Assicurati che il pacchetto rpcbind o portmapper sia installato sull'host Linux. Esegui:
# rpm -qa | grep rpcbind
Dovrebbe essere restituito qualcosa di simile a: rpcbind-0.1.6+git20080930-6.15
Se non vedi nulla, devi installare i pacchetti utilizzando YaST o
zypper:
Utilizzo di YaST: # yast2 --install rpcbind
Utilizzo di Zypper: # zypper install rpcbind
Scopri le informazioni del client NFS dall'host Linux
Sull'host deve essere installato un pacchetto e una versione del client NFS approvati da Backup e RE.
Controlla se il servizio portmapper o rpcbind è in esecuzione. Corsa:
# sudo service rpcbind status
Un host Linux Red Hat RHEL 6 o CentOS dovrebbe restituire qualcosa di simile:
rpcbind (pid 1591) is running...
Un host Linux SLES dovrebbe restituire qualcosa di simile:
Checking for service rpcbind running
Se il servizio rpcbind non è in esecuzione sull'host Linux, avvialo con:
# sudo service rpcbind start
Utilizza rpcinfo per elencare i programmi o i servizi RPC registrati. Portmapper deve essere registrato ed eseguito.
# sudo rpcinfo -p
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
Controlla se l'host Linux può effettuare una chiamata RPC ai programmi rpcbind e NFS sull'appliance di backup/ripristino utilizzando quanto segue.
# sudo rpcinfo -T tcp <#vm internal IP> rpcbind
program 100000 version 2 ready and waiting
program 100000 version 3 ready and waiting
program 100000 version 4 ready and waiting
# sudo rpcinfo -T tcp <#vm internal IP> nfs
program 100003 version 2 ready and waiting
program 100003 version 3 ready and waiting
Se i comandi precedenti restituiscono l'output mostrato in precedenza, la connettività NFS dall'host Linux all'appliance di backup/ripristino è buona.
Pianificare le dimensioni del disco di staging
Per alcuni file system di grandi dimensioni, potrebbe essere necessario impostare manualmente le dimensioni del disco di staging per il file system. La dimensione predefinita del disco di staging è NAS capacity + 20%, ma esistono due casi in cui potrebbe non essere sufficiente:
A volte i file system di rete NFS e SMB segnalano erroneamente capacità molto elevate. Se il file system segnala che è superiore a 128 TiB, il backup dell'agente di backup e RE non va a buon fine con il codice di errore 5289: "Le dimensioni riportate del volume protetto richiedono che le dimensioni del disco di staging siano specificate per questa applicazione". Questo errore impedisce al servizio di Backup e DR di allocare un disco enorme non necessario o più grande di quanto possa gestire l'appliance di backup/ripristino.
Anche se il NAS utilizza la deduplica e la compressione sui suoi dischi, il servizio di backup e DR non deduplica né comprime i dati nell'immagine di backup sul disco di staging. Il NAS potrebbe segnalare un utilizzo di 5 TB, ma l'immagine di backup sul disco di staging potrebbe utilizzare molto più spazio. Inoltre, gli amministratori devono specificare una dimensione del disco di staging manuale. Ciò potrebbe comportare un
errore "Disco di staging pieno".
A volte sul NAS sono presenti directory .snapshot contenenti una copia completa dei contenuti del NAS. Si tratta di snapshot virtuali del NAS. L'agente di Backup e RE
cerca di copiare tutti gli snapshot e esaurisce lo spazio. Puoi risolvere il problema utilizzando un pattern di esclusione di .snapshot o ~snapshot (qualsiasi nome utilizzato dal NAS). Consulta la sezione Escludi pattern in.
