Create a Google Distributed Cloud hybrid cluster on Compute Engine VMs

This page shows you how to set up a Google Distributed Cloud hybrid cluster in High Availability (HA) mode using Virtual Machines (VMs) running on Compute Engine.

You can try out Google Distributed Cloud quickly and without having to prepare any hardware. Completing the steps on this page provides you with a working Google Distributed Cloud test environment that runs on Compute Engine.

To try Google Distributed Cloud on Compute Engine VMs, complete the following steps:

  1. Create six VMs in Compute Engine
  2. Create a vxlan network between all VMs with L2 connectivity
  3. Install prerequisites for Google Distributed Cloud
  4. Deploy a Google Distributed Cloud hybrid cluster

  5. Verify your cluster

Before you begin

  1. Sign in to your Google Cloud account. If you're new to Google Cloud, create an account to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.
  2. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

    Go to project selector

  3. Make sure that billing is enabled for your Google Cloud project.

  4. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

    Go to project selector

  5. Make sure that billing is enabled for your Google Cloud project.

  6. Make a note of the project ID because you need it to set an environment variable that is used in the scripts and commands on this page. If you selected an existing project, make sure that you are either a project owner or editor.
  7. On your Linux workstation, make sure you have installed the latest Google Cloud CLI, the command line tool for interacting with Google Cloud. If you already have gcloud CLI installed, update its components by running the following command:
    gcloud components update

    Depending on how the gcloud CLI was installed, you might see the following message: "You cannot perform this action because the Google Cloud CLI component manager is disabled for this installation. You can run the following command to achieve the same result for this installation:" Follow the instructions to copy and paste the command to update the components.

The steps in this guide are taken from the installation script in the anthos-samples repository. The FAQ section has more information on how to customize this script to work with some popular variations.

Create six VMs in Compute Engine

Complete these steps to create the following VMs:

  • One VM for the admin workstation. An admin workstation hosts command-line interface (CLI) tools and configuration files to provision clusters during installation, and CLI tools for interacting with provisioned clusters post-installation. The admin workstation will have access to all the other nodes in the cluster via SSH.
  • Three VMs for the three control plane nodes needed to run the Google Distributed Cloud control plane.
  • Two VMs for the two worker nodes needed to run workloads on the Google Distributed Cloud cluster.
  1. Setup environment variables:

    export PROJECT_ID=PROJECT_ID
    export ZONE=ZONE
    export CLUSTER_NAME=CLUSTER_NAME
    export BMCTL_VERSION=1.15.11
    

    For the ZONE, you can use us-central1-a or any of the other Compute Engine zones .

  2. Run the following commands to log in with your Google account and set your project as the default:

    gcloud auth login
    gcloud config set project $PROJECT_ID
    gcloud config set compute/zone $ZONE
    
  3. Create the baremetal-gcr service account:

    gcloud iam service-accounts create baremetal-gcr
    
    gcloud iam service-accounts keys create bm-gcr.json \
        --iam-account=baremetal-gcr@"${PROJECT_ID}".iam.gserviceaccount.com
  4. Enable Google Cloud APIs and services:

    gcloud services enable \
        anthos.googleapis.com \
        anthosaudit.googleapis.com \
        anthosgke.googleapis.com \
        cloudresourcemanager.googleapis.com \
        connectgateway.googleapis.com \
        container.googleapis.com \
        gkeconnect.googleapis.com \
        gkehub.googleapis.com \
        serviceusage.googleapis.com \
        stackdriver.googleapis.com \
        monitoring.googleapis.com \
        logging.googleapis.com \
        opsconfigmonitoring.googleapis.com \
        compute.googleapis.com \
        gkeonprem.googleapis.com \
        iam.googleapis.com \
        kubernetesmetadata.googleapis.com
  5. Give the baremetal-gcr service account additional permissions to avoid needing multiple service accounts for different APIs and services:

