to Backup and DR as a Compute Engine\ninstance or as a VMware VM, then a host for this VM already exists and you don't\nneed to add it again using the following procedure.\nInstead, find and edit that host and proceed from [step 7](#step7).\n\nUse the following instructions to add a new Windows Server host to management console:\n\n1. Click **Manage** \\\u003e **Hosts**.\n\n2. Select **+ Add Host**.\n\n3. In the **Add Host** form, enter the name and an optional friendly name.\n The name of a host should start with a letter, and can contain letters\n and digits (0-9). Underscore ('_') characters are not valid in host names.\n\n4. Enter the IP address of the host in **IP Address** . Click the **plus sign (+)**\n to add it.\n\n5. In the **Appliances** section, select the management console managed\n appliances that serve this host. If the list is long, you can use the search\n field to find a specific appliance or group of appliances.\n\n6. Leave **Host Type** as **Generic**.\n\n7. Enter **Application Discovery Credentials** to discover and protect the\n database applications on the host. This field is applicable only for\n MariaDB, MaxDB, MySQL, PostgreSQL, SAP ASE, and SAP IQ databases.\n\n8. In the Backup and DR agent settings, complete the following:\n\n - The Backup and DR agent port is normally port 5106. If it is anything else,\n enter the port number here.\n\n - If there are CIFS shares that need to be discovered you must supply a\n username and password that can access those CIFS shares.\n\n - You must supply the secret key generated on the Windows host using the\n instructions\n [Install the Backup and DR agent on a Windows host](/backup-disaster-recovery/docs/configuration/windows-agent)\n or [Regenerate the secret key](/backup-disaster-recovery/docs/configuration/windows-agent#regenerate)\n section. You can add the secret key now or later using the [Add a secret key](#add)\n instructions but before running the application discovery.\n\n9. Click **Add**.\n\n### Add a secret key\n\nIf you want to update the secret key or if you did not add the secret key for\nthe first time, you can add it in the Windows host using the following\ninstructions.\n\n1. Click **Manage** and then select **Hosts**.\n\n2. Right-click the Windows host and choose **Edit**.\n\n3. Scroll to **Backup and DR Agent Settings** section and find the\n **Secret** field.\n\n4. Paste the secret key that you saved earlier in the **Secret** field\n and click **Save** . Ensure the certificate status changes to **Valid**.\n\nFind logs and scripts on Windows server hosts\n---------------------------------------------\n\nOn a Microsoft Windows server host, UDSAgent.logs are stored in\n`C:\\Program Files\\Google Cloud Backup and DR\\log`\n\nYou can create scripts to perform pre- and post- actions on applications on your\nWindows hosts. Create a new folder in which to store all scripts:\n`C:\\Program Files\\Google Cloud Backup and DR\\scripts`.\n| **Note:** The Backup and DR agent can be firewalled out if the host joins a domain after the Backup and DR agent has been installed. If this happens, uninstall and then re-install the Backup and DR agent.\n\nDiscover local file system\n--------------------------\n\nUse these instructions to add local file systems, you must do the following:\n\n1. Discover the local file system in either of these ways:\n\n - Go to **Back up \\& Recover** and select **Back up**.\n\n - Go to **App Manager** , click **Applications** , and then select\n **Add application**.\n\n2. Select the **All Apps** tile. If you select the **All Apps** tile you\n also discover Microsoft SQL Server apps.\n After the local file systems are discovered, you can find them using the\n file system filter in the **Applications** page.\n\nService access point IP address for cluster support\n---------------------------------------------------\n\nIf a file system is a cluster resource and if you want it to be backed up\nirrespective of which cluster node is hosting the file system, specify the\nCluster resource IP address as a Service Access Point IP. This allows the\nbackup/recovery appliance to connect to the Backup and DR agent using the\ncluster resource IP and to back up the file system from the active cluster node.\nFor backup to work correctly across all cluster nodes, the Backup and DR agent\nmust be installed on all cluster nodes."]]