Informazioni aggiuntive per la preparazione degli host del file system
[[["Facile da capire","easyToUnderstand","thumb-up"],["Il problema è stato risolto","solvedMyProblem","thumb-up"],["Altra","otherUp","thumb-up"]],[["Difficile da capire","hardToUnderstand","thumb-down"],["Informazioni o codice di esempio errati","incorrectInformationOrSampleCode","thumb-down"],["Mancano le informazioni o gli esempi di cui ho bisogno","missingTheInformationSamplesINeed","thumb-down"],["Problema di traduzione","translationIssue","thumb-down"],["Altra","otherDown","thumb-down"]],["Ultimo aggiornamento 2025-09-04 UTC."],[[["\u003cp\u003eThis guide provides instructions on ensuring NFS connectivity for Backup and DR services on both Red Hat/CentOS and SLES Linux hosts.\u003c/p\u003e\n"],["\u003cp\u003eTo verify if the NFS client is installed, run \u003ccode\u003erpm -qa | grep nfs\u003c/code\u003e, and if not found, use \u003ccode\u003eyum\u003c/code\u003e or \u003ccode\u003eYaST/zypper\u003c/code\u003e to install \u003ccode\u003enfs-utils\u003c/code\u003e and \u003ccode\u003enfs-client\u003c/code\u003e respectively.\u003c/p\u003e\n"],["\u003cp\u003eThe \u003ccode\u003erpcbind\u003c/code\u003e service, or portmapper, is essential for NFS operations and needs to be installed (using \u003ccode\u003eyum\u003c/code\u003e or \u003ccode\u003eYaST/zypper\u003c/code\u003e if it is not present) and running, verified with \u003ccode\u003e# sudo service rpcbind status\u003c/code\u003e and started with \u003ccode\u003e# sudo service rpcbind start\u003c/code\u003e.\u003c/p\u003e\n"],["\u003cp\u003eYou can confirm NFS connectivity by using \u003ccode\u003erpcinfo\u003c/code\u003e commands to check for registered RPC programs and to verify that the Linux host can make RPC calls to \u003ccode\u003erpcbind\u003c/code\u003e and NFS on the backup/recovery appliance.\u003c/p\u003e\n"],["\u003cp\u003eStaging disk size may need manual adjustment due to large file system capacity reporting errors or because the Backup and DR service does not deduplicate data on staging disks, and it is possible to use exclude patterns to avoid backing up \u003ccode\u003e.snapshot\u003c/code\u003e directories.\u003c/p\u003e\n"]]],[],null,["# Prepare Filestore and other file systems for Backup and DR Service\n\nThis page includes information on how to ensure there is NFS connectivity for\nBackup and DR.\n\nInstall the NFS client on a Red Hat RHEL 6 or CentOS Linux host\n---------------------------------------------------------------\n\nSee if the client is installed by running: `# rpm -qa | grep nfs`\n\nThis should return something like: \n\n nfs-utils-lib-1.1.5-9.el6.x86_64\n nfs-utils-1.2.3-54.el6.x86_64\n\n- If you see nothing, then use yum to install the NFS client packages. Run: `# yum install nfs-utils nfs-utils-lib`\n- Make sure rpcbind /portmapper package is installed on the Linux host. Run:`# rpm -qa | grep rpcbind`\n\nThis should return something like: `rpcbind-0.2.0-11.el6.x86_64`\n\n- If you see nothing, then use yum to install the rpcbind. Run: `# yum install rpcbind`\n\nInstall the NFS client on a SLES Linux host\n-------------------------------------------\n\n1. To see if the client is installed, run: `# rpm -qa | grep nfs`\n\n This should return something similar to: \n\n nfs-client-1.2.1-2.6.6\n yast2-nfs-common-2.17.7-1.1.2\n yast2-nfs-client-2.17.12-0.1.81\n\n2. If you don't see either nfs-client or yast2-nfs-xxxx packages, then use\n either YaST or zypper to install the NFS client packages.\n\n - Using YaST:\n\n # yast2 --install yast2-nfs-client\n # yast2 --install yast2-nfs-common\n\n - Using Zypper:`# zypper install nfs-client`\n3. Ensure that rpcbind or portmapper package is installed on the Linux host. Run:\n `# rpm -qa | grep rpcbind`\n This should return something like: rpcbind-0.1.6+git20080930-6.15\n\n4. If you see nothing, then you must install the packages using either YaST or\n zypper:\n\n - Using YaST: `# yast2 --install rpcbind`\n - Using Zypper: `# zypper install rpcbind`\n\nLearn NFS client information from the Linux host\n------------------------------------------------\n\nA Backup and DR-approved NFS client package and version must be installed on\nthe host.