    gcloud projects add-iam-policy-binding "$PROJECT_ID" \
      --member="serviceAccount:baremetal-gcr@$PROJECT_ID.iam.gserviceaccount.com" \
      --role="roles/gkehub.connect" \
      --no-user-output-enabled
    
    gcloud projects add-iam-policy-binding "$PROJECT_ID" \
      --member="serviceAccount:baremetal-gcr@$PROJECT_ID.iam.gserviceaccount.com" \
      --role="roles/gkehub.admin" \
      --no-user-output-enabled
    
    gcloud projects add-iam-policy-binding "$PROJECT_ID" \
      --member="serviceAccount:baremetal-gcr@$PROJECT_ID.iam.gserviceaccount.com" \
      --role="roles/logging.logWriter" \
      --no-user-output-enabled
    
    gcloud projects add-iam-policy-binding "$PROJECT_ID" \
      --member="serviceAccount:baremetal-gcr@$PROJECT_ID.iam.gserviceaccount.com" \
      --role="roles/monitoring.metricWriter" \
      --no-user-output-enabled
    
    gcloud projects add-iam-policy-binding "$PROJECT_ID" \
      --member="serviceAccount:baremetal-gcr@$PROJECT_ID.iam.gserviceaccount.com" \
      --role="roles/monitoring.dashboardEditor" \
      --no-user-output-enabled
    
    gcloud projects add-iam-policy-binding "$PROJECT_ID" \
      --member="serviceAccount:baremetal-gcr@$PROJECT_ID.iam.gserviceaccount.com" \
      --role="roles/stackdriver.resourceMetadata.writer" \
      --no-user-output-enabled
    
    gcloud projects add-iam-policy-binding "$PROJECT_ID" \
      --member="serviceAccount:baremetal-gcr@$PROJECT_ID.iam.gserviceaccount.com" \
      --role="roles/opsconfigmonitoring.resourceMetadata.writer" \
      --no-user-output-enabled
    
    gcloud projects add-iam-policy-binding "$PROJECT_ID" \
        --member="serviceAccount:baremetal-gcr@$PROJECT_ID.iam.gserviceaccount.com" \
        --role="roles/kubernetesmetadata.publisher" \
        --no-user-output-enabled
    
    gcloud projects add-iam-policy-binding "$PROJECT_ID" \
      --member="serviceAccount:baremetal-gcr@$PROJECT_ID.iam.gserviceaccount.com" \
      --role="roles/monitoring.viewer" \
      --no-user-output-enabled
    
    gcloud projects add-iam-policy-binding "$PROJECT_ID" \
      --member="serviceAccount:baremetal-gcr@$PROJECT_ID.iam.gserviceaccount.com" \
      --role="roles/serviceusage.serviceUsageViewer" \
      --no-user-output-enabled
  6. Create the variables and arrays needed for all the commands on this page:

    MACHINE_TYPE=n1-standard-8
    VM_PREFIX=abm
    VM_WS=$VM_PREFIX-ws
    VM_CP1=$VM_PREFIX-cp1
    VM_CP2=$VM_PREFIX-cp2
    VM_CP3=$VM_PREFIX-cp3
    VM_W1=$VM_PREFIX-w1
    VM_W2=$VM_PREFIX-w2
    declare -a VMs=("$VM_WS" "$VM_CP1" "$VM_CP2" "$VM_CP3" "$VM_W1" "$VM_W2")
    declare -a IPs=()
  7. Use the following loop to create six VMs:

    for vm in "${VMs[@]}"
    do
        gcloud compute instances create "$vm" \
          --image-family=ubuntu-2004-lts --image-project=ubuntu-os-cloud \
          --zone="${ZONE}" \
          --boot-disk-size 200G \
          --boot-disk-type pd-ssd \
          --can-ip-forward \
          --network default \
          --tags http-server,https-server \
          --min-cpu-platform "Intel Haswell" \
          --enable-nested-virtualization \
          --scopes cloud-platform \
          --machine-type "$MACHINE_TYPE" \
          --metadata "cluster_id=${CLUSTER_NAME},bmctl_version=${BMCTL_VERSION}"
        IP=$(gcloud compute instances describe "$vm" --zone "${ZONE}" \
             --format='get(networkInterfaces[0].networkIP)')
        IPs+=("$IP")
    done

