Customize your AlloyDB Omni installation

Note: Your use of AlloyDB Omni is subject to the agreement between you and Google that governs Google Cloud offerings. If you do not have a Google Cloud account, or have not otherwise entered into an agreement with Google that governs Google Cloud offerings, please do not proceed or download this software until you have done so. To create a Google Cloud account, see the Google Cloud homepage.

AlloyDB Omni is deployed through a Docker image, which allows different forms of customization. This page shows some of the common customizations that are used.

To get started quickly with AlloyDB Omni using the default configuration, see Quickstart: AlloyDB Omni.

Before you begin

The following table lists recommended hardware and software configuration for AlloyDB Omni.

OS/Platform	Recommended hardware configuration	Recommended software configuration
Linux	x86-64 or Arm (*) CPU with AVX2 support 8GB of RAM for every CPU allocated to AlloyDB Omni 20+ GB of disk space	Debian based OS (Ubuntu, etc.), RHEL 8 or 9 Linux kernel version 6.1 or higher or any Linux kernel version older than 5.3 that has support for the MADV_COLLAPSE and MADV_POPULATE_WRITE directives Cgroupsv2 enabled Docker Engine 25.0.0+ or Podman 5.0.0+
macOS	Intel CPU with AVX2 support or M-chip 8GB of RAM for every CPU allocated to AlloyDB Omni 20+ GB of disk space	Docker Desktop 4.30 or higher
(*) Arm support is in Preview.

AlloyDB Omni runs in a container. Install a container runtime like Docker or Podman on your machine before installing AlloyDB Omni.

Podman commands are provided for a rootless container running on disabled Security-Enhanced Linux (SELinux).

Single-server

Mount an external data directory

By default, the command in the Quickstart: Install AlloyDB Omni stores the database data in an area managed by Docker. This is convenient for getting started but makes it difficult to find and use the data directory. Instead, you can set up a bind mount to map the data directory to a known location on your disk.

Docker

docker run --name CONTAINER_NAME \
-e POSTGRES_PASSWORD=NEW_PASSWORD \
-v DATA_DIR:/var/lib/postgresql/data \
-p HOST_PORT:5432 -d google/alloydbomni

Replace the following:

• CONTAINER_NAME: the name to assign this new AlloyDB Omni container in your host machine's container registry—for example, my-omni.

• NEW_PASSWORD: the password assigned the new container's postgres user after its creation.

• DATA_DIR: the file system path that you want AlloyDB Omni to use for its data directory.

• HOST_PORT: the TCP port on the host machine to which the container publishes port 5432. To use the PostgreSQL default port on the host machine as well, specify 5432.

Podman

podman run --name CONTAINER_NAME \
-e POSTGRES_PASSWORD=NEW_PASSWORD \
-v DATA_DIR:/var/lib/postgresql/data \
-p HOST_PORT:5432 -d google/alloydbomni

Replace the following:

• CONTAINER_NAME: the name to assign this new AlloyDB Omni container in your host machine's container registry—for example, my-omni.

• NEW_PASSWORD: the password assigned the new container's postgres user after its creation.

• DATA_DIR: the file system path that you want AlloyDB Omni to use for its data directory.

• HOST_PORT: the TCP port on the host machine to which the container publishes port 5432. To use the PostgreSQL default port on the host machine as well, specify 5432.

Podman

podman run --name CONTAINER_NAME \
-e POSTGRES_PASSWORD=NEW_PASSWORD \
-v DATA_DIR:/var/lib/postgresql/data \
-p HOST_PORT:5432 -d google/alloydbomni

Replace the following:

• CONTAINER_NAME: the name to assign this new AlloyDB Omni container in your host machine's container registry—for example, my-omni.

• NEW_PASSWORD: the password assigned the new container's postgres user after its creation.

• DATA_DIR: the file system path that you want AlloyDB Omni to use for its data directory.

• HOST_PORT: the TCP port on the host machine to which the container publishes port 5432. To use the PostgreSQL default port on the host machine as well, specify 5432.