\n\n1. Check if the portmapper or rpcbind service is running. Run:\n `# sudo service rpcbind status`\n\n - A Red Hat RHEL 6 or CentOS Linux host should return something like: `rpcbind (pid 1591) is running...`\n - An SLES Linux host should return something like: `Checking for service rpcbind running`\n2. If rpcbind service is not running on Linux host, start it with:\n `# sudo service rpcbind start`\n\n3. Use rpcinfo to list the registered RPC programs or services. Portmapper\n must be registered and running.\n\n # sudo rpcinfo -p\n program vers proto port service\n 100000 4 tcp 111 portmapper\n 100000 3 tcp 111 portmapper\n 100000 2 tcp 111 portmapper\n 100000 4 udp 111 portmapper\n 100000 3 udp 111 portmapper\n 100000 2 udp 111 portmapper\n\n4. Check if the Linux host can make an RPC call to rpcbind and NFS programs on\n the backup/recovery appliance using the following.\n\n # sudo rpcinfo -T tcp \u003c#vm internal IP\u003e rpcbind\n program 100000 version 2 ready and waiting\n program 100000 version 3 ready and waiting\n program 100000 version 4 ready and waiting\n # sudo rpcinfo -T tcp \u003c#vm internal IP\u003e nfs\n program 100003 version 2 ready and waiting\n program 100003 version 3 ready and waiting\n\nIf the preceding commands return the output shown earlier, then NFS connectivity from\nLinux host to the backup/recovery appliance is good.\n\nPlanning staging disk size\n--------------------------\n\nFor some large filesystems, you may have to manually set the staging disk size\nfor the file system. The default staging disk size is `NAS capacity + 20%`,\nbut there are two cases in which this may be insufficient:\n\n- NFS and SMB network file systems sometimes incorrectly report very large\n capacities. In cases where the file system reports that it is over 128TiB the\n Backup and DR agent fails the backup with error code 5289:\n \"The reported size of the protected volume requires that the staging disk size\n is specified for this application\". This error prevents Backup and DR Service\n from allocating a huge disk that is not needed or that is larger than the\n backup/recovery appliance can handle.\n\n- Even if your NAS is using dedup and compression on its disks,\n Backup and DR Service does not deduplicate or compress data in the backup image on\n the staging disk. Your NAS may report usage of 5TB, but the backup image on\n the staging disk may use significantly more space. This also requires that the\n administrators specify a manual staging disk size. This may result in a\n \"staging disk full\" error.\n\nIf you see either of these errors, then manually set the staging disk size in\n[Application Details and Settings](/backup-disaster-recovery/docs/backup/app-details-settings-filesystems).\n\nVirtual snapshots in a .snapshot directory\n------------------------------------------\n\nSometimes on the NAS there are .snapshot directories containing a full copy of\nthe NAS contents. These are virtual snapshots of the NAS. The Backup and DR agent\ntries to copy all of those snapshots and runs out of space. You can remedy this\nby using an exclude pattern of `.snapshot` or `~snapshot` (whatever name the NAS\nuses). See [Exclude patterns in](/backup-disaster-recovery/docs/backup/app-details-settings-filesystems).\n\nAdditional information for preparing file system hosts\n------------------------------------------------------\n\nAdditional information relevant to preparing a file system host for protection\nare in [Manage hosts and their connected applications](/backup-disaster-recovery/docs/configuration/manage-hosts-and-their-applications)."]]