    This command creates VM instances with the following names:

    • abm-ws: The VM for the admin workstation.
    • abm-cp1, abm-cp2, abm-cp3: The VMs for the control plane nodes.
    • abm-w1, abm-w2: The VMs for the nodes that run workloads.
  8. Use the following loop to verify that SSH is ready on all VMs:

    for vm in "${VMs[@]}"
    do
        while ! gcloud compute ssh root@"$vm" --zone "${ZONE}" --command "printf 'SSH to $vm succeeded\n'"
        do
            printf "Trying to SSH into %s failed. Sleeping for 5 seconds. zzzZZzzZZ" "$vm"
            sleep  5
        done
    done

Create a vxlan network with L2 connectivity between VMs

Use the standard vxlan functionality of Linux to create a network that connects all the VMs with L2 connectivity.

The following command contains two loops that perform the following actions:

  1. SSH into each VM.
  2. Update and install needed packages.
  3. Execute the required commands to configure the network with vxlan.

    i=2 # We start from 10.200.0.2/24
    for vm in "${VMs[@]}"
    do
        gcloud compute ssh root@"$vm" --zone "${ZONE}" << EOF
            apt-get -qq update > /dev/null
            apt-get -qq install -y jq > /dev/null
            set -x
            ip link add vxlan0 type vxlan id 42 dev ens4 dstport 0
            current_ip=\$(ip --json a show dev ens4 | jq '.[0].addr_info[0].local' -r)
            printf "VM IP address is: \$current_ip"
            for ip in ${IPs[@]}; do
                if [ "\$ip" != "\$current_ip" ]; then
                    bridge fdb append to 00:00:00:00:00:00 dst \$ip dev vxlan0
                fi
            done
            ip addr add 10.200.0.$i/24 dev vxlan0
            ip link set up dev vxlan0
    
    EOF
        i=$((i+1))
    done

You now have L2 connectivity within the 10.200.0.0/24 network. The VMs have the following IP addresses:

  • Admin workstation VM: 10.200.0.2
  • VMs running the control plane nodes:
    • 10.200.0.3
    • 10.200.0.4
    • 10.200.0.5
  • VMs running the worker nodes:
    • 10.200.0.6
    • 10.200.0.7

Install prerequisites for Google Distributed Cloud

You need to install the following tools on the admin workstation before installing Google Distributed Cloud:

  • bmctl
  • kubectl
  • Docker

To install the tools and prepare for Google Distributed Cloud installation:

  1. Run the following commands to download the service account key to the admin workstation and install the required tools:

    gcloud compute ssh root@$VM_WS --zone "${ZONE}" << EOF
    set -x
    
    export PROJECT_ID=\$(gcloud config get-value project)
    BMCTL_VERSION=\$(curl http://metadata.google.internal/computeMetadata/v1/instance/attributes/bmctl_version -H "Metadata-Flavor: Google")
    export BMCTL_VERSION
    
    gcloud iam service-accounts keys create bm-gcr.json \
      --iam-account=baremetal-gcr@\${PROJECT_ID}.iam.gserviceaccount.com
    
    curl -LO "https://storage.googleapis.com/kubernetes-release/release/$(curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt)/bin/linux/amd64/kubectl"
    
    chmod +x kubectl
    mv kubectl /usr/local/sbin/
    mkdir baremetal && cd baremetal
    gsutil cp gs://anthos-baremetal-release/bmctl/$BMCTL_VERSION/linux-amd64/bmctl .
    chmod a+x bmctl
    mv bmctl /usr/local/sbin/
    
    cd ~
    printf "Installing docker"
    curl -fsSL https://get.docker.com -o get-docker.sh
    sh get-docker.sh
    EOF
  2. Run the following commands to ensure that root@10.200.0.x works. The commands perform these tasks:

    1. Generate a new SSH key on the admin workstation.
    2. Add the public key to all the other VMs in the deployment.
    gcloud compute ssh root@$VM_WS --zone "${ZONE}" << EOF
    set -x
    ssh-keygen -t rsa -N "" -f /root/.ssh/id_rsa
    sed 's/ssh-rsa/root:ssh-rsa/' ~/.ssh/id_rsa.pub > ssh-metadata
    for vm in ${VMs[@]}
    do
        gcloud compute instances add-metadata \$vm --zone ${ZONE} --metadata-from-file ssh-keys=ssh-metadata
    done
    EOF

Deploy a Google Distributed Cloud hybrid cluster

The following code block contains all commands and configurations needed to complete the following tasks:

  1. Create the configuration file for the needed hybrid cluster.
  2. Run the preflight checks.
  3. Deploy the cluster.
gcloud compute ssh root@$VM_WS --zone "${ZONE}" <<EOF
set -x
export PROJECT_ID=$(gcloud config get-value project)
CLUSTER_NAME=\$(curl http://metadata.google.internal/computeMetadata/v1/instance/attributes/cluster_id -H "Metadata-Flavor: Google")
BMCTL_VERSION=\$(curl http://metadata.google.internal/computeMetadata/v1/instance/attributes/bmctl_version -H "Metadata-Flavor: Google")
export CLUSTER_NAME
export BMCTL_VERSION
bmctl create config -c \$CLUSTER_NAME
cat > bmctl-workspace/\$CLUSTER_NAME/\$CLUSTER_NAME.yaml << EOB
---
gcrKeyPath: /root/bm-gcr.json
sshPrivateKeyPath: /root/.ssh/id_rsa
gkeConnectAgentServiceAccountKeyPath: /root/bm-gcr.json
gkeConnectRegisterServiceAccountKeyPath: /root/bm-gcr.json
cloudOperationsServiceAccountKeyPath: /root/bm-gcr.json
---
apiVersion: v1
kind: Namespace
metadata:
  name: cluster-\$CLUSTER_NAME
---
apiVersion: baremetal.cluster.gke.io/v1
kind: Cluster
metadata:
  name: \$CLUSTER_NAME
  namespace: cluster-\$CLUSTER_NAME
spec:
  type: hybrid
  anthosBareMetalVersion: \$BMCTL_VERSION
  gkeConnect:
    projectID: \$PROJECT_ID
  controlPlane:
    nodePoolSpec:
      clusterName: \$CLUSTER_NAME
      nodes:
      - address: 10.200.0.3
      - address: 10.200.0.4
      - address: 10.200.0.5
  clusterNetwork:
    pods:
      cidrBlocks:
      - 192.168.0.0/16
    services:
      cidrBlocks:
      - 172.26.232.0/24
  loadBalancer:
    mode: bundled
    ports:
      controlPlaneLBPort: 443
    vips:
      controlPlaneVIP: 10.200.0.49
      ingressVIP: 10.200.0.50
    addressPools:
    - name: pool1
      addresses:
      - 10.200.0.50-10.200.0.70
  clusterOperations:
    # might need to be this location
    location: us-central1
    projectID: \$PROJECT_ID
  storage:
    lvpNodeMounts:
      path: /mnt/localpv-disk
      storageClassName: node-disk
    lvpShare:
      numPVUnderSharedPath: 5
      path: /mnt/localpv-share
      storageClassName: local-shared
  nodeConfig:
    podDensity:
      maxPodsPerNode: 250
---
apiVersion: baremetal.cluster.gke.io/v1
kind: NodePool
metadata:
  name: node-pool-1
  namespace: cluster-\$CLUSTER_NAME
spec:
  clusterName: \$CLUSTER_NAME
  nodes:
  - address: 10.200.0.6
  - address: 10.200.0.7
EOB

bmctl create cluster -c \$CLUSTER_NAME
EOF

Verify your cluster

You can find your cluster's kubeconfig file on the admin workstation in the bmctl-workspace directory of the root account. To verify your deployment, complete the following steps.