Enable ulimits

The ulimit parameters specify process limits that the Docker container can use. For optimal performance, we recommend that you set the following ulimits:

• nice=-20:-20: AlloyDB Omni adjusts process priorities to allow critical PostgreSQL processes to run with higher priority. The higher priority gives the processes a bigger allocation of available CPUs. To adjust process priorities, specify --ulimit=nice=-20:-20, which removes limitations for the AlloyDB Omni container.

• memlock=-1:-1: AlloyDB Omni performs automatic memory management. Setting --ulimit=memlock=-1:-1 allows the database to better control how memory pages are swapped in and out, which can result in better performance.

Docker

docker run --name CONTAINER_NAME \
-e POSTGRES_PASSWORD=NEW_PASSWORD \
--ulimit=nice=-20:-20 --ulimit=memlock=-1:-1 \
-p HOST_PORT:5432 -d google/alloydbomni

Podman

podman run --name CONTAINER_NAME \
-e POSTGRES_PASSWORD=NEW_PASSWORD \
--ulimit=nice=-20:-20 --ulimit=memlock=-1:-1 \
-p HOST_PORT:5432 -d google/alloydbomni

Specify a logging driver

By default, Docker does not perform log rotations. This can use up a lot of disk space, and eventually lead to disk space exhaustion. You can configure Docker to use a different logging driver. For example, to log to journald:

Docker

docker run --name CONTAINER_NAME \
-e POSTGRES_PASSWORD=NEW_PASSWORD \
--log-driver=journald \
-p HOST_PORT:5432 -d google/alloydbomni

Podman

podman run --name CONTAINER_NAME \
-e POSTGRES_PASSWORD=NEW_PASSWORD \
--log-driver=journald \
-p HOST_PORT:5432 -d google/alloydbomni

For more information about Docker and logging drivers, refer to Docker's documentation Configure logging drivers.

You can also configure logging using PostgreSQL. For more information, refer to PostgreSQL documentation Error reporting and logging.

Warning: In AlloyDB Omni only, setting the alloydb.enable_pgaudit flag to true and you set the PostgreSQL logging_collector parameter to on, you might experience a loss of audit logs.

Mount a shared memory volume

If you plan to use the AlloyDB columnar engine with AlloyDB Omni, we recommend making shared memory available to the AlloyDB Omni container. The method for doing this differs depending upon your host operating system, as shown in the following examples.

Linux

To make shared memory available to the container, mount /dev/shm:

Docker

  docker run --name CONTAINER_NAME \
    -e POSTGRES_PASSWORD=NEW_PASSWORD \
    -p HOST_PORT:5432 \
    -v /dev/shm:/dev/shm \
    -d google/alloydbomni

Podman

  podman run --name CONTAINER_NAME \
    -e POSTGRES_PASSWORD=NEW_PASSWORD \
    -p HOST_PORT:5432 \
    -v /dev/shm:/dev/shm \
    -d google/alloydbomni

macOS

To make shared memory available to the container, include the --shm-size flag:

Docker

  docker run --name CONTAINER_NAME \
    -e POSTGRES_PASSWORD=NEW_PASSWORD \
    -p HOST_PORT:5432 \
    --shm-size=SHARED_MEMORY_SIZE \
    -d google/alloydbomni

Replace SHARED_MEMORY_SIZE with the size to set for /dev/shm on the container, in the format described on Running containers. For example, to specify one gigabyte, use the value 1g.

Podman

  podman run --name CONTAINER_NAME \
    -e POSTGRES_PASSWORD=NEW_PASSWORD \
    -p HOST_PORT:5432 \
    --shm-size=SHARED_MEMORY_SIZE \
    -d google/alloydbomni

Replace SHARED_MEMORY_SIZE with the size to set for /dev/shm on the container, in the format described on Running containers. For example, to specify one gigabyte, use the value 1g.

We recommend setting the shared memory size to a number of megabytes equal to at least your database's value of the google_job_scheduler.max_parallel_workers_per_job flag, times 250. For more information about the columnar engine, see Configure the columnar engine in AlloyDB Omni.

For example, if the google_job_scheduler.max_parallel_workers_per_job database flag is set to its default value of 2, consider adding a flag of --shm-size=500m or greater when starting your database server.

For more information about the --shm-size flag, see Running containers.