  1. SSH into the admin workstation as root:

    gcloud compute ssh root@abm-ws --zone ${ZONE}
    

    You can ignore any messages about updating the VM and complete this tutorial. If you plan to keep the VMs as a test environment, you might want to update the OS or upgrade to the next release as described in the Ubuntu documentation.

  2. Set the KUBECONFIG environment variable with the path to the cluster's configuration file to run kubectl commands on the cluster.

    export clusterid=CLUSTER_NAME
    export KUBECONFIG=$HOME/bmctl-workspace/$clusterid/$clusterid-kubeconfig
    kubectl get nodes
    
  3. Set the current context in an environment variable:

    export CONTEXT="$(kubectl config current-context)"
    
  4. Run the following gcloud command. This command:

    • Grants your user account the Kubernetes clusterrole/cluster-admin role on the cluster.
    • Configures the cluster so that you can run kubectl commands on your local computer without having to SSH to the admin workstation.

    Replace GOOGLE_ACCOUNT_EMAIL with the email address that is associated with your Google Cloud account. For example: --users=alex@example.com.

    gcloud container fleet memberships generate-gateway-rbac  \
        --membership=CLUSTER_NAME \
        --role=clusterrole/cluster-admin \
        --users=GOOGLE_ACCOUNT_EMAIL \
        --project=PROJECT_ID \
        --kubeconfig=$KUBECONFIG \
        --context=$CONTEXT\
        --apply
    

    The output of this command is similar to the following, which is truncated for readability:

    Validating input arguments.
    Specified Cluster Role is: clusterrole/cluster-admin
    Generated RBAC policy is:
    --------------------------------------------
    ...
    
    Applying the generate RBAC policy to cluster with kubeconfig: /root/bmctl-workspace/CLUSTER_NAME/CLUSTER_NAME-kubeconfig, context: CLUSTER_NAME-admin@CLUSTER_NAME
    Writing RBAC policy for user: GOOGLE_ACCOUNT_EMAIL to cluster.
    Successfully applied the RBAC policy to cluster.
    
  5. When you are finished exploring, enter exit to log out of the admin workstation.

  6. Get the kubeconfig entry that can access the cluster through the Connect gateway.

    gcloud container fleet memberships get-credentials CLUSTER_NAME
    

    The output is similar to the following:

    Starting to build Gateway kubeconfig...
    Current project_id: PROJECT_ID
    A new kubeconfig entry "connectgateway_PROJECT_ID_global_CLUSTER_NAME" has been generated and set as the current context.
    
  7. You can now run kubectl commands through the Connect gateway:

    kubectl get nodes
    kubectl get namespaces
    

Log in to your cluster from Google Cloud console

To observe your workloads on Google Distributed Cloud in the Google Cloud console, you need to log in to the cluster. Before you log in to the console for the first time, you need to configure an authentication method. The easiest authentication method to configure is Google identity. This authentication method lets you log in using the email address associated with your Google Cloud account.

The gcloud container fleet memberships generate-gateway-rbac command that you ran in the previous section configures the cluster so that you can log in with your Google identity.

  1. In the Google Cloud console, go to the GKE Clusters page.

    Go to GKE clusters

  2. Click Actions next to the registered cluster, then click Login.

  3. Select Use your Google identity to log in.

  4. Click Login.

Clean up

  1. Connect to the admin workstation to reset the cluster VMs to their state prior to installation and unregister the cluster from your Google Cloud project:

    gcloud compute ssh root@abm-ws --zone ${ZONE} << EOF
    set -x
    export clusterid=CLUSTER_NAME
    bmctl reset -c \$clusterid
    EOF
    
  2. List all VMs that have abm in their name:

    gcloud compute instances list | grep 'abm'
    
  3. Verify that you're fine with deleting all VMs that contain abm in the name.

    After you've verified, you can delete abm VMs by running the following command:

    gcloud compute instances list --format="value(name)" | grep 'abm'  | xargs gcloud \
        --quiet compute instances delete